Merge tag 'sound-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "As the diffstat scatters over the tree, we've got many tree-wide small
  changes, but also got quite a few intrusive changes in the core side.
  The only ABI-visible core change is the new rawmidi framing mode
  support while others are kernel-internal, mostly code refactoring
  and/or nice improvements.

  Here are some highlights:

  Core:
   - A new framing access mode for rawmidi to get timestamps
   - Cleanup / refactoring of buffer memory management helper code
   - Support for automatic negotiation of ASoC DAI formats
   - Revival of software suspend for PCM and control core, as a
     preliminary work for PCI BAR rescan support

  ASoC:
   - Accessory detection support for several Qualcomm parts
   - Support for IEC958 control with hdmi-codec
   - Merging of Tegra machine drivers into a single driver
   - Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
     i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
     Quinary MI2S, Texas Instruments TAS2505

  USB-audio:
   - Reduction of latency at playback start
   - Code cleanup / fixes of usx2y driver
   - Scarlett2 mixer code fixes and enhancements
   - Quirks for Ozone and Denon devices

  HD-audio:
   - A few quirks for HP and ASUS machines
   - Display power management fixes

  Others:
   - FireWire code refactoring and enhancements
   - Tree-wide trivial coding-style fixes"

* tag 'sound-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
  ALSA: usb-audio: scarlett2: Fix for loop increment in scarlett2_usb_get_config
  ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 630 G8
  ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G8
  ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 450 G8
  ALSA: hda/realtek - Add ALC285 HP init procedure
  ALSA: hda/realtek - Add type for ALC287
  ALSA: scarlett2: Fix scarlett2_*_ctl_put() return values again
  ALSA: scarlett2: Fix pad count for 18i8 Gen 3
  ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 830 G8 Notebook PC
  ALSA: firewire-lib: Fix 'amdtp_domain_start()' when no AMDTP_OUT_STREAM stream is found
  ASoC: qcom: lpass-cpu: mark IRQ_CLEAR register as volatile and readable
  ALSA: hda: Release codec display power during shutdown/reboot
  ALSA: hda: Release controller display power during shutdown/reboot
  ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, too
  ASoC: fsl: remove unnecessary oom message
  ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
  ASoC: tlv320aic32x4: add support for TAS2505
  ASoC: tlv320aic32x4: add type to device private data struct
  ASoC: tegra30: ahub: Use devm_platform_get_and_ioremap_resource()
  ASoC: tegra: tegra210_admaif: Use devm_platform_get_and_ioremap_resource()
  ...

1 files changed, 132 insertions, 42 deletions

diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
index f9a211cc1f2c..7a1b816f67cc 100644
--- a/sound/core/pcm_iec958.c
+++ b/sound/core/pcm_iec958.c
@@ -9,41 +9,85 @@
 #include <sound/pcm_params.h>
 #include <sound/pcm_iec958.h>
 
-static int create_iec958_consumer(uint rate, uint sample_width,
-				  u8 *cs, size_t len)
+/**
+ * snd_pcm_create_iec958_consumer_default - create default consumer format IEC958 channel status
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Create the consumer format channel status data in @cs of maximum size
+ * @len. When relevant, the configuration-dependant bits will be set as
+ * unspecified.
+ *
+ * Drivers should then call einter snd_pcm_fill_iec958_consumer() or
+ * snd_pcm_fill_iec958_consumer_hw_params() to replace these unspecified
+ * bits by their actual values.
+ *
+ * Drivers may wish to tweak the contents of the buffer after creation.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
 {
-	unsigned int fs, ws;
-
 	if (len < 4)
 		return -EINVAL;
 
