Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2019-12-27

The following pull-request contains BPF updates for your *net-next* tree.

We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).

There are three merge conflicts. Conflicts and resolution looks as follows:

1) Merge conflict in net/bpf/test_run.c:

There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):

  <<<<<<< HEAD
          if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
                             sizeof_field(struct __sk_buff, priority),
  =======
          if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
  >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c

There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:

  <<<<<<< HEAD
          if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
                             sizeof_field(struct __sk_buff, tstamp),
  =======
          if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
  >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c

Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").

2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:

(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)

  <<<<<<< HEAD
          if (is_13b_check(off, insn))
                  return -1;
          emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
  =======
          emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
  >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c

Result should look like:

          emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);

3) Merge conflict in arch/riscv/include/asm/pgtable.h:

  <<<<<<< HEAD
  =======
  #define VMALLOC_SIZE     (KERN_VIRT_SIZE >> 1)
  #define VMALLOC_END      (PAGE_OFFSET - 1)
  #define VMALLOC_START    (PAGE_OFFSET - VMALLOC_SIZE)

  #define BPF_JIT_REGION_SIZE     (SZ_128M)
  #define BPF_JIT_REGION_START    (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
  #define BPF_JIT_REGION_END      (VMALLOC_END)

  /*
   * Roughly size the vmemmap space to be large enough to fit enough
   * struct pages to map half the virtual address space. Then
   * position vmemmap directly below the VMALLOC region.
   */
  #define VMEMMAP_SHIFT \
          (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
  #define VMEMMAP_SIZE    BIT(VMEMMAP_SHIFT)
  #define VMEMMAP_END     (VMALLOC_START - 1)
  #define VMEMMAP_START   (VMALLOC_START - VMEMMAP_SIZE)

  #define vmemmap         ((struct page *)VMEMMAP_START)

  >>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c

Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page
calls"). Result:

  [...]
  #define __S101  PAGE_READ_EXEC
  #define __S110  PAGE_SHARED_EXEC
  #define __S111  PAGE_SHARED_EXEC

  #define VMALLOC_SIZE     (KERN_VIRT_SIZE >> 1)
  #define VMALLOC_END      (PAGE_OFFSET - 1)
  #define VMALLOC_START    (PAGE_OFFSET - VMALLOC_SIZE)

  #define BPF_JIT_REGION_SIZE     (SZ_128M)
  #define BPF_JIT_REGION_START    (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
  #define BPF_JIT_REGION_END      (VMALLOC_END)

  /*
   * Roughly size the vmemmap space to be large enough to fit enough
   * struct pages to map half the virtual address space. Then
   * position vmemmap directly below the VMALLOC region.
   */
  #define VMEMMAP_SHIFT \
          (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
  #define VMEMMAP_SIZE    BIT(VMEMMAP_SHIFT)
  #define VMEMMAP_END     (VMALLOC_START - 1)
  #define VMEMMAP_START   (VMALLOC_START - VMEMMAP_SIZE)

  [...]

Let me know if there are any other issues.

Anyway, the main changes are:

1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
   to a provided BPF object file. This provides an alternative, simplified API
   compared to standard libbpf interaction. Also, add libbpf extern variable
   resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.

2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
   generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
   add various BPF riscv JIT improvements, from Björn Töpel.

3) Extend bpftool to allow matching BPF programs and maps by name,
   from Paul Chaignon.

4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
   flag for allowing updates without service interruption, from Andrey Ignatov.

5) Cleanup and simplification of ring access functions for AF_XDP with a
   bonus of 0-5% performance improvement, from Magnus Karlsson.

6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
   audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.

7) Move and extend test_select_reuseport into BPF program tests under
   BPF selftests, from Jakub Sitnicki.

8) Various BPF sample improvements for xdpsock for customizing parameters
   to set up and benchmark AF_XDP, from Jay Jayatheerthan.

9) Improve libbpf to provide a ulimit hint on permission denied errors.
   Also change XDP sample programs to attach in driver mode by default,
   from Toke Høiland-Jørgensen.

10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
    programs, from Nikita V. Shirokov.

11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.

12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
    libbpf conversion, from Jesper Dangaard Brouer.

13) Minor misc improvements from various others.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

12 files changed, 1707 insertions, 233 deletions

diff --git a/tools/bpf/bpftool/Documentation/bpftool-gen.rst b/tools/bpf/bpftool/Documentation/bpftool-gen.rst
new file mode 100644
index 000000000000..86a87da97d0b
--- /dev/null
+++ b/tools/bpf/bpftool/Documentation/bpftool-gen.rst
@@ -0,0 +1,305 @@
+================
+bpftool-gen
+================
+-------------------------------------------------------------------------------
+tool for BPF code-generation
+-------------------------------------------------------------------------------
+
+:Manual section: 8
+
+SYNOPSIS
+========
+
+	**bpftool** [*OPTIONS*] **gen** *COMMAND*
+
+	*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] }
+
+	*COMMAND* := { **skeleton | **help** }
+
+GEN COMMANDS
+=============
+
+|	**bpftool** **gen skeleton** *FILE*
+|	**bpftool** **gen help**
+
+DESCRIPTION
+===========
+	**bpftool gen skeleton** *FILE*
+		  Generate BPF skeleton C header file for a given *FILE*.
+
+		  BPF skeleton is an alternative interface to existing libbpf
+		  APIs for working with BPF objects. Skeleton code is intended
+		  to significantly shorten and simplify code to load and work
+		  with BPF programs from userspace side. Generated code is
+		  tailored to specific input BPF object *FILE*, reflecting its
+		  structure by listing out available maps, program, variables,
+		  etc. Skeleton eliminates the need to lookup mentioned
+		  components by name. Instead, if skeleton instantiation
+		  succeeds, they are populated in skeleton structure as valid
+		  libbpf types (e.g., struct bpf_map pointer) and can be
+		  passed to existing generic libbpf APIs.
+
+		  In addition to simple and reliable access to maps and
+		  programs, skeleton provides a storage for BPF links (struct
+		  bpf_link) for each BPF program within BPF object. When
+		  requested, supported BPF programs will be automatically
+		  attached and resulting BPF links stored for further use by
+		  user in pre-allocated fields in skeleton struct. For BPF
+		  programs that can't be automatically attached by libbpf,
+		  user can attach them manually, but store resulting BPF link
+		  in per-program link field. All such set up links will be
+		  automatically destroyed on BPF skeleton destruction. This
+		  eliminates the need for users to manage links manually and
+		  rely on libbpf support to detach programs and free up
+		  resources.
+
+		  Another facility provided by BPF skeleton is an interface to
+		  global variables of all supported kinds: mutable, read-only,
+		  as well as extern ones. This interface allows to pre-setup
+		  initial values of variables before BPF object is loaded and
+		  verified by kernel. For non-read-only variables, the same
+		  interface can be used to fetch values of global variables on
+		  userspace side, even if they are modified by BPF code.
+
+		  During skeleton generation, contents of source BPF object
+		  *FILE* is embedded within generated code and is thus not
+		  necessary to keep around. This ensures skeleton and BPF
+		  object file are matching 1-to-1 and always stay in sync.
+		  Generated code is dual-licensed under LGPL-2.1 and
+		  BSD-2-Clause licenses.
+
+		  It is a design goal and guarantee that skeleton interfaces
+		  are interoperable with generic libbpf APIs. User should
+		  always be able to use skeleton API to create and load BPF
+		  object, and later use libbpf APIs to keep working with
+		  specific maps, programs, etc.
+
+		  As part of skeleton, few custom functions are generated.
+		  Each of them is prefixed with object name, derived from
+		  object file name. I.e., if BPF object file name is
+		  **example.o**, BPF object name will be **example**. The
+		  following custom functions are provided in such case:
+
+		  - **example__open** and **example__open_opts**.
+		    These functions are used to instantiate skeleton. It
+		    corresponds to libbpf's **bpf_object__open()** API.
+		    **_opts** variants accepts extra **bpf_object_open_opts**
+		    options.
+
+		  - **example__load**.
+		    This function creates maps, loads and verifies BPF
+		    programs, initializes global data maps. It corresponds to
+		    libppf's **bpf_object__load** API.
+
+		  - **example__open_and_load** combines **example__open** and
+		    **example__load** invocations in one commonly used
+		    operation.
+
+		  - **example__attach** and **example__detach**
+		    This pair of functions allow to attach and detach,
+		    correspondingly, already loaded BPF object. Only BPF
+		    programs of types supported by libbpf for auto-attachment
+		    will be auto-attached and their corresponding BPF links
+		    instantiated. For other BPF programs, user can manually
+		    create a BPF link and assign it to corresponding fields in
+		    skeleton struct. **example__detach** will detach both
+		    links created automatically, as well as those populated by
+		    user manually.
+
+		  - **example__destroy**
+		    Detach and unload BPF programs, free up all the resources
+		    used by skeleton and BPF object.
+
+		  If BPF object has global variables, corresponding structs
+		  with memory layout corresponding to global data data section
+		  layout will be created. Currently supported ones are: *.data*,
+		  *.bss*, *.rodata*, and *.kconfig* structs/data sections.
+		  These data sections/structs can be used to set up initial
+		  values of variables, if set before **example__load**.
+		  Afterwards, if target kernel supports memory-mapped BPF
+		  arrays, same structs can be used to fetch and update
+		  (non-read-only) data from userspace, with same simplicity
+		  as for BPF side.
+
+	**bpftool gen help**
+		  Print short help message.
+
+OPTIONS
+=======
+	-h, --help
+		  Print short generic help message (similar to **bpftool help**).
+
+	-V, --version
+		  Print version number (similar to **bpftool version**).
+
+	-j, --json
+		  Generate JSON output. For commands that cannot produce JSON,
+		  this option has no effect.
+
+	-p, --pretty
+		  Generate human-readable JSON output. Implies **-j**.
+
+	-d, --debug
+		  Print all logs available from libbpf, including debug-level
+		  information.
+
+EXAMPLES
+========
+**$ cat example.c**
+::
+
+  #include <stdbool.h>
+  #include <linux/ptrace.h>
+  #include <linux/bpf.h>
+  #include "bpf_helpers.h"
+
+  const volatile int param1 = 42;
+  bool global_flag = true;
+  struct { int x; } data = {};
+
+  struct {
+  	__uint(type, BPF_MAP_TYPE_HASH);
+  	__uint(max_entries, 128);
+  	__type(key, int);
+  	__type(value, long);
+  } my_map SEC(".maps");
+
+  SEC("raw_tp/sys_enter")
+  int handle_sys_enter(struct pt_regs *ctx)
+  {
+  	static long my_static_var;
+  	if (global_flag)
+  		my_static_var++;
+  	else
+  		data.x += param1;
+  	return 0;
+  }
+
+  SEC("raw_tp/sys_exit")
+  int handle_sys_exit(struct pt_regs *ctx)
+  {
+  	int zero = 0;
+  	bpf_map_lookup_elem(&my_map, &zero);
+  	return 0;
+  }
+
+This is example BPF application with two BPF programs and a mix of BPF maps
+and global variables.
+
+**$ bpftool gen skeleton example.o**
+::
+
+  /* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */
+
+  /* THIS FILE IS AUTOGENERATED! */
+  #ifndef __EXAMPLE_SKEL_H__
+  #define __EXAMPLE_SKEL_H__
+
+  #include <stdlib.h>
+  #include <libbpf.h>
+
+  struct example {
+  	struct bpf_object_skeleton *skeleton;
+  	struct bpf_object *obj;
+  	struct {
+  		struct bpf_map *rodata;
+  		struct bpf_map *data;
+  		struct bpf_map *bss;
+  		struct bpf_map *my_map;
+  	} maps;
+  	struct {
+  		struct bpf_program *handle_sys_enter;
+  		struct bpf_program *handle_sys_exit;
+  	} progs;
+  	struct {
+  		struct bpf_link *handle_sys_enter;
+  		struct bpf_link *handle_sys_exit;
+  	} links;
+  	struct example__bss {
+  		struct {
+  			int x;
+  		} data;
+  	} *bss;
+  	struct example__data {
+  		_Bool global_flag;
+  		long int handle_sys_enter_my_static_var;
+  	} *data;
+  	struct example__rodata {
+  		int param1;
+  	} *rodata;
+  };
+
+  static void example__destroy(struct example *obj);
+  static inline struct example *example__open_opts(
+                const struct bpf_object_open_opts *opts);
+  static inline struct example *example__open();
+  static inline int example__load(struct example *obj);
+  static inline struct example *example__open_and_load();
+  static inline int example__attach(struct example *obj);
+  static inline void example__detach(struct example *obj);
+
+  #endif /* __EXAMPLE_SKEL_H__ */
+
+**$ cat example_user.c**
+::
+
+  #include "example.skel.h"
+
+  int main()
+  {
+  	struct example *skel;
+  	int err = 0;
+
+  	skel = example__open();
+  	if (!skel)
+  		goto cleanup;
+
+  	skel->rodata->param1 = 128;
+
+  	err = example__load(skel);
+  	if (err)
+  		goto cleanup;
+
+  	err = example__attach(skel);
+  	if (err)
+  		goto cleanup;
+
+  	/* all libbpf APIs are usable */
+  	printf("my_map name: %s\n", bpf_map__name(skel->maps.my_map));
+  	printf("sys_enter prog FD: %d\n",
+  	       bpf_program__fd(skel->progs.handle_sys_enter));
+
+  	/* detach and re-attach sys_exit program */
+  	bpf_link__destroy(skel->links.handle_sys_exit);
+  	skel->links.handle_sys_exit =
+  		bpf_program__attach(skel->progs.handle_sys_exit);
+
+  	printf("my_static_var: %ld\n",
+  	       skel->bss->handle_sys_enter_my_static_var);
+
+  cleanup:
+  	example__destroy(skel);
+  	return err;
+  }
+
+**# ./example_user**
+::
+
+  my_map name: my_map
+  sys_enter prog FD: 8
+  my_static_var: 7
+
+This is a stripped-out version of skeleton generated for above example code.
+
+SEE ALSO
+========
+	**bpf**\ (2),
+	**bpf-helpers**\ (7),
+	**bpftool**\ (8),
+	**bpftool-map**\ (8),
+	**bpftool-prog**\ (8),
+	**bpftool-cgroup**\ (8),
+	**bpftool-feature**\ (8),
+	**bpftool-net**\ (8),
+	**bpftool-perf**\ (8),
+	**bpftool-btf**\ (8)
diff --git a/tools/bpf/bpftool/Documentation/bpftool-map.rst b/tools/bpf/bpftool/Documentation/bpftool-map.rst
index 1c0f7146aab0..cdeae8ae90ba 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-map.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-map.rst
@@ -39,9 +39,9 @@ MAP COMMANDS
 |	**bpftool** **map freeze**     *MAP*
 |	**bpftool** **map help**
 |
-|	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
+|	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* | **name** *MAP_NAME* }
 |	*DATA* := { [**hex**] *BYTES* }
-|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
+|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* }
 |	*VALUE* := { *DATA* | *MAP* | *PROG* }
 |	*UPDATE_FLAGS* := { **any** | **exist** | **noexist** }
 |	*TYPE* := { **hash** | **array** | **prog_array** | **perf_event_array** | **percpu_hash**
@@ -55,8 +55,9 @@ DESCRIPTION
 ===========
 	**bpftool map { show | list }**   [*MAP*]
 		  Show information about loaded maps.  If *MAP* is specified
-		  show information only about given map, otherwise list all
-		  maps currently loaded on the system.
+		  show information only about given maps, otherwise list all
+		  maps currently loaded on the system.  In case of **name**,
+		  *MAP* may match several maps which will all be shown.
 
