diff options
author | Ola Lilja <ola.o.lilja@stericsson.com> | 2012-05-08 15:57:18 +0200 |
---|---|---|
committer | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2012-05-09 12:52:59 +0100 |
commit | 3592b7f69a5438812381ff0aacdea1725ffa1c1c (patch) | |
tree | b24451a32b623d2d1ce71031bdc9033195129fec /sound | |
parent | 41a41eaca48946a69bb0a1f6e053b9e4f1458e15 (diff) | |
download | linux-3592b7f69a5438812381ff0aacdea1725ffa1c1c.tar.bz2 |
ASoC: Ux500: Add MSP I2S-driver
Add driver for running I2S with the MSP-block.
Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com>
[Fixed trailing whitespace -- broonie]
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'sound')
-rw-r--r-- | sound/soc/Kconfig | 1 | ||||
-rw-r--r-- | sound/soc/Makefile | 1 | ||||
-rw-r--r-- | sound/soc/ux500/Kconfig | 15 | ||||
-rw-r--r-- | sound/soc/ux500/Makefile | 4 | ||||
-rw-r--r-- | sound/soc/ux500/ux500_msp_dai.c | 843 | ||||
-rw-r--r-- | sound/soc/ux500/ux500_msp_dai.h | 79 | ||||
-rw-r--r-- | sound/soc/ux500/ux500_msp_i2s.c | 742 | ||||
-rw-r--r-- | sound/soc/ux500/ux500_msp_i2s.h | 553 |
8 files changed, 2238 insertions, 0 deletions
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index a7df779894d5..40b2ad1bb1cd 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -47,6 +47,7 @@ source "sound/soc/s6000/Kconfig" source "sound/soc/sh/Kconfig" source "sound/soc/tegra/Kconfig" source "sound/soc/txx9/Kconfig" +source "sound/soc/ux500/Kconfig" # Supported codecs source "sound/soc/codecs/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index 57d3463ce9d6..70990f4017f4 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -25,3 +25,4 @@ obj-$(CONFIG_SND_SOC) += s6000/ obj-$(CONFIG_SND_SOC) += sh/ obj-$(CONFIG_SND_SOC) += tegra/ obj-$(CONFIG_SND_SOC) += txx9/ +obj-$(CONFIG_SND_SOC) += ux500/ diff --git a/sound/soc/ux500/Kconfig b/sound/soc/ux500/Kconfig new file mode 100644 index 000000000000..ac852347c5dc --- /dev/null +++ b/sound/soc/ux500/Kconfig @@ -0,0 +1,15 @@ +# +# Ux500 SoC audio configuration +# +menuconfig SND_SOC_UX500 + tristate "SoC Audio support for Ux500 platform" + depends on SND_SOC + help + Say Y if you want to enable ASoC-support for + any of the Ux500 platforms (e.g. U8500). + +config SND_SOC_UX500_PLAT_MSP_I2S + tristate "Platform - MSP (I2S)" + depends on SND_SOC_UX500 + help + Say Y if you want to enable the Ux500 MSP I2S-driver. diff --git a/sound/soc/ux500/Makefile b/sound/soc/ux500/Makefile new file mode 100644 index 000000000000..19974c5a2ea1 --- /dev/null +++ b/sound/soc/ux500/Makefile @@ -0,0 +1,4 @@ +# Ux500 Platform Support + +snd-soc-ux500-plat-msp-i2s-objs := ux500_msp_dai.o ux500_msp_i2s.o +obj-$(CONFIG_SND_SOC_UX500_PLAT_MSP_I2S) += snd-soc-ux500-plat-msp-i2s.o diff --git a/sound/soc/ux500/ux500_msp_dai.c b/sound/soc/ux500/ux500_msp_dai.c new file mode 100644 index 000000000000..93c6c40e724c --- /dev/null +++ b/sound/soc/ux500/ux500_msp_dai.c @@ -0,0 +1,843 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Ola Lilja <ola.o.lilja@stericsson.com>, + * Roger Nilsson <roger.xr.nilsson@stericsson.com> + * for ST-Ericsson. + * + * License terms: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/bitops.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/regulator/consumer.h> +#include <linux/mfd/dbx500-prcmu.h> + +#include <mach/hardware.h> +#include <mach/board-mop500-msp.h> + +#include <sound/soc.h> +#include <sound/soc-dai.h> + +#include "ux500_msp_i2s.h" +#include "ux500_msp_dai.h" + +static int setup_pcm_multichan(struct snd_soc_dai *dai, + struct ux500_msp_config *msp_config) +{ + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + struct msp_multichannel_config *multi = + &msp_config->multichannel_config; + + if (drvdata->slots > 1) { + msp_config->multichannel_configured = 1; + + multi->tx_multichannel_enable = true; + multi->rx_multichannel_enable = true; + multi->rx_comparison_enable_mode = MSP_COMPARISON_DISABLED; + + multi->tx_channel_0_enable = drvdata->tx_mask; + multi->tx_channel_1_enable = 0; + multi->tx_channel_2_enable = 0; + multi->tx_channel_3_enable = 0; + + multi->rx_channel_0_enable = drvdata->rx_mask; + multi->rx_channel_1_enable = 0; + multi->rx_channel_2_enable = 0; + multi->rx_channel_3_enable = 0; + + dev_dbg(dai->dev, + "%s: Multichannel enabled. Slots: %d, TX: %u, RX: %u\n", + __func__, drvdata->slots, multi->tx_channel_0_enable, + multi->rx_channel_0_enable); + } + + return 0; +} + +static int setup_frameper(struct snd_soc_dai *dai, unsigned int rate, + struct msp_protdesc *prot_desc) +{ + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + + switch (drvdata->slots) { + case 1: + switch (rate) { + case 8000: + prot_desc->frame_period = + FRAME_PER_SINGLE_SLOT_8_KHZ; + break; + + case 16000: + prot_desc->frame_period = + FRAME_PER_SINGLE_SLOT_16_KHZ; + break; + + case 44100: + prot_desc->frame_period = + FRAME_PER_SINGLE_SLOT_44_1_KHZ; + break; + + case 48000: + prot_desc->frame_period = + FRAME_PER_SINGLE_SLOT_48_KHZ; + break; + + default: + dev_err(dai->dev, + "%s: Error: Unsupported sample-rate (freq = %d)!\n", + __func__, rate); + return -EINVAL; + } + break; + + case 2: + prot_desc->frame_period = FRAME_PER_2_SLOTS; + break; + + case 8: + prot_desc->frame_period = FRAME_PER_8_SLOTS; + break; + + case 16: + prot_desc->frame_period = FRAME_PER_16_SLOTS; + break; + default: + dev_err(dai->dev, + "%s: Error: Unsupported slot-count (slots = %d)!\n", + __func__, drvdata->slots); + return -EINVAL; + } + + prot_desc->clocks_per_frame = + prot_desc->frame_period+1; + + dev_dbg(dai->dev, "%s: Clocks per frame: %u\n", + __func__, + prot_desc->clocks_per_frame); + + return 0; +} + +static int setup_pcm_framing(struct snd_soc_dai *dai, unsigned int rate, + struct msp_protdesc *prot_desc) +{ + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + + u32 frame_length = MSP_FRAME_LEN_1; + prot_desc->frame_width = 0; + + switch (drvdata->slots) { + case 1: + frame_length = MSP_FRAME_LEN_1; + break; + + case 2: + frame_length = MSP_FRAME_LEN_2; + break; + + case 8: + frame_length = MSP_FRAME_LEN_8; + break; + + case 16: + frame_length = MSP_FRAME_LEN_16; + break; + default: + dev_err(dai->dev, + "%s: Error: Unsupported slot-count (slots = %d)!\n", + __func__, drvdata->slots); + return -EINVAL; + } + + prot_desc->tx_frame_len_1 = frame_length; + prot_desc->rx_frame_len_1 = frame_length; + prot_desc->tx_frame_len_2 = frame_length; + prot_desc->rx_frame_len_2 = frame_length; + + prot_desc->tx_elem_len_1 = MSP_ELEM_LEN_16; + prot_desc->rx_elem_len_1 = MSP_ELEM_LEN_16; + prot_desc->tx_elem_len_2 = MSP_ELEM_LEN_16; + prot_desc->rx_elem_len_2 = MSP_ELEM_LEN_16; + + return setup_frameper(dai, rate, prot_desc); +} + +static int setup_clocking(struct snd_soc_dai *dai, + unsigned int fmt, + struct ux500_msp_config *msp_config) +{ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + + case SND_SOC_DAIFMT_NB_IF: + msp_config->tx_fsync_pol ^= 1 << TFSPOL_SHIFT; + msp_config->rx_fsync_pol ^= 1 << RFSPOL_SHIFT; + + break; + + default: + dev_err(dai->dev, + "%s: Error: Unsopported inversion (fmt = 0x%x)!\n", + __func__, fmt); + + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + dev_dbg(dai->dev, "%s: Codec is master.\n", __func__); + + msp_config->iodelay = 0x20; + msp_config->rx_fsync_sel = 0; + msp_config->tx_fsync_sel = 1 << TFSSEL_SHIFT; + msp_config->tx_clk_sel = 0; + msp_config->rx_clk_sel = 0; + msp_config->srg_clk_sel = 0x2 << SCKSEL_SHIFT; + + break; + + case SND_SOC_DAIFMT_CBS_CFS: + dev_dbg(dai->dev, "%s: Codec is slave.