summaryrefslogtreecommitdiffstats
path: root/sound/firewire
diff options
context:
space:
mode:
authorClemens Ladisch <clemens@ladisch.de>2011-09-04 22:15:54 +0200
committerClemens Ladisch <clemens@ladisch.de>2013-10-20 22:07:57 +0200
commit54e72f0ba31e1562e6d6277d0e4d39a7004f814d (patch)
tree07c839b5a95f23c322de084d56aa330e7579741e /sound/firewire
parent20b65dd040ce38e2bc0fa3cae13b954c865b61fe (diff)
downloadlinux-54e72f0ba31e1562e6d6277d0e4d39a7004f814d.tar.bz2
ALSA: dice: reorganize interface definitions
Move the DICE interface symbols into a separate header file, and add more documentation. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Diffstat (limited to 'sound/firewire')
-rw-r--r--sound/firewire/dice-interface.h371
-rw-r--r--sound/firewire/dice.c209
2 files changed, 373 insertions, 207 deletions
diff --git a/sound/firewire/dice-interface.h b/sound/firewire/dice-interface.h
new file mode 100644
index 000000000000..af916b9d07a4
--- /dev/null
+++ b/sound/firewire/dice-interface.h
@@ -0,0 +1,371 @@
+#ifndef SOUND_FIREWIRE_DICE_INTERFACE_H_INCLUDED
+#define SOUND_FIREWIRE_DICE_INTERFACE_H_INCLUDED
+
+/*
+ * DICE device interface definitions
+ */
+
+/*
+ * Generally, all registers can be read like memory, i.e., with quadlet read or
+ * block read transactions with any alignment or length. Writes are not
+ * allowed except where noted; quadlet-sized registers must be written with
+ * a quadlet write transaction.
+ *
+ * All values are in big endian. The DICE firmware runs on a little-endian CPU
+ * and just byte-swaps _all_ quadlets on the bus, so values without endianness
+ * (e.g. strings) get scrambled and must be byte-swapped again by the driver.
+ */
+
+/*
+ * Streaming is handled by the "DICE driver" interface. Its registers are
+ * located in this private address space.
+ */
+#define DICE_PRIVATE_SPACE 0xffffe0000000uLL
+
+/*
+ * The registers are organized in several sections, which are organized
+ * separately to allow them to be extended individually. Whether a register is
+ * supported can be detected by checking its offset against its section's size.
+ *
+ * The section offset values are relative to DICE_PRIVATE_SPACE; the offset/
+ * size values are measured in quadlets. Read-only.
+ */
+#define DICE_GLOBAL_OFFSET 0x00
+#define DICE_GLOBAL_SIZE 0x04
+#define DICE_TX_OFFSET 0x08
+#define DICE_TX_SIZE 0x0c
+#define DICE_RX_OFFSET 0x10
+#define DICE_RX_SIZE 0x14
+#define DICE_EXT_SYNC_OFFSET 0x18
+#define DICE_EXT_SYNC_SIZE 0x1c
+#define DICE_UNUSED2_OFFSET 0x20
+#define DICE_UNUSED2_SIZE 0x24
+
+/*
+ * Global settings.
+ */
+
+/*
+ * Stores the full 64-bit address (node ID and offset in the node's address
+ * space) where the device will send notifications. Must be changed with
+ * a compare/swap transaction by the owner. This register is automatically
+ * cleared on a bus reset.
+ */
+#define GLOBAL_OWNER 0x000
+#define OWNER_NO_OWNER 0xffff000000000000uLL
+#define OWNER_NODE_SHIFT 48
+
+/*
+ * A bitmask with asynchronous events; read-only. When any event(s) happen,
+ * the bits of previous events are cleared, and the value of this register is
+ * also written to the address stored in the owner register.
+ */
+#define GLOBAL_NOTIFICATION 0x008
+/* Some registers in the Rx/Tx sections may have changed. */
+#define NOTIFY_RX_CFG_CHG 0x00000001
+#define NOTIFY_TX_CFG_CHG 0x00000002
+/* Lock status of the current clock source may have changed. */
+#define NOTIFY_LOCK_CHG 0x00000010
+/* Write to the clock select register has been finished. */
+#define NOTIFY_CLOCK_ACCEPTED 0x00000020
+/* Lock status of some clock source has changed. */
+#define NOTIFY_EXT_STATUS 0x00000040
+/* Other bits may be used for device-specific events. */
+
+/*
+ * A name that can be customized for each device; read/write. Padded with zero
+ * bytes. Quadlets are byte-swapped. The encoding is whatever the host driver
+ * happens to be using.
