summaryrefslogtreecommitdiffstats
path: root/sound/soc/soc-dapm.c
diff options
context:
space:
mode:
authorMark Brown <broonie@opensource.wolfsonmicro.com>2010-05-07 21:11:40 +0100
committerMark Brown <broonie@opensource.wolfsonmicro.com>2010-05-10 10:36:48 +0100
commit1547aba993c990e5a316751431328145b38e1fea (patch)
treed9e549fa2d6bb67a632a0cfeefd39e3a077cac5d /sound/soc/soc-dapm.c
parent9949788b793826f2d19e929ac0219ad0e0891e2d (diff)
downloadlinux-1547aba993c990e5a316751431328145b38e1fea.tar.bz2
ASoC: Support leaving paths enabled over system suspend
Some devices can usefully run audio while the Linux system is suspended. One of the most common examples is smartphone systems, which are normally designed to allow audio to be run between the baseband and the CODEC without passing through the CPU and so can suspend the CPU when on a voice call for additional power savings. Support such systems by providing an API snd_soc_dapm_ignore_suspend(). This can be used to mark DAPM endpoints as not being sensitive to system suspend. When the system is being suspended paths between endpoints which are marked as ignoring suspend will be kept active. Both source and sink must be marked, and there must already be an active path between the two endpoints prior to suspend. When paths are active over suspend the bias management will hold the device bias in the ON state. This is used to avoid suspending the CODEC while it is still in use. Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'sound/soc/soc-dapm.c')
-rw-r--r--sound/soc/soc-dapm.c31
1 files changed, 30 insertions, 1 deletions
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 8c8b291320a8..fefb6c44fc81 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -441,7 +441,9 @@ static int snd_soc_dapm_suspend_check(struct snd_soc_dapm_widget *widget)
switch (snd_power_get_state(codec->card)) {
case SNDRV_CTL_POWER_D3hot:
case SNDRV_CTL_POWER_D3cold:
- return 0;
+ if (widget->ignore_suspend)
+ pr_debug("%s ignoring suspend\n", widget->name);
+ return widget->ignore_suspend;
default:
return 1;
}
@@ -2137,6 +2139,33 @@ int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, const char *pin)
EXPORT_SYMBOL_GPL(snd_soc_dapm_get_pin_status);
/**
+ * snd_soc_dapm_ignore_suspend - ignore suspend status for DAPM endpoint
+ * @codec: audio codec
+ * @pin: audio signal pin endpoint (or start point)
+ *
+ * Mark the given endpoint or pin as ignoring suspend. When the
+ * system is disabled a path between two endpoints flagged as ignoring
+ * suspend will not be disabled. The path must already be enabled via
+ * normal means at suspend time, it will not be turned on if it was not
+ * already enabled.
+ */
+int snd_soc_dapm_ignore_suspend(struct snd_soc_codec *codec, const char *pin)
+{
+ struct snd_soc_dapm_widget *w;
+
+ list_for_each_entry(w, &codec->dapm_widgets, list) {
+ if (!strcmp(w->name, pin)) {
+ w->ignore_suspend = 1;
+ return 0;
+ }
+ }
+
+ pr_err("Unknown DAPM pin: %s\n", pin);
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(snd_soc_dapm_ignore_suspend);
+
+/**
* snd_soc_dapm_free - free dapm resources
* @socdev: SoC device
*