summaryrefslogtreecommitdiffstats
path: root/sound/sparc
diff options
context:
space:
mode:
authorMartin Habets <errandir_news@mph.eclipse.co.uk>2005-09-10 15:39:00 +0200
committerJaroslav Kysela <perex@suse.cz>2005-09-12 10:48:38 +0200
commit4338829e09db2d320a00b4e0ed0bcc49859d73cc (patch)
tree2e312913429ae7519c4fd32608caf734eac3cfa8 /sound/sparc
parentafe0f1f6688f4c4c9235873121548e76dedd8ef8 (diff)
downloadlinux-4338829e09db2d320a00b4e0ed0bcc49859d73cc.tar.bz2
[ALSA] Several fixes for the Sun DBRI driver
SPARC DBRI driver This patch contains the following fixes to the Alsa DBRI driver: - Remove 2.6.13 build warning on the prom_getproperty() call. - Rework command synchronization: send a sequence number with D_WAIT, and check it in the completion interrupt. Move synchronization delays from _cmdsend() to _cmdlock() allowing the CPU to do other usefull things while the DBRI is processing the commands. - Fix first argument of printk() calls. - Enable burst transfers for DBRI. Original 2.4 patch from Krzysztof Helt - Make dbri_debug module parameter writable from sysfs. Remove obsolete write access to the /proc debug file. - Replace udelay() with msleep_interruptible() where possible. - Update documentation comments. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/sparc')
-rw-r--r--sound/sparc/dbri.c205
1 files changed, 103 insertions, 102 deletions
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index a56f81bb0049..b5c4c15ae7f0 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -1,6 +1,6 @@
/*
* Driver for DBRI sound chip found on Sparcs.
- * Copyright (C) 2004 Martin Habets (mhabets@users.sourceforge.net)
+ * Copyright (C) 2004, 2005 Martin Habets (mhabets@users.sourceforge.net)
*
* Based entirely upon drivers/sbus/audio/dbri.c which is:
* Copyright (C) 1997 Rudolf Koenig (rfkoenig@immd4.informatik.uni-erlangen.de)
@@ -43,6 +43,12 @@
* audio devices. But the SUN HW group decided against it, at least on my
* LX the speakerbox connector has at least 1 pin missing and 1 wrongly
* connected.
+ *
+ * I've tried to stick to the following function naming conventions:
+ * snd_* ALSA stuff
+ * cs4215_* CS4215 codec specfic stuff
+ * dbri_* DBRI high-level stuff
+ * other DBRI low-level stuff
*/
#include <sound/driver.h>
@@ -87,7 +93,7 @@ MODULE_PARM_DESC(enable, "Enable Sun DBRI soundcard.");
#define D_DESC (1<<5)
static int dbri_debug = 0;
-module_param(dbri_debug, int, 0444);
+module_param(dbri_debug, int, 0644);
MODULE_PARM_DESC(dbri_debug, "Debug value for Sun DBRI soundcard.");
#ifdef DBRI_DEBUG
@@ -320,7 +326,8 @@ typedef struct snd_dbri {
void __iomem *regs; /* dbri HW regs */
int dbri_version; /* 'e' and up is OK */
int dbri_irqp; /* intr queue pointer */
- int wait_seen;
+ int wait_send; /* sequence of command buffers send */
+ int wait_ackd; /* sequence of command buffers acknowledged */
struct dbri_pipe pipes[DBRI_NO_PIPES]; /* DBRI's 32 data pipes */
struct dbri_desc descs[DBRI_NO_DESCS];
@@ -625,16 +632,13 @@ static __u32 reverse_bytes(__u32 b, int len)
Commands are sent to the DBRI by building a list of them in memory,
then writing the address of the first list item to DBRI register 8.
-The list is terminated with a WAIT command, which can generate a
-CPU interrupt if required.
+The list is terminated with a WAIT command, which generates a
+CPU interrupt to signal completion.