+ */
+#define GLOBAL_NICK_NAME 0x00c
+#define NICK_NAME_SIZE 64
+
+/*
+ * The current sample rate and clock source; read/write. Whether a clock
+ * source or sample rate is supported is device-specific; the internal clock
+ * source is always available. Low/mid/high = up to 48/96/192 kHz. This
+ * register can be changed even while streams are running.
+ */
+#define GLOBAL_CLOCK_SELECT 0x04c
+#define CLOCK_SOURCE_MASK 0x000000ff
+#define CLOCK_SOURCE_AES1 0x00000000
+#define CLOCK_SOURCE_AES2 0x00000001
+#define CLOCK_SOURCE_AES3 0x00000002
+#define CLOCK_SOURCE_AES4 0x00000003
+#define CLOCK_SOURCE_AES_ANY 0x00000004
+#define CLOCK_SOURCE_ADAT 0x00000005
+#define CLOCK_SOURCE_TDIF 0x00000006
+#define CLOCK_SOURCE_WC 0x00000007
+#define CLOCK_SOURCE_ARX1 0x00000008
+#define CLOCK_SOURCE_ARX2 0x00000009
+#define CLOCK_SOURCE_ARX3 0x0000000a
+#define CLOCK_SOURCE_ARX4 0x0000000b
+#define CLOCK_SOURCE_INTERNAL 0x0000000c
+#define CLOCK_RATE_MASK 0x0000ff00
+#define CLOCK_RATE_32000 0x00000000
+#define CLOCK_RATE_44100 0x00000100
+#define CLOCK_RATE_48000 0x00000200
+#define CLOCK_RATE_88200 0x00000300
+#define CLOCK_RATE_96000 0x00000400
+#define CLOCK_RATE_176400 0x00000500
+#define CLOCK_RATE_192000 0x00000600
+#define CLOCK_RATE_ANY_LOW 0x00000700
+#define CLOCK_RATE_ANY_MID 0x00000800
+#define CLOCK_RATE_ANY_HIGH 0x00000900
+#define CLOCK_RATE_NONE 0x00000a00
+#define CLOCK_RATE_SHIFT 8
+
+/*
+ * Enable streaming; read/write. Writing a non-zero value (re)starts all
+ * streams that have a valid iso channel set; zero stops all streams. The
+ * streams' parameters must be configured before starting. This register is
+ * automatically cleared on a bus reset.
+ */
+#define GLOBAL_ENABLE 0x050
+
+/*
+ * Status of the sample clock; read-only.
+ */
+#define GLOBAL_STATUS 0x054
+/* The current clock source is locked. */
+#define STATUS_SOURCE_LOCKED 0x00000001
+/* The actual sample rate; CLOCK_RATE_32000-_192000 or _NONE. */
+#define STATUS_NOMINAL_RATE_MASK 0x0000ff00
+
+/*
+ * Status of all clock sources; read-only.
+ */
+#define GLOBAL_EXTENDED_STATUS 0x058
+/*
+ * The _LOCKED bits always show the current status; any change generates
+ * a notification.
+ */
+#define EXT_STATUS_AES1_LOCKED 0x00000001
+#define EXT_STATUS_AES2_LOCKED 0x00000002
+#define EXT_STATUS_AES3_LOCKED 0x00000004
+#define EXT_STATUS_AES4_LOCKED 0x00000008
+#define EXT_STATUS_ADAT_LOCKED 0x00000010
+#define EXT_STATUS_TDIF_LOCKED 0x00000020
+#define EXT_STATUS_ARX1_LOCKED 0x00000040
+#define EXT_STATUS_ARX2_LOCKED 0x00000080
+#define EXT_STATUS_ARX3_LOCKED 0x00000100
+#define EXT_STATUS_ARX4_LOCKED 0x00000200
+#define EXT_STATUS_WC_LOCKED 0x00000400
+/*
+ * The _SLIP bits do not generate notifications; a set bit indicates that an
+ * error occurred since the last time when this register was read with
+ * a quadlet read transaction.