\n", __func__); + + msp_config->tx_clk_sel = TX_CLK_SEL_SRG; + msp_config->tx_fsync_sel = TX_SYNC_SRG_PROG; + msp_config->rx_clk_sel = RX_CLK_SEL_SRG; + msp_config->rx_fsync_sel = RX_SYNC_SRG; + msp_config->srg_clk_sel = 1 << SCKSEL_SHIFT; + + break; + + default: + dev_err(dai->dev, "%s: Error: Unsopported master (fmt = 0x%x)!\n", + __func__, fmt); + + return -EINVAL; + } + + return 0; +} + +static int setup_pcm_protdesc(struct snd_soc_dai *dai, + unsigned int fmt, + struct msp_protdesc *prot_desc) +{ + prot_desc->rx_phase_mode = MSP_SINGLE_PHASE; + prot_desc->tx_phase_mode = MSP_SINGLE_PHASE; + prot_desc->rx_phase2_start_mode = MSP_PHASE2_START_MODE_IMEDIATE; + prot_desc->tx_phase2_start_mode = MSP_PHASE2_START_MODE_IMEDIATE; + prot_desc->rx_byte_order = MSP_BTF_MS_BIT_FIRST; + prot_desc->tx_byte_order = MSP_BTF_MS_BIT_FIRST; + prot_desc->tx_fsync_pol = MSP_FSYNC_POL(MSP_FSYNC_POL_ACT_HI); + prot_desc->rx_fsync_pol = MSP_FSYNC_POL_ACT_HI << RFSPOL_SHIFT; + + if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_DSP_A) { + dev_dbg(dai->dev, "%s: DSP_A.\n", __func__); + prot_desc->rx_clk_pol = MSP_RISING_EDGE; + prot_desc->tx_clk_pol = MSP_FALLING_EDGE; + + prot_desc->rx_data_delay = MSP_DELAY_1; + prot_desc->tx_data_delay = MSP_DELAY_1; + } else { + dev_dbg(dai->dev, "%s: DSP_B.\n", __func__); + prot_desc->rx_clk_pol = MSP_FALLING_EDGE; + prot_desc->tx_clk_pol = MSP_RISING_EDGE; + + prot_desc->rx_data_delay = MSP_DELAY_0; + prot_desc->tx_data_delay = MSP_DELAY_0; + } + + prot_desc->rx_half_word_swap = MSP_SWAP_NONE; + prot_desc->tx_half_word_swap = MSP_SWAP_NONE; + prot_desc->compression_mode = MSP_COMPRESS_MODE_LINEAR; + prot_desc->expansion_mode = MSP_EXPAND_MODE_LINEAR; + prot_desc->frame_sync_ignore = MSP_FSYNC_IGNORE; + + return 0; +} + +static int setup_i2s_protdesc(struct msp_protdesc *prot_desc) +{ + prot_desc->rx_phase_mode = MSP_DUAL_PHASE; + prot_desc->tx_phase_mode = MSP_DUAL_PHASE; + prot_desc->rx_phase2_start_mode = MSP_PHASE2_START_MODE_FSYNC; + prot_desc->tx_phase2_start_mode = MSP_PHASE2_START_MODE_FSYNC; + prot_desc->rx_byte_order = MSP_BTF_MS_BIT_FIRST; + prot_desc->tx_byte_order = MSP_BTF_MS_BIT_FIRST; + prot_desc->tx_fsync_pol = MSP_FSYNC_POL(MSP_FSYNC_POL_ACT_LO); + prot_desc->rx_fsync_pol = MSP_FSYNC_POL_ACT_LO << RFSPOL_SHIFT; + + prot_desc->rx_frame_len_1 = MSP_FRAME_LEN_1; + prot_desc->rx_frame_len_2 = MSP_FRAME_LEN_1; + prot_desc->tx_frame_len_1 = MSP_FRAME_LEN_1; + prot_desc->tx_frame_len_2 = MSP_FRAME_LEN_1; + prot_desc->rx_elem_len_1 = MSP_ELEM_LEN_16; + prot_desc->rx_elem_len_2 = MSP_ELEM_LEN_16; + prot_desc->tx_elem_len_1 = MSP_ELEM_LEN_16; + prot_desc->tx_elem_len_2 = MSP_ELEM_LEN_16; + + prot_desc->rx_clk_pol = MSP_RISING_EDGE; + prot_desc->tx_clk_pol = MSP_FALLING_EDGE; + + prot_desc->rx_data_delay = MSP_DELAY_0; + prot_desc->tx_data_delay = MSP_DELAY_0; + + prot_desc->tx_half_word_swap = MSP_SWAP_NONE; + prot_desc->rx_half_word_swap = MSP_SWAP_NONE; + prot_desc->compression_mode = MSP_COMPRESS_MODE_LINEAR; + prot_desc->expansion_mode = MSP_EXPAND_MODE_LINEAR; + prot_desc->frame_sync_ignore = MSP_FSYNC_IGNORE; + + return 0; +} + +static int setup_msp_config(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai, + struct ux500_msp_config *msp_config) +{ + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + struct msp_protdesc *prot_desc = &msp_config->protdesc; + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned int fmt = drvdata->fmt; + int ret; + + memset(msp_config, 0, sizeof(*msp_config)); + + msp_config->f_inputclk = drvdata->master_clk; + + msp_config->tx_fifo_config = TX_FIFO_ENABLE; + msp_config->rx_fifo_config = RX_FIFO_ENABLE; + msp_config->def_elem_len = 1; + msp_config->direction = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? + MSP_DIR_TX : MSP_DIR_RX; + msp_config->data_size = MSP_DATA_BITS_32; + msp_config->frame_freq = runtime->rate; + + dev_dbg(dai->dev, "%s: f_inputclk = %u, frame_freq = %u.\n", + __func__, msp_config->f_inputclk, msp_config->frame_freq); + /* To avoid division by zero */ + prot_desc->clocks_per_frame = 1; + + dev_dbg(dai->dev, "%s: rate: %u, channels: %d.\n", __func__, + runtime->rate, runtime->channels); + switch (fmt & + (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + dev_dbg(dai->dev, "%s: SND_SOC_DAIFMT_I2S.\n", __func__); + + msp_config->default_protdesc = 1; + msp_config->protocol = MSP_I2S_PROTOCOL; + break; + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + dev_dbg(dai->dev, "%s: SND_SOC_DAIFMT_I2S.\n", __func__); + + msp_config->data_size = MSP_DATA_BITS_16; + msp_config->protocol = MSP_I2S_PROTOCOL; + + ret = setup_i2s_protdesc(prot_desc); + if (ret < 0) + return ret; + + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBS_CFS: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM: + dev_dbg(dai->dev, "%s: PCM format.\n", __func__); + + msp_config->data_size = MSP_DATA_BITS_16; + msp_config->protocol = MSP_PCM_PROTOCOL; + + ret = setup_pcm_protdesc(dai, fmt, prot_desc); + if (ret < 0) + return ret; + + ret = setup_pcm_multichan(dai, msp_config); + if (ret < 0) + return ret; + + ret = setup_pcm_framing(dai, runtime->rate, prot_desc); + if (ret < 0) + return ret; + + break; + + default: + dev_err(dai->dev, "%s: Error: Unsopported format (%d)!\n", + __func__, fmt); + return -EINVAL; + } + + return setup_clocking(dai, fmt, msp_config); +} + +static int ux500_msp_dai_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + int ret = 0; + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + + dev_dbg(dai->dev, "%s: MSP %d (%s): Enter.\n", __func__, dai->id, + snd_pcm_stream_str(substream)); + + /* Enable regulator */ + ret = regulator_enable(drvdata->reg_vape); + if (ret != 0) { + dev_err(drvdata->msp->dev, + "%s: Failed to enable regulator!\n", __func__); + return ret; + } + + /* Enable clock */ + dev_dbg(dai->dev, "%s: Enabling MSP-clock.\n", __func__); + clk_enable(drvdata->clk); + + return 0; +} + +static void ux500_msp_dai_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + int ret; + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + bool is_playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK); + + dev_dbg(dai->dev, "%s: MSP %d (%s): Enter.\n", __func__, dai->id, + snd_pcm_stream_str(substream)); + + if (drvdata->vape_opp_constraint == 1) { + prcmu_qos_update_requirement(PRCMU_QOS_APE_OPP, + "ux500_msp_i2s", 50); + drvdata->vape_opp_constraint = 0; + } + + if (ux500_msp_i2s_close(drvdata->msp, + is_playback ? MSP_DIR_TX : MSP_DIR_RX)) { + dev_err(dai->dev, + "%s: Error: MSP %d (%s): Unable to close i2s.\n", + __func__, dai->id, snd_pcm_stream_str(substream)); + } + + /* Disable clock */ + clk_disable(drvdata->clk); + + /* Disable regulator */ + ret = regulator_disable(drvdata->reg_vape); + if (ret < 0) + dev_err(dai->dev, + "%s: ERROR: Failed to disable regulator (%d)!\n", + __func__, ret); +} + +static int ux500_msp_dai_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + int ret = 0; + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + struct snd_pcm_runtime *runtime = substream->runtime; + struct ux500_msp_config msp_config; + + dev_dbg(dai->dev, "%s: MSP %d (%s): Enter (rate = %d).\n", __func__, + dai->id, snd_pcm_stream_str(substream), runtime->rate); + + setup_msp_config(substream, dai, &msp_config); + + ret = ux500_msp_i2s_open(drvdata->msp, &msp_config); + if (ret < 0) { + dev_err(dai->dev, "%s: Error: msp_setup failed (ret = %d)!