Merge tag 'sound-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "In this batch, you can find lots of cleanups through the whole
  subsystem, as our good New Year's resolution.  Lots of LOCs and
  commits are about LINE6 driver that was promoted finally from staging
  tree, and as usual, there've been widely spread ASoC changes.

  Here some highlights:

  ALSA core changes
   - Embedding struct device into ALSA core structures
   - sequencer core cleanups / fixes
   - PCM msbits constraints cleanups / fixes
   - New SNDRV_PCM_TRIGGER_DRAIN command
   - PCM kerneldoc fixes, header cleanups
   - PCM code cleanups using more standard codes
   - Control notification ID fixes

  Driver cleanups
   - Cleanups of PCI PM callbacks
   - Timer helper usages cleanups
   - Simplification (e.g. argument reduction) of many driver codes

  HD-audio
   - Hotkey and LED support on HP laptops with Realtek codecs
   - Dock station support on HP laptops
   - Toshiba Satellite S50D fixup
   - Enhanced wallclock timestamp handling for HD-audio
   - Componentization to simplify the linkage between i915 and hd-audio
     drivers for Intel HDMI/DP

  USB-audio
   - Akai MPC Element support
   - Enhanced timestamp handling

  ASoC
   - Lots of refactoringin ASoC core, moving drivers to more data driven
     initialization and rationalizing a lot of DAPM usage
   - Much improved handling of CDCLK clocks on Samsung I2S controllers
   - Lots of driver specific cleanups and feature improvements
   - CODEC support for TI PCM514x and TLV320AIC3104 devices
   - Board support for Tegra systems with Realtek RT5677
   - New driver for Maxim max98357a
   - More enhancements / fixes for Intel SST driver

  Others
   - Promotion of LINE6 driver from staging along with lots of rewrites
     and cleanups
   - DT support for old non-ASoC atmel driver
   - oxygen cleanups, XIO2001 init, Studio Evolution SE6x support
   - Emu8000 DRAM size detection fix on ISA(!!) AWE64 boards
   - A few more ak411x fixes for ice1724 boards"

* tag 'sound-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (542 commits)
  ALSA: line6: toneport: Use explicit type for firmware version
  ALSA: line6: Use explicit type for serial number
  ALSA: line6: Return EIO if read/write not successful
  ALSA: line6: Return error if device not responding
  ALSA: line6: Add delay before reading status
  ASoC: Intel: Clean data after SST fw fetch
  ALSA: hda - Add docking station support for another HP machine
  ALSA: control: fix failure to return new numerical ID in 'replace' event data
  ALSA: usb: update trigger timestamp on first non-zero URB submitted
  ALSA: hda: read trigger_timestamp immediately after starting DMA
  ALSA: pcm: allow for trigger_tstamp snapshot in .trigger
  ALSA: pcm: don't override timestamp unconditionally
  ALSA: off by one bug in snd_riptide_joystick_probe()
  ASoC: rt5670: Set use_single_rw flag for regmap
  ASoC: rt286: Add rt288 codec support
  ASoC: max98357a: Fix build in !CONFIG_OF case
  ASoC: Intel: fix platform_no_drv_owner.cocci warnings
  ARM: dts: Switch Odroid X2/U2 to simple-audio-card
  ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update
  ALSA: control: fix failure to return numerical ID in 'add' event
  ...