+ */
+#define EXT_STATUS_AES1_SLIP 0x00010000
+#define EXT_STATUS_AES2_SLIP 0x00020000
+#define EXT_STATUS_AES3_SLIP 0x00040000
+#define EXT_STATUS_AES4_SLIP 0x00080000
+#define EXT_STATUS_ADAT_SLIP 0x00100000
+#define EXT_STATUS_TDIF_SLIP 0x00200000
+#define EXT_STATUS_ARX1_SLIP 0x00400000
+#define EXT_STATUS_ARX2_SLIP 0x00800000
+#define EXT_STATUS_ARX3_SLIP 0x01000000
+#define EXT_STATUS_ARX4_SLIP 0x02000000
+#define EXT_STATUS_WC_SLIP 0x04000000
+
+/*
+ * The measured rate of the current clock source, in Hz; read-only.
+ */
+#define GLOBAL_SAMPLE_RATE 0x05c
+
+/*
+ * The version of the DICE driver specification that this device conforms to;
+ * read-only.
+ */
+#define GLOBAL_VERSION 0x060
+
+/* Some old firmware versions do not have the following global registers: */
+
+/*
+ * Supported sample rates and clock sources; read-only.
+ */
+#define GLOBAL_CLOCK_CAPABILITIES 0x064
+#define CLOCK_CAP_RATE_32000 0x00000001
+#define CLOCK_CAP_RATE_44100 0x00000002
+#define CLOCK_CAP_RATE_48000 0x00000004
+#define CLOCK_CAP_RATE_88200 0x00000008
+#define CLOCK_CAP_RATE_96000 0x00000010
+#define CLOCK_CAP_RATE_176400 0x00000020
+#define CLOCK_CAP_RATE_192000 0x00000040
+#define CLOCK_CAP_SOURCE_AES1 0x00010000
+#define CLOCK_CAP_SOURCE_AES2 0x00020000
+#define CLOCK_CAP_SOURCE_AES3 0x00040000
+#define CLOCK_CAP_SOURCE_AES4 0x00080000
+#define CLOCK_CAP_SOURCE_AES_ANY 0x00100000
+#define CLOCK_CAP_SOURCE_ADAT 0x00200000
+#define CLOCK_CAP_SOURCE_TDIF 0x00400000
+#define CLOCK_CAP_SOURCE_WC 0x00800000
+#define CLOCK_CAP_SOURCE_ARX1 0x01000000
+#define CLOCK_CAP_SOURCE_ARX2 0x02000000
+#define CLOCK_CAP_SOURCE_ARX3 0x04000000
+#define CLOCK_CAP_SOURCE_ARX4 0x08000000
+#define CLOCK_CAP_SOURCE_INTERNAL 0x10000000
+
+/*
+ * Names of all clock sources; read-only. Quadlets are byte-swapped. Names
+ * are separated with one backslash, the list is terminated with two
+ * backslashes. Unused clock sources are included.
+ */
+#define GLOBAL_CLOCK_SOURCE_NAMES 0x068
+#define CLOCK_SOURCE_NAMES_SIZE 256
+
+/*
+ * Capture stream settings. This section includes the number/size registers
+ * and the registers of all streams.
+ */
+
+/*
+ * The number of supported capture streams; read-only.
+ */
+#define TX_NUMBER 0x000
+
+/*
+ * The size of one stream's register block, in quadlets; read-only. The
+ * registers of the first stream follow immediately afterwards; the registers
+ * of the following streams are offset by this register's value.
+ */
+#define TX_SIZE 0x004
+
+/*
+ * The isochronous channel number on which packets are sent, or -1 if the
+ * stream is not to be used; read/write.
+ */
+#define TX_ISOCHRONOUS 0x008
+
+/*
+ * The number of audio channels; read-only. There will be one quadlet per
+ * channel; the first channel is the first quadlet in a data block.