-	switch (rate) {
-	case 32000:
-		fs = IEC958_AES3_CON_FS_32000;
-		break;
-	case 44100:
-		fs = IEC958_AES3_CON_FS_44100;
-		break;
-	case 48000:
-		fs = IEC958_AES3_CON_FS_48000;
-		break;
-	case 88200:
-		fs = IEC958_AES3_CON_FS_88200;
-		break;
-	case 96000:
-		fs = IEC958_AES3_CON_FS_96000;
-		break;
-	case 176400:
-		fs = IEC958_AES3_CON_FS_176400;
-		break;
-	case 192000:
-		fs = IEC958_AES3_CON_FS_192000;
-		break;
-	default:
+	memset(cs, 0, len);
+
+	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
+	cs[1] = IEC958_AES1_CON_GENERAL;
+	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
+	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
+
+	if (len > 4)
+		cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(snd_pcm_create_iec958_consumer_default);
+
+static int fill_iec958_consumer(uint rate, uint sample_width,
+				u8 *cs, size_t len)
+{
+	if (len < 4)
 		return -EINVAL;
+
+	if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
+		unsigned int fs;
+
+		switch (rate) {
+			case 32000:
+				fs = IEC958_AES3_CON_FS_32000;
+				break;
+			case 44100:
+				fs = IEC958_AES3_CON_FS_44100;
+				break;
+			case 48000:
+				fs = IEC958_AES3_CON_FS_48000;
+				break;
+			case 88200:
+				fs = IEC958_AES3_CON_FS_88200;
+				break;
+			case 96000:
+				fs = IEC958_AES3_CON_FS_96000;
+				break;
+			case 176400:
+				fs = IEC958_AES3_CON_FS_176400;
+				break;
+			case 192000:
+				fs = IEC958_AES3_CON_FS_192000;
+				break;
+			default:
+				return -EINVAL;
+		}
+
+		cs[3] &= ~IEC958_AES3_CON_FS;
+		cs[3] |= fs;
 	}
 
-	if (len > 4) {
+	if (len > 4 &&
+	    (cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
+		unsigned int ws;
+
 		switch (sample_width) {
 		case 16:
 			ws = IEC958_AES4_CON_WORDLEN_20_16;
@@ -64,20 +108,57 @@ static int create_iec958_consumer(uint rate, uint sample_width,
 		default:
 			return -EINVAL;
 		}
-	}
 
-	memset(cs, 0, len);
+		cs[4] &= ~IEC958_AES4_CON_WORDLEN;
+		cs[4] |= ws;
+	}
 
-	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
-	cs[1] = IEC958_AES1_CON_GENERAL;
-	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
-	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
+	return len;
+}
 
-	if (len > 4)
-		cs[4] = ws;
+/**
+ * snd_pcm_fill_iec958_consumer - Fill consumer format IEC958 channel status
+ * @runtime: pcm runtime structure with ->rate filled in
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Fill the unspecified bits in an IEC958 status bits array using the
+ * parameters of the PCM runtime @runtime.
+ *
+ * Drivers may wish to tweak the contents of the buffer after its been
+ * filled.
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
+				 u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(runtime->rate,
+				    snd_pcm_format_width(runtime->format),
+				    cs, len);
+}
+EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer);
 
-	return len;
+/**
+ * snd_pcm_fill_iec958_consumer_hw_params - Fill consumer format IEC958 channel status
+ * @params: the hw_params instance for extracting rate and sample format
+ * @cs: channel status buffer, at least four bytes
+ * @len: length of channel status buffer
+ *
+ * Fill the unspecified bits in an IEC958 status bits array using the
+ * parameters of the PCM hardware parameters @params.
+ *
+ * Drivers may wish to tweak the contents of the buffer after its been
+ * filled..
+ *
+ * Returns: length of buffer, or negative error code if something failed.
+ */
+int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					   u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
 }
+EXPORT_SYMBOL_GPL(snd_pcm_fill_iec958_consumer_hw_params);
 
 /**
  * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
@@ -95,9 +176,13 @@ static int create_iec958_consumer(uint rate, uint sample_width,
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len)
 {
-	return create_iec958_consumer(runtime->rate,
-				      snd_pcm_format_width(runtime->format),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return snd_pcm_fill_iec958_consumer(runtime, cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 
@@ -117,7 +202,12 @@ EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
 					     u8 *cs, size_t len)
 {
-	return create_iec958_consumer(params_rate(params), params_width(params),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);