1 files changed, 666 insertions, 0 deletions

diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
new file mode 100644
index 000000000000..99b63a7902f3
--- /dev/null
+++ b/sound/usb/line6/driver.c
@@ -0,0 +1,666 @@
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "midi.h"
+#include "playback.h"
+
+#define DRIVER_AUTHOR  "Markus Grabner <grabner@icg.tugraz.at>"
+#define DRIVER_DESC    "Line 6 USB Driver"
+
+/*
+	This is Line 6's MIDI manufacturer ID.
+*/
+const unsigned char line6_midi_id[] = {
+	0x00, 0x01, 0x0c
+};
+EXPORT_SYMBOL_GPL(line6_midi_id);
+
+/*
+	Code to request version of POD, Variax interface
+	(and maybe other devices).
+*/
+static const char line6_request_version[] = {
+	0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7
+};
+
+/*
+	 Class for asynchronous messages.
+*/
+struct message {
+	struct usb_line6 *line6;
+	const char *buffer;
+	int size;
+	int done;
+};
+
+/*
+	Forward declarations.
+*/
+static void line6_data_received(struct urb *urb);
+static int line6_send_raw_message_async_part(struct message *msg,
+					     struct urb *urb);
+
+/*
+	Start to listen on endpoint.
+*/
+static int line6_start_listen(struct usb_line6 *line6)
+{
+	int err;
+
+	usb_fill_int_urb(line6->urb_listen, line6->usbdev,
+		usb_rcvintpipe(line6->usbdev, line6->properties->ep_ctrl_r),
+		line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
+		line6_data_received, line6, line6->interval);
+	line6->urb_listen->actual_length = 0;
+	err = usb_submit_urb(line6->urb_listen, GFP_ATOMIC);
+	return err;
+}
+
+/*
+	Stop listening on endpoint.
+*/
+static void line6_stop_listen(struct usb_line6 *line6)
+{
+	usb_kill_urb(line6->urb_listen);
+}
+
+/*
+	Send raw message in pieces of wMaxPacketSize bytes.
+*/
+static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
+				  int size)
+{
+	int i, done = 0;
+
+	for (i = 0; i < size; i += line6->max_packet_size) {
+		int partial;
+		const char *frag_buf = buffer + i;
+		int frag_size = min(line6->max_packet_size, size - i);
+		int retval;
+
+		retval = usb_interrupt_msg(line6->usbdev,
+					usb_sndintpipe(line6->usbdev,
+						line6->properties->ep_ctrl_w),
+					(char *)frag_buf, frag_size,
+					&partial, LINE6_TIMEOUT * HZ);
+
+		if (retval) {
+			dev_err(line6->ifcdev,
+				"usb_interrupt_msg failed (%d)\n", retval);
+			break;
+		}
+
+		done += frag_size;
+	}
+
+	return done;
+}
+
+/*
+	Notification of completion of asynchronous request transmission.
+*/
+static void line6_async_request_sent(struct urb *urb)
+{
+	struct message *msg = (struct message *)urb->context;
+
+	if (msg->done >= msg->size) {
+		usb_free_urb(urb);
+		kfree(msg);
+	} else
+		line6_send_raw_message_async_part(msg, urb);
+}
+
+/*
+	Asynchronously send part of a raw message.
+*/
+static int line6_send_raw_message_async_part(struct message *msg,
+					     struct urb *urb)
+{
+	int retval;
+	struct usb_line6 *line6 = msg->line6;
+	int done = msg->done;
+	int bytes = min(msg->size - done, line6->max_packet_size);
+
+	usb_fill_int_urb(urb, line6->usbdev,
+		usb_sndintpipe(line6->usbdev, line6->properties->ep_ctrl_w),
+		(char *)msg->buffer + done, bytes,
+		line6_async_request_sent, msg, line6->interval);
+
+	msg->done += bytes;
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+
+	if (retval < 0) {
+		dev_err(line6->ifcdev, "%s: usb_submit_urb failed (%d)\n",
+			__func__, retval);
+		usb_free_urb(urb);
+		kfree(msg);
+		return retval;
+	}
+
+	return 0;
+}
+
+/*
+	Setup and start timer.
+*/
+void line6_start_timer(struct timer_list *timer, unsigned long msecs,
+		       void (*function)(unsigned long), unsigned long data)
+{
+	setup_timer(timer, function, data);
+	mod_timer(timer, jiffies + msecs_to_jiffies(msecs));
+}
+EXPORT_SYMBOL_GPL(line6_start_timer);
+
+/*
+	Asynchronously send raw message.
+*/
+int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
+				 int size)
+{
+	struct message *msg;
+	struct urb *urb;
+
+	/* create message: */
+	msg = kmalloc(sizeof(struct message), GFP_ATOMIC);
