summaryrefslogtreecommitdiffstats
path: root/sound
diff options
context:
space:
mode:
authorNicolas Boichat <nicolas@boichat.ch>2008-07-21 22:18:01 +0800
committerTakashi Iwai <tiwai@suse.de>2008-07-27 10:22:27 +0200
commit536319afd1f25383009c0c88f6fb00104f49c178 (patch)
tree82790c97fccf0396a84b52f447b9dfd0fa3292b0 /sound
parentb15ebe2616289da258f85b3ff142fca237ef9f59 (diff)
downloadlinux-536319afd1f25383009c0c88f6fb00104f49c178.tar.bz2
ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel).
Currently, even if you pass model=intel-mac-v3 as a module parameter to snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still try to auto-detect the model type. This is a problem on my MacBook Pro 1st generation, which needs intel-mac-v3, but sometimes incorrectly reports 0x00000100 as subsystem id, which causes the switch in patch_stac922x to select intel-mac-v4. To fix this, I added a new model called intel-mac-auto, so in case no module parameter is passed, and an Intel Mac board is detected, the model will be automatically detected, while no detection will be done if the model is forced to intel-mac-v3. This problem has been around for quite a while, and I used to fix it by moving the case statement for 0x00000100 in patch_stac922x so that intel-mac-v3 is chosen. Another way to fix the problem would be to check if a module parameter was set directly in patch_stac922x, using something like this: if (spec->board_config == STAC_INTEL_MAC_V3 && !codec->bus->modelname) { But I think it is less elegant (if you prefer that way, I can prepare a patch). Signed-off-by: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound')
-rw-r--r--sound/pci/hda/patch_sigmatel.c14
1 files changed, 11 insertions, 3 deletions
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 08cb77f51880..7fdafcb0015d 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -94,6 +94,9 @@ enum {
STAC_INTEL_MAC_V3,
STAC_INTEL_MAC_V4,
STAC_INTEL_MAC_V5,
+ STAC_INTEL_MAC_AUTO, /* This model is selected if no module parameter
+ * is given, one of the above models will be
+ * chosen according to the subsystem id. */
/* for backward compatibility */
STAC_MACMINI,
STAC_MACBOOK,
@@ -1483,6 +1486,7 @@ static unsigned int *stac922x_brd_tbl[STAC_922X_MODELS] = {
[STAC_INTEL_MAC_V3] = intel_mac_v3_pin_configs,
[STAC_INTEL_MAC_V4] = intel_mac_v4_pin_configs,
[STAC_INTEL_MAC_V5] = intel_mac_v5_pin_configs,
+ [STAC_INTEL_MAC_AUTO] = intel_mac_v3_pin_configs,
/* for backward compatibility */
[STAC_MACMINI] = intel_mac_v3_pin_configs,
[STAC_MACBOOK] = intel_mac_v5_pin_configs,
@@ -1505,6 +1509,7 @@ static const char *stac922x_models[STAC_922X_MODELS] = {
[STAC_INTEL_MAC_V3] = "intel-mac-v3",
[STAC_INTEL_MAC_V4] = "intel-mac-v4",
[STAC_INTEL_MAC_V5] = "intel-mac-v5",
+ [STAC_INTEL_MAC_AUTO] = "intel-mac-auto",
/* for backward compatibility */
[STAC_MACMINI] = "macmini",
[STAC_MACBOOK] = "macbook",
@@ -1576,9 +1581,9 @@ static struct snd_pci_quirk stac922x_cfg_tbl[] = {
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x0707,
"Intel D945P", STAC_D945GTP5),
/* other systems */
- /* Apple Mac Mini (early 2006) */
+ /* Apple Intel Mac (Mac Mini, MacBook, MacBook Pro...) */
SND_PCI_QUIRK(0x8384, 0x7680,
- "Mac Mini", STAC_INTEL_MAC_V3),
+ "Mac", STAC_INTEL_MAC_AUTO),
/* Dell systems */
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01a7,
"unknown Dell", STAC_922X_DELL_D81),
@@ -3725,7 +3730,7 @@ static int patch_stac922x(struct hda_codec *codec)
spec->board_config = snd_hda_check_board_config(codec, STAC_922X_MODELS,
stac922x_models,
stac922x_cfg_tbl);
- if (spec->board_config == STAC_INTEL_MAC_V3) {
+ if (spec->board_config == STAC_INTEL_MAC_AUTO) {
spec->gpio_mask = spec->gpio_dir = 0x03;
spec->gpio_data = 0x03;
/* Intel Macs have all same PCI SSID, so we need to check
@@ -3757,6 +3762,9 @@ static int patch_stac922x(struct hda_codec *codec)
case 0x106b2200:
spec->board_config = STAC_INTEL_MAC_V5;
break;
+ default:
+ spec->board_config = STAC_INTEL_MAC_V3;
+ break;
}
}