\n", + __func__, ret); + return ret; + } + + /* Set OPP-level */ + if ((drvdata->fmt & SND_SOC_DAIFMT_MASTER_MASK) && + (drvdata->msp->f_bitclk > 19200000)) { + /* If the bit-clock is higher than 19.2MHz, Vape should be + * run in 100% OPP. Only when bit-clock is used (MSP master) */ + prcmu_qos_update_requirement(PRCMU_QOS_APE_OPP, + "ux500-msp-i2s", 100); + drvdata->vape_opp_constraint = 1; + } else { + prcmu_qos_update_requirement(PRCMU_QOS_APE_OPP, + "ux500-msp-i2s", 50); + drvdata->vape_opp_constraint = 0; + } + + return ret; +} + +static int ux500_msp_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + unsigned int mask, slots_active; + struct snd_pcm_runtime *runtime = substream->runtime; + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + + dev_dbg(dai->dev, "%s: MSP %d (%s): Enter.\n", + __func__, dai->id, snd_pcm_stream_str(substream)); + + switch (drvdata->fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + snd_pcm_hw_constraint_minmax(runtime, + SNDRV_PCM_HW_PARAM_CHANNELS, + 1, 2); + break; + + case SND_SOC_DAIFMT_DSP_B: + case SND_SOC_DAIFMT_DSP_A: + mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? + drvdata->tx_mask : + drvdata->rx_mask; + + slots_active = hweight32(mask); + dev_dbg(dai->dev, "TDM-slots active: %d", slots_active); + + snd_pcm_hw_constraint_minmax(runtime, + SNDRV_PCM_HW_PARAM_CHANNELS, + slots_active, slots_active); + break; + + default: + dev_err(dai->dev, + "%s: Error: Unsupported protocol (fmt = 0x%x)!\n", + __func__, drvdata->fmt); + return -EINVAL; + } + + return 0; +} + +static int ux500_msp_dai_set_dai_fmt(struct snd_soc_dai *dai, + unsigned int fmt) +{ + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + + dev_dbg(dai->dev, "%s: MSP %d: Enter.\n", __func__, dai->id); + + switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK | + SND_SOC_DAIFMT_MASTER_MASK)) { + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBS_CFS: + case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM: + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + break; + + default: + dev_err(dai->dev, + "%s: Error: Unsupported protocol/master (fmt = 0x%x)!\n", + __func__, drvdata->fmt); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + case SND_SOC_DAIFMT_NB_IF: + case SND_SOC_DAIFMT_IB_IF: + break; + + default: + dev_err(dai->dev, + "%s: Error: Unsupported inversion (fmt = 0x%x)!\n", + __func__, drvdata->fmt); + return -EINVAL; + } + + drvdata->fmt = fmt; + return 0; +} + +static int ux500_msp_dai_set_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, + unsigned int rx_mask, + int slots, int slot_width) +{ + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + unsigned int cap; + + switch (slots) { + case 1: + cap = 0x01; + break; + case 2: + cap = 0x03; + break; + case 8: + cap = 0xFF; + break; + case 16: + cap = 0xFFFF; + break; + default: + dev_err(dai->dev, "%s: Error: Unsupported slot-count (%d)!\n", + __func__, slots); + return -EINVAL; + } + drvdata->slots = slots; + + if (!(slot_width == 16)) { + dev_err(dai->dev, "%s: Error: Unsupported slot-width (%d)!\n", + __func__, slot_width); + return -EINVAL; + } + drvdata->slot_width = slot_width; + + drvdata->tx_mask = tx_mask & cap; + drvdata->rx_mask = rx_mask & cap; + + return 0; +} + +static int ux500_msp_dai_set_dai_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + + dev_dbg(dai->dev, "%s: MSP %d: Enter. clk-id: %d, freq: %u.\n", + __func__, dai->id, clk_id, freq); + + switch (clk_id) { + case UX500_MSP_MASTER_CLOCK: + drvdata->master_clk = freq; + break; + + default: + dev_err(dai->dev, "%s: MSP %d: Invalid clk-id (%d)!\n", + __func__, dai->id, clk_id); + return -EINVAL; + } + + return 0; +} + +static int ux500_msp_dai_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + int ret = 0; + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + + dev_dbg(dai->dev, "%s: MSP %d (%s): Enter (msp->id = %d, cmd = %d).\n", + __func__, dai->id, snd_pcm_stream_str(substream), + (int)drvdata->msp->id, cmd); + + ret = ux500_msp_i2s_trigger(drvdata->msp, cmd, substream->stream); + + return ret; +} + +static int ux500_msp_dai_probe(struct snd_soc_dai *dai) +{ + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev); + + drvdata->playback_dma_data.dma_cfg = drvdata->msp->dma_cfg_tx; + drvdata->capture_dma_data.dma_cfg = drvdata->msp->dma_cfg_rx; + + dai->playback_dma_data = &drvdata->playback_dma_data; + dai->capture_dma_data = &drvdata->capture_dma_data; + + drvdata->playback_dma_data.data_size = drvdata->slot_width; + drvdata->capture_dma_data.data_size = drvdata->slot_width; + + return 0; +} + +static struct snd_soc_dai_ops ux500_msp_dai_ops[] = { + { + .set_sysclk = ux500_msp_dai_set_dai_sysclk, + .set_fmt = ux500_msp_dai_set_dai_fmt, + .set_tdm_slot = ux500_msp_dai_set_tdm_slot, + .startup = ux500_msp_dai_startup, + .shutdown = ux500_msp_dai_shutdown, + .prepare = ux500_msp_dai_prepare, + .trigger = ux500_msp_dai_trigger, + .hw_params = ux500_msp_dai_hw_params, + } +}; + +static struct snd_soc_dai_driver ux500_msp_dai_drv[UX500_NBR_OF_DAI] = { + { + .name = "ux500-msp-i2s.0", + .probe = ux500_msp_dai_probe, + .id = 0, + .suspend = NULL, + .resume = NULL, + .playback = { + .channels_min = UX500_MSP_MIN_CHANNELS, + .channels_max = UX500_MSP_MAX_CHANNELS, + .rates = UX500_I2S_RATES, + .formats = UX500_I2S_FORMATS, + }, + .capture = { + .channels_min = UX500_MSP_MIN_CHANNELS, + .channels_max = UX500_MSP_MAX_CHANNELS, + .rates = UX500_I2S_RATES, + .formats = UX500_I2S_FORMATS, + }, + .ops = ux500_msp_dai_ops, + }, + { + .name = "ux500-msp-i2s.1", + .probe = ux500_msp_dai_probe, + .id = 1, + .suspend = NULL, + .resume = NULL, + .playback = { + .channels_min = UX500_MSP_MIN_CHANNELS, + .channels_max = UX500_MSP_MAX_CHANNELS, + .rates = UX500_I2S_RATES, + .formats = UX500_I2S_FORMATS, + }, + .capture = { + .channels_min = UX500_MSP_MIN_CHANNELS, + .channels_max = UX500_MSP_MAX_CHANNELS, + .rates = UX500_I2S_RATES, + .formats = UX500_I2S_FORMATS, + }, + .ops = ux500_msp_dai_ops, + }, + { + .name = "ux500-msp-i2s.2", + .id = 2, + .probe = ux500_msp_dai_probe, + .suspend = NULL, + .resume = NULL, + .playback = { + .channels_min = UX500_MSP_MIN_CHANNELS, + .channels_max = UX500_MSP_MAX_CHANNELS, + .rates = UX500_I2S_RATES, + .formats = UX500_I2S_FORMATS, + }, + .capture = { + .channels_min = UX500_MSP_MIN_CHANNELS, + .channels_max = UX500_MSP_MAX_CHANNELS, + .rates = UX500_I2S_RATES, + .formats = UX500_I2S_FORMATS, + }, + .ops = ux500_msp_dai_ops, + }, + { + .name = "ux500-msp-i2s.3", + .probe = ux500_msp_dai_probe, + .id = 3, + .suspend = NULL, + .resume = NULL, + .playback = { + .channels_min = UX500_MSP_MIN_CHANNELS, + .channels_max = UX500_MSP_MAX_CHANNELS, + .rates = UX500_I2S_RATES, + .formats = UX500_I2S_FORMATS, + }, + .capture = { + .channels_min = UX500_MSP_MIN_CHANNELS, + .channels_max = UX500_MSP_MAX_CHANNELS, + .rates = UX500_I2S_RATES, + .formats = UX500_I2S_FORMATS, + }, + .ops = ux500_msp_dai_ops, + }, +}; + +static int __devinit ux500_msp_drv_probe(struct platform_device *pdev) +{ + struct ux500_msp_i2s_drvdata *drvdata; + int ret = 0; + + dev_dbg(&pdev->dev, "%s: Enter (pdev->name = %s).\n", __func__, + pdev->name); + + drvdata = devm_kzalloc(&pdev->dev, + sizeof(struct ux500_msp_i2s_drvdata), + GFP_KERNEL); + drvdata->fmt = 0; + drvdata->slots = 1; + drvdata->tx_mask = 0x01; + drvdata->rx_mask = 0x01; + drvdata->slot_width = 16; + drvdata->master_clk = MSP_INPUT_FREQ_APB; + + drvdata->reg_vape = devm_regulator_get(&pdev->dev, "v-ape"); + if (IS_ERR(drvdata->reg_vape)) { + ret = (int)PTR_ERR(drvdata->reg_vape); + dev_err(&pdev->dev, + "%s: ERROR: Failed to get Vape supply (%d)!