+	if (msg == NULL)
+		return -ENOMEM;
+
+	/* create URB: */
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+
+	if (urb == NULL) {
+		kfree(msg);
+		return -ENOMEM;
+	}
+
+	/* set message data: */
+	msg->line6 = line6;
+	msg->buffer = buffer;
+	msg->size = size;
+	msg->done = 0;
+
+	/* start sending: */
+	return line6_send_raw_message_async_part(msg, urb);
+}
+EXPORT_SYMBOL_GPL(line6_send_raw_message_async);
+
+/*
+	Send asynchronous device version request.
+*/
+int line6_version_request_async(struct usb_line6 *line6)
+{
+	char *buffer;
+	int retval;
+
+	buffer = kmemdup(line6_request_version,
+			sizeof(line6_request_version), GFP_ATOMIC);
+	if (buffer == NULL)
+		return -ENOMEM;
+
+	retval = line6_send_raw_message_async(line6, buffer,
+					      sizeof(line6_request_version));
+	kfree(buffer);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(line6_version_request_async);
+
+/*
+	Send sysex message in pieces of wMaxPacketSize bytes.
+*/
+int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
+			     int size)
+{
+	return line6_send_raw_message(line6, buffer,
+				      size + SYSEX_EXTRA_SIZE) -
+	    SYSEX_EXTRA_SIZE;
+}
+EXPORT_SYMBOL_GPL(line6_send_sysex_message);
+
+/*
+	Allocate buffer for sysex message and prepare header.
+	@param code sysex message code
+	@param size number of bytes between code and sysex end
+*/
+char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2,
+			       int size)
+{
+	char *buffer = kmalloc(size + SYSEX_EXTRA_SIZE, GFP_ATOMIC);
+
+	if (!buffer)
+		return NULL;
+
+	buffer[0] = LINE6_SYSEX_BEGIN;
+	memcpy(buffer + 1, line6_midi_id, sizeof(line6_midi_id));
+	buffer[sizeof(line6_midi_id) + 1] = code1;
+	buffer[sizeof(line6_midi_id) + 2] = code2;
+	buffer[sizeof(line6_midi_id) + 3 + size] = LINE6_SYSEX_END;
+	return buffer;
+}
+EXPORT_SYMBOL_GPL(line6_alloc_sysex_buffer);
+
+/*
+	Notification of data received from the Line 6 device.
+*/
+static void line6_data_received(struct urb *urb)
+{
+	struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
+	struct midi_buffer *mb = &line6->line6midi->midibuf_in;
+	int done;
+
+	if (urb->status == -ESHUTDOWN)
+		return;
+
+	done =
+	    line6_midibuf_write(mb, urb->transfer_buffer, urb->actual_length);
+
+	if (done < urb->actual_length) {
+		line6_midibuf_ignore(mb, done);
+		dev_dbg(line6->ifcdev, "%d %d buffer overflow - message skipped\n",
+			done, urb->actual_length);
+	}
+
+	for (;;) {
+		done =
+		    line6_midibuf_read(mb, line6->buffer_message,
+				       LINE6_MESSAGE_MAXLEN);
+
+		if (done == 0)
+			break;
+
+		line6->message_length = done;
+		line6_midi_receive(line6, line6->buffer_message, done);
+
+		if (line6->process_message)
+			line6->process_message(line6);
+	}
+
+	line6_start_listen(line6);
+}
+
+#define LINE6_READ_WRITE_STATUS_DELAY 2  /* milliseconds */
+#define LINE6_READ_WRITE_MAX_RETRIES 50
+
+/*
+	Read data from device.
+*/
+int line6_read_data(struct usb_line6 *line6, int address, void *data,
+		    size_t datalen)
+{
+	struct usb_device *usbdev = line6->usbdev;
+	int ret;
+	unsigned char len;
+	unsigned count;
+
+	/* query the serial number: */
+	ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
+			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+			      (datalen << 8) | 0x21, address,
+			      NULL, 0, LINE6_TIMEOUT * HZ);
+
+	if (ret < 0) {
+		dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
+		return ret;
+	}
+
+	/* Wait for data length. We'll get 0xff until length arrives. */
+	for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
+		mdelay(LINE6_READ_WRITE_STATUS_DELAY);
+
+		ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
+				      USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+				      USB_DIR_IN,
+				      0x0012, 0x0000, &len, 1,
+				      LINE6_TIMEOUT * HZ);
+		if (ret < 0) {
+			dev_err(line6->ifcdev,
+				"receive length failed (error %d)\n", ret);
+			return ret;
+		}
+
+		if (len != 0xff)
+			break;
+	}
+
+	if (len == 0xff) {
