scheduled OSS driver removal

This patch contains the scheduled removal of OSS drivers whose config
options have been removed in 2.6.23.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 526 deletions

diff --git a/sound/oss/cs4232.c b/sound/oss/cs4232.c
deleted file mode 100644
index de40e21bf279..000000000000
--- a/sound/oss/cs4232.c
+++ /dev/null
@@ -1,526 +0,0 @@
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- *	cs4232.c
- *
- * The low level driver for Crystal CS4232 based cards. The CS4232 is
- * a PnP compatible chip which contains a CS4231A codec, SB emulation,
- * a MPU401 compatible MIDI port, joystick and synthesizer and IDE CD-ROM 
- * interfaces. This is just a temporary driver until full PnP support
- * gets implemented. Just the WSS codec, FM synth and the MIDI ports are
- * supported. Other interfaces are left uninitialized.
- *
- * ifdef ...WAVEFRONT...
- * 
- *   Support is provided for initializing the WaveFront synth
- *   interface as well, which is logical device #4. Note that if
- *   you have a Tropez+ card, you probably don't need to setup
- *   the CS4232-supported MIDI interface, since it corresponds to
- *   the internal 26-pin header that's hard to access. Using this
- *   requires an additional IRQ, a resource none too plentiful in
- *   this environment. Just don't set module parameters mpuio and
- *   mpuirq, and the MIDI port will be left uninitialized. You can
- *   still use the ICS2115 hosted MIDI interface which corresponds
- *   to the 9-pin D connector on the back of the card.
- *
- * endif  ...WAVEFRONT...
- *
- * Supported chips are:
- *      CS4232
- *      CS4236
- *      CS4236B
- *
- * Note: You will need a PnP config setup to initialise some CS4232 boards
- * anyway.
- *
- * Changes
- *      John Rood               Added Bose Sound System Support.
- *      Toshio Spoor
- *	Alan Cox		Modularisation, Basic cleanups.
- *      Paul Barton-Davis	Separated MPU configuration, added
- *                                       Tropez+ (WaveFront) support
- *	Christoph Hellwig	Adapted to module_init/module_exit,
- * 					simple cleanups
- * 	Arnaldo C. de Melo	got rid of attach_uart401
- *	Bartlomiej Zolnierkiewicz
- *				Added some __init/__initdata/__exit
- *	Marcus Meissner		Added ISA PnP support.
- */
-
-#include <linux/pnp.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "sound_config.h"
-
-#include "ad1848.h"
-#include "mpu401.h"
-
-#define KEY_PORT	0x279	/* Same as LPT1 status port */
-#define CSN_NUM		0x99	/* Just a random number */
-#define INDEX_ADDRESS   0x00    /* (R0) Index Address Register */
-#define INDEX_DATA      0x01    /* (R1) Indexed Data Register */
-#define PIN_CONTROL     0x0a    /* (I10) Pin Control */
-#define ENABLE_PINS     0xc0    /* XCTRL0/XCTRL1 enable */
-
-static void CS_OUT(unsigned char a)
-{
-	outb(a, KEY_PORT);
-}
-
-#define CS_OUT2(a, b)		{CS_OUT(a);CS_OUT(b);}
-#define CS_OUT3(a, b, c)	{CS_OUT(a);CS_OUT(b);CS_OUT(c);}
-
-static int __initdata bss       = 0;
-static int mpu_base, mpu_irq;
-static int synth_base, synth_irq;
-static int mpu_detected;
-
-static int probe_cs4232_mpu(struct address_info *hw_config)
-{
-	/*
-	 *	Just write down the config values.
