diff options
| author | Krzysztof Helt <krzysztof.h1@wp.pl> | 2006-08-21 19:29:18 +0200 |
|---|---|---|
| committer | Jaroslav Kysela <perex@suse.cz> | 2006-09-23 10:42:24 +0200 |
| commit | d1fdf07e22efdb9fa53739c0f0fec1f6b24c2056 (patch) | |
| tree | cb83b26fd0e84741e80a0a053374fe2fff8e995c /sound | |
| parent | 470f1f1a1c2597fab98339ab0966dbf602d604f0 (diff) | |
| download | linux-d1fdf07e22efdb9fa53739c0f0fec1f6b24c2056.tar.bz2 | |
[ALSA] sparc dbri: fixed setting of burst size after reset
A proper way to set DBRI's burst size. The size must be set after
each chip reset.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Diffstat (limited to 'sound')
| -rw-r--r-- | sound/sparc/dbri.c | 17 |
1 files changed, 9 insertions, 8 deletions
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index 6fc37c9cb4fc..810f8b99a60e 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -690,6 +690,7 @@ static void dbri_cmdsend(struct snd_dbri * dbri, volatile s32 * cmd) static void dbri_reset(struct snd_dbri * dbri) { int i; + u32 tmp; dprintk(D_GEN, "reset 0:%x 2:%x 8:%x 9:%x\n", sbus_readl(dbri->regs + REG0), @@ -699,13 +700,20 @@ static void dbri_reset(struct snd_dbri * dbri) sbus_writel(D_R, dbri->regs + REG0); /* Soft Reset */ for (i = 0; (sbus_readl(dbri->regs + REG0) & D_R) && i < 64; i++) udelay(10); + + /* A brute approach - DBRI falls back to working burst size by itself + * On SS20 D_S does not work, so do not try so high. */ + tmp = sbus_readl(dbri->regs + REG0); + tmp |= D_G | D_E; + tmp &= ~D_S; + sbus_writel(tmp, dbri->regs + REG0); } /* Lock must not be held before calling this */ static void dbri_initialize(struct snd_dbri * dbri) { volatile s32 *cmd; - u32 dma_addr, tmp; + u32 dma_addr; unsigned long flags; int n; @@ -721,13 +729,6 @@ static void dbri_initialize(struct snd_dbri * dbri) for (n = 0; n < DBRI_NO_PIPES; n++) dbri->pipes[n].desc = dbri->pipes[n].first_desc = -1; - /* A brute approach - DBRI falls back to working burst size by itself - * On SS20 D_S does not work, so do not try so high. */ - tmp = sbus_readl(dbri->regs + REG0); - tmp |= D_G | D_E; - tmp &= ~D_S; - sbus_writel(tmp, dbri->regs + REG0); - /* * Initialize the interrupt ringbuffer. */ |