+		dev_err(line6->ifcdev, "read failed after %d retries\n",
+			count);
+		return -EIO;
+	} else if (len != datalen) {
+		/* should be equal or something went wrong */
+		dev_err(line6->ifcdev,
+			"length mismatch (expected %d, got %d)\n",
+			(int)datalen, (int)len);
+		return -EIO;
+	}
+
+	/* receive the result: */
+	ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
+			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			      0x0013, 0x0000, data, datalen,
+			      LINE6_TIMEOUT * HZ);
+
+	if (ret < 0) {
+		dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_read_data);
+
+/*
+	Write data to device.
+*/
+int line6_write_data(struct usb_line6 *line6, int address, void *data,
+		     size_t datalen)
+{
+	struct usb_device *usbdev = line6->usbdev;
+	int ret;
+	unsigned char status;
+	int count;
+
+	ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
+			      USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+			      0x0022, address, data, datalen,
+			      LINE6_TIMEOUT * HZ);
+
+	if (ret < 0) {
+		dev_err(line6->ifcdev,
+			"write request failed (error %d)\n", ret);
+		return ret;
+	}
+
+	for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
+		mdelay(LINE6_READ_WRITE_STATUS_DELAY);
+
+		ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
+				      0x67,
+				      USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+				      USB_DIR_IN,
+				      0x0012, 0x0000,
+				      &status, 1, LINE6_TIMEOUT * HZ);
+
+		if (ret < 0) {
+			dev_err(line6->ifcdev,
+				"receiving status failed (error %d)\n", ret);
+			return ret;
+		}
+
+		if (status != 0xff)
+			break;
+	}
+
+	if (status == 0xff) {
+		dev_err(line6->ifcdev, "write failed after %d retries\n",
+			count);
+		return -EIO;
+	} else if (status != 0) {
+		dev_err(line6->ifcdev, "write failed (error %d)\n", ret);
+		return -EIO;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_write_data);
+
+/*
+	Read Line 6 device serial number.
+	(POD, TonePort, GuitarPort)
+*/
+int line6_read_serial_number(struct usb_line6 *line6, u32 *serial_number)
+{
+	return line6_read_data(line6, 0x80d0, serial_number,
+			       sizeof(*serial_number));
+}
+EXPORT_SYMBOL_GPL(line6_read_serial_number);
+
+/*
+	Card destructor.
+*/
+static void line6_destruct(struct snd_card *card)
+{
+	struct usb_line6 *line6 = card->private_data;
+	struct usb_device *usbdev = line6->usbdev;
+
+	/* free buffer memory first: */
+	kfree(line6->buffer_message);
+	kfree(line6->buffer_listen);
+
+	/* then free URBs: */
+	usb_free_urb(line6->urb_listen);
+
+	/* decrement reference counters: */
+	usb_put_dev(usbdev);
+}
+
+/* get data from endpoint descriptor (see usb_maxpacket): */
+static void line6_get_interval(struct usb_line6 *line6)
+{
+	struct usb_device *usbdev = line6->usbdev;
+	struct usb_host_endpoint *ep;
+	unsigned pipe = usb_rcvintpipe(usbdev, line6->properties->ep_ctrl_r);
+	unsigned epnum = usb_pipeendpoint(pipe);
+
+	ep = usbdev->ep_in[epnum];
+	if (ep) {
+		line6->interval = ep->desc.bInterval;
+		line6->max_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
+	} else {
+		dev_err(line6->ifcdev,
+			"endpoint not available, using fallback values");
+		line6->interval = LINE6_FALLBACK_INTERVAL;
+		line6->max_packet_size = LINE6_FALLBACK_MAXPACKETSIZE;
+	}
+}
+
+static int line6_init_cap_control(struct usb_line6 *line6)
+{
+	int ret;
+
+	/* initialize USB buffers: */
+	line6->buffer_listen = kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
+	if (!line6->buffer_listen)
+		return -ENOMEM;
+
+	line6->buffer_message = kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL);
+	if (!line6->buffer_message)
+		return -ENOMEM;
+
+	line6->urb_listen = usb_alloc_urb(0, GFP_KERNEL);
+	if (!line6->urb_listen)
+		return -ENOMEM;
+
+	ret = line6_start_listen(line6);
+	if (ret < 0) {
+		dev_err(line6->ifcdev, "cannot start listening: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+	Probe USB device.
+*/
+int line6_probe(struct usb_interface *interface,