-	 */
-
-	mpu_base = hw_config->io_base;
-	mpu_irq = hw_config->irq;
-
-	return 1;
-}
-
-static unsigned char crystal_key[] =	/* A 32 byte magic key sequence */
-{
-	0x96, 0x35, 0x9a, 0xcd, 0xe6, 0xf3, 0x79, 0xbc,
-	0x5e, 0xaf, 0x57, 0x2b, 0x15, 0x8a, 0xc5, 0xe2,
-	0xf1, 0xf8, 0x7c, 0x3e, 0x9f, 0x4f, 0x27, 0x13,
-	0x09, 0x84, 0x42, 0xa1, 0xd0, 0x68, 0x34, 0x1a
-};
-
-static void sleep(unsigned howlong)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule_timeout(howlong);
-}
-
-static void enable_xctrl(int baseio)
-{
-        unsigned char regd;
-                
-        /*
-         * Some IBM Aptiva's have the Bose Sound System. By default
-         * the Bose Amplifier is disabled. The amplifier will be 
-         * activated, by setting the XCTRL0 and XCTRL1 bits.
-         * Volume of the monitor bose speakers/woofer, can then
-         * be set by changing the PCM volume.
-         *
-         */
-                
-        printk("cs4232: enabling Bose Sound System Amplifier.\n");
-        
-        /* Switch to Pin Control Address */                   
-        regd = inb(baseio + INDEX_ADDRESS) & 0xe0;
-        outb(((unsigned char) (PIN_CONTROL | regd)), baseio + INDEX_ADDRESS );
-        
-        /* Activate the XCTRL0 and XCTRL1 Pins */
-        regd = inb(baseio + INDEX_DATA);
-        outb(((unsigned char) (ENABLE_PINS | regd)), baseio + INDEX_DATA );
-}
-
-static int __init probe_cs4232(struct address_info *hw_config, int isapnp_configured)
-{
-	int i, n;
-	int base = hw_config->io_base, irq = hw_config->irq;
-	int dma1 = hw_config->dma, dma2 = hw_config->dma2;
-	struct resource *ports;
-
-	if (base == -1 || irq == -1 || dma1 == -1) {
-		printk(KERN_ERR "cs4232: dma, irq and io must be set.\n");
-		return 0;
-	}
-
-	/*
-	 * Verify that the I/O port range is free.
-	 */
-
-	ports = request_region(base, 4, "ad1848");
-	if (!ports) {
-		printk(KERN_ERR "cs4232.c: I/O port 0x%03x not free\n", base);
-		return 0;
-	}
-	if (ad1848_detect(ports, NULL, hw_config->osp)) {
-		goto got_it;	/* The card is already active */
-	}
-	if (isapnp_configured) {
-		printk(KERN_ERR "cs4232.c: ISA PnP configured, but not detected?\n");
-		goto fail;
-	}
-
-	/*
-	 * This version of the driver doesn't use the PnP method when configuring
-	 * the card but a simplified method defined by Crystal. This means that
-	 * just one CS4232 compatible device can exist on the system. Also this
-	 * method conflicts with possible PnP support in the OS. For this reason 
-	 * driver is just a temporary kludge.
-	 *
-	 * Also the Cirrus/Crystal method doesn't always work. Try ISA PnP first ;)
-	 */
-
-	/*
-	 * Repeat initialization few times since it doesn't always succeed in
-	 * first time.
-	 */
-
-	for (n = 0; n < 4; n++)
-	{	
-		/*
-		 *	Wake up the card by sending a 32 byte Crystal key to the key port.
-		 */
-		
-		for (i = 0; i < 32; i++)
-			CS_OUT(crystal_key[i]);
-
-		sleep(HZ / 10);
-
-		/*
-		 *	Now set the CSN (Card Select Number).
