summaryrefslogtreecommitdiffstats
path: root/sound
diff options
context:
space:
mode:
authorConnor McAdams <conmanx360@gmail.com>2020-12-10 11:06:54 -0500
committerTakashi Iwai <tiwai@suse.de>2020-12-11 09:52:44 +0100
commitaedeb64211f0d9ae2f71a0a132e402c26b358cdc (patch)
tree6a207089c79652fca7bf2d14dafdd4d35fbba487 /sound
parent4a6d3b4e7ae77352fa4bd602ff0c44d8450705aa (diff)
downloadlinux-aedeb64211f0d9ae2f71a0a132e402c26b358cdc.tar.bz2
ALSA: hda/ca0132 - Add stream port remapping function.
Add function for remapping a ChipIO stream's ports. Also include some documentation as to how this works. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Link: https://lore.kernel.org/r/20201210160658.461739-3-conmanx360@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound')
-rw-r--r--sound/pci/hda/patch_ca0132.c208
1 files changed, 156 insertions, 52 deletions
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 5ac3227fb579..200cc0f8ac0e 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -788,6 +788,40 @@ static const struct ae5_filter_set ae5_filter_presets[] = {
}
};
+/*
+ * Data structures for storing audio router remapping data. These are used to
+ * remap a currently active streams ports.
+ */
+struct chipio_stream_remap_data {
+ unsigned int stream_id;
+ unsigned int count;
+
+ unsigned int offset[16];
+ unsigned int value[16];
+};
+
+static const struct chipio_stream_remap_data stream_remap_data[] = {
+ { .stream_id = 0x14,
+ .count = 0x04,
+ .offset = { 0x00, 0x04, 0x08, 0x0c },
+ .value = { 0x0001f8c0, 0x0001f9c1, 0x0001fac6, 0x0001fbc7 },
+ },
+ { .stream_id = 0x0c,
+ .count = 0x0c,
+ .offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c,
+ 0x20, 0x24, 0x28, 0x2c },
+ .value = { 0x0001e0c0, 0x0001e1c1, 0x0001e4c2, 0x0001e5c3,
+ 0x0001e2c4, 0x0001e3c5, 0x0001e8c6, 0x0001e9c7,
+ 0x0001ecc8, 0x0001edc9, 0x0001eaca, 0x0001ebcb },
+ },
+ { .stream_id = 0x0c,
+ .count = 0x08,
+ .offset = { 0x08, 0x0c, 0x10, 0x14, 0x20, 0x24, 0x28, 0x2c },
+ .value = { 0x000140c2, 0x000141c3, 0x000150c4, 0x000151c5,
+ 0x000142c8, 0x000143c9, 0x000152ca, 0x000153cb },
+ }
+};
+
enum hda_cmd_vendor_io {
/* for DspIO node */
VENDOR_DSPIO_SCP_WRITE_DATA_LOW = 0x000,
@@ -7424,6 +7458,104 @@ static void ca0132_refresh_widget_caps(struct hda_codec *codec)
}
/*
+ * The region of ChipIO memory from 0x190000-0x1903fc is a sort of 'audio
+ * router', where each entry represents a 48khz audio channel, with a format
+ * of an 8-bit destination, an 8-bit source, and an unknown 2-bit number
+ * value. The 2-bit number value is seemingly 0 if inactive, 1 if active,
+ * and 3 if it's using Sample Rate Converter ports.
+ * An example is:
+ * 0x0001f8c0
+ * In this case, f8 is the destination, and c0 is the source. The number value
+ * is 1.
+ * This region of memory is normally managed internally by the 8051, where
+ * the region of exram memory from 0x1477-0x1575 has each byte represent an
+ * entry within the 0x190000 range, and when a range of entries is in use, the
+ * ending value is overwritten with 0xff.
+ * 0x1578 in exram is a table of 0x25 entries, corresponding to the ChipIO
+ * streamID's, where each entry is a starting 0x190000 port offset.