 		  Output will start with map ID followed by map type and
 		  zero or more named attributes (depending on kernel version).
@@ -66,7 +67,8 @@ DESCRIPTION
 		  as *FILE*.
 
 	**bpftool map dump**    *MAP*
-		  Dump all entries in a given *MAP*.
+		  Dump all entries in a given *MAP*.  In case of **name**,
+		  *MAP* may match several maps which will all be dumped.
 
 	**bpftool map update**  *MAP* [**key** *DATA*] [**value** *VALUE*] [*UPDATE_FLAGS*]
 		  Update map entry for a given *KEY*.
diff --git a/tools/bpf/bpftool/Documentation/bpftool-prog.rst b/tools/bpf/bpftool/Documentation/bpftool-prog.rst
index 7a374b3c851d..64ddf8a4c518 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-prog.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-prog.rst
@@ -33,7 +33,7 @@ PROG COMMANDS
 |	**bpftool** **prog help**
 |
 |	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
-|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
+|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* }
 |	*TYPE* := {
 |		**socket** | **kprobe** | **kretprobe** | **classifier** | **action** |
 |		**tracepoint** | **raw_tracepoint** | **xdp** | **perf_event** | **cgroup/skb** |
@@ -53,8 +53,10 @@ DESCRIPTION
 ===========
 	**bpftool prog { show | list }** [*PROG*]
 		  Show information about loaded programs.  If *PROG* is
-		  specified show information only about given program, otherwise
-		  list all programs currently loaded on the system.
+		  specified show information only about given programs,
+		  otherwise list all programs currently loaded on the system.
+		  In case of **tag** or **name**, *PROG* may match several
+		  programs which will all be shown.
 
 		  Output will start with program ID followed by program type and
 		  zero or more named attributes (depending on kernel version).
@@ -68,11 +70,15 @@ DESCRIPTION
 		  performed via the **kernel.bpf_stats_enabled** sysctl knob.
 
 	**bpftool prog dump xlated** *PROG* [{ **file** *FILE* | **opcodes** | **visual** | **linum** }]
-		  Dump eBPF instructions of the program from the kernel. By
+		  Dump eBPF instructions of the programs from the kernel. By
 		  default, eBPF will be disassembled and printed to standard
 		  output in human-readable format. In this case, **opcodes**
 		  controls if raw opcodes should be printed as well.
 
+		  In case of **tag** or **name**, *PROG* may match several
+		  programs which will all be dumped.  However, if **file** or
+		  **visual** is specified, *PROG* must match a single program.
+
 		  If **file** is specified, the binary image will instead be
 		  written to *FILE*.
 
@@ -80,15 +86,17 @@ DESCRIPTION
 		  built instead, and eBPF instructions will be presented with
 		  CFG in DOT format, on standard output.
 
-		  If the prog has line_info available, the source line will
+		  If the programs have line_info available, the source line will
 		  be displayed by default.  If **linum** is specified,
 		  the filename, line number and line column will also be
 		  displayed on top of the source line.
 
 	**bpftool prog dump jited**  *PROG* [{ **file** *FILE* | **opcodes** | **linum** }]
 		  Dump jited image (host machine code) of the program.
+
 		  If *FILE* is specified image will be written to a file,
 		  otherwise it will be disassembled and printed to stdout.
+		  *PROG* must match a single program when **file** is specified.
 
 		  **opcodes** controls if raw opcodes will be printed.
 
diff --git a/tools/bpf/bpftool/Documentation/bpftool.rst b/tools/bpf/bpftool/Documentation/bpftool.rst
index 6a9c52ef84a9..34239fda69ed 100644
--- a/tools/bpf/bpftool/Documentation/bpftool.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool.rst
@@ -81,4 +81,5 @@ SEE ALSO
 	**bpftool-feature**\ (8),
 	**bpftool-net**\ (8),
 	**bpftool-perf**\ (8),
-	**bpftool-btf**\ (8)
+	**bpftool-btf**\ (8),
+	**bpftool-gen**\ (8),
diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool
index 70493a6da206..754d8395e451 100644
--- a/tools/bpf/bpftool/bash-completion/bpftool
+++ b/tools/bpf/bpftool/bash-completion/bpftool
@@ -59,6 +59,21 @@ _bpftool_get_map_ids_for_type()
         command sed -n 's/.*"id": \(.*\),$/\1/p' )" -- "$cur" ) )
 }
 
+_bpftool_get_map_names()
+{
+    COMPREPLY+=( $( compgen -W "$( bpftool -jp map  2>&1 | \
+        command sed -n 's/.*"name": \(.*\),$/\1/p' )" -- "$cur" ) )
+}
+
+# Takes map type and adds matching map names to the list of suggestions.
+_bpftool_get_map_names_for_type()
+{
+    local type="$1"
+    COMPREPLY+=( $( compgen -W "$( bpftool -jp map  2>&1 | \
+        command grep -C2 "$type" | \
+        command sed -n 's/.*"name": \(.*\),$/\1/p' )" -- "$cur" ) )
+}
+
 _bpftool_get_prog_ids()
 {
     COMPREPLY+=( $( compgen -W "$( bpftool -jp prog 2>&1 | \
@@ -71,6 +86,12 @@ _bpftool_get_prog_tags()
         command sed -n 's/.*"tag": "\(.*\)",$/\1/p' )" -- "$cur" ) )
 }
 
+_bpftool_get_prog_names()
+{
+    COMPREPLY+=( $( compgen -W "$( bpftool -jp prog 2>&1 | \
+        command sed -n 's/.*"name": "\(.*\)",$/\1/p' )" -- "$cur" ) )
+}
+
 _bpftool_get_btf_ids()
 {
     COMPREPLY+=( $( compgen -W "$( bpftool -jp btf 2>&1 | \
@@ -180,6 +201,52 @@ _bpftool_map_update_get_id()
     esac
 }
 