+ */
+#define TX_NUMBER_AUDIO 0x00c
+
+/*
+ * The number of MIDI ports, 0-8; read-only. If > 0, there will be one
+ * additional quadlet in each data block, following the audio quadlets.
+ */
+#define TX_NUMBER_MIDI 0x010
+
+/*
+ * The speed at which the packets are sent, SCODE_100-_400; read/write.
+ */
+#define TX_SPEED 0x014
+
+/*
+ * Names of all audio channels; read-only. Quadlets are byte-swapped. Names
+ * are separated with one backslash, the list is terminated with two
+ * backslashes.
+ */
+#define TX_NAMES 0x018
+#define TX_NAMES_SIZE 256
+
+/*
+ * Audio IEC60958 capabilities; read-only. Bitmask with one bit per audio
+ * channel.
+ */
+#define TX_AC3_CAPABILITIES 0x118
+
+/*
+ * Send audio data with IEC60958 label; read/write. Bitmask with one bit per
+ * audio channel. This register can be changed even while the stream is
+ * running.
+ */
+#define TX_AC3_ENABLE 0x11c
+
+/*
+ * Playback stream settings. This section includes the number/size registers
+ * and the registers of all streams.
+ */
+
+/*
+ * The number of supported playback streams; read-only.
+ */
+#define RX_NUMBER 0x000
+
+/*
+ * The size of one stream's register block, in quadlets; read-only. The
+ * registers of the first stream follow immediately afterwards; the registers
+ * of the following streams are offset by this register's value.
+ */
+#define RX_SIZE 0x004
+
+/*
+ * The isochronous channel number on which packets are received, or -1 if the
+ * stream is not to be used; read/write.
+ */
+#define RX_ISOCHRONOUS 0x008
+
+/*
+ * Index of first quadlet to be interpreted; read/write. If > 0, that many
+ * quadlets at the beginning of each data block will be ignored, and all the
+ * audio and MIDI quadlets will follow.
+ */
+#define RX_SEQ_START 0x00c
+
+/*
+ * The number of audio channels; read-only. There will be one quadlet per
+ * channel.
+ */
+#define RX_NUMBER_AUDIO 0x010
+
+/*
+ * The number of MIDI ports, 0-8; read-only. If > 0, there will be one
+ * additional quadlet in each data block, following the audio quadlets.
+ */
+#define RX_NUMBER_MIDI 0x014
+
+/*
+ * Names of all audio channels; read-only. Quadlets are byte-swapped. Names
+ * are separated with one backslash, the list is terminated with two
+ * backslashes.
+ */
+#define RX_NAMES 0x018
+#define RX_NAMES_SIZE 256
+
+/*
+ * Audio IEC60958 capabilities; read-only. Bitmask with one bit per audio
+ * channel.
+ */
+#define RX_AC3_CAPABILITIES 0x118
+
+/*
+ * Receive audio data with IEC60958 label; read/write. Bitmask with one bit
+ * per audio channel. This register can be changed even while the stream is
+ * running.
+ */
+#define RX_AC3_ENABLE 0x11c
+
+/*
+ * Extended synchronization information.
+ * This section can be read completely with a block read request.
+ */
+
+/*
+ * Current clock source; read-only.
+ */
+#define EXT_SYNC_CLOCK_SOURCE 0x000
+
+/*
+ * Clock source is locked (boolean); read-only.
+ */
+#define EXT_SYNC_LOCKED 0x004
+
+/*
+ * Current sample rate (CLOCK_RATE_* >> CLOCK_RATE_SHIFT), _32000-_192000 or
+ * _NONE; read-only.
+ */
+#define EXT_SYNC_RATE 0x008
+
+/*
+ * ADAT user data bits; read-only.