\n", + __func__, ret); + return ret; + } + prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP, (char *)pdev->name, 50); + + drvdata->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(drvdata->clk)) { + ret = (int)PTR_ERR(drvdata->clk); + dev_err(&pdev->dev, "%s: ERROR: clk_get failed (%d)!\n", + __func__, ret); + goto err_clk; + } + + ret = ux500_msp_i2s_init_msp(pdev, &drvdata->msp, + pdev->dev.platform_data); + if (!drvdata->msp) { + dev_err(&pdev->dev, + "%s: ERROR: Failed to init MSP-struct (%d)!", + __func__, ret); + goto err_init_msp; + } + dev_set_drvdata(&pdev->dev, drvdata); + + ret = snd_soc_register_dai(&pdev->dev, + &ux500_msp_dai_drv[drvdata->msp->id]); + if (ret < 0) { + dev_err(&pdev->dev, "Error: %s: Failed to register MSP%d!\n", + __func__, drvdata->msp->id); + goto err_init_msp; + } + + return 0; + +err_init_msp: + clk_put(drvdata->clk); + +err_clk: + devm_regulator_put(drvdata->reg_vape); + + return ret; +} + +static int __devexit ux500_msp_drv_remove(struct platform_device *pdev) +{ + struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(&pdev->dev); + + snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(ux500_msp_dai_drv)); + + devm_regulator_put(drvdata->reg_vape); + prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP, "ux500_msp_i2s"); + + clk_put(drvdata->clk); + + ux500_msp_i2s_cleanup_msp(pdev, drvdata->msp); + + return 0; +} + +static struct platform_driver msp_i2s_driver = { + .driver = { + .name = "ux500-msp-i2s", + .owner = THIS_MODULE, + }, + .probe = ux500_msp_drv_probe, + .remove = ux500_msp_drv_remove, +}; +module_platform_driver(msp_i2s_driver); + +MODULE_LICENSE("GPLv2"); diff --git a/sound/soc/ux500/ux500_msp_dai.h b/sound/soc/ux500/ux500_msp_dai.h new file mode 100644 index 000000000000..98202a34a5dd --- /dev/null +++ b/sound/soc/ux500/ux500_msp_dai.h @@ -0,0 +1,79 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Ola Lilja <ola.o.lilja@stericsson.com>, + * Roger Nilsson <roger.xr.nilsson@stericsson.com> + * for ST-Ericsson. + * + * License terms: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef UX500_msp_dai_H +#define UX500_msp_dai_H + +#include <linux/types.h> +#include <linux/spinlock.h> + +#include "ux500_msp_i2s.h" + +#define UX500_NBR_OF_DAI 4 + +#define UX500_I2S_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | \ + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) + +#define UX500_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE) + +#define FRAME_PER_SINGLE_SLOT_8_KHZ 31 +#define FRAME_PER_SINGLE_SLOT_16_KHZ 124 +#define FRAME_PER_SINGLE_SLOT_44_1_KHZ 63 +#define FRAME_PER_SINGLE_SLOT_48_KHZ 49 +#define FRAME_PER_2_SLOTS 31 +#define FRAME_PER_8_SLOTS 138 +#define FRAME_PER_16_SLOTS 277 + +#ifndef CONFIG_SND_SOC_UX500_AB5500 +#define UX500_MSP_INTERNAL_CLOCK_FREQ 40000000 +#define UX500_MSP1_INTERNAL_CLOCK_FREQ UX500_MSP_INTERNAL_CLOCK_FREQ +#else +#define UX500_MSP_INTERNAL_CLOCK_FREQ 13000000 +#define UX500_MSP1_INTERNAL_CLOCK_FREQ (UX500_MSP_INTERNAL_CLOCK_FREQ * 2) +#endif + +#define UX500_MSP_MIN_CHANNELS 1 +#define UX500_MSP_MAX_CHANNELS 8 + +#define PLAYBACK_CONFIGURED 1 +#define CAPTURE_CONFIGURED 2 + +enum ux500_msp_clock_id { + UX500_MSP_MASTER_CLOCK, +}; + +struct ux500_msp_i2s_drvdata { + struct ux500_msp *msp; + struct regulator *reg_vape; + struct ux500_msp_dma_params playback_dma_data; + struct ux500_msp_dma_params capture_dma_data; + unsigned int fmt; + unsigned int tx_mask; + unsigned int rx_mask; + int slots; + int slot_width; + u8 configured; + int data_delay; + + /* Clocks */ + unsigned int master_clk; + struct clk *clk; + + /* Regulators */ + int vape_opp_constraint; +}; + +int ux500_msp_dai_set_data_delay(struct snd_soc_dai *dai, int delay); + +#endif diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c new file mode 100644 index 000000000000..496dec10c96e --- /dev/null +++ b/sound/soc/ux500/ux500_msp_i2s.c @@ -0,0 +1,742 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Ola Lilja <ola.o.lilja@stericsson.com>, + * Roger Nilsson <roger.xr.nilsson@stericsson.com>, + * Sandeep Kaushik <sandeep.kaushik@st.com> + * for ST-Ericsson. + * + * License terms: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/slab.h> + +#include <mach/hardware.h> +#include <mach/board-mop500-msp.h> + +#include <sound/soc.h> + +#include "ux500_msp_i2s.h" + + /* Protocol desciptors */ +static const struct msp_protdesc prot_descs[] = { + { /* I2S */ + MSP_SINGLE_PHASE, + MSP_SINGLE_PHASE, + MSP_PHASE2_START_MODE_IMEDIATE, + MSP_PHASE2_START_MODE_IMEDIATE, + MSP_BTF_MS_BIT_FIRST, + MSP_BTF_MS_BIT_FIRST, + MSP_FRAME_LEN_1, + MSP_FRAME_LEN_1, + MSP_FRAME_LEN_1, + MSP_FRAME_LEN_1, + MSP_ELEM_LEN_32, + MSP_ELEM_LEN_32, + MSP_ELEM_LEN_32, + MSP_ELEM_LEN_32, + MSP_DELAY_1, + MSP_DELAY_1, + MSP_RISING_EDGE, + MSP_FALLING_EDGE, + MSP_FSYNC_POL_ACT_LO, + MSP_FSYNC_POL_ACT_LO, + MSP_SWAP_NONE, + MSP_SWAP_NONE, + MSP_COMPRESS_MODE_LINEAR, + MSP_EXPAND_MODE_LINEAR, + MSP_FSYNC_IGNORE, + 31, + 15, + 32, + }, { /* PCM */ + MSP_DUAL_PHASE, + MSP_DUAL_PHASE, + MSP_PHASE2_START_MODE_FSYNC, + MSP_PHASE2_START_MODE_FSYNC, + MSP_BTF_MS_BIT_FIRST, + MSP_BTF_MS_BIT_FIRST, + MSP_FRAME_LEN_1, + MSP_FRAME_LEN_1, + MSP_FRAME_LEN_1, + MSP_FRAME_LEN_1, + MSP_ELEM_LEN_16, + MSP_ELEM_LEN_16, + MSP_ELEM_LEN_16, + MSP_ELEM_LEN_16, + MSP_DELAY_0, + MSP_DELAY_0, + MSP_RISING_EDGE, + MSP_FALLING_EDGE, + MSP_FSYNC_POL_ACT_HI, + MSP_FSYNC_POL_ACT_HI, + MSP_SWAP_NONE, + MSP_SWAP_NONE, + MSP_COMPRESS_MODE_LINEAR, + MSP_EXPAND_MODE_LINEAR, + MSP_FSYNC_IGNORE, + 255, + 0, + 256, + }, { /* Companded PCM */ + MSP_SINGLE_PHASE, + MSP_SINGLE_PHASE, + MSP_PHASE2_START_MODE_FSYNC, + MSP_PHASE2_START_MODE_FSYNC, + MSP_BTF_MS_BIT_FIRST, + MSP_BTF_MS_BIT_FIRST, + MSP_FRAME_LEN_1, + MSP_FRAME_LEN_1, + MSP_FRAME_LEN_1, + MSP_FRAME_LEN_1, + MSP_ELEM_LEN_8, + MSP_ELEM_LEN_8, + MSP_ELEM_LEN_8, + MSP_ELEM_LEN_8, + MSP_DELAY_0, + MSP_DELAY_0, + MSP_RISING_EDGE, + MSP_RISING_EDGE, + MSP_FSYNC_POL_ACT_HI, + MSP_FSYNC_POL_ACT_HI, + MSP_SWAP_NONE, + MSP_SWAP_NONE, + MSP_COMPRESS_MODE_LINEAR, + MSP_EXPAND_MODE_LINEAR, + MSP_FSYNC_IGNORE, + 255, + 0, + 256, + }, +}; + +static void set_prot_desc_tx(struct ux500_msp *msp, + struct msp_protdesc *protdesc, + enum msp_data_size data_size) +{ + u32 temp_reg = 0; + + temp_reg |= MSP_P2_ENABLE_BIT(protdesc->tx_phase_mode); + temp_reg |= MSP_P2_START_MODE_BIT(protdesc->tx_phase2_start_mode); + temp_reg |= MSP_P1_FRAME_LEN_BITS(protdesc->tx_frame_len_1); + temp_reg |= MSP_P2_FRAME_LEN_BITS(protdesc->tx_frame_len_2); + if (msp->def_elem_len) { + temp_reg |= MSP_P1_ELEM_LEN_BITS(protdesc->tx_elem_len_1); + temp_reg |= MSP_P2_ELEM_LEN_BITS(protdesc->tx_elem_len_2); + } else { + temp_reg |= MSP_P1_ELEM_LEN_BITS(data_size); + temp_reg |= MSP_P2_ELEM_LEN_BITS(data_size); + } + temp_reg |= MSP_DATA_DELAY_BITS(protdesc->tx_data_delay); + temp_reg |= MSP_SET_ENDIANNES_BIT(protdesc->tx_byte_order); + temp_reg |= MSP_FSYNC_POL(protdesc->tx_fsync_pol); + temp_reg |= MSP_DATA_WORD_SWAP(protdesc->tx_half_word_swap); + temp_reg |= MSP_SET_COMPANDING_MODE(protdesc->compression_mode); + temp_reg |= MSP_SET_FSYNC_IGNORE(protdesc->frame_sync_ignore); + + writel(temp_reg, msp->registers + MSP_TCF); +} + +static void set_prot_desc_rx(struct ux500_msp *msp, + struct msp_protdesc *protdesc, + enum msp_data_size data_size) +{ + u32 temp_reg = 0; + + temp_reg |= MSP_P2_ENABLE_BIT(protdesc->rx_phase_mode); + temp_reg |= MSP_P2_START_MODE_BIT(protdesc->rx_phase2_start_mode); + temp_reg |= MSP_P1_FRAME_LEN_BITS(protdesc->rx_frame_len_1); + temp_reg |= MSP_P2_FRAME_LEN_BITS(protdesc->rx_frame_len_2); + if (msp->def_elem_len) { + temp_reg |= MSP_P1_ELEM_LEN_BITS(protdesc->rx_elem_len_1); + temp_reg |= MSP_P2_ELEM_LEN_BITS(protdesc->rx_elem_len_2); + } else { + temp_reg |= MSP_P1_ELEM_LEN_BITS(data_size); + temp_reg |= MSP_P2_ELEM_LEN_BITS(data_size); + } + + temp_reg |= MSP_DATA_DELAY_BITS(protdesc->rx_data_delay); + temp_reg |= MSP_SET_ENDIANNES_BIT(protdesc->rx_byte_order); + temp_reg |= MSP_FSYNC_POL(protdesc->rx_fsync_pol); + temp_reg |= MSP_DATA_WORD_SWAP(protdesc->rx_half_word_swap); + temp_reg |= MSP_SET_COMPANDING_MODE(protdesc->expansion_mode); + temp_reg |= MSP_SET_FSYNC_IGNORE(protdesc->frame_sync_ignore); + + writel(temp_reg, msp->registers + MSP_RCF); +} + +static int configure_protocol(struct ux500_msp *msp, + struct ux500_msp_config *config) +{ + struct msp_protdesc *protdesc; + enum msp_data_size data_size; + u32 temp_reg = 0; + + data_size = config->data_size; + msp->def_elem_len = config->def_elem_len; + if (config->default_protdesc == 1) { + if (config->protocol >= MSP_INVALID_PROTOCOL) { + dev_err(msp->dev, "%s: ERROR: Invalid protocol!