+ * 0x159d in exram is the same as 0x1578, except it contains the ending port
+ * offset for the corresponding streamID.
+ *
+ * On certain cards, such as the SBZ/ZxR/AE7, these are originally setup by
+ * the 8051, then manually overwritten to remap the ports to work with the
+ * new DACs.
+ *
+ * Currently known portID's:
+ * 0x00-0x1f: HDA audio stream input/output ports.
+ * 0x80-0xbf: Sample rate converter input/outputs. Only valid ports seem to
+ * have the lower-nibble set to 0x1, 0x2, and 0x9.
+ * 0xc0-0xdf: DSP DMA input/output ports. Dynamically assigned.
+ * 0xe0-0xff: DAC/ADC audio input/output ports.
+ *
+ * Currently known streamID's:
+ * 0x03: Mic1 ADC to DSP.
+ * 0x04: Mic2 ADC to DSP.
+ * 0x05: HDA node 0x02 audio stream to DSP.
+ * 0x0f: DSP Mic exit to HDA node 0x07.
+ * 0x0c: DSP processed audio to DACs.
+ * 0x14: DAC0, front L/R.
+ *
+ * It is possible to route the HDA audio streams directly to the DAC and
+ * bypass the DSP entirely, with the only downside being that since the DSP
+ * does volume control, the only volume control you'll get is through PCM on
+ * the PC side, in the same way volume is handled for optical out. This may be
+ * useful for debugging.
+ */
+static void chipio_remap_stream(struct hda_codec *codec,
+ const struct chipio_stream_remap_data *remap_data)
+{
+ unsigned int i, stream_offset, tmp;
+
+ /* Get the starting port for the stream to be remapped. */
+ tmp = 0x1578 + remap_data->stream_id;
+ for (i = 0; i < 2; i++) {
+ snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
+ VENDOR_CHIPIO_8051_ADDRESS_LOW + i,
+ ((tmp >> (i * 8)) & 0xff));
+ }
+
+ stream_offset = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0,
+ VENDOR_CHIPIO_8051_DATA_READ, 0);
+
+ /*
+ * Check if the stream's port value is 0xff, because the 8051 may not
+ * have gotten around to setting up the stream yet. Wait until it's
+ * setup to remap it's ports.
+ */
+ if (stream_offset == 0xff) {
+ for (i = 0; i < 5; i++) {
+ msleep(25);
+
+ stream_offset = snd_hda_codec_read(codec,
+ WIDGET_CHIP_CTRL, 0,
+ VENDOR_CHIPIO_8051_DATA_READ, 0);
+
+ if (stream_offset != 0xff)
+ break;
+ }
+ }
+
+ if (stream_offset == 0xff) {
+ codec_info(codec, "%s: Stream 0x%02x ports aren't allocated, remap failed!\n",
+ __func__, remap_data->stream_id);
+ return;
+ }
+
+ /* Offset isn't in bytes, its in 32-bit words, so multiply it by 4. */
+ stream_offset *= 0x04;
+ stream_offset += 0x190000;
+
+ for (i = 0; i < remap_data->count; i++) {
+ chipio_write_no_mutex(codec,
+ stream_offset + remap_data->offset[i],
+ remap_data->value[i]);
+ }
+
+ /* Update stream map configuration. */
+ chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
+}
+
+/*
* Default speaker tuning values setup for alternative codecs.