Since the DBRI can run in parallel with the CPU, several means of
-synchronization present themselves. The original scheme (Rudolf's)
-was to set a flag when we "cmdlock"ed the DBRI, clear the flag when
-an interrupt signaled completion, and wait on a wait_queue if a routine
-attempted to cmdlock while the flag was set. The problems arose when
-we tried to cmdlock from inside an interrupt handler, which might
-cause scheduling in an interrupt (if we waited), etc, etc
+synchronization present themselves. The method implemented here is close
+to the original scheme (Rudolf's), and uses 2 counters (wait_send and
+wait_ackd) to synchronize the command buffer between the CPU and the DBRI.
A more sophisticated scheme might involve a circular command buffer
or an array of command buffers. A routine could fill one with
@@ -642,70 +646,75 @@ commands and link it onto a list. When a interrupt signaled
completion of the current command buffer, look on the list for
the next one.
-I've decided to implement something much simpler - after each command,
-the CPU waits for the DBRI to finish the command by polling the P bit
-in DBRI register 0. I've tried to implement this in such a way
-that might make implementing a more sophisticated scheme easier.
-
Every time a routine wants to write commands to the DBRI, it must
first call dbri_cmdlock() and get an initial pointer into dbri->dma->cmd
-in return. After the commands have been writen, dbri_cmdsend() is
-called with the final pointer value.
+in return. dbri_cmdlock() will block if the previous commands have not
+been completed yet. After this the commands can be written to the buffer,
+and dbri_cmdsend() is called with the final pointer value to send them
+to the DBRI.
*/
+static void dbri_process_interrupt_buffer(snd_dbri_t * dbri);
+
enum dbri_lock_t { NoGetLock, GetLock };
+#define MAXLOOPS 10
static volatile s32 *dbri_cmdlock(snd_dbri_t * dbri, enum dbri_lock_t get)
{
+ int maxloops = MAXLOOPS;
+
#ifndef SMP
if ((get == GetLock) && spin_is_locked(&dbri->lock)) {
printk(KERN_ERR "DBRI: cmdlock called while in spinlock.");
}
#endif
+ /* Delay if previous commands are still being processed */
+ while ((--maxloops) > 0 && (dbri->wait_send != dbri->wait_ackd)) {
+ msleep_interruptible(1);
+ /* If dbri_cmdlock() got called from inside the
+ * interrupt handler, this will do the processing.
+ */
+ dbri_process_interrupt_buffer(dbri);
+ }
+ if (maxloops == 0) {
+ printk(KERN_ERR "DBRI: Chip never completed command buffer %d\n",
+ dbri->wait_send);
+ } else {
+ dprintk(D_CMD, "Chip completed command buffer (%d)\n",
+ MAXLOOPS - maxloops - 1);
+ }
+
/*if (get == GetLock) spin_lock(&dbri->lock); */
return &dbri->dma->cmd[0];
}
-static void dbri_process_interrupt_buffer(snd_dbri_t *);
-
static void dbri_cmdsend(snd_dbri_t * dbri, volatile s32 * cmd)
{
- int MAXLOOPS = 1000000;
- int maxloops = MAXLOOPS;
volatile s32 *ptr;
+ u32 reg;
for (ptr = &dbri->dma->cmd[0]; ptr < cmd; ptr++) {
dprintk(D_CMD, "cmd: %lx:%08x\n", (unsigned long)ptr, *ptr);
}
if ((cmd - &dbri->dma->cmd[0]) >= DBRI_NO_CMDS - 1) {
- printk("DBRI: Command buffer overflow! (bug in driver)\n");