\n", + __func__); + return -EINVAL; + } + protdesc = + (struct msp_protdesc *)&prot_descs[config->protocol]; + } else { + protdesc = (struct msp_protdesc *)&config->protdesc; + } + + if (data_size < MSP_DATA_BITS_DEFAULT || data_size > MSP_DATA_BITS_32) { + dev_err(msp->dev, + "%s: ERROR: Invalid data-size requested (data_size = %d)!\n", + __func__, data_size); + return -EINVAL; + } + + if (config->direction & MSP_DIR_TX) + set_prot_desc_tx(msp, protdesc, data_size); + if (config->direction & MSP_DIR_RX) + set_prot_desc_rx(msp, protdesc, data_size); + + /* The code below should not be separated. */ + temp_reg = readl(msp->registers + MSP_GCR) & ~TX_CLK_POL_RISING; + temp_reg |= MSP_TX_CLKPOL_BIT(~protdesc->tx_clk_pol); + writel(temp_reg, msp->registers + MSP_GCR); + temp_reg = readl(msp->registers + MSP_GCR) & ~RX_CLK_POL_RISING; + temp_reg |= MSP_RX_CLKPOL_BIT(protdesc->rx_clk_pol); + writel(temp_reg, msp->registers + MSP_GCR); + + return 0; +} + +static int setup_bitclk(struct ux500_msp *msp, struct ux500_msp_config *config) +{ + u32 reg_val_GCR; + u32 frame_per = 0; + u32 sck_div = 0; + u32 frame_width = 0; + u32 temp_reg = 0; + struct msp_protdesc *protdesc = NULL; + + reg_val_GCR = readl(msp->registers + MSP_GCR); + writel(reg_val_GCR & ~SRG_ENABLE, msp->registers + MSP_GCR); + + if (config->default_protdesc) + protdesc = + (struct msp_protdesc *)&prot_descs[config->protocol]; + else + protdesc = (struct msp_protdesc *)&config->protdesc; + + switch (config->protocol) { + case MSP_PCM_PROTOCOL: + case MSP_PCM_COMPAND_PROTOCOL: + frame_width = protdesc->frame_width; + sck_div = config->f_inputclk / (config->frame_freq * + (protdesc->clocks_per_frame)); + frame_per = protdesc->frame_period; + break; + case MSP_I2S_PROTOCOL: + frame_width = protdesc->frame_width; + sck_div = config->f_inputclk / (config->frame_freq * + (protdesc->clocks_per_frame)); + frame_per = protdesc->frame_period; + break; + default: + dev_err(msp->dev, "%s: ERROR: Unknown protocol (%d)!\n", + __func__, + config->protocol); + return -EINVAL; + } + + temp_reg = (sck_div - 1) & SCK_DIV_MASK; + temp_reg |= FRAME_WIDTH_BITS(frame_width); + temp_reg |= FRAME_PERIOD_BITS(frame_per); + writel(temp_reg, msp->registers + MSP_SRG); + + msp->f_bitclk = (config->f_inputclk)/(sck_div + 1); + + /* Enable bit-clock */ + udelay(100); + reg_val_GCR = readl(msp->registers + MSP_GCR); + writel(reg_val_GCR | SRG_ENABLE, msp->registers + MSP_GCR); + udelay(100); + + return 0; +} + +static int configure_multichannel(struct ux500_msp *msp, + struct ux500_msp_config *config) +{ + struct msp_protdesc *protdesc; + struct msp_multichannel_config *mcfg; + u32 reg_val_MCR; + + if (config->default_protdesc == 1) { + if (config->protocol >= MSP_INVALID_PROTOCOL) { + dev_err(msp->dev, + "%s: ERROR: Invalid protocol (%d)!\n", + __func__, config->protocol); + return -EINVAL; + } + protdesc = (struct msp_protdesc *) + &prot_descs[config->protocol]; + } else { + protdesc = (struct msp_protdesc *)&config->protdesc; + } + + mcfg = &config->multichannel_config; + if (mcfg->tx_multichannel_enable) { + if (protdesc->tx_phase_mode == MSP_SINGLE_PHASE) { + reg_val_MCR = readl(msp->registers + MSP_MCR); + writel(reg_val_MCR | (mcfg->tx_multichannel_enable ? + 1 << TMCEN_BIT : 0), + msp->registers + MSP_MCR); + writel(mcfg->tx_channel_0_enable, + msp->registers + MSP_TCE0); + writel(mcfg->tx_channel_1_enable, + msp->registers + MSP_TCE1); + writel(mcfg->tx_channel_2_enable, + msp->registers + MSP_TCE2); + writel(mcfg->tx_channel_3_enable, + msp->registers + MSP_TCE3); + } else { + dev_err(msp->dev, + "%s: ERROR: Only single-phase supported (TX-mode: %d)!\n", + __func__, protdesc->tx_phase_mode); + return -EINVAL; + } + } + if (mcfg->rx_multichannel_enable) { + if (protdesc->rx_phase_mode == MSP_SINGLE_PHASE) { + reg_val_MCR = readl(msp->registers + MSP_MCR); + writel(reg_val_MCR | (mcfg->rx_multichannel_enable ? + 1 << RMCEN_BIT : 0), + msp->registers + MSP_MCR); + writel(mcfg->rx_channel_0_enable, + msp->registers + MSP_RCE0); + writel(mcfg->rx_channel_1_enable, + msp->registers + MSP_RCE1); + writel(mcfg->rx_channel_2_enable, + msp->registers + MSP_RCE2); + writel(mcfg->rx_channel_3_enable, + msp->registers + MSP_RCE3); + } else { + dev_err(msp->dev, + "%s: ERROR: Only single-phase supported (RX-mode: %d)!\n", + __func__, protdesc->rx_phase_mode); + return -EINVAL; + } + if (mcfg->rx_comparison_enable_mode) { + reg_val_MCR = readl(msp->registers + MSP_MCR); + writel(reg_val_MCR | + (mcfg->rx_comparison_enable_mode << RCMPM_BIT), + msp->registers + MSP_MCR); + + writel(mcfg->comparison_mask, + msp->registers + MSP_RCM); + writel(mcfg->comparison_value, + msp->registers + MSP_RCV); + + } + } + + return 0; +} + +static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config) +{ + int status = 0; + u32 reg_val_DMACR, reg_val_GCR; + + /* Check msp state whether in RUN or CONFIGURED Mode */ + if ((msp->msp_state == MSP_STATE_IDLE) && (msp->plat_init)) { + status = msp->plat_init(); + if (status) { + dev_err(msp->dev, "%s: ERROR: Failed to init MSP (%d)!\n", + __func__, status); + return status; + } + } + + /* Configure msp with protocol dependent settings */ + configure_protocol(msp, config); + setup_bitclk(msp, config); + if (config->multichannel_configured == 1) { + status = configure_multichannel(msp, config); + if (status) + dev_warn(msp->dev, + "%s: WARN: configure_multichannel failed (%d)!\n", + __func__, status); + } + + /* Make sure the correct DMA-directions are configured */ + if ((config->direction & MSP_DIR_RX) && (!msp->dma_cfg_rx)) { + dev_err(msp->dev, "%s: ERROR: MSP RX-mode is not configured!", + __func__); + return -EINVAL; + } + if ((config->direction == MSP_DIR_TX) && (!msp->dma_cfg_tx)) { + dev_err(msp->dev, "%s: ERROR: MSP TX-mode is not configured!", + __func__); + return -EINVAL; + } + + reg_val_DMACR = readl(msp->registers + MSP_DMACR); + if (config->direction & MSP_DIR_RX) + reg_val_DMACR |= RX_DMA_ENABLE; + if (config->direction & MSP_DIR_TX) + reg_val_DMACR |= TX_DMA_ENABLE; + writel(reg_val_DMACR, msp->registers + MSP_DMACR); + + writel(config->iodelay, msp->registers + MSP_IODLY); + + /* Enable frame generation logic */ + reg_val_GCR = readl(msp->registers + MSP_GCR); + writel(reg_val_GCR | FRAME_GEN_ENABLE, msp->registers + MSP_GCR); + + return status; +} + +static void flush_fifo_rx(struct ux500_msp *msp) +{ + u32 reg_val_DR, reg_val_GCR, reg_val_FLR; + u32 limit = 32; + + reg_val_GCR = readl(msp->registers + MSP_GCR); + writel(reg_val_GCR | RX_ENABLE, msp->registers + MSP_GCR); + + reg_val_FLR = readl(msp->registers + MSP_FLR); + while (!