diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-09-17 17:43:33 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-09-17 17:43:33 -0700 |
commit | 6ab8ad31601f29470eb895fd95e5c963e125aa1b (patch) | |
tree | 73327fe9fc2ee62e7815fa0a666fdf46aaab7322 /sound/soc/fsl/fsl_esai.c | |
parent | ea982ba7f79141d86eb7a440fcba6796ed718b9b (diff) | |
parent | 9bf9bf5440b99edfba496388c90b52ebcd9df715 (diff) | |
download | linux-6ab8ad31601f29470eb895fd95e5c963e125aa1b.tar.bz2 |
Merge tag 'sound-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As shown in diffstat and logs, it was again a busy development cycle
at this time, too. The most significant changes are still on-going
refactoring / modernization works for ASoC core and drivers, but there
are lots of other changes as well. Here we go, some highlights below:
ASoC:
- Quite a lot of cleanup / refactoring of ASoC core and APIs; most of
them are systematic, but also including cleanups and modernization
- A bulk of updates for some ASoC platforms, Freescale, sunxi and
Intel SST/SOF
- Initial support for Sound Open Firmware on i.MX8
- Removal of deprecated w90x900 and nuc900 drivers
- New support for Cirrus Logic CS47L15 and CS47L92, Freescale i.MX
7ULP and 8MQ, Meson G12A and NXP UDA1334
USB-audio:
- More validations of descriptor units for hardening against bugs
reported by fuzzers
- PCM device assignment workaround for a past call-order change
- Scarlett Gen2 mixer interface, a few more more quirks
HD-audio:
- Support for audio component with AMD/ATI and Nvidia HDMI codecs
- Clean up HD-audio core and remove indirect access ops for Intel SOF
- DMIC detection at probe; it would make systems automatically
falling back to SST/SOF driver on devices that need DMIC handling.
Needs a new Kconfig to set, and beware that it's still new and a
bit experimental
FireWire:
- Lots of code refactoring and cleanups"
* tag 'sound-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (521 commits)
ASoC: sdm845: remove unneeded semicolon
ASoC: fsl_sai: Implement set_bclk_ratio
ASoC: dmaengine: Replace strncpy() with strscpy_pad() for pcm->name
ASoC: wcd9335: remove redundant use of ret variable
ALSA: firewire-tascam: check intermediate state of clock status and retry
ALSA: firewire-tascam: handle error code when getting current source of clock
ASoC: hdmi-codec: Add an op to set callback function for plug event
ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF
ASoC: rt5677: Remove magic number register writes
ASoC: soc-core: self contained soc_unbind_aux_dev()
ASoC: soc-core: add soc_unbind_aux_dev()
ASoC: soc-core: self contained soc_bind_aux_dev()
ASoC: soc-core: move soc_probe_link_dais() next to soc_remove_link_dais()
ASoC: soc-core: self contained soc_probe_link_dais()
ASoC: soc-core: add new soc_link_init()
ASoC: soc-core: move soc_probe_dai() next to soc_remove_dai()
ASoC: soc-core: self contained soc_remove_link_dais()
ASoC: soc-core: self contained soc_remove_link_components()
ASoC: soc-core: self contained soc_probe_link_components()
ASoC: rt1308: make array pd static const, makes object smaller
...
