Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Enable memcg accounting for various networking objects.

  BPF:

   - Introduce bpf timers.

   - Add perf link and opaque bpf_cookie which the program can read out
     again, to be used in libbpf-based USDT library.

   - Add bpf_task_pt_regs() helper to access user space pt_regs in
     kprobes, to help user space stack unwinding.

   - Add support for UNIX sockets for BPF sockmap.

   - Extend BPF iterator support for UNIX domain sockets.

   - Allow BPF TCP congestion control progs and bpf iterators to call
     bpf_setsockopt(), e.g. to switch to another congestion control
     algorithm.

  Protocols:

   - Support IOAM Pre-allocated Trace with IPv6.

   - Support Management Component Transport Protocol.

   - bridge: multicast: add vlan support.

   - netfilter: add hooks for the SRv6 lightweight tunnel driver.

   - tcp:
       - enable mid-stream window clamping (by user space or BPF)
       - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
       - more accurate DSACK processing for RACK-TLP

   - mptcp:
       - add full mesh path manager option
       - add partial support for MP_FAIL
       - improve use of backup subflows
       - optimize option processing

   - af_unix: add OOB notification support.

   - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
     router.

   - mac80211: Target Wake Time support in AP mode.

   - can: j1939: extend UAPI to notify about RX status.

  Driver APIs:

   - Add page frag support in page pool API.

   - Many improvements to the DSA (distributed switch) APIs.

   - ethtool: extend IRQ coalesce uAPI with timer reset modes.

   - devlink: control which auxiliary devices are created.

   - Support CAN PHYs via the generic PHY subsystem.

   - Proper cross-chip support for tag_8021q.

   - Allow TX forwarding for the software bridge data path to be
     offloaded to capable devices.

  Drivers:

   - veth: more flexible channels number configuration.

   - openvswitch: introduce per-cpu upcall dispatch.

   - Add internet mix (IMIX) mode to pktgen.

   - Transparently handle XDP operations in the bonding driver.

   - Add LiteETH network driver.

   - Renesas (ravb):
       - support Gigabit Ethernet IP

   - NXP Ethernet switch (sja1105):
       - fast aging support
       - support for "H" switch topologies
       - traffic termination for ports under VLAN-aware bridge

   - Intel 1G Ethernet
       - support getcrosststamp() with PCIe PTM (Precision Time
         Measurement) for better time sync
       - support Credit-Based Shaper (CBS) offload, enabling HW traffic
         prioritization and bandwidth reservation

   - Broadcom Ethernet (bnxt)
       - support pulse-per-second output
       - support larger Rx rings

   - Mellanox Ethernet (mlx5)
       - support ethtool RSS contexts and MQPRIO channel mode
       - support LAG offload with bridging
       - support devlink rate limit API
       - support packet sampling on tunnels

   - Huawei Ethernet (hns3):
       - basic devlink support
       - add extended IRQ coalescing support
       - report extended link state

   - Netronome Ethernet (nfp):
       - add conntrack offload support

   - Broadcom WiFi (brcmfmac):
       - add WPA3 Personal with FT to supported cipher suites
       - support 43752 SDIO device

   - Intel WiFi (iwlwifi):
       - support scanning hidden 6GHz networks
       - support for a new hardware family (Bz)

   - Xen pv driver:
       - harden netfront against malicious backends

   - Qualcomm mobile
       - ipa: refactor power management and enable automatic suspend
       - mhi: move MBIM to WWAN subsystem interfaces

  Refactor:

   - Ambient BPF run context and cgroup storage cleanup.

   - Compat rework for ndo_ioctl.

  Old code removal:

   - prism54 remove the obsoleted driver, deprecated by the p54 driver.

   - wan: remove sbni/granch driver"

* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
  net: Add depends on OF_NET for LiteX's LiteETH
  ipv6: seg6: remove duplicated include
  net: hns3: remove unnecessary spaces
  net: hns3: add some required spaces
  net: hns3: clean up a type mismatch warning
  net: hns3: refine function hns3_set_default_feature()
  ipv6: remove duplicated 'net/lwtunnel.h' include
  net: w5100: check return value after calling platform_get_resource()
  net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
  net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
  net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
  fou: remove sparse errors
  ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
  octeontx2-af: Set proper errorcode for IPv4 checksum errors
  octeontx2-af: Fix static code analyzer reported issues
  octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
  octeontx2-af: Fix loop in free and unmap counter
  af_unix: fix potential NULL deref in unix_dgram_connect()
  dpaa2-eth: Replace strlcpy with strscpy
  octeontx2-af: Use NDC TX for transmit packet data
  ...