(reg_val_FLR & RX_FIFO_EMPTY) && limit--) { + reg_val_DR = readl(msp->registers + MSP_DR); + reg_val_FLR = readl(msp->registers + MSP_FLR); + } + + writel(reg_val_GCR, msp->registers + MSP_GCR); +} + +static void flush_fifo_tx(struct ux500_msp *msp) +{ + u32 reg_val_TSTDR, reg_val_GCR, reg_val_FLR; + u32 limit = 32; + + reg_val_GCR = readl(msp->registers + MSP_GCR); + writel(reg_val_GCR | TX_ENABLE, msp->registers + MSP_GCR); + writel(MSP_ITCR_ITEN | MSP_ITCR_TESTFIFO, msp->registers + MSP_ITCR); + + reg_val_FLR = readl(msp->registers + MSP_FLR); + while (!(reg_val_FLR & TX_FIFO_EMPTY) && limit--) { + reg_val_TSTDR = readl(msp->registers + MSP_TSTDR); + reg_val_FLR = readl(msp->registers + MSP_FLR); + } + writel(0x0, msp->registers + MSP_ITCR); + writel(reg_val_GCR, msp->registers + MSP_GCR); +} + +int ux500_msp_i2s_open(struct ux500_msp *msp, + struct ux500_msp_config *config) +{ + u32 old_reg, new_reg, mask; + int res; + unsigned int tx_sel, rx_sel, tx_busy, rx_busy; + + if (in_interrupt()) { + dev_err(msp->dev, + "%s: ERROR: Open called in interrupt context!\n", + __func__); + return -1; + } + + tx_sel = (config->direction & MSP_DIR_TX) > 0; + rx_sel = (config->direction & MSP_DIR_RX) > 0; + if (!tx_sel && !rx_sel) { + dev_err(msp->dev, "%s: Error: No direction selected!\n", + __func__); + return -EINVAL; + } + + tx_busy = (msp->dir_busy & MSP_DIR_TX) > 0; + rx_busy = (msp->dir_busy & MSP_DIR_RX) > 0; + if (tx_busy && tx_sel) { + dev_err(msp->dev, "%s: Error: TX is in use!\n", __func__); + return -EBUSY; + } + if (rx_busy && rx_sel) { + dev_err(msp->dev, "%s: Error: RX is in use!\n", __func__); + return -EBUSY; + } + + msp->dir_busy |= (tx_sel ? MSP_DIR_TX : 0) | (rx_sel ? MSP_DIR_RX : 0); + + /* First do the global config register */ + mask = RX_CLK_SEL_MASK | TX_CLK_SEL_MASK | RX_FSYNC_MASK | + TX_FSYNC_MASK | RX_SYNC_SEL_MASK | TX_SYNC_SEL_MASK | + RX_FIFO_ENABLE_MASK | TX_FIFO_ENABLE_MASK | SRG_CLK_SEL_MASK | + LOOPBACK_MASK | TX_EXTRA_DELAY_MASK; + + new_reg = (config->tx_clk_sel | config->rx_clk_sel | + config->rx_fsync_pol | config->tx_fsync_pol | + config->rx_fsync_sel | config->tx_fsync_sel | + config->rx_fifo_config | config->tx_fifo_config | + config->srg_clk_sel | config->loopback_enable | + config->tx_data_enable); + + old_reg = readl(msp->registers + MSP_GCR); + old_reg &= ~mask; + new_reg |= old_reg; + writel(new_reg, msp->registers + MSP_GCR); + + res = enable_msp(msp, config); + if (res < 0) { + dev_err(msp->dev, "%s: ERROR: enable_msp failed (%d)!\n", + __func__, res); + return -EBUSY; + } + if (config->loopback_enable & 0x80) + msp->loopback_enable = 1; + + /* Flush FIFOs */ + flush_fifo_tx(msp); + flush_fifo_rx(msp); + + msp->msp_state = MSP_STATE_CONFIGURED; + return 0; +} + +static void disable_msp_rx(struct ux500_msp *msp) +{ + u32 reg_val_GCR, reg_val_DMACR, reg_val_IMSC; + + reg_val_GCR = readl(msp->registers + MSP_GCR); + writel(reg_val_GCR & ~RX_ENABLE, msp->registers + MSP_GCR); + reg_val_DMACR = readl(msp->registers + MSP_DMACR); + writel(reg_val_DMACR & ~RX_DMA_ENABLE, msp->registers + MSP_DMACR); + reg_val_IMSC = readl(msp->registers + MSP_IMSC); + writel(reg_val_IMSC & + ~(RX_SERVICE_INT | RX_OVERRUN_ERROR_INT), + msp->registers + MSP_IMSC); + + msp->dir_busy &= ~MSP_DIR_RX; +} + +static void disable_msp_tx(struct ux500_msp *msp) +{ + u32 reg_val_GCR, reg_val_DMACR, reg_val_IMSC; + + reg_val_GCR = readl(msp->registers + MSP_GCR); + writel(reg_val_GCR & ~TX_ENABLE, msp->registers + MSP_GCR); + reg_val_DMACR = readl(msp->registers + MSP_DMACR); + writel(reg_val_DMACR & ~TX_DMA_ENABLE, msp->registers + MSP_DMACR); + reg_val_IMSC = readl(msp->registers + MSP_IMSC); + writel(reg_val_IMSC & + ~(TX_SERVICE_INT | TX_UNDERRUN_ERR_INT), + msp->registers + MSP_IMSC); + + msp->dir_busy &= ~MSP_DIR_TX; +} + +static int disable_msp(struct ux500_msp *msp, unsigned int dir) +{ + u32 reg_val_GCR; + int status = 0; + unsigned int disable_tx, disable_rx; + + reg_val_GCR = readl(msp->registers + MSP_GCR); + disable_tx = dir & MSP_DIR_TX; + disable_rx = dir & MSP_DIR_TX; + if (disable_tx && disable_rx) { + reg_val_GCR = readl(msp->registers + MSP_GCR); + writel(reg_val_GCR | LOOPBACK_MASK, + msp->registers + MSP_GCR); + + /* Flush TX-FIFO */ + flush_fifo_tx(msp); + + /* Disable TX-channel */ + writel((readl(msp->registers + MSP_GCR) & + (~TX_ENABLE)), msp->registers + MSP_GCR); + + /* Flush RX-FIFO */ + flush_fifo_rx(msp); + + /* Disable Loopback and Receive channel */ + writel((readl(msp->registers + MSP_GCR) & + (~(RX_ENABLE | LOOPBACK_MASK))), + msp->registers + MSP_GCR); + + disable_msp_tx(msp); + disable_msp_rx(msp); + } else if (disable_tx) + disable_msp_tx(msp); + else if (disable_rx) + disable_msp_rx(msp); + + return status; +} + +int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd, int direction) +{ + u32 reg_val_GCR, enable_bit; + + if (msp->msp_state == MSP_STATE_IDLE) { + dev_err(msp->dev, "%s: ERROR: MSP is not configured!\n", + __func__); + return -EINVAL; + } + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + if (direction == SNDRV_PCM_STREAM_PLAYBACK) + enable_bit = TX_ENABLE; + else + enable_bit = RX_ENABLE; + reg_val_GCR = readl(msp->registers + MSP_GCR); + writel(reg_val_GCR | enable_bit, msp->registers + MSP_GCR); + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + if (direction == SNDRV_PCM_STREAM_PLAYBACK) + disable_msp_tx(msp); + else + disable_msp_rx(msp); + break; + default: + return -EINVAL; + break; + } + + return 0; +} + +int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir) +{ + int status = 0; + + dev_dbg(msp->dev, "%s: Enter (dir = 0x%01x).\n", __func__, dir); + + status = disable_msp(msp, dir); + if (msp->dir_busy == 0) { + /* disable sample rate and frame generators */ + msp->msp_state = MSP_STATE_IDLE; + writel((readl(msp->registers + MSP_GCR) & + (~(FRAME_GEN_ENABLE | SRG_ENABLE))), + msp->registers + MSP_GCR); + if (msp->plat_exit) + status = msp->plat_exit(); + if (status) + dev_warn(msp->dev, + "%s: WARN: ux500_msp_i2s_exit failed (%d)!\n", + __func__, status); + writel(0, msp->registers + MSP_GCR); + writel(0, msp->registers + MSP_TCF); + writel(0, msp->registers + MSP_RCF); + writel(0, msp->registers + MSP_DMACR); + writel(0, msp->registers + MSP_SRG); + writel(0, msp->registers + MSP_MCR); + writel(0, msp->registers + MSP_RCM); + writel(0, msp->registers + MSP_RCV); + writel(0, msp->registers + MSP_TCE0); + writel(0, msp->registers + MSP_TCE1); + writel(0, msp->registers + MSP_TCE2); + writel(0, msp->registers + MSP_TCE3); + writel(0, msp->registers + MSP_RCE0); + writel(0, msp->registers + MSP_RCE1); + writel(0, msp->registers + MSP_RCE2); + writel(0, msp->registers + MSP_RCE3); + } + + return status; + +} + +int ux500_msp_i2s_init_msp(struct platform_device *pdev, + struct ux500_msp **msp_p, + struct msp_i2s_platform_data *platform_data) +{ + int ret = 0; + struct resource *res = NULL; + struct i2s_controller *i2s_cont; + struct ux500_msp *msp; + + dev_dbg(&pdev->dev, "%s: Enter (name: %s, id: %d).\n", __func__, + pdev->name, platform_data->id); + + *msp_p = devm_kzalloc(&pdev->dev, sizeof(struct ux500_msp), GFP_KERNEL); + msp = *msp_p; + + msp->id = platform_data->id; + msp->dev = &pdev->dev; + msp->plat_init = platform_data->msp_i2s_init; + msp->plat_exit = platform_data->msp_i2s_exit; + msp->dma_cfg_rx = platform_data->msp_i2s_dma_rx; + msp->dma_cfg_tx = platform_data->msp_i2s_dma_tx; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "%s: ERROR: Unable to get resource!