-		 */
-
-		CS_OUT2(0x06, CSN_NUM);
-
-		/*
-		 *	Then set some config bytes. First logical device 0 
-		 */
-
-		CS_OUT2(0x15, 0x00);	/* Select logical device 0 (WSS/SB/FM) */
-		CS_OUT3(0x47, (base >> 8) & 0xff, base & 0xff);	/* WSS base */
-
-		if (!request_region(0x388, 4, "FM"))	/* Not free */
-			CS_OUT3(0x48, 0x00, 0x00)	/* FM base off */
-		else {
-			release_region(0x388, 4);
-			CS_OUT3(0x48, 0x03, 0x88);	/* FM base 0x388 */
-		}
-
-		CS_OUT3(0x42, 0x00, 0x00);	/* SB base off */
-		CS_OUT2(0x22, irq);		/* SB+WSS IRQ */
-		CS_OUT2(0x2a, dma1);		/* SB+WSS DMA */
-
-		if (dma2 != -1)
-			CS_OUT2(0x25, dma2)	/* WSS DMA2 */
-		else
-			CS_OUT2(0x25, 4);	/* No WSS DMA2 */
-
-		CS_OUT2(0x33, 0x01);	/* Activate logical dev 0 */
-
-		sleep(HZ / 10);
-
-		/*
-		 * Initialize logical device 3 (MPU)
-		 */
-
-		if (mpu_base != 0 && mpu_irq != 0)
-		{
-			CS_OUT2(0x15, 0x03);	/* Select logical device 3 (MPU) */
-			CS_OUT3(0x47, (mpu_base >> 8) & 0xff, mpu_base & 0xff);	/* MPU base */
-			CS_OUT2(0x22, mpu_irq);	/* MPU IRQ */
-			CS_OUT2(0x33, 0x01);	/* Activate logical dev 3 */
-		}
-
-		if(synth_base != 0)
-		{
-		    CS_OUT2 (0x15, 0x04);	        /* logical device 4 (WaveFront) */
-		    CS_OUT3 (0x47, (synth_base >> 8) & 0xff,
-			     synth_base & 0xff);	/* base */
-		    CS_OUT2 (0x22, synth_irq);     	/* IRQ */
-		    CS_OUT2 (0x33, 0x01);	        /* Activate logical dev 4 */
-		}
-
-		/*
-		 * Finally activate the chip
-		 */
-		
-		CS_OUT(0x79);
-
-		sleep(HZ / 5);
-
-		/*
-		 * Then try to detect the codec part of the chip
-		 */
-
-		if (ad1848_detect(ports, NULL, hw_config->osp))
-			goto got_it;
-		
-		sleep(HZ);
-	}
-fail:
-	release_region(base, 4);
-	return 0;
-
-got_it:
-	if (dma2 == -1)
-		dma2 = dma1;
-
-	hw_config->slots[0] = ad1848_init("Crystal audio controller", ports,
-					  irq,
-					  dma1,		/* Playback DMA */
-					  dma2,		/* Capture DMA */
-					  0,
-					  hw_config->osp,
-					  THIS_MODULE);
-
-	if (hw_config->slots[0] != -1 &&
-		audio_devs[hw_config->slots[0]]->mixer_dev!=-1)
-	{	
-		/* Assume the mixer map is as suggested in the CS4232 databook */
-		AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE);
-		AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_CD);
-		AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_SYNTH);		/* FM synth */
-	}
-	if (mpu_base != 0 && mpu_irq != 0)
-	{
-		static struct address_info hw_config2 = {
-			0
-		};		/* Ensure it's initialized */
-
-		hw_config2.io_base = mpu_base;
-		hw_config2.irq = mpu_irq;
-		hw_config2.dma = -1;
-		hw_config2.dma2 = -1;
-		hw_config2.always_detect = 0;
-		hw_config2.name = NULL;
-		hw_config2.driver_use_1 = 0;