Diffstat (limited to 'sound/soc/fsl/fsl_esai.c')
-rw-r--r-- | sound/soc/fsl/fsl_esai.c | 267 |
1 files changed, 193 insertions, 74 deletions
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index 10d2210c91ef..a78e4ab478df 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -32,15 +32,18 @@ * @extalclk: esai clock source to derive HCK, SCK and FS * @fsysclk: system clock source to derive HCK, SCK and FS * @spbaclk: SPBA clock (optional, depending on SoC design) + * @task: tasklet to handle the reset operation * @fifo_depth: depth of tx/rx FIFO * @slot_width: width of each DAI slot * @slots: number of slots + * @channels: channel num for tx or rx * @hck_rate: clock rate of desired HCKx clock * @sck_rate: clock rate of desired SCKx clock * @hck_dir: the direction of HCKx pads * @sck_div: if using PSR/PM dividers for SCKx clock * @slave_mode: if fully using DAI slave mode * @synchronous: if using tx/rx synchronous mode + * @reset_at_xrun: flags for enable reset operaton * @name: driver name */ struct fsl_esai { @@ -52,17 +55,20 @@ struct fsl_esai { struct clk *extalclk; struct clk *fsysclk; struct clk *spbaclk; + struct tasklet_struct task; u32 fifo_depth; u32 slot_width; u32 slots; u32 tx_mask; u32 rx_mask; + u32 channels[2]; u32 hck_rate[2]; u32 sck_rate[2]; bool hck_dir[2]; bool sck_div[2]; bool slave_mode; bool synchronous; + bool reset_at_xrun; char name[32]; }; @@ -71,8 +77,16 @@ static irqreturn_t esai_isr(int irq, void *devid) struct fsl_esai *esai_priv = (struct fsl_esai *)devid; struct platform_device *pdev = esai_priv->pdev; u32 esr; + u32 saisr; regmap_read(esai_priv->regmap, REG_ESAI_ESR, &esr); + regmap_read(esai_priv->regmap, REG_ESAI_SAISR, &saisr); + + if ((saisr & (ESAI_SAISR_TUE | ESAI_SAISR_ROE)) && + esai_priv->reset_at_xrun) { + dev_dbg(&pdev->dev, "reset module for xrun\n"); + tasklet_schedule(&esai_priv->task); + } if (esr & ESAI_ESR_TINIT_MASK) dev_dbg(&pdev->dev, "isr: Transmission Initialized\n"); @@ -543,64 +557,184 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream, return 0; } +static int fsl_esai_hw_init(struct fsl_esai *esai_priv) +{ + struct platform_device *pdev = esai_priv->pdev; + int ret; + + /* Reset ESAI unit */ + ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR, + ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK, + ESAI_ECR_ESAIEN | ESAI_ECR_ERST); + if (ret) { + dev_err(&pdev->dev, "failed to reset ESAI: %d\n", ret); + return ret; + } + + /* + * We need to enable ESAI so as to access some of its registers. + * Otherwise, we would fail to dump regmap from user space. + */ + ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR, + ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK, + ESAI_ECR_ESAIEN); + if (ret) { + dev_err(&pdev->dev, "failed to enable ESAI: %d\n", ret); + return ret; + } + + regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC, + ESAI_PRRC_PDC_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC, + ESAI_PCRC_PC_MASK, 0); + + return 0; +} + +static int fsl_esai_register_restore(struct fsl_esai *esai_priv) +{ + int ret; + + /* FIFO reset for safety */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR, + ESAI_xFCR_xFR, ESAI_xFCR_xFR); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR, + ESAI_xFCR_xFR, ESAI_xFCR_xFR); + + regcache_mark_dirty(esai_priv->regmap); + ret = regcache_sync(esai_priv->regmap); + if (ret) + return ret; + + /* FIFO reset done */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0); + + return 0; +} + +static void fsl_esai_trigger_start(struct fsl_esai *esai_priv, bool tx) +{ + u8 i, channels = esai_priv->channels[tx]; + u32 pins = DIV_ROUND_UP(channels, esai_priv->slots); + u32 mask; + + regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), + ESAI_xFCR_xFEN_MASK, ESAI_xFCR_xFEN); + + /* Write initial words reqiured by ESAI as normal procedure */ + for (i = 0; tx && i < channels; i++) + regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0); + + /* + * When set the TE/RE in the end of enablement flow, there + * will be channel swap issue for multi data line case. + * In order to workaround this issue, we switch the bit + * enablement sequence to below sequence + * 