\n", + __func__); + ret = -ENOMEM; + goto err_res; + } + + msp->registers = ioremap(res->start, (res->end - res->start + 1)); + if (msp->registers == NULL) { + dev_err(&pdev->dev, "%s: ERROR: ioremap failed!\n", __func__); + ret = -ENOMEM; + goto err_res; + } + + msp->msp_state = MSP_STATE_IDLE; + msp->loopback_enable = 0; + + /* I2S-controller is allocated and added in I2S controller class. */ + i2s_cont = devm_kzalloc(&pdev->dev, sizeof(*i2s_cont), GFP_KERNEL); + if (!i2s_cont) { + dev_err(&pdev->dev, + "%s: ERROR: Failed to allocate I2S-controller!\n", + __func__); + goto err_i2s_cont; + } + i2s_cont->dev.parent = &pdev->dev; + i2s_cont->data = (void *)msp; + i2s_cont->id = (s16)msp->id; + snprintf(i2s_cont->name, sizeof(i2s_cont->name), "ux500-msp-i2s.%04x", + msp->id); + dev_dbg(&pdev->dev, "I2S device-name: '%s'\n", i2s_cont->name); + msp->i2s_cont = i2s_cont; + + return 0; + +err_i2s_cont: + iounmap(msp->registers); + +err_res: + devm_kfree(&pdev->dev, msp); + + return ret; +} + +void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev, + struct ux500_msp *msp) +{ + dev_dbg(msp->dev, "%s: Enter (id = %d).\n", __func__, msp->id); + + device_unregister(&msp->i2s_cont->dev); + devm_kfree(&pdev->dev, msp->i2s_cont); + + iounmap(msp->registers); + + devm_kfree(&pdev->dev, msp); +} + +MODULE_LICENSE("GPLv2"); diff --git a/sound/soc/ux500/ux500_msp_i2s.h b/sound/soc/ux500/ux500_msp_i2s.h new file mode 100644 index 000000000000..7f71b4a0d4bc --- /dev/null +++ b/sound/soc/ux500/ux500_msp_i2s.h @@ -0,0 +1,553 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Ola Lilja <ola.o.lilja@stericsson.com>, + * for ST-Ericsson. + * + * License terms: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + + +#ifndef UX500_MSP_I2S_H +#define UX500_MSP_I2S_H + +#include <linux/platform_device.h> + +#include <mach/board-mop500-msp.h> + +#define MSP_INPUT_FREQ_APB 48000000 + +/*** Stereo mode. Used for APB data accesses as 16 bits accesses (mono), + * 32 bits accesses (stereo). + ***/ +enum msp_stereo_mode { + MSP_MONO, + MSP_STEREO +}; + +/* Direction (Transmit/Receive mode) */ +enum msp_direction { + MSP_TX = 1, + MSP_RX = 2 +}; + +/* Transmit and receive configuration register */ +#define MSP_BIG_ENDIAN 0x00000000 +#define MSP_LITTLE_ENDIAN 0x00001000 +#define MSP_UNEXPECTED_FS_ABORT 0x00000000 +#define MSP_UNEXPECTED_FS_IGNORE 0x00008000 +#define MSP_NON_MODE_BIT_MASK 0x00009000 + +/* Global configuration register */ +#define RX_ENABLE 0x00000001 +#define RX_FIFO_ENABLE 0x00000002 +#define RX_SYNC_SRG 0x00000010 +#define RX_CLK_POL_RISING 0x00000020 +#define RX_CLK_SEL_SRG 0x00000040 +#define TX_ENABLE 0x00000100 +#define TX_FIFO_ENABLE 0x00000200 +#define TX_SYNC_SRG_PROG 0x00001800 +#define TX_SYNC_SRG_AUTO 0x00001000 +#define TX_CLK_POL_RISING 0x00002000 +#define TX_CLK_SEL_SRG 0x00004000 +#define TX_EXTRA_DELAY_ENABLE 0x00008000 +#define SRG_ENABLE 0x00010000 +#define FRAME_GEN_ENABLE 0x00100000 +#define SRG_CLK_SEL_APB 0x00000000 +#define RX_FIFO_SYNC_HI 0x00000000 +#define TX_FIFO_SYNC_HI 0x00000000 +#define SPI_CLK_MODE_NORMAL 0x00000000 + +#define MSP_FRAME_SIZE_AUTO -1 + +#define MSP_DR 0x00 +#define MSP_GCR 0x04 +#define MSP_TCF 0x08 +#define MSP_RCF 0x0c +#define MSP_SRG 0x10 +#define MSP_FLR 0x14 +#define MSP_DMACR 0x18 + +#define MSP_IMSC 0x20 +#define MSP_RIS 0x24 +#define MSP_MIS 0x28 +#define MSP_ICR 0x2c +#define MSP_MCR 0x30 +#define MSP_RCV 0x34 +#define MSP_RCM 0x38 + +#define MSP_TCE0 0x40 +#define MSP_TCE1 0x44 +#define MSP_TCE2 0x48 +#define MSP_TCE3 0x4c + +#define MSP_RCE0 0x60 +#define MSP_RCE1 0x64 +#define MSP_RCE2 0x68 +#define MSP_RCE3 0x6c +#define MSP_IODLY 0x70 + +#define MSP_ITCR 0x80 +#define MSP_ITIP 0x84 +#define MSP_ITOP 0x88 +#define MSP_TSTDR 0x8c + +#define MSP_PID0 0xfe0 +#define MSP_PID1 0xfe4 +#define MSP_PID2 0xfe8 +#define MSP_PID3 0xfec + +#define MSP_CID0 0xff0 +#define MSP_CID1 0xff4 +#define MSP_CID2 0xff8 +#define MSP_CID3 0xffc + +/* Protocol dependant parameters list */ +#define RX_ENABLE_MASK BIT(0) +#define RX_FIFO_ENABLE_MASK BIT(1) +#define RX_FSYNC_MASK BIT(2) +#define DIRECT_COMPANDING_MASK BIT(3) +#define RX_SYNC_SEL_MASK BIT(4) +#define RX_CLK_POL_MASK BIT(5) +#define RX_CLK_SEL_MASK BIT(6) +#define LOOPBACK_MASK BIT(7) +#define TX_ENABLE_MASK BIT(8) +#define TX_FIFO_ENABLE_MASK BIT(9) +#define TX_FSYNC_MASK BIT(10) +#define TX_MSP_TDR_TSR BIT(11) +#define TX_SYNC_SEL_MASK (BIT(12) | BIT(11)) +#define TX_CLK_POL_MASK BIT(13) +#define TX_CLK_SEL_MASK BIT(14) +#define TX_EXTRA_DELAY_MASK BIT(15) +#define SRG_ENABLE_MASK BIT(16) +#define SRG_CLK_POL_MASK BIT(17) +#define SRG_CLK_SEL_MASK (BIT(19) | BIT(18)) +#define FRAME_GEN_EN_MASK BIT(20) +#define SPI_CLK_MODE_MASK (BIT(22) | BIT(21)) +#define SPI_BURST_MODE_MASK BIT(23) + +#define RXEN_SHIFT 0 +#define RFFEN_SHIFT 1 +#define RFSPOL_SHIFT 2 +#define DCM_SHIFT 3 +#define RFSSEL_SHIFT 4 +#define RCKPOL_SHIFT 5 +#define RCKSEL_SHIFT 6 +#define LBM_SHIFT 7 +#define TXEN_SHIFT 8 +#define TFFEN_SHIFT 9 +#define TFSPOL_SHIFT 10 +#define TFSSEL_SHIFT 11 +#define TCKPOL_SHIFT 13 +#define TCKSEL_SHIFT 14 +#define TXDDL_SHIFT 15 +#define SGEN_SHIFT 16 +#define SCKPOL_SHIFT 17 +#define SCKSEL_SHIFT 18 +#define FGEN_SHIFT 20 +#define SPICKM_SHIFT 21 +#define TBSWAP_SHIFT 28 + +#define RCKPOL_MASK BIT(0) +#define TCKPOL_MASK BIT(0) +#define SPICKM_MASK (BIT(1) | BIT(0)) +#define MSP_RX_CLKPOL_BIT(n) ((n & RCKPOL_MASK) << RCKPOL_SHIFT) +#define MSP_TX_CLKPOL_BIT(n) ((n & TCKPOL_MASK) << TCKPOL_SHIFT) + +#define P1ELEN_SHIFT 0 +#define P1FLEN_SHIFT 3 +#define DTYP_SHIFT 10 +#define ENDN_SHIFT 12 +#define DDLY_SHIFT 13 +#define FSIG_SHIFT 15 +#define P2ELEN_SHIFT 16 +#define P2FLEN_SHIFT 19 +#define P2SM_SHIFT 26 +#define P2EN_SHIFT 27 +#define FSYNC_SHIFT 15 + +#define P1ELEN_MASK 0x00000007 +#define P2ELEN_MASK 0x00070000 +#define P1FLEN_MASK 0x00000378 +#define P2FLEN_MASK 0x03780000 +#define DDLY_MASK 0x00003000 +#define DTYP_MASK 0x00000600 +#define P2SM_MASK 0x04000000 +#define P2EN_MASK 0x08000000 +#define ENDN_MASK 0x00001000 +#define TFSPOL_MASK 0x00000400 +#define TBSWAP_MASK 0x30000000 +#define COMPANDING_MODE_MASK 0x00000c00 +#define FSYNC_MASK 0x00008000 + +#define MSP_P1_ELEM_LEN_BITS(n) (n & P1ELEN_MASK) +#define MSP_P2_ELEM_LEN_BITS(n) (((n) << P2ELEN_SHIFT) & P2ELEN_MASK) +#define MSP_P1_FRAME_LEN_BITS(n) (((n) << P1FLEN_SHIFT) & P1FLEN_MASK) +#define MSP_P2_FRAME_LEN_BITS(n) (((n) << P2FLEN_SHIFT) & P2FLEN_MASK) +#define MSP_DATA_DELAY_BITS(n) (((n) << DDLY_SHIFT) & DDLY_MASK) +#define MSP_DATA_TYPE_BITS(n) (((n) << DTYP_SHIFT) & DTYP_MASK) +#define MSP_P2_START_MODE_BIT(n) ((n << P2SM_SHIFT) & P2SM_MASK) +#define MSP_P2_ENABLE_BIT(n) ((n << P2EN_SHIFT) & P2EN_MASK) +#define MSP_SET_ENDIANNES_BIT(n) ((n << ENDN_SHIFT) & ENDN_MASK) +#define MSP_FSYNC_POL(n) ((n << TFSPOL_SHIFT) & TFSPOL_MASK) +#define MSP_DATA_WORD_SWAP(n) ((n << TBSWAP_SHIFT) & TBSWAP_MASK) +#define MSP_SET_COMPANDING_MODE(n) ((n << DTYP_SHIFT) & \ + COMPANDING_MODE_MASK) +#define MSP_SET_FSYNC_IGNORE(n) ((n << FSYNC_SHIFT) & FSYNC_MASK) + +/* Flag register */ +#define RX_BUSY BIT(0) +#define RX_FIFO_EMPTY BIT(1) +#define RX_FIFO_FULL BIT(2) +#define TX_BUSY BIT(3) +#define TX_FIFO_EMPTY BIT(4) +#define TX_FIFO_FULL BIT(5) + +#define RBUSY_SHIFT 0 +#define RFE_SHIFT 1 +#define RFU_SHIFT 2 +#define TBUSY_SHIFT 3 +#define TFE_SHIFT 4 +#define TFU_SHIFT 5 + +/* Multichannel control register */ +#define RMCEN_SHIFT 0 +#define RMCSF_SHIFT 1 +#define RCMPM_SHIFT 3 +#define TMCEN_SHIFT 5 +#define