+_bpftool_map_update_get_name()
+{
+    local command="$1"
+
+    # Is it the map to update, or a map to insert into the map to update?
+    # Search for "value" keyword.
+    local idx value
+    for (( idx=7; idx < ${#words[@]}-1; idx++ )); do
+        if [[ ${words[idx]} == "value" ]]; then
+            value=1
+            break
+        fi
+    done
+    if [[ $value -eq 0 ]]; then
+        case "$command" in
+            push)
+                _bpftool_get_map_names_for_type stack
+                ;;
+            enqueue)
+                _bpftool_get_map_names_for_type queue
+                ;;
+            *)
+                _bpftool_get_map_names
+                ;;
+        esac
+        return 0
+    fi
+
+    # Name to complete is for a value. It can be either prog name or map name. This
+    # depends on the type of the map to update.
+    local type=$(_bpftool_map_guess_map_type)
+    case $type in
+        array_of_maps|hash_of_maps)
+            _bpftool_get_map_names
+            return 0
+            ;;
+        prog_array)
+            _bpftool_get_prog_names
+            return 0
+            ;;
+        *)
+            return 0
+            ;;
+    esac
+}
+
 _bpftool()
 {
     local cur prev words objword
@@ -251,7 +318,8 @@ _bpftool()
     # Completion depends on object and command in use
     case $object in
         prog)
-            # Complete id, only for subcommands that use prog (but no map) ids
+            # Complete id and name, only for subcommands that use prog (but no
+            # map) ids/names.
             case $command in
                 show|list|dump|pin)
                     case $prev in
@@ -259,12 +327,16 @@ _bpftool()
                             _bpftool_get_prog_ids
                             return 0
                             ;;
+                        name)
+                            _bpftool_get_prog_names
+                            return 0
+                            ;;
                     esac
                     ;;
             esac
 
-            local PROG_TYPE='id pinned tag'
-            local MAP_TYPE='id pinned'
+            local PROG_TYPE='id pinned tag name'
+            local MAP_TYPE='id pinned name'
             case $command in
                 show|list)
                     [[ $prev != "$command" ]] && return 0
@@ -315,6 +387,9 @@ _bpftool()
                                 id)
                                     _bpftool_get_prog_ids
                                     ;;
+                                name)
+                                    _bpftool_get_map_names
+                                    ;;
                                 pinned)
                                     _filedir
                                     ;;
@@ -335,6 +410,9 @@ _bpftool()
                                 id)
                                     _bpftool_get_map_ids
                                     ;;
+                                name)
+                                    _bpftool_get_map_names
+                                    ;;
                                 pinned)
                                     _filedir
                                     ;;
@@ -399,6 +477,10 @@ _bpftool()
                             _bpftool_get_map_ids
                             return 0
                             ;;
+                        name)
+                            _bpftool_get_map_names
+                            return 0
+                            ;;
                         pinned|pinmaps)
                             _filedir
                             return 0
@@ -447,7 +529,7 @@ _bpftool()
             esac
             ;;
         map)
-            local MAP_TYPE='id pinned'
+            local MAP_TYPE='id pinned name'
             case $command in
                 show|list|dump|peek|pop|dequeue|freeze)
                     case $prev in
@@ -473,6 +555,24 @@ _bpftool()
                             esac
                             return 0
                             ;;
+                        name)
+                            case "$command" in
+                                peek)
+                                    _bpftool_get_map_names_for_type stack
+                                    _bpftool_get_map_names_for_type queue
+                                    ;;
+                                pop)
+                                    _bpftool_get_map_names_for_type stack
+                                    ;;
+                                dequeue)
+                                    _bpftool_get_map_names_for_type queue
+                                    ;;
+                                *)
+                                    _bpftool_get_map_names
+                                    ;;
+                            esac
+                            return 0
+                            ;;
                         *)
                             return 0
                             ;;
@@ -520,6 +620,10 @@ _bpftool()
                             _bpftool_get_map_ids
                             return 0
                             ;;
+                        name)
+                            _bpftool_get_map_names
+                            return 0
+                            ;;
                         key)
                             COMPREPLY+=( $( compgen -W 'hex' -- "$cur" ) )
                             ;;
@@ -545,6 +649,10 @@ _bpftool()
                             _bpftool_map_update_get_id $command
                             return 0
                             ;;
+                        name)
+                            _bpftool_map_update_get_name $command
+                            return 0
+                            ;;
                         key)
                             COMPREPLY+=( $( compgen -W 'hex' -- "$cur" ) )
                             ;;
@@ -553,13 +661,13 @@ _bpftool()
                             # map, depending on the type of the map to update.
                             case "$(_bpftool_map_guess_map_type)" in
                                 array_of_maps|hash_of_maps)
-                                    local MAP_TYPE='id pinned'
+                                    local MAP_TYPE='id pinned name'
                                     COMPREPLY+=( $( compgen -W "$MAP_TYPE" \
                                         -- "$cur" ) )
                                     return 0
                                     ;;
                                 prog_array)
-                                    local PROG_TYPE='id pinned tag'
+                                    local PROG_TYPE='id pinned tag name'
                                     COMPREPLY+=( $( compgen -W "$PROG_TYPE" \
                                         -- "$cur" ) )
                                     return 0
@@ -621,6 +729,10 @@ _bpftool()
                             _bpftool_get_map_ids_for_type perf_event_array
                             return 0
                             ;;
+                        name)
+                            _bpftool_get_map_names_for_type perf_event_array
+                            return 0
+                            ;;
                         cpu)
                             return 0
                             ;;
@@ -644,8 +756,8 @@ _bpftool()
             esac
             ;;
         btf)
-            local PROG_TYPE='id pinned tag'
-            local MAP_TYPE='id pinned'
+            local PROG_TYPE='id pinned tag name'
+            local MAP_TYPE='id pinned name'
             case $command in
                 dump)
                     case $prev in
@@ -676,6 +788,17 @@ _bpftool()
                             esac
                             return 0
                             ;;
+                        name)
+                            case $pprev in
+                                prog)
+                                    _bpftool_get_prog_names
+                                    ;;
+                                map)
+                                    _bpftool_get_map_names
+                                    ;;
+                            esac
+                            return 0
+                            ;;
                         format)
                             COMPREPLY=( $( compgen -W "c raw" -- "$cur" ) )
                             ;;
@@ -716,6 +839,17 @@ _bpftool()
                     ;;
             esac
             ;;
+        gen)
+            case $command in
+                skeleton)
+                    _filedir
+		    ;;
+                *)
+                    [[ $prev == $object ]] && \
+                        COMPREPLY=( $( compgen -W 'skeleton help' -- "$cur" ) )
+                    ;;
+            esac
+            ;;
         cgroup)
             case $command in
                 show|list|tree)
@@ -735,7 +869,7 @@ _bpftool()
                         connect6 sendmsg4 sendmsg6 recvmsg4 recvmsg6 sysctl \
                         getsockopt setsockopt'
                     local ATTACH_FLAGS='multi override'
-                    local PROG_TYPE='id pinned tag'
+                    local PROG_TYPE='id pinned tag name'
                     case $prev in
                         $command)
                             _filedir
@@ -760,7 +894,7 @@ _bpftool()
                             elif [[ "$command" == "attach" ]]; then
                                 # We have an attach type on the command line,
                                 # but it is not the previous word, or
-                                # "id|pinned|tag" (we already checked for
+                                # "id|pinned|tag|name" (we already checked for
                                 # that). This should only leave the case when
                                 # we need attach flags for "attach" commamnd.
                                 _bpftool_one_of_list "$ATTACH_FLAGS"
@@ -786,7 +920,7 @@ _bpftool()
             esac
             ;;
         net)
-            local PROG_TYPE='id pinned tag'
+            local PROG_TYPE='id pinned tag name'
             local ATTACH_TYPES='xdp xdpgeneric xdpdrv xdpoffload'
             case $command in
                 show|list)
diff --git a/tools/bpf/bpftool/cgroup.c b/tools/bpf/bpftool/cgroup.c
index 1ef45e55039e..2f017caa678d 100644
--- a/tools/bpf/bpftool/cgroup.c
+++ b/tools/bpf/bpftool/cgroup.c
@@ -117,6 +117,25 @@ static int count_attached_bpf_progs(int cgroup_fd, enum bpf_attach_type type)
 	return prog_cnt;
 }
 
+static int cgroup_has_attached_progs(int cgroup_fd)
+{
+	enum bpf_attach_type type;
+	bool no_prog = true;
+
+	for (type = 0; type < __MAX_BPF_ATTACH_TYPE; type++) {
+		int count = count_attached_bpf_progs(cgroup_fd, type);
+
+		if (count < 0 && errno != EINVAL)
+			return -1;
+
+		if (count > 0) {
+			no_prog = false;
+			break;
+		}
+	}
+
+	return no_prog ? 0 : 1;
+}
 static int show_attached_bpf_progs(int cgroup_fd, enum bpf_attach_type type,
 				   int level)
 {
@@ -161,6 +180,7 @@ static int show_attached_bpf_progs(int cgroup_fd, enum bpf_attach_type type,
 static int do_show(int argc, char **argv)
 {
 	enum bpf_attach_type type;
+	int has_attached_progs;
 	const char *path;
 	int cgroup_fd;
 	int ret = -1;
@@ -192,6 +212,16 @@ static int do_show(int argc, char **argv)
 		goto exit;
 	}
 
+	has_attached_progs = cgroup_has_attached_progs(cgroup_fd);
+	if (has_attached_progs < 0) {
+		p_err("can't query bpf programs attached to %s: %s",
+		      path, strerror(errno));
+		goto exit_cgroup;
+	} else if (!has_attached_progs) {
+		ret = 0;
+		goto exit_cgroup;
+	}
+
 	if (json_output)
 		jsonw_start_array(json_wtr);
 	else
@@ -212,6 +242,7 @@ static int do_show(int argc, char **argv)
 	if (json_output)
 		jsonw_end_array(json_wtr);
 
+exit_cgroup:
 	close(cgroup_fd);
 exit:
 	return ret;
@@ -228,7 +259,7 @@ static int do_show_tree_fn(const char *fpath, const struct stat *sb,
 			   int typeflag, struct FTW *ftw)
 {
 	enum bpf_attach_type type;
-	bool skip = true;
+	int has_attached_progs;
 	int cgroup_fd;
 
 	if (typeflag != FTW_D)
@@ -240,22 +271,13 @@ static int do_show_tree_fn(const char *fpath, const struct stat *sb,
 		return SHOW_TREE_FN_ERR;
 	}
 
