diff options
| author | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2009-07-10 22:24:27 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2009-08-03 16:59:09 +0100 |
| commit | 7084a42b965d972079201414d19a399e65b26099 (patch) | |
| tree | 391a0ed913eb769013ca65e3c042ac043981dbfa /sound/soc/codecs/wm8728.c | |
| parent | 030c819e79e8ad0320486e9ccbe76d2f0870369f (diff) | |
| download | linux-7084a42b965d972079201414d19a399e65b26099.tar.bz2 | |
ASoC: Add I/O control bus information to factored out cache setup
While writes tend to be able to use a fairly bus independant format to
do the writes reads are all bus specific. To allow us to factor out
this code include the bus type as a parameter when setting up the
cache.
Initially just use this to factor out hw_write_t for I2C.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'sound/soc/codecs/wm8728.c')
| -rw-r--r-- | sound/soc/codecs/wm8728.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/sound/soc/codecs/wm8728.c b/sound/soc/codecs/wm8728.c index 66da44b08d35..a28630de9c91 100644 --- a/sound/soc/codecs/wm8728.c +++ b/sound/soc/codecs/wm8728.c @@ -248,7 +248,8 @@ static int wm8728_resume(struct platform_device *pdev) * initialise the WM8728 driver * register the mixer and dsp interfaces with the kernel */ -static int wm8728_init(struct snd_soc_device *socdev) +static int wm8728_init(struct snd_soc_device *socdev, + enum snd_soc_control_type control) { struct snd_soc_codec *codec = socdev->card->codec; int ret = 0; @@ -266,7 +267,7 @@ static int wm8728_init(struct snd_soc_device *socdev) if (codec->reg_cache == NULL) return -ENOMEM; - ret = snd_soc_codec_set_cache_io(codec, 7, 9); + ret = snd_soc_codec_set_cache_io(codec, 7, 9, control); if (ret < 0) { printk(KERN_ERR "wm8728: failed to configure cache I/O: %d\n", ret); @@ -323,7 +324,7 @@ static int wm8728_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = wm8728_init(socdev); + ret = wm8728_init(socdev, SND_SOC_I2C); if (ret < 0) pr_err("failed to initialise WM8728\n"); @@ -403,7 +404,7 @@ static int __devinit wm8728_spi_probe(struct spi_device *spi) codec->control_data = spi; - ret = wm8728_init(socdev); + ret = wm8728_init(socdev, SND_SOC_SPI); if (ret < 0) dev_err(&spi->dev, "failed to initialise WM8728\n"); @@ -472,7 +473,6 @@ static int wm8728_probe(struct platform_device *pdev) #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - codec->hw_write = (hw_write_t)i2c_master_send; ret = wm8728_add_i2c_device(pdev, setup); } #endif |