diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-24 10:33:08 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-10-24 10:33:08 -0700 |
commit | e731f3146ff3bba5424b40140e1a7e6f92e94964 (patch) | |
tree | c926040385de8b020763f0d2338e0ccbf42bac45 /sound | |
parent | 1f70935f637dfba226bf77182c2629fde61ed06e (diff) | |
parent | accdab6d9e8f715068d91ee0ca0424a6999f0d19 (diff) | |
download | linux-e731f3146ff3bba5424b40140e1a7e6f92e94964.tar.bz2 |
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
Diffstat (limited to 'sound')
-rw-r--r-- | sound/soc/samsung/Kconfig | 2 | ||||
-rw-r--r-- | sound/soc/samsung/s3c2412-i2s.c | 7 | ||||
-rw-r--r-- | sound/soc/samsung/s3c24xx-i2s.c | 7 |
3 files changed, 1 insertions, 15 deletions
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index 1431be4ed054..a2221ebb1b6a 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig SND_SOC_SAMSUNG tristate "ASoC support for Samsung" - depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST depends on COMMON_CLK select SND_SOC_GENERIC_DMAENGINE_PCM help diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c index edfa9d11d2e5..81f416ac457e 100644 --- a/sound/soc/samsung/s3c2412-i2s.c +++ b/sound/soc/samsung/s3c2412-i2s.c @@ -19,9 +19,6 @@ #include <sound/soc.h> #include <sound/pcm_params.h> -#include <mach/gpio-samsung.h> -#include <plat/gpio-cfg.h> - #include "dma.h" #include "regs-i2s-v2.h" #include "s3c2412-i2s.h" @@ -70,10 +67,6 @@ static int s3c2412_i2s_probe(struct snd_soc_dai *dai) if (ret) goto err; - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - return 0; err: diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c index 60bfaed5f7a6..50c08008aacb 100644 --- a/sound/soc/samsung/s3c24xx-i2s.c +++ b/sound/soc/samsung/s3c24xx-i2s.c @@ -18,10 +18,7 @@ #include <sound/soc.h> #include <sound/pcm_params.h> -#include <mach/gpio-samsung.h> -#include <plat/gpio-cfg.h> #include "regs-iis.h" - #include "dma.h" #include "s3c24xx-i2s.h" @@ -348,10 +345,6 @@ static int s3c24xx_i2s_probe(struct snd_soc_dai *dai) if (ret) return ret; - /* Configure the I2S pins (GPE0...GPE4) in correct mode */ - s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2), - S3C_GPIO_PULL_NONE); - writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON); s3c24xx_snd_txctrl(0); |