-	for (type = 0; type < __MAX_BPF_ATTACH_TYPE; type++) {
-		int count = count_attached_bpf_progs(cgroup_fd, type);
-
-		if (count < 0 && errno != EINVAL) {
-			p_err("can't query bpf programs attached to %s: %s",
-			      fpath, strerror(errno));
-			close(cgroup_fd);
-			return SHOW_TREE_FN_ERR;
-		}
-		if (count > 0) {
-			skip = false;
-			break;
-		}
-	}
-
-	if (skip) {
+	has_attached_progs = cgroup_has_attached_progs(cgroup_fd);
+	if (has_attached_progs < 0) {
+		p_err("can't query bpf programs attached to %s: %s",
+		      fpath, strerror(errno));
+		close(cgroup_fd);
+		return SHOW_TREE_FN_ERR;
+	} else if (!has_attached_progs) {
 		close(cgroup_fd);
 		return 0;
 	}
diff --git a/tools/bpf/bpftool/gen.c b/tools/bpf/bpftool/gen.c
new file mode 100644
index 000000000000..7ce09a9a6999
--- /dev/null
+++ b/tools/bpf/bpftool/gen.c
@@ -0,0 +1,609 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/* Copyright (C) 2019 Facebook */
+
+#ifndef _GNU_SOURCE
+#define _GNU_SOURCE
+#endif
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <linux/err.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <bpf.h>
+#include <libbpf.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <unistd.h>
+
+#include "btf.h"
+#include "libbpf_internal.h"
+#include "json_writer.h"
+#include "main.h"
+
+
+#define MAX_OBJ_NAME_LEN 64
+
+static void sanitize_identifier(char *name)
+{
+	int i;
+
+	for (i = 0; name[i]; i++)
+		if (!isalnum(name[i]) && name[i] != '_')
+			name[i] = '_';
+}
+
+static bool str_has_suffix(const char *str, const char *suffix)
+{
+	size_t i, n1 = strlen(str), n2 = strlen(suffix);
+
+	if (n1 < n2)
+		return false;
+
+	for (i = 0; i < n2; i++) {
+		if (str[n1 - i - 1] != suffix[n2 - i - 1])
+			return false;
+	}
+
+	return true;
+}
+
+static void get_obj_name(char *name, const char *file)
+{
+	/* Using basename() GNU version which doesn't modify arg. */
+	strncpy(name, basename(file), MAX_OBJ_NAME_LEN - 1);
+	name[MAX_OBJ_NAME_LEN - 1] = '\0';
+	if (str_has_suffix(name, ".o"))
+		name[strlen(name) - 2] = '\0';
+	sanitize_identifier(name);
+}
+
+static void get_header_guard(char *guard, const char *obj_name)
+{
+	int i;
+
+	sprintf(guard, "__%s_SKEL_H__", obj_name);
+	for (i = 0; guard[i]; i++)
+		guard[i] = toupper(guard[i]);
+}
+
+static const char *get_map_ident(const struct bpf_map *map)
+{
+	const char *name = bpf_map__name(map);
+
+	if (!bpf_map__is_internal(map))
+		return name;
+
+	if (str_has_suffix(name, ".data"))
+		return "data";
+	else if (str_has_suffix(name, ".rodata"))
+		return "rodata";
+	else if (str_has_suffix(name, ".bss"))
+		return "bss";
+	else if (str_has_suffix(name, ".kconfig"))
+		return "kconfig";
+	else
+		return NULL;
+}
+
+static void codegen_btf_dump_printf(void *ct, const char *fmt, va_list args)
+{
+	vprintf(fmt, args);
+}
+
+static int codegen_datasec_def(struct bpf_object *obj,
+			       struct btf *btf,
+			       struct btf_dump *d,
+			       const struct btf_type *sec,
+			       const char *obj_name)
+{
+	const char *sec_name = btf__name_by_offset(btf, sec->name_off);
+	const struct btf_var_secinfo *sec_var = btf_var_secinfos(sec);
+	int i, err, off = 0, pad_cnt = 0, vlen = btf_vlen(sec);
+	const char *sec_ident;
+	char var_ident[256];
+
+	if (strcmp(sec_name, ".data") == 0)
+		sec_ident = "data";
+	else if (strcmp(sec_name, ".bss") == 0)
+		sec_ident = "bss";
+	else if (strcmp(sec_name, ".rodata") == 0)
+		sec_ident = "rodata";
+	else if (strcmp(sec_name, ".kconfig") == 0)
+		sec_ident = "kconfig";
+	else
+		return 0;
+
+	printf("	struct %s__%s {\n", obj_name, sec_ident);
+	for (i = 0; i < vlen; i++, sec_var++) {
+		const struct btf_type *var = btf__type_by_id(btf, sec_var->type);
+		const char *var_name = btf__name_by_offset(btf, var->name_off);
+		DECLARE_LIBBPF_OPTS(btf_dump_emit_type_decl_opts, opts,
+			.field_name = var_ident,
+			.indent_level = 2,
+		);
+		int need_off = sec_var->offset, align_off, align;
+		__u32 var_type_id = var->type;
+		const struct btf_type *t;
+
+		t = btf__type_by_id(btf, var_type_id);
+		while (btf_is_mod(t)) {
+			var_type_id = t->type;
+			t = btf__type_by_id(btf, var_type_id);
+		}
+
+		if (off > need_off) {
+			p_err("Something is wrong for %s's variable #%d: need offset %d, already at %d.\n",
+			      sec_name, i, need_off, off);
+			return -EINVAL;
+		}
+
+		align = btf__align_of(btf, var->type);
+		if (align <= 0) {
+			p_err("Failed to determine alignment of variable '%s': %d",
+			      var_name, align);
+			return -EINVAL;
+		}
+
+		align_off = (off + align - 1) / align * align;
+		if (align_off != need_off) {
+			printf("\t\tchar __pad%d[%d];\n",
+			       pad_cnt, need_off - off);
+			pad_cnt++;
+		}
+
+		/* sanitize variable name, e.g., for static vars inside
+		 * a function, it's name is '<function name>.<variable name>',
+		 * which we'll turn into a '<function name>_<variable name>'
+		 */
+		var_ident[0] = '\0';
+		strncat(var_ident, var_name, sizeof(var_ident) - 1);
+		sanitize_identifier(var_ident);
+
+		printf("\t\t");
+		err = btf_dump__emit_type_decl(d, var_type_id, &opts);
+		if (err)
+			return err;
+		printf(";\n");
+
+		off = sec_var->offset + sec_var->size;
+	}
+	printf("	} *%s;\n", sec_ident);
+	return 0;
+}
+
+static int codegen_datasecs(struct bpf_object *obj, const char *obj_name)
+{
+	struct btf *btf = bpf_object__btf(obj);
+	int n = btf__get_nr_types(btf);
+	struct btf_dump *d;
+	int i, err = 0;
+
+	d = btf_dump__new(btf, NULL, NULL, codegen_btf_dump_printf);
+	if (IS_ERR(d))
+		return PTR_ERR(d);
+
+	for (i = 1; i <= n; i++) {
+		const struct btf_type *t = btf__type_by_id(btf, i);
+
+		if (!btf_is_datasec(t))
+			continue;
+
+		err = codegen_datasec_def(obj, btf, d, t, obj_name);
+		if (err)
+			goto out;
+	}
+out:
+	btf_dump__free(d);
+	return err;
+}
+
+static int codegen(const char *template, ...)
+{
+	const char *src, *end;
+	int skip_tabs = 0, n;
+	char *s, *dst;
+	va_list args;
+	char c;
+
+	n = strlen(template);
+	s = malloc(n + 1);
+	if (!s)
+		return -ENOMEM;
+	src = template;
+	dst = s;
+
+	/* find out "baseline" indentation to skip */
+	while ((c = *src++)) {
+		if (c == '\t') {
+			skip_tabs++;
+		} else if (c == '\n') {
+			break;
+		} else {
+			p_err("unrecognized character at pos %td in template '%s'",
+			      src - template - 1, template);
+			return -EINVAL;
+		}
+	}
+
+	while (*src) {
+		/* skip baseline indentation tabs */
+		for (n = skip_tabs; n > 0; n--, src++) {
+			if (*src != '\t') {
+				p_err("not enough tabs at pos %td in template '%s'",
+				      src - template - 1, template);
+				return -EINVAL;
+			}
+		}
+		/* trim trailing whitespace */
+		end = strchrnul(src, '\n');
+		for (n = end - src; n > 0 && isspace(src[n - 1]); n--)
+			;
+		memcpy(dst, src, n);
+		dst += n;
+		if (*end)
+			*dst++ = '\n';
+		src = *end ? end + 1 : end;
+	}
+	*dst++ = '\0';
+
+	/* print out using adjusted template */
+	va_start(args, template);
+	n = vprintf(s, args);
+	va_end(args);
+
+	free(s);
+	return n;
+}
+
+static int do_skeleton(int argc, char **argv)
+{
+	char header_guard[MAX_OBJ_NAME_LEN + sizeof("__SKEL_H__")];
+	size_t i, map_cnt = 0, prog_cnt = 0, file_sz, mmap_sz;
+	DECLARE_LIBBPF_OPTS(bpf_object_open_opts, opts);
+	char obj_name[MAX_OBJ_NAME_LEN], *obj_data;
+	struct bpf_object *obj = NULL;
+	const char *file, *ident;
+	struct bpf_program *prog;
+	int fd, len, err = -1;
+	struct bpf_map *map;
+	struct btf *btf;
+	struct stat st;
+
+	if (!REQ_ARGS(1)) {
+		usage();
+		return -1;
+	}
+	file = GET_ARG();
+
+	if (argc) {
+		p_err("extra unknown arguments");
+		return -1;
+	}
+
+	if (stat(file, &st)) {
+		p_err("failed to stat() %s: %s", file, strerror(errno));
+		return -1;
+	}
+	file_sz = st.st_size;
+	mmap_sz = roundup(file_sz, sysconf(_SC_PAGE_SIZE));
+	fd = open(file, O_RDONLY);
+	if (fd < 0) {
+		p_err("failed to open() %s: %s", file, strerror(errno));
+		return -1;
+	}
+	obj_data = mmap(NULL, mmap_sz, PROT_READ, MAP_PRIVATE, fd, 0);
+	if (obj_data == MAP_FAILED) {
+		obj_data = NULL;
+		p_err("failed to mmap() %s: %s", file, strerror(errno));
+		goto out;
+	}
+	get_obj_name(obj_name, file);
+	opts.object_name = obj_name;
+	obj = bpf_object__open_mem(obj_data, file_sz, &opts);
+	if (IS_ERR(obj)) {
+		obj = NULL;
+		p_err("failed to open BPF object file: %ld", PTR_ERR(obj));
+		goto out;
+	}
+
+	bpf_object__for_each_map(map, obj) {
+		ident = get_map_ident(map);
+		if (!ident) {
+			p_err("ignoring unrecognized internal map '%s'...",
+			      bpf_map__name(map));
+			continue;
+		}
+		map_cnt++;
+	}
+	bpf_object__for_each_program(prog, obj) {
+		prog_cnt++;
+	}
+
+	get_header_guard(header_guard, obj_name);
+	codegen("\
+		\n\
+		/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */   \n\
+									    \n\
+		/* THIS FILE IS AUTOGENERATED! */			    \n\
+		#ifndef %2$s						    \n\
+		#define %2$s						    \n\
+									    \n\
+		#include <stdlib.h>					    \n\
+		#include <libbpf.h>					    \n\
+									    \n\
+		struct %1$s {						    \n\
+			struct bpf_object_skeleton *skeleton;		    \n\
+			struct bpf_object *obj;				    \n\
+		",
+		obj_name, header_guard
+	);
+
+	if (map_cnt) {
+		printf("\tstruct {\n");
+		bpf_object__for_each_map(map, obj) {
+			ident = get_map_ident(map);
+			if (!ident)
+				continue;
+			printf("\t\tstruct bpf_map *%s;\n", ident);
+		}
+		printf("\t} maps;\n");
+	}
+
+	if (prog_cnt) {
+		printf("\tstruct {\n");
+		bpf_object__for_each_program(prog, obj) {
+			printf("\t\tstruct bpf_program *%s;\n",
+			       bpf_program__name(prog));
+		}
+		printf("\t} progs;\n");
+		printf("\tstruct {\n");
+		bpf_object__for_each_program(prog, obj) {
+			printf("\t\tstruct bpf_link *%s;\n",
+			       bpf_program__name(prog));
+		}
+		printf("\t} links;\n");
+	}
+
+	btf = bpf_object__btf(obj);
+	if (btf) {
+		err = codegen_datasecs(obj, obj_name);
+		if (err)
+			goto out;
+	}
+
+	codegen("\
+		\n\
+		};							    \n\
+									    \n\
+		static void						    \n\
+		%1$s__destroy(struct %1$s *obj)				    \n\
+		{							    \n\
+			if (!obj)					    \n\
+				return;					    \n\
+			if (obj->skeleton)				    \n\
+				bpf_object__destroy_skeleton(obj->skeleton);\n\
+			free(obj);					    \n\
+		}							    \n\
+									    \n\
+		static inline int					    \n\
+		%1$s__create_skeleton(struct %1$s *obj);		    \n\
+									    \n\
+		static inline struct %1$s *				    \n\
+		%1$s__open_opts(const struct bpf_object_open_opts *opts)    \n\
+		{							    \n\
+			struct %1$s *obj;				    \n\
+									    \n\
+			obj = (typeof(obj))calloc(1, sizeof(*obj));	    \n\
+			if (!obj)					    \n\
+				return NULL;				    \n\
+			if (%1$s__create_skeleton(obj))			    \n\
+				goto err;				    \n\
+			if (bpf_object__open_skeleton(obj->skeleton, opts)) \n\
+				goto err;				    \n\
+									    \n\
+			return obj;					    \n\
+		err:							    \n\
+			%1$s__destroy(obj);				    \n\
+			return NULL;					    \n\
+		}							    \n\
+									    \n\
+		static inline struct %1$s *				    \n\
+		%1$s__open(void)					    \n\
+		{							    \n\
+			return %1$s__open_opts(NULL);			    \n\
+		}							    \n\
+									    \n\
+		static inline int					    \n\
+		%1$s__load(struct %1$s *obj)				    \n\
+		{							    \n\
+			return bpf_object__load_skeleton(obj->skeleton);    \n\
+		}							    \n\
+									    \n\
+		static inline struct %1$s *				    \n\
+		%1$s__open_and_load(void)				    \n\
+		{							    \n\
+			struct %1$s *obj;				    \n\
+									    \n\
+			obj = %1$s__open();				    \n\
+			if (!obj)					    \n\
+				return NULL;				    \n\
+			if (%1$s__load(obj)) {				    \n\
+				%1$s__destroy(obj);			    \n\
+				return NULL;				    \n\
+			}						    \n\
+			return obj;					    \n\
+		}							    \n\
+									    \n\
+		static inline int					    \n\
+		%1$s__attach(struct %1$s *obj)				    \n\
+		{							    \n\
+			return bpf_object__attach_skeleton(obj->skeleton);  \n\
+		}							    \n\
+									    \n\
+		static inline void					    \n\
+		%1$s__detach(struct %1$s *obj)				    \n\
+		{							    \n\
+			return bpf_object__detach_skeleton(obj->skeleton);  \n\
+		}							    \n\
+		",
+		obj_name
+	);
+
+	codegen("\
+		\n\
+									    \n\
+		static inline int					    \n\
+		%1$s__create_skeleton(struct %1$s *obj)			    \n\
+		{							    \n\
+			struct bpf_object_skeleton *s;			    \n\
+									    \n\
+			s = (typeof(s))calloc(1, sizeof(*s));		    \n\
+			if (!s)						    \n\
+				return -1;				    \n\
+			obj->skeleton = s;				    \n\
+									    \n\
+			s->sz = sizeof(*s);				    \n\
+			s->name = \"%1$s\";				    \n\
+			s->obj = &obj->obj;				    \n\
+		",
+		obj_name
+	);
+	if (map_cnt) {
+		codegen("\
+			\n\
+									    \n\
+				/* maps */				    \n\
+				s->map_cnt = %zu;			    \n\
+				s->map_skel_sz = sizeof(*s->maps);	    \n\
+				s->maps = (typeof(s->maps))calloc(s->map_cnt, s->map_skel_sz);\n\
+				if (!s->maps)				    \n\
+					goto err;			    \n\
+			",
+			map_cnt
+		);
+		i = 0;
+		bpf_object__for_each_map(map, obj) {
+			ident = get_map_ident(map);
+
+			if (!ident)
+				continue;
+
+			codegen("\
+				\n\
+									    \n\
+					s->maps[%zu].name = \"%s\";	    \n\
+					s->maps[%zu].map = &obj->maps.%s;   \n\
+				",
+				i, bpf_map__name(map), i, ident);
+			/* memory-mapped internal maps */
+			if (bpf_map__is_internal(map) &&
+			    (bpf_map__def(map)->map_flags & BPF_F_MMAPABLE)) {
+				printf("\ts->maps[%zu].mmaped = (void **)&obj->%s;\n",
+				       i, ident);
+			}
+			i++;
+		}
+	}
+	if (prog_cnt) {
+		codegen("\
+			\n\
+									    \n\
+				/* programs */				    \n\
+				s->prog_cnt = %zu;			    \n\
+				s->prog_skel_sz = sizeof(*s->progs);	    \n\
+				s->progs = (typeof(s->progs))calloc(s->prog_cnt, s->prog_skel_sz);\n\
+				if (!s->progs)				    \n\
+					goto err;			    \n\
+			",
+			prog_cnt
+		);
+		i = 0;
+		bpf_object__for_each_program(prog, obj) {
+			codegen("\
+				\n\
+									    \n\
+					s->progs[%1$zu].name = \"%2$s\";    \n\
+					s->progs[%1$zu].prog = &obj->progs.%2$s;\n\
+					s->progs[%1$zu].link = &obj->links.%2$s;\n\
+				",
+				i, bpf_program__name(prog));
+			i++;
+		}
+	}
+	codegen("\
+		\n\
+									    \n\
+			s->data_sz = %d;				    \n\
+			s->data = (void *)\"\\				    \n\
+		",
+		file_sz);
+
+	/* embed contents of BPF object file */
+	for (i = 0, len = 0; i < file_sz; i++) {
+		int w = obj_data[i] ? 4 : 2;
+
+		len += w;
+		if (len > 78) {
+			printf("\\\n");
+			len = w;
+		}
+		if (!obj_data[i])
+			printf("\\0");
+		else
+			printf("\\x%02x", (unsigned char)obj_data[i]);
+	}
+
+	codegen("\
+		\n\
+		\";							    \n\
+									    \n\
+			return 0;					    \n\
+		err:							    \n\
+			bpf_object__destroy_skeleton(s);		    \n\
+			return -1;					    \n\
+		}							    \n\
+									    \n\
+		#endif /* %s */						    \n\
+		",
+		header_guard);
+	err = 0;
+out:
+	bpf_object__close(obj);
+	if (obj_data)
+		munmap(obj_data, mmap_sz);
+	close(fd);
+	return err;
+}
+
+static int do_help(int argc, char **argv)
+{
+	if (json_output) {
+		jsonw_null(json_wtr);
+		return 0;
+	}
+
+	fprintf(stderr,
+		"Usage: %1$s gen skeleton FILE\n"
+		"       %1$s gen help\n"
+		"\n"
+		"       " HELP_SPEC_OPTIONS "\n"
+		"",
+		bin_name);
+
+	return 0;
+}
+
+static const struct cmd cmds[] = {
+	{ "skeleton",	do_skeleton },
+	{ "help",	do_help },
+	{ 0 }
+};
+
+int do_gen(int argc, char **argv)
+{
+	return cmd_select(cmds, argc, argv, do_help);
+}
diff --git a/tools/bpf/bpftool/main.c b/tools/bpf/bpftool/main.c
index 4764581ff9ea..1fe91c558508 100644
--- a/tools/bpf/bpftool/main.c
+++ b/tools/bpf/bpftool/main.c
@@ -58,7 +58,7 @@ static int do_help(int argc, char **argv)
 		"       %s batch file FILE\n"
 		"       %s version\n"
 		"\n"
-		"       OBJECT := { prog | map | cgroup | perf | net | feature | btf }\n"
+		"       OBJECT := { prog | map | cgroup | perf | net | feature | btf | gen }\n"
 		"       " HELP_SPEC_OPTIONS "\n"
 		"",
 		bin_name, bin_name, bin_name);
@@ -227,6 +227,7 @@ static const struct cmd cmds[] = {
 	{ "net",	do_net },
 	{ "feature",	do_feature },
 	{ "btf",	do_btf },
+	{ "gen",	do_gen },
 	{ "version",	do_version },
 	{ 0 }
 };
diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h
index 2899095f8254..4e75b58d3989 100644
--- a/tools/bpf/bpftool/main.h
+++ b/tools/bpf/bpftool/main.h
@@ -42,12 +42,12 @@
 #define BPF_TAG_FMT	"%02hhx%02hhx%02hhx%02hhx%02hhx%02hhx%02hhx%02hhx"
 
