diff options
author | Hans de Goede <hdegoede@redhat.com> | 2018-02-25 11:46:48 +0100 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2018-03-01 19:13:01 +0000 |
commit | d082174c99e77beb06a51c90ac61934554e516e1 (patch) | |
tree | c0d3c249151b2d117d2510d7535733433547f253 /sound/soc/codecs/rt5651.c | |
parent | 5f293d4354f8aae3c8617f83a3cbd30047676b4d (diff) | |
download | linux-d082174c99e77beb06a51c90ac61934554e516e1.tar.bz2 |
ASoC: rt5651: Remove is_sys_clk_from_pll()
is_sys_clk_from_pll() is used as a snd_soc_dapm_route.connected callback,
checking RT5651_GBL_CLK to determine if the sys-clk is PLL1 and thus the
PWR_PLL bit in reg PWR_ANLG2 must be set.
RT5651_GBL_CLK is changed by rt5651_set_dai_sysclk(), which gets called by
the pre_pmu / post_pmd functions of the "Platform Clock" dapm-supply.
This creates an ordering issue, during a dapm transition first all
connected() callbacks are called to build a list of supplies to enable
and then the complete list is walked to enable the supplies. Since the
connected() check happens before enabling any supplies,
is_sys_clk_from_pll() ends up deciding if the PWR_PLL bit should be set
based on the state the "Platform Clock" supply had *before* the transition.
This sometimes results in PWR_PLL being off, even though *after* the
transition PLL1 is configured as sys-clk.
This commit removes is_sys_clk_from_pll() instead simply setting / clearing
PWR_PLL in rt5651_set_dai_sysclk() based on the selected sys-clk, which
fixes this and as a bonus results in a nice cleanup.
Tested-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'sound/soc/codecs/rt5651.c')
-rw-r--r-- | sound/soc/codecs/rt5651.c | 24 |
1 files changed, 4 insertions, 20 deletions
diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index 4d93248b6401..8548f9406520 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -398,20 +398,6 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w, return idx; } -static int is_sysclk_from_pll(struct snd_soc_dapm_widget *source, - struct snd_soc_dapm_widget *sink) -{ - struct snd_soc_component *component = snd_soc_dapm_to_component(source->dapm); - unsigned int val; - - val = snd_soc_component_read32(component, RT5651_GLB_CLK); - val &= RT5651_SCLK_SRC_MASK; - if (val == RT5651_SCLK_SRC_PLL1) - return 1; - else - return 0; -} - /* Digital Mixer */ static const struct snd_kcontrol_new rt5651_sto1_adc_l_mix[] = { SOC_DAPM_SINGLE("ADC1 Switch", RT5651_STO1_ADC_MIXER, @@ -883,8 +869,6 @@ static const struct snd_soc_dapm_widget rt5651_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY_S("ADC ASRC", 1, RT5651_PLL_MODE_2, 11, 0, NULL, 0), - SND_SOC_DAPM_SUPPLY("PLL1", RT5651_PWR_ANLG2, - RT5651_PWR_PLL_BIT, 0, NULL, 0), /* Input Side */ SND_SOC_DAPM_SUPPLY("JD Power", RT5651_PWR_ANLG2, RT5651_PWM_JD_M_BIT, 0, NULL, 0), @@ -1167,7 +1151,6 @@ static const struct snd_soc_dapm_route rt5651_dapm_routes[] = { {"Stereo1 ADC MIXL", "ADC1 Switch", "Stereo1 ADC L1 Mux"}, {"Stereo1 ADC MIXL", "ADC2 Switch", "Stereo1 ADC L2 Mux"}, {"Stereo1 ADC MIXL", NULL, "Stereo1 Filter"}, - {"Stereo1 Filter", NULL, "PLL1", is_sysclk_from_pll}, {"Stereo1 Filter", NULL, "ADC ASRC"}, {"Stereo1 ADC MIXR", "ADC1 Switch", "Stereo1 ADC R1 Mux"}, @@ -1177,7 +1160,6 @@ static const struct snd_soc_dapm_route rt5651_dapm_routes[] = { {"Stereo2 ADC MIXL", "ADC1 Switch", "Stereo2 ADC L1 Mux"}, {"Stereo2 ADC MIXL", "ADC2 Switch", "Stereo2 ADC L2 Mux"}, {"Stereo2 ADC MIXL", NULL, "Stereo2 Filter"}, - {"Stereo2 Filter", NULL, "PLL1", is_sysclk_from_pll}, {"Stereo2 Filter", NULL, "ADC ASRC"}, {"Stereo2 ADC MIXR", "ADC1 Switch", "Stereo2 ADC R1 Mux"}, @@ -1244,10 +1226,8 @@ static const struct snd_soc_dapm_route rt5651_dapm_routes[] = { {"PDM R Mux", "DD MIX", "DAC MIXR"}, {"DAC L1", NULL, "Stereo DAC MIXL"}, - {"DAC L1", NULL, "PLL1", is_sysclk_from_pll}, {"DAC L1", NULL, "DAC L1 Power"}, {"DAC R1", NULL, "Stereo DAC MIXR"}, - {"DAC R1", NULL, "PLL1", is_sysclk_from_pll}, {"DAC R1", NULL, "DAC R1 Power"}, {"DD MIXL", "DAC L1 Switch", "DAC MIXL"}, @@ -1443,6 +1423,7 @@ static int rt5651_set_dai_sysclk(struct snd_soc_dai *dai, struct snd_soc_component *component = dai->component; struct rt5651_priv *rt5651 = snd_soc_component_get_drvdata(component); unsigned int reg_val = 0; + unsigned int pll_bit = 0; if (freq == rt5651->sysclk && clk_id == rt5651->sysclk_src) return 0; @@ -1453,6 +1434,7 @@ static int rt5651_set_dai_sysclk(struct snd_soc_dai *dai, break; case RT5651_SCLK_S_PLL1: reg_val |= RT5651_SCLK_SRC_PLL1; + pll_bit |= RT5651_PWR_PLL; break; case RT5651_SCLK_S_RCCLK: reg_val |= RT5651_SCLK_SRC_RCCLK; @@ -1461,6 +1443,8 @@ static int rt5651_set_dai_sysclk(struct snd_soc_dai *dai, dev_err(component->dev, "Invalid clock id (%d)\n", clk_id); return -EINVAL; } + snd_soc_component_update_bits(component, RT5651_PWR_ANLG2, + RT5651_PWR_PLL, pll_bit); snd_soc_component_update_bits(component, RT5651_GLB_CLK, RT5651_SCLK_SRC_MASK, reg_val); rt5651->sysclk = freq; |