ASoC: Intel: Fix Kconfig with top-level selector

Follow network example suggested by Linus, move Intel definitions
in if/endif block and clarify in help text which options distro
configurations should enable - everything except legacy Baytrail stuff and
NOCODEC (test only)

To avoid user confusion, machine drivers are handled with a submenu made
dependent on this top-level selector.

There should be no functionality change - except that sound capabilities
are restored when using older configs without any user selection.

Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered
out by the top-level selector. This will change in the near future to
allow for this option to be selected by both SST and SOF drivers

(simplification with submenu for machine drivers by Vinod Koul)

Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 44 insertions, 22 deletions

diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 7b49d04e3c60..b827d3b70095 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -1,3 +1,19 @@
+config SND_SOC_INTEL_SST_TOPLEVEL
+	bool "Intel ASoC SST drivers"
+	default y
+	depends on X86 || COMPILE_TEST
+	select SND_SOC_INTEL_MACH
+	help
+	  Intel ASoC SST Platform Drivers. If you have a Intel machine that
+	  has an audio controller with a DSP and I2S or DMIC port, then
+	  enable this option by saying Y
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Intel SST drivers.
+
+if SND_SOC_INTEL_SST_TOPLEVEL
+
 config SND_SST_IPC
 	tristate
 
@@ -11,9 +27,6 @@ config SND_SST_IPC_ACPI
 	select SND_SOC_INTEL_SST
 	select IOSF_MBI
 
-config SND_SOC_INTEL_COMMON
-	tristate
-
 config SND_SOC_INTEL_SST
 	tristate
 	select SND_SOC_INTEL_SST_ACPI if ACPI
@@ -25,47 +38,56 @@ config SND_SOC_INTEL_SST_FIRMWARE
 config SND_SOC_INTEL_SST_ACPI
 	tristate
 
-config SND_SOC_ACPI_INTEL_MATCH
-	tristate
-	select SND_SOC_ACPI if ACPI
-
-config SND_SOC_INTEL_SST_TOPLEVEL
-	tristate "Intel ASoC SST drivers"
-	depends on X86 || COMPILE_TEST
-	select SND_SOC_INTEL_MACH
-	select SND_SOC_INTEL_COMMON
-	help
-          Intel ASoC Audio Drivers. If you have a Intel machine that
-          has audio controller with a DSP and I2S or DMIC port, then
-          enable this option by saying Y or M
-          If unsure select "N".
-
 config SND_SOC_INTEL_HASWELL
 	tristate "Intel ASoC SST driver for Haswell/Broadwell"
-	depends on SND_SOC_INTEL_SST_TOPLEVEL && SND_DMA_SGBUF
+	depends on SND_DMA_SGBUF
 	depends on DMADEVICES
 	select SND_SOC_INTEL_SST
 	select SND_SOC_INTEL_SST_FIRMWARE
+	select SND_SOC_ACPI_INTEL_MATCH
+	help
+	  If you have a Intel Haswell or Broadwell platform connected to
+	  an I2S codec, then enable this option by saying Y or m. This is
+	  typically used for Chromebooks. This is a recommended option.
 
 config SND_SOC_INTEL_BAYTRAIL
 	tristate "Intel ASoC SST driver for Baytrail (legacy)"
-	depends on SND_SOC_INTEL_SST_TOPLEVEL
 	depends on DMADEVICES
 	select SND_SOC_INTEL_SST
 	select SND_SOC_INTEL_SST_FIRMWARE
+	select SND_SOC_ACPI_INTEL_MATCH
+	help
+	  If you have a Intel Baytrail platform connected to an I2S codec,
+	  then enable this option by saying Y or m. This was typically used
+	  for Baytrail Chromebooks but this option is now deprecated and is
+	  not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead.
 
 config SND_SST_ATOM_HIFI2_PLATFORM
 	tristate "Intel ASoC SST driver for HiFi2 platforms (*field, *trail)"
-	depends on SND_SOC_INTEL_SST_TOPLEVEL && X86
+	depends on X86
 	select SND_SOC_COMPRESS
+	select SND_SOC_ACPI_INTEL_MATCH
 
 config SND_SOC_INTEL_SKYLAKE
 	tristate "Intel ASoC SST driver for SKL/BXT/KBL/GLK/CNL"
-	depends on SND_SOC_INTEL_SST_TOPLEVEL && PCI && ACPI
+	depends on PCI && ACPI
 	select SND_HDA_EXT_CORE
 	select SND_HDA_DSP_LOADER
 	select SND_SOC_TOPOLOGY
 	select SND_SOC_INTEL_SST
+	select SND_SOC_ACPI_INTEL_MATCH
+	help
+	  If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/
+	  GeminiLake or CannonLake platform with the DSP enabled in the BIOS
+	  then enable this option by saying Y or m.
+
+config SND_SOC_ACPI_INTEL_MATCH
+	tristate
+	select SND_SOC_ACPI if ACPI
+	# this option controls the compilation of ACPI matching tables and
+	# helpers and is not meant to be selected by the user.
+
+endif ## SND_SOC_INTEL_SST_TOPLEVEL
 
 # ASoC codec drivers
 source "sound/soc/intel/boards/Kconfig"