+ printk(KERN_ERR "DBRI: Command buffer overflow! (bug in driver)\n");
/* Ignore the last part. */
cmd = &dbri->dma->cmd[DBRI_NO_CMDS - 3];
}
+ dbri->wait_send++;
+ dbri->wait_send &= 0xffff; /* restrict it to a 16 bit counter. */
*(cmd++) = DBRI_CMD(D_PAUSE, 0, 0);
- *(cmd++) = DBRI_CMD(D_WAIT, 1, 0);
- dbri->wait_seen = 0;
+ *(cmd++) = DBRI_CMD(D_WAIT, 1, dbri->wait_send);
+
+ /* Set command pointer and signal it is valid. */
sbus_writel(dbri->dma_dvma, dbri->regs + REG8);
- while ((--maxloops) > 0 && (sbus_readl(dbri->regs + REG0) & D_P))
- barrier();
- if (maxloops == 0) {
- printk(KERN_ERR "DBRI: Chip never completed command buffer\n");
- dprintk(D_CMD, "DBRI: Chip never completed command buffer\n");
- } else {
- while ((--maxloops) > 0 && (!dbri->wait_seen))
- dbri_process_interrupt_buffer(dbri);
- if (maxloops == 0) {
- printk(KERN_ERR "DBRI: Chip never acked WAIT\n");
- dprintk(D_CMD, "DBRI: Chip never acked WAIT\n");
- } else {
- dprintk(D_CMD, "Chip completed command "
- "buffer (%d)\n", MAXLOOPS - maxloops);
- }
- }
+ reg = sbus_readl(dbri->regs + REG0);
+ reg |= D_P;
+ sbus_writel(reg, dbri->regs + REG0);
/*spin_unlock(&dbri->lock); */
}
@@ -757,10 +766,11 @@ static void dbri_initialize(snd_dbri_t * dbri)
for (n = 0; n < DBRI_NO_PIPES; n++)
dbri->pipes[n].desc = dbri->pipes[n].first_desc = -1;
- /* We should query the openprom to see what burst sizes this
- * SBus supports. For now, just disable all SBus bursts */
+ /* A brute approach - DBRI falls back to working burst size by itself
+ * On SS20 D_S does not work, so do not try so high. */
tmp = sbus_readl(dbri->regs + REG0);
- tmp &= ~(D_G | D_S | D_E);
+ tmp |= D_G | D_E;
+ tmp &= ~D_S;
sbus_writel(tmp, dbri->regs + REG0);
/*
@@ -805,13 +815,13 @@ static void reset_pipe(snd_dbri_t * dbri, int pipe)
volatile int *cmd;
if (pipe < 0 || pipe > 31) {
- printk("DBRI: reset_pipe called with illegal pipe number\n");
+ printk(KERN_ERR "DBRI: reset_pipe called with illegal pipe number\n");
return;
}
sdp = dbri->pipes[pipe].sdp;
if (sdp == 0) {
- printk("DBRI: reset_pipe called on uninitialized pipe\n");
+ printk(KERN_ERR "DBRI: reset_pipe called on uninitialized pipe\n");
return;
}
@@ -834,12 +844,12 @@ static void reset_pipe(snd_dbri_t * dbri, int pipe)
static void setup_pipe(snd_dbri_t * dbri, int pipe, int sdp)
{
if (pipe < 0 || pipe > 31) {
- printk("DBRI: setup_pipe called with illegal pipe number\n");
+ printk(KERN_ERR "DBRI: setup_pipe called with illegal pipe number\n");
return;
}
if ((sdp & 0xf800) != sdp) {
- printk("DBRI: setup_pipe called with strange SDP value\n");
+ printk(KERN_ERR "DBRI: setup_pipe called with strange SDP value\n");
/* sdp &= 0xf800; */
}
@@ -872,13 +882,13 @@ static void link_time_slot(snd_dbri_t * dbri, int pipe,
int nextpipe;
if (pipe < 0 || pipe > 31 || basepipe < 0 || basepipe > 31) {
- printk
- ("DBRI: link_time_slot called with illegal pipe number\n");
+ printk(KERN_ERR
+ "DBRI: link_time_slot called with illegal pipe number\n");
return;
}
if (dbri->pipes[pipe].sdp == 0 || dbri->pipes[basepipe].sdp == 0) {
- printk("DBRI: link_time_slot called on uninitialized pipe\n");
+ printk(KERN_ERR "DBRI: link_time_slot called on uninitialized pipe\n");