1 files changed, 100 insertions, 0 deletions

diff --git a/tools/lib/bpf/relo_core.h b/tools/lib/bpf/relo_core.h
new file mode 100644
index 000000000000..3b9f8f18346c
--- /dev/null
+++ b/tools/lib/bpf/relo_core.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */
+/* Copyright (c) 2019 Facebook */
+
+#ifndef __RELO_CORE_H
+#define __RELO_CORE_H
+
+/* bpf_core_relo_kind encodes which aspect of captured field/type/enum value
+ * has to be adjusted by relocations.
+ */
+enum bpf_core_relo_kind {
+	BPF_FIELD_BYTE_OFFSET = 0,	/* field byte offset */
+	BPF_FIELD_BYTE_SIZE = 1,	/* field size in bytes */
+	BPF_FIELD_EXISTS = 2,		/* field existence in target kernel */
+	BPF_FIELD_SIGNED = 3,		/* field signedness (0 - unsigned, 1 - signed) */
+	BPF_FIELD_LSHIFT_U64 = 4,	/* bitfield-specific left bitshift */
+	BPF_FIELD_RSHIFT_U64 = 5,	/* bitfield-specific right bitshift */
+	BPF_TYPE_ID_LOCAL = 6,		/* type ID in local BPF object */
+	BPF_TYPE_ID_TARGET = 7,		/* type ID in target kernel */
+	BPF_TYPE_EXISTS = 8,		/* type existence in target kernel */
+	BPF_TYPE_SIZE = 9,		/* type size in bytes */
+	BPF_ENUMVAL_EXISTS = 10,	/* enum value existence in target kernel */
+	BPF_ENUMVAL_VALUE = 11,		/* enum value integer value */
+};
+
+/* The minimum bpf_core_relo checked by the loader
+ *
+ * CO-RE relocation captures the following data:
+ * - insn_off - instruction offset (in bytes) within a BPF program that needs
+ *   its insn->imm field to be relocated with actual field info;
+ * - type_id - BTF type ID of the "root" (containing) entity of a relocatable
+ *   type or field;
+ * - access_str_off - offset into corresponding .BTF string section. String
+ *   interpretation depends on specific relocation kind:
+ *     - for field-based relocations, string encodes an accessed field using
+ *     a sequence of field and array indices, separated by colon (:). It's
+ *     conceptually very close to LLVM's getelementptr ([0]) instruction's
+ *     arguments for identifying offset to a field.
+ *     - for type-based relocations, strings is expected to be just "0";
+ *     - for enum value-based relocations, string contains an index of enum
+ *     value within its enum type;
+ *
+ * Example to provide a better feel.
+ *
+ *   struct sample {
+ *       int a;
+ *       struct {
+ *           int b[10];
+ *       };
+ *   };
+ *
+ *   struct sample *s = ...;
+ *   int x = &s->a;     // encoded as "0:0" (a is field #0)
+ *   int y = &s->b[5];  // encoded as "0:1:0:5" (anon struct is field #1,
+ *                      // b is field #0 inside anon struct, accessing elem #5)
+ *   int z = &s[10]->b; // encoded as "10:1" (ptr is used as an array)
+ *
+ * type_id for all relocs in this example  will capture BTF type id of
+ * `struct sample`.
+ *
+ * Such relocation is emitted when using __builtin_preserve_access_index()
+ * Clang built-in, passing expression that captures field address, e.g.:
+ *
+ * bpf_probe_read(&dst, sizeof(dst),
+ *		  __builtin_preserve_access_index(&src->a.b.c));
+ *
+ * In this case Clang will emit field relocation recording necessary data to
+ * be able to find offset of embedded `a.b.c` field within `src` struct.
+ *
+ *   [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction
+ */
+struct bpf_core_relo {
+	__u32   insn_off;
+	__u32   type_id;
+	__u32   access_str_off;
+	enum bpf_core_relo_kind kind;
+};
+
+struct bpf_core_cand {
+	const struct btf *btf;
+	const struct btf_type *t;
+	const char *name;
+	__u32 id;
+};
+
+/* dynamically sized list of type IDs and its associated struct btf */
+struct bpf_core_cand_list {
+	struct bpf_core_cand *cands;
+	int len;
+};
+
+int bpf_core_apply_relo_insn(const char *prog_name,
+			     struct bpf_insn *insn, int insn_idx,
+			     const struct bpf_core_relo *relo, int relo_idx,
+			     const struct btf *local_btf,
+			     struct bpf_core_cand_list *cands);
+int bpf_core_types_are_compat(const struct btf *local_btf, __u32 local_id,
+			      const struct btf *targ_btf, __u32 targ_id);
+
+size_t bpf_core_essential_name_len(const char *name);
+#endif