+ */
+#define EXT_SYNC_ADAT_USER_DATA 0x00c
+/* The data bits, if available. */
+#define ADAT_USER_DATA_MASK 0x0f
+/* The data bits are not available. */
+#define ADAT_USER_DATA_NO_DATA 0x10
+
+#endif
diff --git a/sound/firewire/dice.c b/sound/firewire/dice.c
index 3591aebd1bb7..1da1ddefd6a8 100644
--- a/sound/firewire/dice.c
+++ b/sound/firewire/dice.c
@@ -26,212 +26,7 @@
#include "amdtp.h"
#include "iso-resources.h"
#include "lib.h"
-
-#define DICE_PRIVATE_SPACE 0xffffe0000000uLL
-
-/* offset from DICE_PRIVATE_SPACE; offsets and sizes in quadlets */
-#define DICE_GLOBAL_OFFSET 0x00
-#define DICE_GLOBAL_SIZE 0x04
-#define DICE_TX_OFFSET 0x08
-#define DICE_TX_SIZE 0x0c
-#define DICE_RX_OFFSET 0x10
-#define DICE_RX_SIZE 0x14
-
-/* pointed to by DICE_GLOBAL_OFFSET */
-#define GLOBAL_OWNER 0x000
-#define OWNER_NO_OWNER 0xffff000000000000uLL
-#define OWNER_NODE_SHIFT 48
-#define GLOBAL_NOTIFICATION 0x008
-#define NOTIFY_RX_CFG_CHG 0x00000001
-#define NOTIFY_TX_CFG_CHG 0x00000002
-#define NOTIFY_DUP_ISOC 0x00000004
-#define NOTIFY_BW_ERR 0x00000008
-#define NOTIFY_LOCK_CHG 0x00000010
-#define NOTIFY_CLOCK_ACCEPTED 0x00000020
-#define NOTIFY_INTERFACE_CHG 0x00000040
-#define NOTIFY_MESSAGE 0x00100000
-#define GLOBAL_NICK_NAME 0x00c
-#define NICK_NAME_SIZE 64
-#define GLOBAL_CLOCK_SELECT 0x04c
-#define CLOCK_SOURCE_MASK 0x000000ff
-#define CLOCK_SOURCE_AES1 0x00000000
-#define CLOCK_SOURCE_AES2 0x00000001
-#define CLOCK_SOURCE_AES3 0x00000002
-#define CLOCK_SOURCE_AES4 0x00000003
-#define CLOCK_SOURCE_AES_ANY 0x00000004
-#define CLOCK_SOURCE_ADAT 0x00000005
-#define CLOCK_SOURCE_TDIF 0x00000006
-#define CLOCK_SOURCE_WC 0x00000007
-#define CLOCK_SOURCE_ARX1 0x00000008
-#define CLOCK_SOURCE_ARX2 0x00000009
-#define CLOCK_SOURCE_ARX3 0x0000000a
-#define CLOCK_SOURCE_ARX4 0x0000000b
-#define CLOCK_SOURCE_INTERNAL 0x0000000c
-#define CLOCK_RATE_MASK 0x0000ff00
-#define CLOCK_RATE_32000 0x00000000
-#define CLOCK_RATE_44100 0x00000100
-#define CLOCK_RATE_48000 0x00000200
-#define CLOCK_RATE_88200 0x00000300
-#define CLOCK_RATE_96000 0x00000400
-#define CLOCK_RATE_176400 0x00000500
-#define CLOCK_RATE_192000 0x00000600
-#define CLOCK_RATE_ANY_LOW 0x00000700
-#define CLOCK_RATE_ANY_MID 0x00000800
-#define CLOCK_RATE_ANY_HIGH 0x00000900
-#define CLOCK_RATE_NONE 0x00000a00
-#define CLOCK_RATE_SHIFT 8
-#define GLOBAL_ENABLE 0x050
-#define ENABLE 0x00000001
-#define GLOBAL_STATUS 0x054
-#define STATUS_SOURCE_LOCKED 0x00000001
-#define STATUS_RATE_CONFLICT 0x00000002
-#define STATUS_NOMINAL_RATE_MASK 0x0000ff00
-#define GLOBAL_EXTENDED_STATUS 0x058
-#define EXT_STATUS_AES1_LOCKED 0x00000001
-#define EXT_STATUS_AES2_LOCKED 0x00000002