*/
static const unsigned int sbz_default_delay_values[] = {
@@ -7570,46 +7702,35 @@ static void sbz_connect_streams(struct hda_codec *codec)
*/
static void sbz_chipio_startup_data(struct hda_codec *codec)
{
+ const struct chipio_stream_remap_data *dsp_out_remap_data;
struct ca0132_spec *spec = codec->spec;
mutex_lock(&spec->chipio_mutex);
codec_dbg(codec, "Startup Data entered, mutex locked and loaded.\n");
- /* These control audio output */
- chipio_write_no_mutex(codec, 0x190060, 0x0001f8c0);
- chipio_write_no_mutex(codec, 0x190064, 0x0001f9c1);
- chipio_write_no_mutex(codec, 0x190068, 0x0001fac6);
- chipio_write_no_mutex(codec, 0x19006c, 0x0001fbc7);
- /* Signal to update I think */
- chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
+ /* Remap DAC0's output ports. */
+ chipio_remap_stream(codec, &stream_remap_data[0]);
- chipio_set_stream_channels(codec, 0x0C, 6);
- chipio_set_stream_control(codec, 0x0C, 1);
- /* No clue what these control */
- if (ca0132_quirk(spec) == QUIRK_SBZ) {
- chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0);
- chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1);
- chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2);
- chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3);
- chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4);
- chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5);
- chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6);
- chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7);
- chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8);
- chipio_write_no_mutex(codec, 0x190054, 0x0001edc9);
- chipio_write_no_mutex(codec, 0x190058, 0x0001eaca);
- chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb);
- } else if (ca0132_quirk(spec) == QUIRK_ZXR) {
- chipio_write_no_mutex(codec, 0x190038, 0x000140c2);
- chipio_write_no_mutex(codec, 0x19003c, 0x000141c3);
- chipio_write_no_mutex(codec, 0x190040, 0x000150c4);
- chipio_write_no_mutex(codec, 0x190044, 0x000151c5);
- chipio_write_no_mutex(codec, 0x190050, 0x000142c8);
- chipio_write_no_mutex(codec, 0x190054, 0x000143c9);
- chipio_write_no_mutex(codec, 0x190058, 0x000152ca);
- chipio_write_no_mutex(codec, 0x19005c, 0x000153cb);
+ /* Remap DSP audio output stream ports. */
+ switch (ca0132_quirk(spec)) {
+ case QUIRK_SBZ:
+ dsp_out_remap_data = &stream_remap_data[1];
+ break;
+
+ case QUIRK_ZXR:
+ dsp_out_remap_data = &stream_remap_data[2];
+ break;
+
+ default:
+ dsp_out_remap_data = NULL;
+ break;
}
- chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
+
+ chipio_set_stream_channels(codec, 0x0c, 6);
+ chipio_set_stream_control(codec, 0x0c, 1);
+
+ if (dsp_out_remap_data)
+ chipio_remap_stream(codec, dsp_out_remap_data);
codec_dbg(codec, "Startup Data exited, mutex released.\n");
mutex_unlock(&spec->chipio_mutex);
@@ -7842,34 +7963,17 @@ static void ae5_post_dsp_startup_data(struct hda_codec *codec)
mutex_unlock(&spec->chipio_mutex);
}
-static const unsigned int ae7_port_set_data[] = {
- 0x0001e0c0, 0x0001e1c1, 0x0001e4c2, 0x0001e5c3, 0x0001e2c4, 0x0001e3c5,
- 0x0001e8c6, 0x0001e9c7, 0x0001ecc8, 0x0001edc9, 0x0001eaca, 0x0001ebcb
-};
-
static void ae7_post_dsp_setup_ports(struct hda_codec *codec)
{
struct ca0132_spec *spec = codec->spec;
- unsigned int i, count, addr;
mutex_lock(&spec->chipio_mutex);
chipio_set_stream_channels(codec, 0x0c, 6);
chipio_set_stream_control(codec, 0x0c, 1);
- count = ARRAY_SIZE(ae7_port_set_data);
- addr = 0x190030;
- for (i = 0; i < count; i++) {
- chipio_write_no_mutex(codec, addr, ae7_port_set_data[i]);
-
- /* Addresses are incremented by 4-bytes. */
- addr += 0x04;
- }
-
- /*
- * Port setting always ends with a write of 0x1 to address 0x19042c.
- */
- chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
+ /* Seems to share the same port remapping as the SBZ. */
+ chipio_remap_stream(codec, &stream_remap_data[1]);
ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00);
ca0113_mmio_command_set(codec, 0x48, 0x0d, 0x40);