 #define HELP_SPEC_PROGRAM						\
-	"PROG := { id PROG_ID | pinned FILE | tag PROG_TAG }"
+	"PROG := { id PROG_ID | pinned FILE | tag PROG_TAG | name PROG_NAME }"
 #define HELP_SPEC_OPTIONS						\
 	"OPTIONS := { {-j|--json} [{-p|--pretty}] | {-f|--bpffs} |\n"	\
 	"\t            {-m|--mapcompat} | {-n|--nomount} }"
 #define HELP_SPEC_MAP							\
-	"MAP := { id MAP_ID | pinned FILE }"
+	"MAP := { id MAP_ID | pinned FILE | name MAP_NAME }"
 
 static const char * const prog_type_name[] = {
 	[BPF_PROG_TYPE_UNSPEC]			= "unspec",
@@ -155,6 +155,7 @@ int do_net(int argc, char **arg);
 int do_tracelog(int argc, char **arg);
 int do_feature(int argc, char **argv);
 int do_btf(int argc, char **argv);
+int do_gen(int argc, char **argv);
 
 int parse_u32_arg(int *argc, char ***argv, __u32 *val, const char *what);
 int prog_parse_fd(int *argc, char ***argv);
diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c
index de61d73b9030..c01f76fa6876 100644
--- a/tools/bpf/bpftool/map.c
+++ b/tools/bpf/bpftool/map.c
@@ -91,10 +91,66 @@ static void *alloc_value(struct bpf_map_info *info)
 		return malloc(info->value_size);
 }
 
-int map_parse_fd(int *argc, char ***argv)
+static int map_fd_by_name(char *name, int **fds)
 {
-	int fd;
+	unsigned int id = 0;
+	int fd, nb_fds = 0;
+	void *tmp;
+	int err;
+
+	while (true) {
+		struct bpf_map_info info = {};
+		__u32 len = sizeof(info);
+
+		err = bpf_map_get_next_id(id, &id);
+		if (err) {
+			if (errno != ENOENT) {
+				p_err("%s", strerror(errno));
+				goto err_close_fds;
+			}
+			return nb_fds;
+		}
+
+		fd = bpf_map_get_fd_by_id(id);
+		if (fd < 0) {
+			p_err("can't get map by id (%u): %s",
+			      id, strerror(errno));
+			goto err_close_fds;
+		}
+
+		err = bpf_obj_get_info_by_fd(fd, &info, &len);
+		if (err) {
+			p_err("can't get map info (%u): %s",
+			      id, strerror(errno));
+			goto err_close_fd;
+		}
+
+		if (strncmp(name, info.name, BPF_OBJ_NAME_LEN)) {
+			close(fd);
+			continue;
+		}
+
+		if (nb_fds > 0) {
+			tmp = realloc(*fds, (nb_fds + 1) * sizeof(int));
+			if (!tmp) {
+				p_err("failed to realloc");
+				goto err_close_fd;
+			}
+			*fds = tmp;
+		}
+		(*fds)[nb_fds++] = fd;
+	}
+
+err_close_fd:
+	close(fd);
+err_close_fds:
+	while (--nb_fds >= 0)
+		close((*fds)[nb_fds]);
+	return -1;
+}
 