-#define EXT_STATUS_AES3_LOCKED 0x00000004
-#define EXT_STATUS_AES4_LOCKED 0x00000008
-#define EXT_STATUS_ADAT_LOCKED 0x00000010
-#define EXT_STATUS_TDIF_LOCKED 0x00000020
-#define EXT_STATUS_ARX1_LOCKED 0x00000040
-#define EXT_STATUS_ARX2_LOCKED 0x00000080
-#define EXT_STATUS_ARX3_LOCKED 0x00000100
-#define EXT_STATUS_ARX4_LOCKED 0x00000200
-#define EXT_STATUS_WC_LOCKED 0x00000400
-#define EXT_STATUS_AES1_SLIP 0x00010000
-#define EXT_STATUS_AES2_SLIP 0x00020000
-#define EXT_STATUS_AES3_SLIP 0x00040000
-#define EXT_STATUS_AES4_SLIP 0x00080000
-#define EXT_STATUS_ADAT_SLIP 0x00100000
-#define EXT_STATUS_TDIF_SLIP 0x00200000
-#define EXT_STATUS_ARX1_SLIP 0x00400000
-#define EXT_STATUS_ARX2_SLIP 0x00800000
-#define EXT_STATUS_ARX3_SLIP 0x01000000
-#define EXT_STATUS_ARX4_SLIP 0x02000000
-#define EXT_STATUS_WC_SLIP 0x04000000
-#define GLOBAL_SAMPLE_RATE 0x05c
-#define GLOBAL_VERSION 0x060
-#define GLOBAL_CLOCK_CAPABILITIES 0x064
-#define CLOCK_CAP_RATE_32000 0x00000001
-#define CLOCK_CAP_RATE_44100 0x00000002
-#define CLOCK_CAP_RATE_48000 0x00000004
-#define CLOCK_CAP_RATE_88200 0x00000008
-#define CLOCK_CAP_RATE_96000 0x00000010
-#define CLOCK_CAP_RATE_176400 0x00000020
-#define CLOCK_CAP_RATE_192000 0x00000040
-#define CLOCK_CAP_SOURCE_AES1 0x00010000
-#define CLOCK_CAP_SOURCE_AES2 0x00020000
-#define CLOCK_CAP_SOURCE_AES3 0x00040000
-#define CLOCK_CAP_SOURCE_AES4 0x00080000
-#define CLOCK_CAP_SOURCE_AES_ANY 0x00100000
-#define CLOCK_CAP_SOURCE_ADAT 0x00200000
-#define CLOCK_CAP_SOURCE_TDIF 0x00400000
-#define CLOCK_CAP_SOURCE_WC 0x00800000
-#define CLOCK_CAP_SOURCE_ARX1 0x01000000
-#define CLOCK_CAP_SOURCE_ARX2 0x02000000
-#define CLOCK_CAP_SOURCE_ARX3 0x04000000
-#define CLOCK_CAP_SOURCE_ARX4 0x08000000
-#define CLOCK_CAP_SOURCE_INTERNAL 0x10000000
-#define GLOBAL_CLOCK_SOURCE_NAMES 0x068
-#define CLOCK_SOURCE_NAMES_SIZE 256
-
-/* pointed to by DICE_TX_OFFSET */
-#define TX_NUMBER 0x000
-#define TX_SIZE 0x004
-/* repeated TX_NUMBER times, offset by TX_SIZE quadlets */
-#define TX_ISOCHRONOUS 0x008
-#define TX_NUMBER_AUDIO 0x00c
-#define TX_NUMBER_MIDI 0x010
-#define TX_SPEED 0x014
-#define TX_NAMES 0x018
-#define TX_NAMES_SIZE 256
-#define TX_AC3_CAPABILITIES 0x118
-#define TX_AC3_ENABLE 0x11c
-
-/* pointed to by DICE_RX_OFFSET */
-#define RX_NUMBER 0x000
-#define RX_SIZE 0x004
-/* repeated RX_NUMBER times, offset by RX_SIZE quadlets */
-#define RX_ISOCHRONOUS 0x008
-#define RX_SEQ_START 0x00c
-#define RX_NUMBER_AUDIO 0x010
-#define RX_NUMBER_MIDI 0x014
-#define RX_NAMES 0x018
-#define RX_NAMES_SIZE 256
-#define RX_AC3_CAPABILITIES 0x118
-#define RX_AC3_ENABLE 0x11c
-
-