return;
}
@@ -960,8 +970,8 @@ static void unlink_time_slot(snd_dbri_t * dbri, int pipe,
int val;
if (pipe < 0 || pipe > 31 || prevpipe < 0 || prevpipe > 31) {
- printk
- ("DBRI: unlink_time_slot called with illegal pipe number\n");
+ printk(KERN_ERR
+ "DBRI: unlink_time_slot called with illegal pipe number\n");
return;
}
@@ -1001,22 +1011,22 @@ static void xmit_fixed(snd_dbri_t * dbri, int pipe, unsigned int data)
volatile s32 *cmd;
if (pipe < 16 || pipe > 31) {
- printk("DBRI: xmit_fixed: Illegal pipe number\n");
+ printk(KERN_ERR "DBRI: xmit_fixed: Illegal pipe number\n");
return;
}
if (D_SDP_MODE(dbri->pipes[pipe].sdp) == 0) {
- printk("DBRI: xmit_fixed: Uninitialized pipe %d\n", pipe);
+ printk(KERN_ERR "DBRI: xmit_fixed: Uninitialized pipe %d\n", pipe);
return;
}
if (D_SDP_MODE(dbri->pipes[pipe].sdp) != D_SDP_FIXED) {
- printk("DBRI: xmit_fixed: Non-fixed pipe %d\n", pipe);
+ printk(KERN_ERR "DBRI: xmit_fixed: Non-fixed pipe %d\n", pipe);
return;
}
if (!(dbri->pipes[pipe].sdp & D_SDP_TO_SER)) {
- printk("DBRI: xmit_fixed: Called on receive pipe %d\n", pipe);
+ printk(KERN_ERR "DBRI: xmit_fixed: Called on receive pipe %d\n", pipe);
return;
}
@@ -1036,17 +1046,17 @@ static void xmit_fixed(snd_dbri_t * dbri, int pipe, unsigned int data)
static void recv_fixed(snd_dbri_t * dbri, int pipe, volatile __u32 * ptr)
{
if (pipe < 16 || pipe > 31) {
- printk("DBRI: recv_fixed called with illegal pipe number\n");
+ printk(KERN_ERR "DBRI: recv_fixed called with illegal pipe number\n");
return;
}
if (D_SDP_MODE(dbri->pipes[pipe].sdp) != D_SDP_FIXED) {
- printk("DBRI: recv_fixed called on non-fixed pipe %d\n", pipe);
+ printk(KERN_ERR "DBRI: recv_fixed called on non-fixed pipe %d\n", pipe);
return;
}
if (dbri->pipes[pipe].sdp & D_SDP_TO_SER) {
- printk("DBRI: recv_fixed called on transmit pipe %d\n", pipe);
+ printk(KERN_ERR "DBRI: recv_fixed called on transmit pipe %d\n", pipe);
return;
}
@@ -1075,12 +1085,12 @@ static int setup_descs(snd_dbri_t * dbri, int streamno, unsigned int period)
int last_desc = -1;
if (info->pipe < 0 || info->pipe > 15) {
- printk("DBRI: setup_descs: Illegal pipe number\n");
+ printk(KERN_ERR "DBRI: setup_descs: Illegal pipe number\n");
return -2;
}
if (dbri->pipes[info->pipe].sdp == 0) {
- printk("DBRI: setup_descs: Uninitialized pipe %d\n",
+ printk(KERN_ERR "DBRI: setup_descs: Uninitialized pipe %d\n",
info->pipe);
return -2;
}
@@ -1090,20 +1100,20 @@ static int setup_descs(snd_dbri_t * dbri, int streamno, unsigned int period)
if (streamno == DBRI_PLAY) {
if (!(dbri->pipes[info->pipe].sdp & D_SDP_TO_SER)) {
- printk("DBRI: setup_descs: Called on receive pipe %d\n",
+ printk(KERN_ERR "DBRI: setup_descs: Called on receive pipe %d\n",
info->pipe);
return -2;
}
} else {
if (dbri->pipes[info->pipe].sdp & D_SDP_TO_SER) {
- printk
- ("DBRI: setup_descs: Called on transmit pipe %d\n",
+ printk(KERN_ERR
+ "DBRI: setup_descs: Called on transmit pipe %d\n",
info->pipe);
return -2;
}
/* Should be able to queue multiple buffers to receive on a pipe */
if (pipe_active(dbri, info->pipe)) {
- printk("DBRI: recv_on_pipe: Called on active pipe %d\n",
+ printk(KERN_ERR "DBRI: recv_on_pipe: Called on active pipe %d\n",