+static int map_parse_fds(int *argc, char ***argv, int **fds)
+{
 	if (is_prefix(**argv, "id")) {
 		unsigned int id;
 		char *endptr;
@@ -108,10 +164,25 @@ int map_parse_fd(int *argc, char ***argv)
 		}
 		NEXT_ARGP();
 
-		fd = bpf_map_get_fd_by_id(id);
-		if (fd < 0)
+		(*fds)[0] = bpf_map_get_fd_by_id(id);
+		if ((*fds)[0] < 0) {
 			p_err("get map by id (%u): %s", id, strerror(errno));
-		return fd;
+			return -1;
+		}
+		return 1;
+	} else if (is_prefix(**argv, "name")) {
+		char *name;
+
+		NEXT_ARGP();
+
+		name = **argv;
+		if (strlen(name) > BPF_OBJ_NAME_LEN - 1) {
+			p_err("can't parse name");
+			return -1;
+		}
+		NEXT_ARGP();
+
+		return map_fd_by_name(name, fds);
 	} else if (is_prefix(**argv, "pinned")) {
 		char *path;
 
@@ -120,13 +191,43 @@ int map_parse_fd(int *argc, char ***argv)
 		path = **argv;
 		NEXT_ARGP();
 
-		return open_obj_pinned_any(path, BPF_OBJ_MAP);
+		(*fds)[0] = open_obj_pinned_any(path, BPF_OBJ_MAP);
+		if ((*fds)[0] < 0)
+			return -1;
+		return 1;
 	}
 
-	p_err("expected 'id' or 'pinned', got: '%s'?", **argv);
+	p_err("expected 'id', 'name' or 'pinned', got: '%s'?", **argv);
 	return -1;
 }
 
+int map_parse_fd(int *argc, char ***argv)
+{
+	int *fds = NULL;
+	int nb_fds, fd;
+
+	fds = malloc(sizeof(int));
+	if (!fds) {
+		p_err("mem alloc failed");
+		return -1;
+	}
+	nb_fds = map_parse_fds(argc, argv, &fds);
+	if (nb_fds != 1) {
+		if (nb_fds > 1) {
+			p_err("several maps match this handle");
+			while (nb_fds--)
+				close(fds[nb_fds]);
+		}
+		fd = -1;
+		goto exit_free;
+	}
+
+	fd = fds[0];
+exit_free:
+	free(fds);
+	return fd;
+}
+
 int map_parse_fd_and_info(int *argc, char ***argv, void *info, __u32 *info_len)
 {
 	int err;
@@ -479,6 +580,21 @@ static int parse_elem(char **argv, struct bpf_map_info *info,
 	return -1;
 }
 
+static void show_map_header_json(struct bpf_map_info *info, json_writer_t *wtr)
+{
+	jsonw_uint_field(wtr, "id", info->id);
+	if (info->type < ARRAY_SIZE(map_type_name))
+		jsonw_string_field(wtr, "type", map_type_name[info->type]);
+	else
+		jsonw_uint_field(wtr, "type", info->type);
+
+	if (*info->name)
+		jsonw_string_field(wtr, "name", info->name);
+
+	jsonw_name(wtr, "flags");
+	jsonw_printf(wtr, "%d", info->map_flags);
+}
+
 static int show_map_close_json(int fd, struct bpf_map_info *info)
 {
 	char *memlock, *frozen_str;
@@ -489,18 +605,7 @@ static int show_map_close_json(int fd, struct bpf_map_info *info)
 
 	jsonw_start_object(json_wtr);
 
-	jsonw_uint_field(json_wtr, "id", info->id);
-	if (info->type < ARRAY_SIZE(map_type_name))
-		jsonw_string_field(json_wtr, "type",
-				   map_type_name[info->type]);
-	else
-		jsonw_uint_field(json_wtr, "type", info->type);
-
-	if (*info->name)
-		jsonw_string_field(json_wtr, "name", info->name);
-
-	jsonw_name(json_wtr, "flags");
-	jsonw_printf(json_wtr, "%d", info->map_flags);
+	show_map_header_json(info, json_wtr);
 
 	print_dev_json(info->ifindex, info->netns_dev, info->netns_ino);
 
@@ -561,14 +666,8 @@ static int show_map_close_json(int fd, struct bpf_map_info *info)
 	return 0;
 }
 
-static int show_map_close_plain(int fd, struct bpf_map_info *info)
+static void show_map_header_plain(struct bpf_map_info *info)
 {
-	char *memlock, *frozen_str;
-	int frozen = 0;
-
-	memlock = get_fdinfo(fd, "memlock");
-	frozen_str = get_fdinfo(fd, "frozen");
-
 	printf("%u: ", info->id);
 	if (info->type < ARRAY_SIZE(map_type_name))
 		printf("%s  ", map_type_name[info->type]);
@@ -581,6 +680,17 @@ static int show_map_close_plain(int fd, struct bpf_map_info *info)
 	printf("flags 0x%x", info->map_flags);
 	print_dev_plain(info->ifindex, info->netns_dev, info->netns_ino);
 	printf("\n");
+}
+
+static int show_map_close_plain(int fd, struct bpf_map_info *info)
+{
+	char *memlock, *frozen_str;
+	int frozen = 0;
+
+	memlock = get_fdinfo(fd, "memlock");
+	frozen_str = get_fdinfo(fd, "frozen");
+
+	show_map_header_plain(info);
 	printf("\tkey %uB  value %uB  max_entries %u",
 	       info->key_size, info->value_size, info->max_entries);
 
@@ -642,6 +752,50 @@ static int show_map_close_plain(int fd, struct bpf_map_info *info)
 	return 0;
 }
 
+static int do_show_subset(int argc, char **argv)
+{
+	struct bpf_map_info info = {};
+	__u32 len = sizeof(info);
+	int *fds = NULL;
+	int nb_fds, i;
+	int err = -1;
+
+	fds = malloc(sizeof(int));
+	if (!fds) {
+		p_err("mem alloc failed");
+		return -1;
+	}
+	nb_fds = map_parse_fds(&argc, &argv, &fds);
+	if (nb_fds < 1)
+		goto exit_free;
+
+	if (json_output && nb_fds > 1)
+		jsonw_start_array(json_wtr);	/* root array */
+	for (i = 0; i < nb_fds; i++) {
+		err = bpf_obj_get_info_by_fd(fds[i], &info, &len);
+		if (err) {
+			p_err("can't get map info: %s",
+			      strerror(errno));
+			for (; i < nb_fds; i++)
+				close(fds[i]);
+			break;
+		}
+
+		if (json_output)
+			show_map_close_json(fds[i], &info);
+		else
+			show_map_close_plain(fds[i], &info);
+
+		close(fds[i]);
+	}
+	if (json_output && nb_fds > 1)
+		jsonw_end_array(json_wtr);	/* root array */
+
+exit_free:
+	free(fds);
+	return err;
+}
+
 static int do_show(int argc, char **argv)
 {
 	struct bpf_map_info info = {};
@@ -653,16 +807,8 @@ static int do_show(int argc, char **argv)
 	if (show_pinned)
 		build_pinned_obj_table(&map_table, BPF_OBJ_MAP);
 
-	if (argc == 2) {
-		fd = map_parse_fd_and_info(&argc, &argv, &info, &len);
-		if (fd < 0)
-			return -1;
-
-		if (json_output)
-			return show_map_close_json(fd, &info);
-		else
-			return show_map_close_plain(fd, &info);
-	}
+	if (argc == 2)
+		return do_show_subset(argc, argv);
 
 	if (argc)
 		return BAD_ARG();
@@ -765,26 +911,49 @@ static int dump_map_elem(int fd, void *key, void *value,
 	return 0;
 }
 
-static int do_dump(int argc, char **argv)
+static int maps_have_btf(int *fds, int nb_fds)
 {
 	struct bpf_map_info info = {};
-	void *key, *value, *prev_key;
-	unsigned int num_elems = 0;
 	__u32 len = sizeof(info);
-	json_writer_t *btf_wtr;
 	struct btf *btf = NULL;
-	int err;
-	int fd;
+	int err, i;
 
-	if (argc != 2)
-		usage();
+	for (i = 0; i < nb_fds; i++) {
+		err = bpf_obj_get_info_by_fd(fds[i], &info, &len);
+		if (err) {
+			p_err("can't get map info: %s", strerror(errno));
+			goto err_close;
+		}
 
-	fd = map_parse_fd_and_info(&argc, &argv, &info, &len);
-	if (fd < 0)
-		return -1;
+		err = btf__get_from_id(info.btf_id, &btf);
+		if (err) {
+			p_err("failed to get btf");
+			goto err_close;
+		}
 
-	key = malloc(info.key_size);
-	value = alloc_value(&info);
+		if (!btf)
+			return 0;
+	}
+
+	return 1;
+
+err_close:
+	for (; i < nb_fds; i++)
+		close(fds[i]);
+	return -1;
+}
+
+static int
+map_dump(int fd, struct bpf_map_info *info, json_writer_t *wtr,
+	 bool enable_btf, bool show_header)
+{
+	void *key, *value, *prev_key;
+	unsigned int num_elems = 0;
+	struct btf *btf = NULL;
+	int err;
+
+	key = malloc(info->key_size);
+	value = alloc_value(info);
 	if (!key || !value) {
 		p_err("mem alloc failed");
 		err = -1;
@@ -793,30 +962,32 @@ static int do_dump(int argc, char **argv)
 
 	prev_key = NULL;
 
-	err = btf__get_from_id(info.btf_id, &btf);
-	if (err) {
-		p_err("failed to get btf");
-		goto exit_free;
+	if (enable_btf) {
+		err = btf__get_from_id(info->btf_id, &btf);
+		if (err || !btf) {
+			/* enable_btf is true only if we've already checked
+			 * that all maps have BTF information.
+			 */
+			p_err("failed to get btf");
+			goto exit_free;
+		}
 	}
 
-	if (json_output)
-		jsonw_start_array(json_wtr);
-	else
-		if (btf) {
-			btf_wtr = get_btf_writer();
-			if (!btf_wtr) {
-				p_info("failed to create json writer for btf. falling back to plain output");
-				btf__free(btf);
-				btf = NULL;
-			} else {
-				jsonw_start_array(btf_wtr);
-			}
+	if (wtr) {
+		if (show_header) {
+			jsonw_start_object(wtr);	/* map object */
+			show_map_header_json(info, wtr);
+			jsonw_name(wtr, "elements");
 		}
+		jsonw_start_array(wtr);		/* elements */
+	} else if (show_header) {
+		show_map_header_plain(info);
+	}
 