-#define FIRMWARE_LOAD_SPACE 0xffffe0100000uLL
-
-/* offset from FIRMWARE_LOAD_SPACE */
-#define FIRMWARE_VERSION 0x000
-#define FIRMWARE_OPCODE 0x004
-#define OPCODE_MASK 0x00000fff
-#define OPCODE_GET_IMAGE_DESC 0x00000000
-#define OPCODE_DELETE_IMAGE 0x00000001
-#define OPCODE_CREATE_IMAGE 0x00000002
-#define OPCODE_UPLOAD 0x00000003
-#define OPCODE_UPLOAD_STAT 0x00000004
-#define OPCODE_RESET_IMAGE 0x00000005
-#define OPCODE_TEST_ACTION 0x00000006
-#define OPCODE_GET_RUNNING_IMAGE_VINFO 0x0000000a
-#define OPCODE_EXECUTE 0x80000000
-#define FIRMWARE_RETURN_STATUS 0x008
-#define FIRMWARE_PROGRESS 0x00c
-#define PROGRESS_CURR_MASK 0x00000fff
-#define PROGRESS_MAX_MASK 0x00fff000
-#define PROGRESS_TOUT_MASK 0x0f000000
-#define PROGRESS_FLAG 0x80000000
-#define FIRMWARE_CAPABILITIES 0x010
-#define FL_CAP_AUTOERASE 0x00000001
-#define FL_CAP_PROGRESS 0x00000002
-#define FIRMWARE_DATA 0x02c
-#define TEST_CMD_POKE 0x00000001
-#define TEST_CMD_PEEK 0x00000002
-#define CMD_GET_AVS_CNT 0x00000003
-#define CMD_CLR_AVS_CNT 0x00000004
-#define CMD_SET_MODE 0x00000005
-#define CMD_SET_MIDIBP 0x00000006
-#define CMD_GET_AVSPHASE 0x00000007
-#define CMD_ENABLE_BNC_SYNC 0x00000008
-#define CMD_PULSE_BNC_SYNC 0x00000009
-#define CMD_EMUL_SLOW_CMD 0x0000000a
-#define FIRMWARE_TEST_DELAY 0xfd8
-#define FIRMWARE_TEST_BUF 0xfdc
-
-
-/* EAP */
-#define EAP_PRIVATE_SPACE 0xffffe0200000uLL
-
-#define EAP_CAPABILITY_OFFSET 0x000
-#define EAP_CAPABILITY_SIZE 0x004
-/* ... */
-
-#define EAP_ROUTER_CAPS 0x000
-#define ROUTER_EXPOSED 0x00000001
-#define ROUTER_READ_ONLY 0x00000002
-#define ROUTER_FLASH 0x00000004
-#define MAX_ROUTES_MASK 0xffff0000
-#define EAP_MIXER_CAPS 0x004
-#define MIXER_EXPOSED 0x00000001
-#define MIXER_READ_ONLY 0x00000002
-#define MIXER_FLASH 0x00000004
-#define MIXER_IN_DEV_MASK 0x000000f0
-#define MIXER_OUT_DEV_MASK 0x00000f00
-#define MIXER_INPUTS_MASK 0x00ff0000
-#define MIXER_OUTPUTS_MASK 0xff000000
-#define EAP_GENERAL_CAPS 0x008
-#define GENERAL_STREAM_CONFIG 0x00000001
-#define GENERAL_FLASH 0x00000002
-#define GENERAL_PEAK 0x00000004
-#define GENERAL_MAX_TX_STREAMS_MASK 0x000000f0
-#define GENERAL_MAX_RX_STREAMS_MASK 0x00000f00
-#define GENERAL_STREAM_CONFIG_FLASH 0x00001000
-#define GENERAL_CHIP_MASK 0x00ff0000
-#define GENERAL_CHIP_DICE_II 0x00000000
-#define GENERAL_CHIP_DICE_MINI 0x00010000
-#define GENERAL_CHIP_DICE_JR 0x00020000
+#include "dice-interface.h"
struct dice {
@@ -479,7 +274,7 @@ static int dice_enable_set(struct dice *dice)
__be32 value;
int rcode, err, errors = 0;
- value = cpu_to_be32(ENABLE);
+ value = cpu_to_be32(1);
for (;;) {
rcode = fw_run_transaction(device->card,
TCODE_WRITE_QUADLET_REQUEST,