info->pipe);
return -2;
}
@@ -1120,7 +1130,7 @@ static int setup_descs(snd_dbri_t * dbri, int streamno, unsigned int period)
break;
}
if (desc == DBRI_NO_DESCS) {
- printk("DBRI: setup_descs: No descriptors\n");
+ printk(KERN_ERR "DBRI: setup_descs: No descriptors\n");
return -1;
}
@@ -1165,7 +1175,7 @@ static int setup_descs(snd_dbri_t * dbri, int streamno, unsigned int period)
}
if (first_desc == -1 || last_desc == -1) {
- printk("DBRI: setup_descs: Not enough descriptors available\n");
+ printk(KERN_ERR "DBRI: setup_descs: Not enough descriptors available\n");
return -1;
}
@@ -1270,7 +1280,7 @@ static void reset_chi(snd_dbri_t * dbri, enum master_or_slave master_or_slave,
int divisor = 12288 / clockrate;
if (divisor > 255 || divisor * clockrate != 12288)
- printk("DBRI: illegal bits_per_frame in setup_chi\n");
+ printk(KERN_ERR "DBRI: illegal bits_per_frame in setup_chi\n");
*(cmd++) = DBRI_CMD(D_CHI, 0, D_CHI_CHICM(divisor) | D_CHI_FD
| D_CHI_BPF(bits_per_frame));
@@ -1474,7 +1484,6 @@ static int cs4215_setctrl(snd_dbri_t * dbri)
/* Temporarily mute outputs, and wait 1/8000 sec (125 us)
* to make sure this takes. This avoids clicking noises.
*/
-
cs4215_setdata(dbri, 1);
udelay(125);
@@ -1530,8 +1539,8 @@ static int cs4215_setctrl(snd_dbri_t * dbri)
tmp |= D_C; /* Enable CHI */
sbus_writel(tmp, dbri->regs + REG0);
- for (i = 64; ((dbri->mm.status & 0xe4) != 0x20); --i) {
- udelay(125);
+ for (i = 10; ((dbri->mm.status & 0xe4) != 0x20); --i) {
+ msleep_interruptible(1);
}
if (i == 0) {
dprintk(D_MM, "CS4215 didn't respond to CLB (0x%02x)\n",
@@ -1678,8 +1687,8 @@ buffer and calls dbri_process_one_interrupt() for each interrupt word.
Complicated interrupts are handled by dedicated functions (which
appear first in this file). Any pending interrupts can be serviced by
calling dbri_process_interrupt_buffer(), which works even if the CPU's
-interrupts are disabled. This function is used by dbri_cmdsend()
-to make sure we're synced up with the chip after each command sequence,
+interrupts are disabled. This function is used by dbri_cmdlock()
+to make sure we're synced up with the chip before each command sequence,
even if we're running cli'ed.
*/
@@ -1765,11 +1774,13 @@ DECLARE_TASKLET(xmit_descs_task, xmit_descs, 0);
* Called by main interrupt handler when DBRI signals transmission complete
* on a pipe (interrupt triggered by the B bit in a transmit descriptor).
*
- * Walks through the pipe's list of transmit buffer descriptors, releasing
- * each one's DMA buffer (if present), flagging the descriptor available,
- * and signaling its callback routine (if present), before proceeding
- * to the next one. Stops when the first descriptor is found without
+ * Walks through the pipe's list of transmit buffer descriptors and marks
+ * them as available. Stops when the first descriptor is found without
* TBC (Transmit Buffer Complete) set, or we've run through them all.
+ *
+ * The DMA buffers are not released, but re-used. Since the transmit buffer
+ * descriptors are not clobbered, they can be re-submitted as is. This is
+ * done by the xmit_descs() tasklet above since that could take longer.