+		const struct usb_device_id *id,
+		const char *driver_name,
+		const struct line6_properties *properties,
+		int (*private_init)(struct usb_line6 *, const struct usb_device_id *id),
+		size_t data_size)
+{
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+	struct snd_card *card;
+	struct usb_line6 *line6;
+	int interface_number;
+	int ret;
+
+	if (WARN_ON(data_size < sizeof(*line6)))
+		return -EINVAL;
+
+	/* we don't handle multiple configurations */
+	if (usbdev->descriptor.bNumConfigurations != 1)
+		return -ENODEV;
+
+	ret = snd_card_new(&interface->dev,
+			   SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+			   THIS_MODULE, data_size, &card);
+	if (ret < 0)
+		return ret;
+
+	/* store basic data: */
+	line6 = card->private_data;
+	line6->card = card;
+	line6->properties = properties;
+	line6->usbdev = usbdev;
+	line6->ifcdev = &interface->dev;
+
+	strcpy(card->id, properties->id);
+	strcpy(card->driver, driver_name);
+	strcpy(card->shortname, properties->name);
+	sprintf(card->longname, "Line 6 %s at USB %s", properties->name,
+		dev_name(line6->ifcdev));
+	card->private_free = line6_destruct;
+
+	usb_set_intfdata(interface, line6);
+
+	/* increment reference counters: */
+	usb_get_dev(usbdev);
+
+	/* initialize device info: */
+	dev_info(&interface->dev, "Line 6 %s found\n", properties->name);
+
+	/* query interface number */
+	interface_number = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	ret = usb_set_interface(usbdev, interface_number,
+				properties->altsetting);
+	if (ret < 0) {
+		dev_err(&interface->dev, "set_interface failed\n");
+		goto error;
+	}
+
+	line6_get_interval(line6);
+
+	if (properties->capabilities & LINE6_CAP_CONTROL) {
+		ret = line6_init_cap_control(line6);
+		if (ret < 0)
+			goto error;
+	}
+
+	/* initialize device data based on device: */
+	ret = private_init(line6, id);
+	if (ret < 0)
+		goto error;
+
+	/* creation of additional special files should go here */
+
+	dev_info(&interface->dev, "Line 6 %s now attached\n",
+		 properties->name);
+
+	return 0;
+
+ error:
+	if (line6->disconnect)
+		line6->disconnect(line6);
+	snd_card_free(card);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(line6_probe);
+
+/*
+	Line 6 device disconnected.
+*/
+void line6_disconnect(struct usb_interface *interface)
+{
+	struct usb_line6 *line6 = usb_get_intfdata(interface);
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+
+	if (!line6)
+		return;
+
+	if (WARN_ON(usbdev != line6->usbdev))
+		return;
+
+	if (line6->urb_listen != NULL)
+		line6_stop_listen(line6);
+
+	snd_card_disconnect(line6->card);
+	if (line6->line6pcm)
+		line6_pcm_disconnect(line6->line6pcm);
+	if (line6->disconnect)
+		line6->disconnect(line6);
+
+	dev_info(&interface->dev, "Line 6 %s now disconnected\n",
+		 line6->properties->name);
+
+	/* make sure the device isn't destructed twice: */
+	usb_set_intfdata(interface, NULL);
+
+	snd_card_free_when_closed(line6->card);
+}
+EXPORT_SYMBOL_GPL(line6_disconnect);
+
+#ifdef CONFIG_PM
+
+/*
+	Suspend Line 6 device.
+*/
+int line6_suspend(struct usb_interface *interface, pm_message_t message)
+{
+	struct usb_line6 *line6 = usb_get_intfdata(interface);
+	struct snd_line6_pcm *line6pcm = line6->line6pcm;
+
+	snd_power_change_state(line6->card, SNDRV_CTL_POWER_D3hot);
+
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL)
+		line6_stop_listen(line6);
+
+	if (line6pcm != NULL) {
+		snd_pcm_suspend_all(line6pcm->pcm);
+		line6pcm->flags = 0;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_suspend);
+
+/*
+	Resume Line 6 device.
+*/
+int line6_resume(struct usb_interface *interface)
+{
+	struct usb_line6 *line6 = usb_get_intfdata(interface);
+
+	if (line6->properties->capabilities & LINE6_CAP_CONTROL)
+		line6_start_listen(line6);
+
+	snd_power_change_state(line6->card, SNDRV_CTL_POWER_D0);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(line6_resume);
+
+#endif /* CONFIG_PM */
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");