Merge tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "The amount of changes is smaller at this round (what a surprise), but
  lots of activity is seen. Most of changes are about ASoC driver
  development, especially Intel platforms. Here are some highlights:

  General:
   - Replace all tasklet usages with other alternatives
   - Cleanup of the ASoC error unwinding code
   - Fixes for trivial issues caught by static checker
   - Spell fixes allover the places

  ALSA Core:
   - Lockdep fix for control devices
   - Fix for potential OSS sequencer mutex stalls

  HD-audio and USB-audio:
   - SoundBlaster AE-7 support
   - Changes in quirk table for the rename handling
   - Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.

  ASoC:
   - Lots of updates for Intel SOF and SoundWire enablement
   - Replacement of the DSP driver for some older x86 systems; the new
     code was written from scratch, better maintenance expected
   - Helpers for parsing auxiluary devices from the device tree
   - New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
     Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
     Instruments J721E, TAS2110, TAS2564 and TAS2764"

* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
  ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
  ALSA: hda: fix jack detection with Realtek codecs when in D3
  ALSA: fireworks: use semicolons rather than commas to separate statements
  ALSA: hda: use semicolons rather than commas to separate statements
  ALSA: hda/i915 - fix list corruption with concurrent probes
  ASoC: dmaengine: Document support for TX only or RX only streams
  ASoC: mchp-spdiftx: remove 'TX' from playback stream name
  ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
  ASoC: tas2764: Add the driver for the TAS2764
  dt-bindings: tas2764: Add the TAS2764 binding doc
  ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
  ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
  ASoC: stm32: dfsdm: add actual resolution trace
  ASoC: stm32: dfsdm: change rate limits
  ASoC: qcom: sc7180: Add support for audio over DP
  Asoc: qcom: lpass-platform : Increase buffer size
  ASoC: qcom: Add support for lpass hdmi driver
  Asoc: qcom: lpass:Update lpaif_dmactl members order
  Asoc:qcom:lpass-cpu:Update dts property read API
  ASoC: dt-bindings: Add dt binding for lpass hdmi
  ...

1 files changed, 12 insertions, 38 deletions

diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 82805a8681e5..d5bae5d1ab6f 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -31,50 +31,24 @@ config SND_SST_IPC_ACPI
 	# This option controls the ACPI-based IPC for HiFi2 platforms
 	# (Baytrail, Cherrytrail)
 
-config SND_SOC_INTEL_SST_ACPI
-	tristate
-	# This option controls ACPI-based probing on
-	# Haswell/Broadwell/Baytrail legacy and will be set
-	# when these platforms are enabled
-
 config SND_SOC_INTEL_SST
 	tristate
 
-config SND_SOC_INTEL_SST_FIRMWARE
-	tristate
+config SND_SOC_INTEL_CATPT
+	tristate "Haswell and Broadwell"
+	depends on ACPI || COMPILE_TEST
+	depends on DMADEVICES && SND_DMA_SGBUF
 	select DW_DMAC_CORE
-	# This option controls firmware download on
-	# Haswell/Broadwell/Baytrail legacy and will be set
-	# when these platforms are enabled
-
-config SND_SOC_INTEL_HASWELL
-	tristate "Haswell/Broadwell Platforms"
-	depends on SND_DMA_SGBUF
-	depends on DMADEVICES && ACPI
-	select SND_SOC_INTEL_SST
-	select SND_SOC_INTEL_SST_ACPI
-	select SND_SOC_INTEL_SST_FIRMWARE
 	select SND_SOC_ACPI_INTEL_MATCH
 	help
-	  If you have a Intel Haswell or Broadwell platform connected to
-	  an I2S codec, then enable this option by saying Y or m. This is
-	  typically used for Chromebooks. This is a recommended option.
-	  This option is mutually exclusive with the SOF support on
-	  Broadwell. If you want to enable SOF on Broadwell, you need to
-	  deselect this option first.
+	  Enable support for Intel(R) Haswell and Broadwell platforms
+	  with I2S codec present. This is a recommended option.
+	  Say Y or m if you have such device.
+	  If unsure, say N.
 
-config SND_SOC_INTEL_BAYTRAIL
-	tristate "Baytrail (legacy) Platforms"
-	depends on DMADEVICES && ACPI && SND_SST_ATOM_HIFI2_PLATFORM=n && SND_SOC_SOF_BAYTRAIL=n
-	select SND_SOC_INTEL_SST
-	select SND_SOC_INTEL_SST_ACPI
-	select SND_SOC_INTEL_SST_FIRMWARE
-	select SND_SOC_ACPI_INTEL_MATCH
-	help
-	  If you have a Intel Baytrail platform connected to an I2S codec,
-	  then enable this option by saying Y or m. This was typically used
-	  for Baytrail Chromebooks but this option is now deprecated and is
-	  not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead.
+config SND_SOC_INTEL_HASWELL
+	tristate
+	select SND_SOC_INTEL_CATPT
 
 config SND_SST_ATOM_HIFI2_PLATFORM
 	tristate
@@ -209,7 +183,7 @@ config SND_SOC_INTEL_SKYLAKE_SSP_CLK
 config SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC
 	bool "HDAudio codec support"
 	help
-	  If you have Intel Skylake or Kabylake with HDaudio codec
+	  If you have Intel Skylake or Kabylake with HDAudio codec
 	  and DMIC present then enable this option by saying Y.
 
 config SND_SOC_INTEL_SKYLAKE_COMMON