TNCSF_SHIFT 6 + +/* Sample rate generator register */ +#define SCKDIV_SHIFT 0 +#define FRWID_SHIFT 10 +#define FRPER_SHIFT 16 + +#define SCK_DIV_MASK 0x0000003FF +#define FRAME_WIDTH_BITS(n) (((n) << FRWID_SHIFT) & 0x0000FC00) +#define FRAME_PERIOD_BITS(n) (((n) << FRPER_SHIFT) & 0x1FFF0000) + +/* DMA controller register */ +#define RX_DMA_ENABLE BIT(0) +#define TX_DMA_ENABLE BIT(1) + +#define RDMAE_SHIFT 0 +#define TDMAE_SHIFT 1 + +/* Interrupt Register */ +#define RX_SERVICE_INT BIT(0) +#define RX_OVERRUN_ERROR_INT BIT(1) +#define RX_FSYNC_ERR_INT BIT(2) +#define RX_FSYNC_INT BIT(3) +#define TX_SERVICE_INT BIT(4) +#define TX_UNDERRUN_ERR_INT BIT(5) +#define TX_FSYNC_ERR_INT BIT(6) +#define TX_FSYNC_INT BIT(7) +#define ALL_INT 0x000000ff + +/* MSP test control register */ +#define MSP_ITCR_ITEN BIT(0) +#define MSP_ITCR_TESTFIFO BIT(1) + +#define RMCEN_BIT 0 +#define RMCSF_BIT 1 +#define RCMPM_BIT 3 +#define TMCEN_BIT 5 +#define TNCSF_BIT 6 + +/* Single or dual phase mode */ +enum msp_phase_mode { + MSP_SINGLE_PHASE, + MSP_DUAL_PHASE +}; + +/* Frame length */ +enum msp_frame_length { + MSP_FRAME_LEN_1 = 0, + MSP_FRAME_LEN_2 = 1, + MSP_FRAME_LEN_4 = 3, + MSP_FRAME_LEN_8 = 7, + MSP_FRAME_LEN_12 = 11, + MSP_FRAME_LEN_16 = 15, + MSP_FRAME_LEN_20 = 19, + MSP_FRAME_LEN_32 = 31, + MSP_FRAME_LEN_48 = 47, + MSP_FRAME_LEN_64 = 63 +}; + +/* Element length */ +enum msp_elem_length { + MSP_ELEM_LEN_8 = 0, + MSP_ELEM_LEN_10 = 1, + MSP_ELEM_LEN_12 = 2, + MSP_ELEM_LEN_14 = 3, + MSP_ELEM_LEN_16 = 4, + MSP_ELEM_LEN_20 = 5, + MSP_ELEM_LEN_24 = 6, + MSP_ELEM_LEN_32 = 7 +}; + +enum msp_data_xfer_width { + MSP_DATA_TRANSFER_WIDTH_BYTE, + MSP_DATA_TRANSFER_WIDTH_HALFWORD, + MSP_DATA_TRANSFER_WIDTH_WORD +}; + +enum msp_frame_sync { + MSP_FSYNC_UNIGNORE = 0, + MSP_FSYNC_IGNORE = 1, +}; + +enum msp_phase2_start_mode { + MSP_PHASE2_START_MODE_IMEDIATE, + MSP_PHASE2_START_MODE_FSYNC +}; + +enum msp_btf { + MSP_BTF_MS_BIT_FIRST = 0, + MSP_BTF_LS_BIT_FIRST = 1 +}; + +enum msp_fsync_pol { + MSP_FSYNC_POL_ACT_HI = 0, + MSP_FSYNC_POL_ACT_LO = 1 +}; + +/* Data delay (in bit clock cycles) */ +enum msp_delay { + MSP_DELAY_0 = 0, + MSP_DELAY_1 = 1, + MSP_DELAY_2 = 2, + MSP_DELAY_3 = 3 +}; + +/* Configurations of clocks (transmit, receive or sample rate generator) */ +enum msp_edge { + MSP_FALLING_EDGE = 0, + MSP_RISING_EDGE = 1, +}; + +enum msp_hws { + MSP_SWAP_NONE = 0, + MSP_SWAP_BYTE_PER_WORD = 1, + MSP_SWAP_BYTE_PER_HALF_WORD = 2, + MSP_SWAP_HALF_WORD_PER_WORD = 3 +}; + +enum msp_compress_mode { + MSP_COMPRESS_MODE_LINEAR = 0, + MSP_COMPRESS_MODE_MU_LAW = 2, + MSP_COMPRESS_MODE_A_LAW = 3 +}; + +enum msp_spi_burst_mode { + MSP_SPI_BURST_MODE_DISABLE = 0, + MSP_SPI_BURST_MODE_ENABLE = 1 +}; + +enum msp_expand_mode { + MSP_EXPAND_MODE_LINEAR = 0, + MSP_EXPAND_MODE_LINEAR_SIGNED = 1, + MSP_EXPAND_MODE_MU_LAW = 2, + MSP_EXPAND_MODE_A_LAW = 3 +}; + +#define MSP_FRAME_PERIOD_IN_MONO_MODE 256 +#define MSP_FRAME_PERIOD_IN_STEREO_MODE 32 +#define MSP_FRAME_WIDTH_IN_STEREO_MODE 16 + +enum msp_protocol { + MSP_I2S_PROTOCOL, + MSP_PCM_PROTOCOL, + MSP_PCM_COMPAND_PROTOCOL, + MSP_INVALID_PROTOCOL +}; + +/* + * No of registers to backup during + * suspend resume + */ +#define MAX_MSP_BACKUP_REGS 36 + +enum enum_i2s_controller { + MSP_0_I2S_CONTROLLER = 0, + MSP_1_I2S_CONTROLLER, + MSP_2_I2S_CONTROLLER, + MSP_3_I2S_CONTROLLER, +}; + +enum i2s_direction_t { + MSP_DIR_TX = 0x01, + MSP_DIR_RX = 0x02, +}; + +enum msp_data_size { + MSP_DATA_BITS_DEFAULT = -1, + MSP_DATA_BITS_8 = 0x00, + MSP_DATA_BITS_10, + MSP_DATA_BITS_12, + MSP_DATA_BITS_14, + MSP_DATA_BITS_16, + MSP_DATA_BITS_20, + MSP_DATA_BITS_24, + MSP_DATA_BITS_32, +}; + +enum msp_state { + MSP_STATE_IDLE = 0, + MSP_STATE_CONFIGURED = 1, + MSP_STATE_RUNNING = 2, +}; + +enum msp_rx_comparison_enable_mode { + MSP_COMPARISON_DISABLED = 0, + MSP_COMPARISON_NONEQUAL_ENABLED = 2, + MSP_COMPARISON_EQUAL_ENABLED = 3 +}; + +struct msp_multichannel_config { + bool rx_multichannel_enable; + bool tx_multichannel_enable; + enum msp_rx_comparison_enable_mode rx_comparison_enable_mode; + u8 padding; + u32 comparison_value; + u32 comparison_mask; + u32 rx_channel_0_enable; + u32 rx_channel_1_enable; + u32 rx_channel_2_enable; + u32 rx_channel_3_enable; + u32 tx_channel_0_enable; + u32 tx_channel_1_enable; + u32 tx_channel_2_enable; + u32 tx_channel_3_enable; +}; + +struct msp_protdesc { + u32 rx_phase_mode; + u32 tx_phase_mode; + u32 rx_phase2_start_mode; + u32 tx_phase2_start_mode; + u32 rx_byte_order; + u32 tx_byte_order; + u32 rx_frame_len_1; + u32 rx_frame_len_2; + u32 tx_frame_len_1; + u32 tx_frame_len_2; + u32 rx_elem_len_1; + u32 rx_elem_len_2; + u32 tx_elem_len_1; + u32 tx_elem_len_2; + u32 rx_data_delay; + u32 tx_data_delay; + u32 rx_clk_pol; + u32 tx_clk_pol; + u32 rx_fsync_pol; + u32 tx_fsync_pol; + u32 rx_half_word_swap; + u32 tx_half_word_swap; + u32 compression_mode; + u32 expansion_mode; + u32 frame_sync_ignore; + u32 frame_period; + u32 frame_width; + u32 clocks_per_frame; +}; + +struct i2s_message { + enum i2s_direction_t i2s_direction; + void *txdata; + void *rxdata; + size_t txbytes; + size_t rxbytes; + int dma_flag; + int tx_offset; + int rx_offset; + bool cyclic_dma; + dma_addr_t buf_addr; + size_t buf_len; + size_t period_len; +}; + +struct i2s_controller { + struct module *owner; + unsigned int id; + unsigned int class; + const struct i2s_algorithm *algo; /* the algorithm to access the bus */ + void *data; + struct mutex bus_lock; + struct device dev; /* the controller device */ + char name[48]; +}; + +struct ux500_msp_config { + unsigned int f_inputclk; + unsigned int rx_clk_sel; + unsigned int tx_clk_sel; + unsigned int srg_clk_sel; + unsigned int rx_fsync_pol; + unsigned int tx_fsync_pol; + unsigned int rx_fsync_sel; + unsigned int tx_fsync_sel; + unsigned int rx_fifo_config; + unsigned int tx_fifo_config; + unsigned int spi_clk_mode; + unsigned int spi_burst_mode; + unsigned int loopback_enable; + unsigned int tx_data_enable; + unsigned int default_protdesc; + struct msp_protdesc protdesc; + int multichannel_configured; + struct msp_multichannel_config multichannel_config; + unsigned int direction; + unsigned int protocol; + unsigned int frame_freq; + unsigned int frame_size; + enum msp_data_size data_size; + unsigned int def_elem_len; + unsigned int iodelay; + void (*handler) (void *data); + void *tx_callback_data; + void *rx_callback_data; +}; + +struct ux500_msp { + enum enum_i2s_controller id; + void __iomem *registers; + struct device *dev; + struct i2s_controller *i2s_cont; + struct stedma40_chan_cfg *dma_cfg_rx; + struct stedma40_chan_cfg *dma_cfg_tx; + struct dma_chan *tx_pipeid; + struct dma_chan *rx_pipeid; + enum msp_state msp_state; + int (*transfer) (struct ux500_msp *msp, struct i2s_message *message); + int (*plat_init) (void); + int (*plat_exit) (void); + struct timer_list notify_timer; + int def_elem_len; + unsigned int dir_busy; + int loopback_enable; + u32 backup_regs[MAX_MSP_BACKUP_REGS]; + unsigned int f_bitclk; +}; + +struct ux500_msp_dma_params { + unsigned int data_size; + struct stedma40_chan_cfg *dma_cfg; +}; + +int ux500_msp_i2s_init_msp(struct platform_device *pdev, + struct ux500_msp **msp_p, + struct msp_i2s_platform_data *platform_data); +void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev, + struct ux500_msp *msp); +int ux500_msp_i2s_open(struct ux500_msp *msp, struct ux500_msp_config *config); +int ux500_msp_i2s_close(struct ux500_msp *msp, + unsigned int dir); +int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd, + int direction); + +#endif |