*/
static void transmission_complete_intr(snd_dbri_t * dbri, int pipe)
@@ -1885,7 +1896,11 @@ static void dbri_process_one_interrupt(snd_dbri_t * dbri, int x)
}
if (channel == D_INTR_CMD && command == D_WAIT) {
- dbri->wait_seen++;
+ dbri->wait_ackd = val;
+ if (dbri->wait_send != val) {
+ printk(KERN_ERR "Processing wait command %d when %d was send.\n",
+ val, dbri->wait_send);
+ }
return;
}
@@ -1994,8 +2009,7 @@ static irqreturn_t snd_dbri_interrupt(int irq, void *dev_id,
* The only one I've seen is MRR, which will be triggered
* if you let a transmit pipe underrun, then try to CDP it.
*
- * If these things persist, we should probably reset
- * and re-init the chip.
+ * If these things persist, we reset the chip.
*/
if ((++errcnt) % 10 == 0) {
dprintk(D_INT, "Interrupt errors exceeded.\n");
@@ -2094,7 +2108,7 @@ static int snd_dbri_hw_params(snd_pcm_substream_t * substream,
if ((ret = snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(hw_params))) < 0) {
- snd_printk(KERN_ERR "malloc_pages failed with %d\n", ret);
+ printk(KERN_ERR "malloc_pages failed with %d\n", ret);
return ret;
}
@@ -2455,8 +2469,7 @@ static int __init snd_dbri_mixer(snd_dbri_t * dbri)
for (idx = 0; idx < NUM_CS4215_CONTROLS; idx++) {
if ((err = snd_ctl_add(card,
- snd_ctl_new1(&dbri_controls[idx],
- dbri))) < 0)
+ snd_ctl_new1(&dbri_controls[idx], dbri))) < 0)
return err;
}
@@ -2490,8 +2503,6 @@ static void dbri_debug_read(snd_info_entry_t * entry,
int pipe;
snd_iprintf(buffer, "debug=%d\n", dbri_debug);
- snd_iprintf(buffer, "CHI pipe in=%d, out=%d\n",
- dbri->chi_in_pipe, dbri->chi_out_pipe);
for (pipe = 0; pipe < 32; pipe++) {
if (pipe_active(dbri, pipe)) {
struct dbri_pipe *pptr = &dbri->pipes[pipe];
@@ -2506,18 +2517,6 @@ static void dbri_debug_read(snd_info_entry_t * entry,
}
}
}
-
-static void dbri_debug_write(snd_info_entry_t * entry,
- snd_info_buffer_t * buffer)
-{
- char line[80];
- int i;
-
- if (snd_info_get_line(buffer, line, 80) == 0) {
- sscanf(line, "%d\n", &i);
- dbri_debug = i & 0x3f;
- }
-}
#endif
void snd_dbri_proc(snd_dbri_t * dbri)
@@ -2531,9 +2530,7 @@ void snd_dbri_proc(snd_dbri_t * dbri)
#ifdef DBRI_DEBUG
err = snd_card_proc_new(dbri->card, "debug", &entry);
snd_info_set_text_ops(entry, dbri, 4096, dbri_debug_read);
- entry->mode = S_IFREG | S_IRUGO | S_IWUSR; /* Writable for root */
- entry->c.text.write_size = 256;
- entry->c.text.write = dbri_debug_write;
+ entry->mode = S_IFREG | S_IRUGO; /* Readable only. */
#endif
}
@@ -2637,7 +2634,11 @@ static int __init dbri_attach(int prom_node, struct sbus_dev *sdev)
return -ENOENT;
}
- prom_getproperty(prom_node, "intr", (char *)&irq, sizeof(irq));
+ err = prom_getproperty(prom_node, "intr", (char *)&irq, sizeof(irq));
+ if (err < 0) {
+ printk(KERN_ERR "DBRI-%d: Firmware node lacks IRQ property.\n", dev);
+ return -ENODEV;
+ }
card = snd_card_new(index[dev], id[dev], THIS_MODULE,
sizeof(snd_dbri_t));