-	if (info.type == BPF_MAP_TYPE_REUSEPORT_SOCKARRAY &&
-	    info.value_size != 8)
+	if (info->type == BPF_MAP_TYPE_REUSEPORT_SOCKARRAY &&
+	    info->value_size != 8)
 		p_info("Warning: cannot read values from %s map with value_size != 8",
-		       map_type_name[info.type]);
+		       map_type_name[info->type]);
 	while (true) {
 		err = bpf_map_get_next_key(fd, prev_key, key);
 		if (err) {
@@ -824,15 +995,14 @@ static int do_dump(int argc, char **argv)
 				err = 0;
 			break;
 		}
-		num_elems += dump_map_elem(fd, key, value, &info, btf, btf_wtr);
+		num_elems += dump_map_elem(fd, key, value, info, btf, wtr);
 		prev_key = key;
 	}
 
-	if (json_output)
-		jsonw_end_array(json_wtr);
-	else if (btf) {
-		jsonw_end_array(btf_wtr);
-		jsonw_destroy(&btf_wtr);
+	if (wtr) {
+		jsonw_end_array(wtr);	/* elements */
+		if (show_header)
+			jsonw_end_object(wtr);	/* map object */
 	} else {
 		printf("Found %u element%s\n", num_elems,
 		       num_elems != 1 ? "s" : "");
@@ -847,6 +1017,72 @@ exit_free:
 	return err;
 }
 
+static int do_dump(int argc, char **argv)
+{
+	json_writer_t *wtr = NULL, *btf_wtr = NULL;
+	struct bpf_map_info info = {};
+	int nb_fds, i = 0, btf = 0;
+	__u32 len = sizeof(info);
+	int *fds = NULL;
+	int err = -1;
+
+	if (argc != 2)
+		usage();
+
+	fds = malloc(sizeof(int));
+	if (!fds) {
+		p_err("mem alloc failed");
+		return -1;
+	}
+	nb_fds = map_parse_fds(&argc, &argv, &fds);
+	if (nb_fds < 1)
+		goto exit_free;
+
+	if (json_output) {
+		wtr = json_wtr;
+	} else {
+		btf = maps_have_btf(fds, nb_fds);
+		if (btf < 0)
+			goto exit_close;
+		if (btf) {
+			btf_wtr = get_btf_writer();
+			if (btf_wtr) {
+				wtr = btf_wtr;
+			} else {
+				p_info("failed to create json writer for btf. falling back to plain output");
+				btf = 0;
+			}
+		}
+	}
+
+	if (wtr && nb_fds > 1)
+		jsonw_start_array(wtr);	/* root array */
+	for (i = 0; i < nb_fds; i++) {
+		if (bpf_obj_get_info_by_fd(fds[i], &info, &len)) {
+			p_err("can't get map info: %s", strerror(errno));
+			break;
+		}
+		err = map_dump(fds[i], &info, wtr, btf, nb_fds > 1);
+		if (!wtr && i != nb_fds - 1)
+			printf("\n");
+
+		if (err)
+			break;
+		close(fds[i]);
+	}
+	if (wtr && nb_fds > 1)
+		jsonw_end_array(wtr);	/* root array */
+
+	if (btf)
+		jsonw_destroy(&btf_wtr);
+exit_close:
+	for (; i < nb_fds; i++)
+		close(fds[i]);
+exit_free:
+	free(fds);
+	return err;
+}
+
 static int alloc_key_value(struct bpf_map_info *info, void **key, void **value)
 {
 	*key = NULL;
diff --git a/tools/bpf/bpftool/net.c b/tools/bpf/bpftool/net.c
index 4f52d3151616..d93bee298e54 100644
--- a/tools/bpf/bpftool/net.c
+++ b/tools/bpf/bpftool/net.c
@@ -18,6 +18,7 @@
 
 #include <bpf.h>
 #include <nlattr.h>
+#include "libbpf_internal.h"
 #include "main.h"
 #include "netlink_dumper.h"
 
diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index 2ce9c5ba1934..47a61ac42dc0 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -25,6 +25,11 @@
 #include "main.h"
 #include "xlated_dumper.h"
 
+enum dump_mode {
+	DUMP_JITED,
+	DUMP_XLATED,
+};
+
 static const char * const attach_type_strings[] = {
 	[BPF_SK_SKB_STREAM_PARSER] = "stream_parser",
 	[BPF_SK_SKB_STREAM_VERDICT] = "stream_verdict",
@@ -77,11 +82,12 @@ static void print_boot_time(__u64 nsecs, char *buf, unsigned int size)
 		strftime(buf, size, "%FT%T%z", &load_tm);
 }
 
-static int prog_fd_by_tag(unsigned char *tag)
+static int prog_fd_by_nametag(void *nametag, int **fds, bool tag)
 {
 	unsigned int id = 0;
+	int fd, nb_fds = 0;
+	void *tmp;
 	int err;
-	int fd;
 
 	while (true) {
 		struct bpf_prog_info info = {};
@@ -89,36 +95,54 @@ static int prog_fd_by_tag(unsigned char *tag)
 
 		err = bpf_prog_get_next_id(id, &id);
 		if (err) {
-			p_err("%s", strerror(errno));
-			return -1;
+			if (errno != ENOENT) {
+				p_err("%s", strerror(errno));
+				goto err_close_fds;
+			}
+			return nb_fds;
 		}
 
 		fd = bpf_prog_get_fd_by_id(id);
 		if (fd < 0) {
 			p_err("can't get prog by id (%u): %s",
 			      id, strerror(errno));
-			return -1;
+			goto err_close_fds;
 		}
 
 		err = bpf_obj_get_info_by_fd(fd, &info, &len);
 		if (err) {
 			p_err("can't get prog info (%u): %s",
 			      id, strerror(errno));
-			close(fd);
-			return -1;
+			goto err_close_fd;
 		}
 
-		if (!memcmp(tag, info.tag, BPF_TAG_SIZE))
-			return fd;
+		if ((tag && memcmp(nametag, info.tag, BPF_TAG_SIZE)) ||
+		    (!tag && strncmp(nametag, info.name, BPF_OBJ_NAME_LEN))) {
+			close(fd);
+			continue;
+		}
 
-		close(fd);
+		if (nb_fds > 0) {
+			tmp = realloc(*fds, (nb_fds + 1) * sizeof(int));
+			if (!tmp) {
+				p_err("failed to realloc");
+				goto err_close_fd;
+			}
+			*fds = tmp;
+		}
+		(*fds)[nb_fds++] = fd;
 	}
+
+err_close_fd:
+	close(fd);
+err_close_fds:
+	while (--nb_fds >= 0)
+		close((*fds)[nb_fds]);
+	return -1;
 }
 
-int prog_parse_fd(int *argc, char ***argv)
+static int prog_parse_fds(int *argc, char ***argv, int **fds)
 {
-	int fd;
-
 	if (is_prefix(**argv, "id")) {
 		unsigned int id;
 		char *endptr;
@@ -132,10 +156,12 @@ int prog_parse_fd(int *argc, char ***argv)
 		}
 		NEXT_ARGP();
 
-		fd = bpf_prog_get_fd_by_id(id);
-		if (fd < 0)
+		(*fds)[0] = bpf_prog_get_fd_by_id(id);
+		if ((*fds)[0] < 0) {
 			p_err("get by id (%u): %s", id, strerror(errno));
-		return fd;
+			return -1;
+		}
+		return 1;
 	} else if (is_prefix(**argv, "tag")) {
 		unsigned char tag[BPF_TAG_SIZE];
 
@@ -149,7 +175,20 @@ int prog_parse_fd(int *argc, char ***argv)
 		}
 		NEXT_ARGP();
 
-		return prog_fd_by_tag(tag);
+		return prog_fd_by_nametag(tag, fds, true);
+	} else if (is_prefix(**argv, "name")) {
+		char *name;
+
+		NEXT_ARGP();
+
+		name = **argv;
+		if (strlen(name) > BPF_OBJ_NAME_LEN - 1) {
+			p_err("can't parse name");
+			return -1;
+		}
+		NEXT_ARGP();
+
+		return prog_fd_by_nametag(name, fds, false);
 	} else if (is_prefix(**argv, "pinned")) {
 		char *path;
 
@@ -158,13 +197,43 @@ int prog_parse_fd(int *argc, char ***argv)
 		path = **argv;
 		NEXT_ARGP();
 
-		return open_obj_pinned_any(path, BPF_OBJ_PROG);
+		(*fds)[0] = open_obj_pinned_any(path, BPF_OBJ_PROG);
+		if ((*fds)[0] < 0)
+			return -1;
+		return 1;
 	}
 
-	p_err("expected 'id', 'tag' or 'pinned', got: '%s'?", **argv);
+	p_err("expected 'id', 'tag', 'name' or 'pinned', got: '%s'?", **argv);
 	return -1;
 }
 
+int prog_parse_fd(int *argc, char ***argv)
+{
+	int *fds = NULL;
+	int nb_fds, fd;
+
+	fds = malloc(sizeof(int));
+	if (!fds) {
+		p_err("mem alloc failed");
+		return -1;
+	}
+	nb_fds = prog_parse_fds(argc, argv, &fds);
+	if (nb_fds != 1) {
+		if (nb_fds > 1) {
+			p_err("several programs match this handle");
+			while (nb_fds--)
+				close(fds[nb_fds]);
+		}
+		fd = -1;
+		goto exit_free;
+	}
+
+	fd = fds[0];
+exit_free:
+	free(fds);
+	return fd;
+}
+
 static void show_prog_maps(int fd, u32 num_maps)
 {
 	struct bpf_prog_info info = {};
@@ -194,11 +263,8 @@ static void show_prog_maps(int fd, u32 num_maps)
 	}
 }
 
-static void print_prog_json(struct bpf_prog_info *info, int fd)
+static void print_prog_header_json(struct bpf_prog_info *info)
 {
-	char *memlock;
-
-	jsonw_start_object(json_wtr);
 	jsonw_uint_field(json_wtr, "id", info->id);
 	if (info->type < ARRAY_SIZE(prog_type_name))
 		jsonw_string_field(json_wtr, "type",
@@ -219,7 +285,14 @@ static void print_prog_json(struct bpf_prog_info *info, int fd)
 		jsonw_uint_field(json_wtr, "run_time_ns", info->run_time_ns);
 		jsonw_uint_field(json_wtr, "run_cnt", info->run_cnt);
 	}
+}
 
+static void print_prog_json(struct bpf_prog_info *info, int fd)
+{
+	char *memlock;
+
+	jsonw_start_object(json_wtr);
+	print_prog_header_json(info);
 	print_dev_json(info->ifindex, info->netns_dev, info->netns_ino);
 
 	if (info->load_time) {
@@ -268,10 +341,8 @@ static void print_prog_json(struct bpf_prog_info *info, int fd)
 	jsonw_end_object(json_wtr);
 }
 
