ALSA: usb: refine delay information with USB frame counter

Existing code only updates the audio delay when URBs were
submitted/retired. This can introduce an uncertainty of 8ms
on the number of samples played out with the default settings,
and a lot more when URBs convey more packets to reduce the
interrupt rate and power consumption.

This patch relies on the USB frame counter to reduce the
uncertainty to less than 2ms worst-case. The delay information
essentially becomes independent of the URB size and number of
packets. This should help applications like PulseAudio which
require accurate audio timing. Clemens Ladisch reported
a decrease of mplayer's A-V difference from nrpacks down to at
most 1ms.

Thanks to Clemens for also pointing out that the implementation
of frame counters varies between different HCDs. Only the
8 lowest-bits are used to estimate the delay.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[clemens: changed debug code]
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 3 insertions, 0 deletions

diff --git a/sound/usb/pcm.h b/sound/usb/pcm.h
index ed3e283f618d..df7a003682ad 100644
--- a/sound/usb/pcm.h
+++ b/sound/usb/pcm.h
@@ -1,6 +1,9 @@
 #ifndef __USBAUDIO_PCM_H
 #define __USBAUDIO_PCM_H
 
+snd_pcm_uframes_t snd_usb_pcm_delay(struct snd_usb_substream *subs,
+				    unsigned int rate);
+
 void snd_usb_set_pcm_ops(struct snd_pcm *pcm, int stream);
 
 int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface,