diff options
author | Hans de Goede <hdegoede@redhat.com> | 2019-01-03 14:45:32 +0100 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2019-01-04 15:15:32 +0000 |
commit | 0d3e91da0750835cfd5c16487ffb3cdd752ea53a (patch) | |
tree | f0352c556614abb8c11d663bef5d061d2cf8b3ca /sound/soc/intel/boards | |
parent | 4bf538b42933253296daf86aab7ede56b5fb97bf (diff) | |
download | linux-0d3e91da0750835cfd5c16487ffb3cdd752ea53a.tar.bz2 |
ASoC: Intel: bytcht_es8316: Add external speaker mux support
The ES8316 only has a single (amplified) output. The ES8316 appnote showing
the intended usage uses a jack-receptacle which physically disconnects the
speakers from the output when a jack is plugged in.
But all 3 devices using the es8316 which I have (2 Cherry Trail devices and
one Bay Trail CR device), use an analog mux to disconnect the speakers,
driven by a GPIO.
This commit adds support for this, modelling this as a separate speaker
widget / dapm pin-switch which sets the mux to drive the speakers when
selected.
The intend is for userspace to use the recently added jack-detect support
and then automatically select either the Headphone or Speaker output based
on that.
Note this commit includes a workaround for an ACPI table bug which is
present on 2 of the 3 devices I have, see the added comment in the code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'sound/soc/intel/boards')
-rw-r--r-- | sound/soc/intel/boards/bytcht_es8316.c | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 905dd6904710..8e504fca4624 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -19,8 +19,11 @@ * * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +#include <linux/acpi.h> #include <linux/clk.h> #include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> #include <linux/init.h> #include <linux/input.h> #include <linux/module.h> @@ -40,6 +43,8 @@ struct byt_cht_es8316_private { struct clk *mclk; struct snd_soc_jack jack; + struct gpio_desc *speaker_en_gpio; + bool speaker_en; }; #define BYT_CHT_ES8316_SSP0 BIT(16) @@ -56,7 +61,24 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk SSP0 enabled"); } +static int byt_cht_es8316_speaker_power_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_card *card = w->dapm->card; + struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card); + + if (SND_SOC_DAPM_EVENT_ON(event)) + priv->speaker_en = true; + else + priv->speaker_en = false; + + gpiod_set_value_cansleep(priv->speaker_en_gpio, priv->speaker_en); + + return 0; +} + static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = { + SND_SOC_DAPM_SPK("Speaker", NULL), SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), @@ -67,6 +89,10 @@ static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = { */ SND_SOC_DAPM_MIC("Microphone 1", NULL), SND_SOC_DAPM_MIC("Microphone 2", NULL), + + SND_SOC_DAPM_SUPPLY("Speaker Power", SND_SOC_NOPM, 0, 0, + byt_cht_es8316_speaker_power_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), }; static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = { @@ -76,6 +102,14 @@ static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = { {"Headphone", NULL, "HPOL"}, {"Headphone", NULL, "HPOR"}, + + /* + * There is no separate speaker output instead the speakers are muxed to + * the HP outputs. The mux is controlled by the "Speaker Power" supply. + */ + {"Speaker", NULL, "HPOL"}, + {"Speaker", NULL, "HPOR"}, + {"Speaker", NULL, "Speaker Power"}, }; static const struct snd_soc_dapm_route byt_cht_es8316_ssp0_map[] = { @@ -95,6 +129,7 @@ static const struct snd_soc_dapm_route byt_cht_es8316_ssp2_map[] = { }; static const struct snd_kcontrol_new byt_cht_es8316_controls[] = { + SOC_DAPM_PIN_SWITCH("Speaker"), SOC_DAPM_PIN_SWITCH("Headphone"), SOC_DAPM_PIN_SWITCH("Headset Mic"), SOC_DAPM_PIN_SWITCH("Microphone 1"), @@ -323,6 +358,25 @@ static int byt_cht_es8316_resume(struct snd_soc_card *card) } } + /* + * Some Cherry Trail boards with an ES8316 codec have a bug in their + * ACPI tables where the MSSL1680 touchscreen's _PS0 and _PS3 methods + * wrongly also set the speaker-enable GPIO to 1/0. Testing has shown + * that this really is a bug and the GPIO has no influence on the + * touchscreen at all. + * + * The silead.c touchscreen driver does not support runtime suspend, so + * the GPIO can only be changed underneath us during a system suspend. + * This resume() function runs from a pm complete() callback, and thus + * is guaranteed to run after the touchscreen driver/ACPI-subsys has + * brought the touchscreen back up again (and thus changed the GPIO). + * + * So to work around this we pass GPIOD_FLAGS_BIT_NONEXCLUSIVE when + * requesting the GPIO and we set its value here to undo any changes + * done by the touchscreen's broken _PS0 ACPI method. + */ + gpiod_set_value_cansleep(priv->speaker_en_gpio, priv->speaker_en); + return 0; } @@ -347,12 +401,20 @@ static const struct x86_cpu_id baytrail_cpu_ids[] = { {} }; +static const struct acpi_gpio_params first_gpio = { 0, 0, false }; + +static const struct acpi_gpio_mapping byt_cht_es8316_gpios[] = { + { "speaker-enable-gpios", &first_gpio, 1 }, + { }, +}; + static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) { struct byt_cht_es8316_private *priv; struct device *dev = &pdev->dev; struct snd_soc_acpi_mach *mach; const char *i2c_name = NULL; + struct device *codec_dev; int dai_index = 0; int i; int ret = 0; @@ -405,12 +467,39 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) return ret; } + /* get speaker enable GPIO */ + codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, codec_name); + if (!codec_dev) + return -EPROBE_DEFER; + + devm_acpi_dev_add_driver_gpios(codec_dev, byt_cht_es8316_gpios); + priv->speaker_en_gpio = + gpiod_get_index(codec_dev, "speaker-enable", 0, + /* see comment in byt_cht_es8316_resume */ + GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE); + put_device(codec_dev); + + if (IS_ERR(priv->speaker_en_gpio)) { + ret = PTR_ERR(priv->speaker_en_gpio); + switch (ret) { + case -ENOENT: + priv->speaker_en_gpio = NULL; + break; + default: + dev_err(dev, "get speaker GPIO failed: %d\n", ret); + /* fall through */ + case -EPROBE_DEFER: + return ret; + } + } + /* register the soc card */ byt_cht_es8316_card.dev = dev; snd_soc_card_set_drvdata(&byt_cht_es8316_card, priv); ret = devm_snd_soc_register_card(dev, &byt_cht_es8316_card); if (ret) { + gpiod_put(priv->speaker_en_gpio); dev_err(dev, "snd_soc_register_card failed: %d\n", ret); return ret; } @@ -418,11 +507,20 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) return 0; } +static int snd_byt_cht_es8316_mc_remove(struct platform_device *pdev) +{ + struct byt_cht_es8316_private *priv = platform_get_drvdata(pdev); + + gpiod_put(priv->speaker_en_gpio); + return 0; +} + static struct platform_driver snd_byt_cht_es8316_mc_driver = { .driver = { .name = "bytcht_es8316", }, .probe = snd_byt_cht_es8316_mc_probe, + .remove = snd_byt_cht_es8316_mc_remove, }; module_platform_driver(snd_byt_cht_es8316_mc_driver); |