-static void print_prog_plain(struct bpf_prog_info *info, int fd)
+static void print_prog_header_plain(struct bpf_prog_info *info)
 {
-	char *memlock;
-
 	printf("%u: ", info->id);
 	if (info->type < ARRAY_SIZE(prog_type_name))
 		printf("%s  ", prog_type_name[info->type]);
@@ -289,6 +360,13 @@ static void print_prog_plain(struct bpf_prog_info *info, int fd)
 		printf(" run_time_ns %lld run_cnt %lld",
 		       info->run_time_ns, info->run_cnt);
 	printf("\n");
+}
+
+static void print_prog_plain(struct bpf_prog_info *info, int fd)
+{
+	char *memlock;
+
+	print_prog_header_plain(info);
 
 	if (info->load_time) {
 		char buf[32];
@@ -349,6 +427,40 @@ static int show_prog(int fd)
 	return 0;
 }
 
+static int do_show_subset(int argc, char **argv)
+{
+	int *fds = NULL;
+	int nb_fds, i;
+	int err = -1;
+
+	fds = malloc(sizeof(int));
+	if (!fds) {
+		p_err("mem alloc failed");
+		return -1;
+	}
+	nb_fds = prog_parse_fds(&argc, &argv, &fds);
+	if (nb_fds < 1)
+		goto exit_free;
+
+	if (json_output && nb_fds > 1)
+		jsonw_start_array(json_wtr);	/* root array */
+	for (i = 0; i < nb_fds; i++) {
+		err = show_prog(fds[i]);
+		if (err) {
+			for (; i < nb_fds; i++)
+				close(fds[i]);
+			break;
+		}
+		close(fds[i]);
+	}
+	if (json_output && nb_fds > 1)
+		jsonw_end_array(json_wtr);	/* root array */
+
+exit_free:
+	free(fds);
+	return err;
+}
+
 static int do_show(int argc, char **argv)
 {
 	__u32 id = 0;
@@ -358,15 +470,8 @@ static int do_show(int argc, char **argv)
 	if (show_pinned)
 		build_pinned_obj_table(&prog_table, BPF_OBJ_PROG);
 
-	if (argc == 2) {
-		fd = prog_parse_fd(&argc, &argv);
-		if (fd < 0)
-			return -1;
-
-		err = show_prog(fd);
-		close(fd);
-		return err;
-	}
+	if (argc == 2)
+		return do_show_subset(argc, argv);
 
 	if (argc)
 		return BAD_ARG();
@@ -408,101 +513,32 @@ static int do_show(int argc, char **argv)
 	return err;
 }
 
-static int do_dump(int argc, char **argv)
+static int
+prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
+	  char *filepath, bool opcodes, bool visual, bool linum)
 {
-	struct bpf_prog_info_linear *info_linear;
 	struct bpf_prog_linfo *prog_linfo = NULL;
-	enum {DUMP_JITED, DUMP_XLATED} mode;
 	const char *disasm_opt = NULL;
-	struct bpf_prog_info *info;
 	struct dump_data dd = {};
 	void *func_info = NULL;
 	struct btf *btf = NULL;
-	char *filepath = NULL;
-	bool opcodes = false;
-	bool visual = false;
 	char func_sig[1024];
 	unsigned char *buf;
-	bool linum = false;
 	__u32 member_len;
-	__u64 arrays;
 	ssize_t n;
 	int fd;
 
-	if (is_prefix(*argv, "jited")) {
-		if (disasm_init())
-			return -1;
-		mode = DUMP_JITED;
-	} else if (is_prefix(*argv, "xlated")) {
-		mode = DUMP_XLATED;
-	} else {
-		p_err("expected 'xlated' or 'jited', got: %s", *argv);
-		return -1;
-	}
-	NEXT_ARG();
-
-	if (argc < 2)
-		usage();
-
-	fd = prog_parse_fd(&argc, &argv);
-	if (fd < 0)
-		return -1;
-
-	if (is_prefix(*argv, "file")) {
-		NEXT_ARG();
-		if (!argc) {
-			p_err("expected file path");
-			return -1;
-		}
-
-		filepath = *argv;
-		NEXT_ARG();
-	} else if (is_prefix(*argv, "opcodes")) {
-		opcodes = true;
-		NEXT_ARG();
-	} else if (is_prefix(*argv, "visual")) {
-		visual = true;
-		NEXT_ARG();
-	} else if (is_prefix(*argv, "linum")) {
-		linum = true;
-		NEXT_ARG();
-	}
-
-	if (argc) {
-		usage();
-		return -1;
-	}
-
-	if (mode == DUMP_JITED)
-		arrays = 1UL << BPF_PROG_INFO_JITED_INSNS;
-	else
-		arrays = 1UL << BPF_PROG_INFO_XLATED_INSNS;
-
-	arrays |= 1UL << BPF_PROG_INFO_JITED_KSYMS;
-	arrays |= 1UL << BPF_PROG_INFO_JITED_FUNC_LENS;
-	arrays |= 1UL << BPF_PROG_INFO_FUNC_INFO;
-	arrays |= 1UL << BPF_PROG_INFO_LINE_INFO;
-	arrays |= 1UL << BPF_PROG_INFO_JITED_LINE_INFO;
-
-	info_linear = bpf_program__get_prog_info_linear(fd, arrays);
-	close(fd);
-	if (IS_ERR_OR_NULL(info_linear)) {
-		p_err("can't get prog info: %s", strerror(errno));
-		return -1;
-	}
-
-	info = &info_linear->info;
 	if (mode == DUMP_JITED) {
 		if (info->jited_prog_len == 0 || !info->jited_prog_insns) {
 			p_info("no instructions returned");
-			goto err_free;
+			return -1;
 		}
 		buf = (unsigned char *)(info->jited_prog_insns);
 		member_len = info->jited_prog_len;
 	} else {	/* DUMP_XLATED */
 		if (info->xlated_prog_len == 0) {
 			p_err("error retrieving insn dump: kernel.kptr_restrict set?");
-			goto err_free;
+			return -1;
 		}
 		buf = (unsigned char *)info->xlated_prog_insns;
 		member_len = info->xlated_prog_len;
@@ -510,7 +546,7 @@ static int do_dump(int argc, char **argv)
 
 	if (info->btf_id && btf__get_from_id(info->btf_id, &btf)) {
 		p_err("failed to get btf");
-		goto err_free;
+		return -1;
 	}
 
 	func_info = (void *)info->func_info;
@@ -526,7 +562,7 @@ static int do_dump(int argc, char **argv)
 		if (fd < 0) {
 			p_err("can't open file %s: %s", filepath,
 			      strerror(errno));
-			goto err_free;
+			return -1;
 		}
 
 		n = write(fd, buf, member_len);
@@ -534,7 +570,7 @@ static int do_dump(int argc, char **argv)
 		if (n != member_len) {
 			p_err("error writing output file: %s",
 			      n < 0 ? strerror(errno) : "short write");
-			goto err_free;
+			return -1;
 		}
 
 		if (json_output)
@@ -548,7 +584,7 @@ static int do_dump(int argc, char **argv)
 						     info->netns_ino,
 						     &disasm_opt);
 			if (!name)
-				goto err_free;
+				return -1;
 		}
 
 		if (info->nr_jited_func_lens && info->jited_func_lens) {
@@ -643,12 +679,130 @@ static int do_dump(int argc, char **argv)
 		kernel_syms_destroy(&dd);
 	}
 
-	free(info_linear);
 	return 0;
+}
 
-err_free:
-	free(info_linear);
-	return -1;
+static int do_dump(int argc, char **argv)
+{
+	struct bpf_prog_info_linear *info_linear;
+	char *filepath = NULL;
+	bool opcodes = false;
+	bool visual = false;
+	enum dump_mode mode;
+	bool linum = false;
+	int *fds = NULL;
+	int nb_fds, i = 0;
+	int err = -1;
+	__u64 arrays;
+
+	if (is_prefix(*argv, "jited")) {
+		if (disasm_init())
+			return -1;
+		mode = DUMP_JITED;
+	} else if (is_prefix(*argv, "xlated")) {
+		mode = DUMP_XLATED;
+	} else {
+		p_err("expected 'xlated' or 'jited', got: %s", *argv);
+		return -1;
+	}
+	NEXT_ARG();
+
+	if (argc < 2)
+		usage();
+
+	fds = malloc(sizeof(int));
+	if (!fds) {
+		p_err("mem alloc failed");
+		return -1;
+	}
+	nb_fds = prog_parse_fds(&argc, &argv, &fds);
+	if (nb_fds < 1)
+		goto exit_free;
+
+	if (is_prefix(*argv, "file")) {
+		NEXT_ARG();
+		if (!argc) {
+			p_err("expected file path");
+			goto exit_close;
+		}
+		if (nb_fds > 1) {
+			p_err("several programs matched");
+			goto exit_close;
+		}
+
+		filepath = *argv;
+		NEXT_ARG();
+	} else if (is_prefix(*argv, "opcodes")) {
+		opcodes = true;
+		NEXT_ARG();
+	} else if (is_prefix(*argv, "visual")) {
+		if (nb_fds > 1) {
+			p_err("several programs matched");
+			goto exit_close;
+		}
+
+		visual = true;
+		NEXT_ARG();
+	} else if (is_prefix(*argv, "linum")) {
+		linum = true;
+		NEXT_ARG();
+	}
+
+	if (argc) {
+		usage();
+		goto exit_close;
+	}
+
+	if (mode == DUMP_JITED)
+		arrays = 1UL << BPF_PROG_INFO_JITED_INSNS;
+	else
+		arrays = 1UL << BPF_PROG_INFO_XLATED_INSNS;
+
+	arrays |= 1UL << BPF_PROG_INFO_JITED_KSYMS;
+	arrays |= 1UL << BPF_PROG_INFO_JITED_FUNC_LENS;
+	arrays |= 1UL << BPF_PROG_INFO_FUNC_INFO;
+	arrays |= 1UL << BPF_PROG_INFO_LINE_INFO;
+	arrays |= 1UL << BPF_PROG_INFO_JITED_LINE_INFO;
+
+	if (json_output && nb_fds > 1)
+		jsonw_start_array(json_wtr);	/* root array */
+	for (i = 0; i < nb_fds; i++) {
+		info_linear = bpf_program__get_prog_info_linear(fds[i], arrays);
+		if (IS_ERR_OR_NULL(info_linear)) {
+			p_err("can't get prog info: %s", strerror(errno));
+			break;
+		}
+
+		if (json_output && nb_fds > 1) {
+			jsonw_start_object(json_wtr);	/* prog object */
+			print_prog_header_json(&info_linear->info);
+			jsonw_name(json_wtr, "insns");
+		} else if (nb_fds > 1) {
+			print_prog_header_plain(&info_linear->info);
+		}
+
+		err = prog_dump(&info_linear->info, mode, filepath, opcodes,
+				visual, linum);
+
+		if (json_output && nb_fds > 1)
+			jsonw_end_object(json_wtr);	/* prog object */
+		else if (i != nb_fds - 1 && nb_fds > 1)
+			printf("\n");
+
+		free(info_linear);
+		if (err)
+			break;
+		close(fds[i]);
+	}
+	if (json_output && nb_fds > 1)
+		jsonw_end_array(json_wtr);	/* root array */
+
+exit_close:
+	for (; i < nb_fds; i++)
+		close(fds[i]);
+exit_free:
+	free(fds);
+	return err;
 }
 
 static int do_pin(int argc, char **argv)