-		hw_config2.driver_use_2 = 0;
-		hw_config2.card_subtype = 0;
-
-		if (probe_uart401(&hw_config2, THIS_MODULE))
-		{
-			mpu_detected = 1;
-		}
-		else
-		{
-			mpu_base = mpu_irq = 0;
-		}
-		hw_config->slots[1] = hw_config2.slots[1];
-	}
-	
-	if (bss)
-        	enable_xctrl(base);
-
-	return 1;
-}
-
-static void __devexit unload_cs4232(struct address_info *hw_config)
-{
-	int base = hw_config->io_base, irq = hw_config->irq;
-	int dma1 = hw_config->dma, dma2 = hw_config->dma2;
-
-	if (dma2 == -1)
-		dma2 = dma1;
-
-	ad1848_unload(base,
-		      irq,
-		      dma1,	/* Playback DMA */
-		      dma2,	/* Capture DMA */
-		      0);
-
-	sound_unload_audiodev(hw_config->slots[0]);
-	if (mpu_base != 0 && mpu_irq != 0 && mpu_detected)
-	{
-		static struct address_info hw_config2 =
-		{
-			0
-		};		/* Ensure it's initialized */
-
-		hw_config2.io_base = mpu_base;
-		hw_config2.irq = mpu_irq;
-		hw_config2.dma = -1;
-		hw_config2.dma2 = -1;
-		hw_config2.always_detect = 0;
-		hw_config2.name = NULL;
-		hw_config2.driver_use_1 = 0;
-		hw_config2.driver_use_2 = 0;
-		hw_config2.card_subtype = 0;
-		hw_config2.slots[1] = hw_config->slots[1];
-
-		unload_uart401(&hw_config2);
-	}
-}
-
-static struct address_info cfg;
-static struct address_info cfg_mpu;
-
-static int __initdata io	= -1;
-static int __initdata irq	= -1;
-static int __initdata dma	= -1;
-static int __initdata dma2	= -1;
-static int __initdata mpuio	= -1;
-static int __initdata mpuirq	= -1;
-static int __initdata synthio	= -1;
-static int __initdata synthirq	= -1;
-static int __initdata isapnp	= 1;
-
-static unsigned int cs4232_devices;
-
-MODULE_DESCRIPTION("CS4232 based soundcard driver"); 
-MODULE_AUTHOR("Hannu Savolainen, Paul Barton-Davis"); 
-MODULE_LICENSE("GPL");
-
-module_param(io, int, 0);
-MODULE_PARM_DESC(io,"base I/O port for AD1848");
-module_param(irq, int, 0);
-MODULE_PARM_DESC(irq,"IRQ for AD1848 chip");
-module_param(dma, int, 0);
-MODULE_PARM_DESC(dma,"8 bit DMA for AD1848 chip");
-module_param(dma2, int, 0);
-MODULE_PARM_DESC(dma2,"16 bit DMA for AD1848 chip");
-module_param(mpuio, int, 0);
-MODULE_PARM_DESC(mpuio,"MPU 401 base address");
-module_param(mpuirq, int, 0);
-MODULE_PARM_DESC(mpuirq,"MPU 401 IRQ");
-module_param(synthio, int, 0);
-MODULE_PARM_DESC(synthio,"Maui WaveTable base I/O port");
-module_param(synthirq, int, 0);
-MODULE_PARM_DESC(synthirq,"Maui WaveTable IRQ");
-module_param(isapnp, bool, 0);
-MODULE_PARM_DESC(isapnp,"Enable ISAPnP probing (default 1)");
-module_param(bss, bool, 0);
-MODULE_PARM_DESC(bss,"Enable Bose Sound System Support (default 0)");
-
-/*
- *	Install a CS4232 based card. Need to have ad1848 and mpu401
- *	loaded ready.
