diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /sound/Kconfig | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'sound/Kconfig')
-rw-r--r-- | sound/Kconfig | 89 |
1 files changed, 89 insertions, 0 deletions
diff --git a/sound/Kconfig b/sound/Kconfig new file mode 100644 index 000000000000..047d59ea0573 --- /dev/null +++ b/sound/Kconfig @@ -0,0 +1,89 @@ +# sound/Config.in +# + +menu "Sound" + +config SOUND + tristate "Sound card support" + help + If you have a sound card in your computer, i.e. if it can say more + than an occasional beep, say Y. Be sure to have all the information + about your sound card and its configuration down (I/O port, + interrupt and DMA channel), because you will be asked for it. + + You want to read the Sound-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. General information about + the modular sound system is contained in the files + <file:Documentation/sound/oss/Introduction>. The file + <file:Documentation/sound/oss/README.OSS> contains some slightly + outdated but still useful information as well. Newer sound + driver documentation is found in <file:Documentation/sound/alsa/*>. + + If you have a PnP sound card and you want to configure it at boot + time using the ISA PnP tools (read + <http://www.roestock.demon.co.uk/isapnptools/>), then you need to + compile the sound card support as a module and load that module + after the PnP configuration is finished. To do this, choose M here + and read <file:Documentation/sound/oss/README.modules>; the module + will be called soundcore. + + I'm told that even without a sound card, you can make your computer + say more than an occasional beep, by programming the PC speaker. + Kernel patches and supporting utilities to do that are in the pcsp + package, available at <ftp://ftp.infradead.org/pub/pcsp/>. + +source "sound/oss/dmasound/Kconfig" + +if !M68K + +menu "Advanced Linux Sound Architecture" + depends on SOUND!=n + +config SND + tristate "Advanced Linux Sound Architecture" + depends on SOUND + +source "sound/core/Kconfig" + +source "sound/drivers/Kconfig" + +source "sound/isa/Kconfig" + +source "sound/pci/Kconfig" + +source "sound/ppc/Kconfig" + +source "sound/arm/Kconfig" + +source "sound/mips/Kconfig" + +# the following will depenend on the order of config. +# here assuming USB is defined before ALSA +source "sound/usb/Kconfig" + +# the following will depenend on the order of config. +# here assuming PCMCIA is defined before ALSA +source "sound/pcmcia/Kconfig" + +source "sound/sparc/Kconfig" + +source "sound/parisc/Kconfig" + +endmenu + +menu "Open Sound System" + depends on SOUND!=n && (BROKEN || (!SPARC32 && !SPARC64)) + +config SOUND_PRIME + tristate "Open Sound System (DEPRECATED)" + depends on SOUND + help + Say 'Y' or 'M' to enable Open Sound System drivers. + +source "sound/oss/Kconfig" + +endmenu + +endif + +endmenu |