1) clear the xSMB & xSMA: which is done in probe and + * stop state. + * 2) set TE/RE + * 3) set xSMB + * 4) set xSMA: xSMA is the last one in this flow, which + * will trigger esai to start. + */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), + tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, + tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins)); + mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask; + + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx), + ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(mask)); + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx), + ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(mask)); + + /* Enable Exception interrupt */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), + ESAI_xCR_xEIE_MASK, ESAI_xCR_xEIE); +} + +static void fsl_esai_trigger_stop(struct fsl_esai *esai_priv, bool tx) +{ + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), + ESAI_xCR_xEIE_MASK, 0); + + regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), + tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx), + ESAI_xSMA_xS_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx), + ESAI_xSMB_xS_MASK, 0); + + /* Disable and reset FIFO */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), + ESAI_xFCR_xFR | ESAI_xFCR_xFEN, ESAI_xFCR_xFR); + regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), + ESAI_xFCR_xFR, 0); +} + +static void fsl_esai_hw_reset(unsigned long arg) +{ + struct fsl_esai *esai_priv = (struct fsl_esai *)arg; + bool tx = true, rx = false, enabled[2]; + u32 tfcr, rfcr; + + /* Save the registers */ + regmap_read(esai_priv->regmap, REG_ESAI_TFCR, &tfcr); + regmap_read(esai_priv->regmap, REG_ESAI_RFCR, &rfcr); + enabled[tx] = tfcr & ESAI_xFCR_xFEN; + enabled[rx] = rfcr & ESAI_xFCR_xFEN; + + /* Stop the tx & rx */ + fsl_esai_trigger_stop(esai_priv, tx); + fsl_esai_trigger_stop(esai_priv, rx); + + /* Reset the esai, and ignore return value */ + fsl_esai_hw_init(esai_priv); + + /* Enforce ESAI personal resets for both TX and RX */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, + ESAI_xCR_xPR_MASK, ESAI_xCR_xPR); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, + ESAI_xCR_xPR_MASK, ESAI_xCR_xPR); + + /* Restore registers by regcache_sync, and ignore return value */ + fsl_esai_register_restore(esai_priv); + + /* Remove ESAI personal resets by configuring PCRC and PRRC also */ + regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, + ESAI_xCR_xPR_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, + ESAI_xCR_xPR_MASK, 0); + regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC, + ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO)); + regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC, + ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO)); + + /* Restart tx / rx, if they already enabled */ + if (enabled[tx]) + fsl_esai_trigger_start(esai_priv, tx); + if (enabled[rx]) + fsl_esai_trigger_start(esai_priv, rx); +} + static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *dai) { struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; - u8 i, channels = substream->runtime->channels; - u32 pins = DIV_ROUND_UP(channels, esai_priv->slots); - u32 mask; + + esai_priv->channels[tx] = substream->runtime->channels; switch (cmd) { case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), - ESAI_xFCR_xFEN_MASK, ESAI_xFCR_xFEN); - - /* Write initial words reqiured by ESAI as normal procedure */ - for (i = 0; tx && i < channels; i++) - regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0); - - /* - * When set the TE/RE in the end of enablement flow, there - * will be channel swap issue for multi data line case. - * In order to workaround this issue, we switch the bit - * enablement sequence to below sequence - * 1) clear the xSMB & xSMA: which is done in probe and - * stop state. - * 2) set TE/RE - * 3) set xSMB - * 4) set xSMA: xSMA is the last one in this flow, which - * will trigger esai to start. - */ - regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), - tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, - tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins)); - mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask; - - regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx), - ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(mask)); - regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx), - ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(mask)); - + fsl_esai_trigger_start(esai_priv, tx); break; case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), - tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0); - regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx), - ESAI_xSMA_xS_MASK, 0); - regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx), - ESAI_xSMB_xS_MASK, 0); - - /* Disable and reset FIFO */ - regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), - ESAI_xFCR_xFR | ESAI_xFCR_xFEN, ESAI_xFCR_xFR); - regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), - ESAI_xFCR_xFR, 0); + fsl_esai_trigger_stop(esai_priv, tx); break; default: return -EINVAL; @@ -787,6 +921,10 @@ static int fsl_esai_probe(struct platform_device *pdev) esai_priv->pdev = pdev; snprintf(esai_priv->name, sizeof(esai_priv->name), "%pOFn", np); + if (of_device_is_compatible(np, "fsl,vf610-esai") || + of_device_is_compatible(np, "fsl,imx35-esai")) + esai_priv->reset_at_xrun = true; + /* Get the addresses and IRQ */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); regs = devm_ioremap_resource(&pdev->dev, res); @@ -824,10 +962,8 @@ static int fsl_esai_probe(struct platform_device *pdev) PTR_ERR(esai_priv->spbaclk)); irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "no irq for node %s\n", pdev->name); + if (irq < 0) return irq; - } ret = devm_request_irq(&pdev->dev, irq, esai_isr, 0, esai_priv->name, esai_priv); @@ -866,22 +1002,9 @@ static int fsl_esai_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, esai_priv); - /* Reset ESAI unit */ - ret = regmap_write(esai_priv->regmap, REG_ESAI_ECR, ESAI_ECR_ERST); - if (ret) { - dev_err(&pdev->dev, "failed to reset ESAI: %d\n", ret); - return ret; - } - - /* - * We need to enable ESAI so as to access some of its registers. - * Otherwise, we would fail to dump regmap from user space. - */ - ret = regmap_write(esai_priv->regmap, REG_ESAI_ECR, ESAI_ECR_ESAIEN); - if (ret) { - dev_err(&pdev->dev, "failed to enable ESAI: %d\n", ret); + ret = fsl_esai_hw_init(esai_priv); + if (ret) return ret; - } esai_priv->tx_mask = 0xFFFFFFFF; esai_priv->rx_mask = 0xFFFFFFFF; @@ -899,6 +1022,9 @@ static int fsl_esai_probe(struct platform_device *pdev) return ret; } + tasklet_init(&esai_priv->task, fsl_esai_hw_reset, + (unsigned long)esai_priv); + pm_runtime_enable(&pdev->dev); regcache_cache_only(esai_priv->regmap, true); @@ -912,7 +1038,10 @@ static int fsl_esai_probe(struct platform_device *pdev) static int fsl_esai_remove(struct platform_device *pdev) { + struct fsl_esai *esai_priv = platform_get_drvdata(pdev); + pm_runtime_disable(&pdev->dev); + tasklet_kill(&esai_priv->task); return 0; } @@ -920,6 +1049,7 @@ static int fsl_esai_remove(struct platform_device *pdev) static const struct of_device_id fsl_esai_dt_ids[] = { { .compatible = "fsl,imx35-esai", }, { .compatible = "fsl,vf610-esai", }, + { .compatible = "fsl,imx6ull-esai", }, {} }; MODULE_DEVICE_TABLE(of, fsl_esai_dt_ids); @@ -955,20 +1085,10 @@ static int fsl_esai_runtime_resume(struct device *dev) regcache_cache_only(esai->regmap, false); - /* FIFO reset for safety */ - regmap_update_bits(esai->regmap, REG_ESAI_TFCR, - ESAI_xFCR_xFR, ESAI_xFCR_xFR); - regmap_update_bits(esai->regmap, REG_ESAI_RFCR, - ESAI_xFCR_xFR, ESAI_xFCR_xFR); - - ret = regcache_sync(esai->regmap); + ret = fsl_esai_register_restore(esai); if (ret) goto err_regcache_sync; - /* FIFO reset done */ - regmap_update_bits(esai->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0); - regmap_update_bits(esai->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0); - return 0; err_regcache_sync: @@ -991,7 +1111,6 @@ static int fsl_esai_runtime_suspend(struct device *dev) struct fsl_esai *esai = dev_get_drvdata(dev); regcache_cache_only(esai->regmap, true); - regcache_mark_dirty(esai->regmap); if (!IS_ERR(esai->fsysclk)) clk_disable_unprepare(esai->fsysclk); |