- */
-
-/* All cs4232 based cards have the main ad1848 card either as CSC0000 or
- * CSC0100. */
-static const struct pnp_device_id cs4232_pnp_table[] = {
-	{ .id = "CSC0100", .driver_data = 0 },
-	{ .id = "CSC0000", .driver_data = 0 },
-	/* Guillemot Turtlebeach something appears to be cs4232 compatible
-	 * (untested) */
-	{ .id = "GIM0100", .driver_data = 0 },
-	{ .id = ""}
-};
-
-MODULE_DEVICE_TABLE(pnp, cs4232_pnp_table);
-
-static int __init cs4232_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
-{
-	struct address_info *isapnpcfg;
-
-	isapnpcfg = kmalloc(sizeof(*isapnpcfg),GFP_KERNEL);
-	if (!isapnpcfg)
-		return -ENOMEM;
-
-	isapnpcfg->irq		= pnp_irq(dev, 0);
-	isapnpcfg->dma		= pnp_dma(dev, 0);
-	isapnpcfg->dma2		= pnp_dma(dev, 1);
-	isapnpcfg->io_base	= pnp_port_start(dev, 0);
-	if (probe_cs4232(isapnpcfg,TRUE) == 0) {
-		printk(KERN_ERR "cs4232: ISA PnP card found, but not detected?\n");
-		kfree(isapnpcfg);
-		return -ENODEV;
-	}
-	pnp_set_drvdata(dev,isapnpcfg);
-	cs4232_devices++;
-	return 0;
-}
-
-static void __devexit cs4232_pnp_remove(struct pnp_dev *dev)
-{
-	struct address_info *cfg = pnp_get_drvdata(dev);
-	if (cfg) {
-		unload_cs4232(cfg);
-		kfree(cfg);
-	}
-}
-
-static struct pnp_driver cs4232_driver = {
-	.name		= "cs4232",
-	.id_table	= cs4232_pnp_table,
-	.probe		= cs4232_pnp_probe,
-	.remove		= __devexit_p(cs4232_pnp_remove),
-};
-
-static int __init init_cs4232(void)
-{
-#ifdef CONFIG_SOUND_WAVEFRONT_MODULE
-	if(synthio == -1)
-		printk(KERN_INFO "cs4232: set synthio and synthirq to use the wavefront facilities.\n");
-	else {
-		synth_base = synthio;
-		synth_irq =  synthirq;
-	}
-#else
-	if(synthio != -1)
-		printk(KERN_WARNING "cs4232: wavefront support not enabled in this driver.\n");
-#endif
-	cfg.irq = -1;
-
-	if (isapnp) {
-		pnp_register_driver(&cs4232_driver);
-		if (cs4232_devices)
-			return 0;
-	}
-
-	if(io==-1||irq==-1||dma==-1)
-	{
-		printk(KERN_ERR "cs4232: Must set io, irq and dma.\n");
-		return -ENODEV;
-	}
-
-	cfg.io_base = io;
-	cfg.irq = irq;
-	cfg.dma = dma;
-	cfg.dma2 = dma2;
-
-	cfg_mpu.io_base = -1;
-	cfg_mpu.irq = -1;
-
-	if (mpuio != -1 && mpuirq != -1) {
-		cfg_mpu.io_base = mpuio;
-		cfg_mpu.irq = mpuirq;
-		probe_cs4232_mpu(&cfg_mpu); /* Bug always returns 0 not OK -- AC */
-	}
-
-	if (probe_cs4232(&cfg,FALSE) == 0)
-		return -ENODEV;
-
-	return 0;
-}
-
-static void __exit cleanup_cs4232(void)
-{
-	pnp_unregister_driver(&cs4232_driver);
-        if (cfg.irq != -1)
-		unload_cs4232(&cfg); /* Unloads global MPU as well, if needed */
-}
-
-module_init(init_cs4232);
-module_exit(cleanup_cs4232);
-
-#ifndef MODULE
-static int __init setup_cs4232(char *str)
-{
-	/* io, irq, dma, dma2 mpuio, mpuirq*/
-	int ints[7];
-
-	/* If we have isapnp cards, no need for options */
-	pnp_register_driver(&cs4232_driver);
-	if (cs4232_devices)
-		return 1;
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-	
-	io	= ints[1];
-	irq	= ints[2];
-	dma	= ints[3];
-	dma2	= ints[4];
-	mpuio	= ints[5];
-	mpuirq	= ints[6];
-
-	return 1;
-}
-
-__setup("cs4232=", setup_cs4232);
-#endif