Merge tag 'asoc-v3.15' into asoc-intel

ASoC: Updates for v3.15

Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:

 - Lots of cleanups from Takashi for enumerations; the original API for
   these was error prone so he's refactored lots of code to use more
   modern APIs which avoid issues.
 - Elimination of the ASoC level wrappers for I2C and SPI moving us
   closer to converting to regmap completely and avoiding some
   randconfig hassle.
 - Provide both manually and transparently locked DAPM APIs rather than
   a mix of the two fixing some concurrency issues.
 - Start converting CODEC drivers to use separate bus interface drivers
   rather than having them all in one file helping avoid dependency
   issues.
 - DPCM support for Intel Haswell and Bay Trail platforms.
 - Lots of work on improvements for simple-card, DaVinci and the Renesas
   rcar drivers.
 - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
   CSR SiRF SoC.

Conflicts:
	sound/soc/intel/Kconfig

1 files changed, 21 insertions, 15 deletions

diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c
index 4e3e31aaf509..d3fa65fd9e85 100644
--- a/sound/soc/codecs/wm5100.c
+++ b/sound/soc/codecs/wm5100.c
@@ -506,21 +506,21 @@ static const char *wm5100_lhpf_mode_text[] = {
 	"Low-pass", "High-pass"
 };
 
-static const struct soc_enum wm5100_lhpf1_mode =
-	SOC_ENUM_SINGLE(WM5100_HPLPF1_1, WM5100_LHPF1_MODE_SHIFT, 2,
-			wm5100_lhpf_mode_text);
+static SOC_ENUM_SINGLE_DECL(wm5100_lhpf1_mode,
+			    WM5100_HPLPF1_1, WM5100_LHPF1_MODE_SHIFT,
+			    wm5100_lhpf_mode_text);
 
-static const struct soc_enum wm5100_lhpf2_mode =
-	SOC_ENUM_SINGLE(WM5100_HPLPF2_1, WM5100_LHPF2_MODE_SHIFT, 2,
-			wm5100_lhpf_mode_text);
+static SOC_ENUM_SINGLE_DECL(wm5100_lhpf2_mode,
+			    WM5100_HPLPF2_1, WM5100_LHPF2_MODE_SHIFT,
+			    wm5100_lhpf_mode_text);
 
-static const struct soc_enum wm5100_lhpf3_mode =
-	SOC_ENUM_SINGLE(WM5100_HPLPF3_1, WM5100_LHPF3_MODE_SHIFT, 2,
-			wm5100_lhpf_mode_text);
+static SOC_ENUM_SINGLE_DECL(wm5100_lhpf3_mode,
+			    WM5100_HPLPF3_1, WM5100_LHPF3_MODE_SHIFT,
+			    wm5100_lhpf_mode_text);
 
-static const struct soc_enum wm5100_lhpf4_mode =
-	SOC_ENUM_SINGLE(WM5100_HPLPF4_1, WM5100_LHPF4_MODE_SHIFT, 2,
-			wm5100_lhpf_mode_text);
+static SOC_ENUM_SINGLE_DECL(wm5100_lhpf4_mode,
+			    WM5100_HPLPF4_1, WM5100_LHPF4_MODE_SHIFT,
+			    wm5100_lhpf_mode_text);
 
 static const struct snd_kcontrol_new wm5100_snd_controls[] = {
 SOC_SINGLE("IN1 High Performance Switch", WM5100_IN1L_CONTROL,
@@ -2100,6 +2100,7 @@ static void wm5100_micd_irq(struct wm5100_priv *wm5100)
 int wm5100_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack)
 {
 	struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
 
 	if (jack) {
 		wm5100->jack = jack;
@@ -2117,9 +2118,14 @@ int wm5100_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack)
 				    WM5100_ACCDET_RATE_MASK);
 
 		/* We need the charge pump to power MICBIAS */
-		snd_soc_dapm_force_enable_pin(&codec->dapm, "CP2");
-		snd_soc_dapm_force_enable_pin(&codec->dapm, "SYSCLK");
-		snd_soc_dapm_sync(&codec->dapm);
+		snd_soc_dapm_mutex_lock(dapm);
+
+		snd_soc_dapm_force_enable_pin_unlocked(dapm, "CP2");
+		snd_soc_dapm_force_enable_pin_unlocked(dapm, "SYSCLK");
+
+		snd_soc_dapm_sync_unlocked(dapm);
+
+		snd_soc_dapm_mutex_unlock(dapm);
 
 		/* We start off just enabling microphone detection - even a
 		 * plain headphone will trigger detection.