summaryrefslogtreecommitdiffstats
path: root/samples
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-09-03 08:08:17 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-09-03 08:08:17 -0700
commitdd5cdb48edfd34401799056a9acf61078d773f90 (patch)
tree8e251fb4a4c196540fe9b6a6d8b13275f93a057c /samples
parent1e1a4e8f439113b7820bc7150569f685e1cc2b43 (diff)
parent62da98656b62a5ca57f22263705175af8ded5aa1 (diff)
downloadlinux-dd5cdb48edfd34401799056a9acf61078d773f90.tar.bz2
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
Diffstat (limited to 'samples')
-rw-r--r--samples/bpf/Makefile4
-rw-r--r--samples/bpf/bpf_helpers.h27
-rw-r--r--samples/bpf/test_verifier.c59
-rw-r--r--samples/bpf/tracex1_kern.c2
-rw-r--r--samples/bpf/tracex2_kern.c6
-rw-r--r--samples/bpf/tracex3_kern.c4
-rw-r--r--samples/bpf/tracex4_kern.c6
-rw-r--r--samples/bpf/tracex5_kern.c6
-rw-r--r--samples/bpf/tracex6_kern.c27
-rw-r--r--samples/bpf/tracex6_user.c72
10 files changed, 201 insertions, 12 deletions
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 4450fed91ab4..63e7d50e6a4f 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -12,6 +12,7 @@ hostprogs-y += tracex2
hostprogs-y += tracex3
hostprogs-y += tracex4
hostprogs-y += tracex5
+hostprogs-y += tracex6
hostprogs-y += lathist
test_verifier-objs := test_verifier.o libbpf.o
@@ -25,6 +26,7 @@ tracex2-objs := bpf_load.o libbpf.o tracex2_user.o
tracex3-objs := bpf_load.o libbpf.o tracex3_user.o
tracex4-objs := bpf_load.o libbpf.o tracex4_user.o
tracex5-objs := bpf_load.o libbpf.o tracex5_user.o
+tracex6-objs := bpf_load.o libbpf.o tracex6_user.o
lathist-objs := bpf_load.o libbpf.o lathist_user.o
# Tell kbuild to always build the programs
@@ -37,6 +39,7 @@ always += tracex2_kern.o
always += tracex3_kern.o
always += tracex4_kern.o
always += tracex5_kern.o
+always += tracex6_kern.o
always += tcbpf1_kern.o
always += lathist_kern.o
@@ -51,6 +54,7 @@ HOSTLOADLIBES_tracex2 += -lelf
HOSTLOADLIBES_tracex3 += -lelf
HOSTLOADLIBES_tracex4 += -lelf -lrt
HOSTLOADLIBES_tracex5 += -lelf
+HOSTLOADLIBES_tracex6 += -lelf
HOSTLOADLIBES_lathist += -lelf
# point this to your LLVM backend with bpf support
diff --git a/samples/bpf/bpf_helpers.h b/samples/bpf/bpf_helpers.h
index bdf1c1607b80..3a44d3a272af 100644
--- a/samples/bpf/bpf_helpers.h
+++ b/samples/bpf/bpf_helpers.h
@@ -31,6 +31,8 @@ static unsigned long long (*bpf_get_current_uid_gid)(void) =
(void *) BPF_FUNC_get_current_uid_gid;
static int (*bpf_get_current_comm)(void *buf, int buf_size) =
(void *) BPF_FUNC_get_current_comm;
+static int (*bpf_perf_event_read)(void *map, int index) =
+ (void *) BPF_FUNC_perf_event_read;
/* llvm builtin functions that eBPF C program may use to
* emit BPF_LD_ABS and BPF_LD_IND instructions
@@ -60,4 +62,29 @@ static int (*bpf_l3_csum_replace)(void *ctx, int off, int from, int to, int flag
static int (*bpf_l4_csum_replace)(void *ctx, int off, int from, int to, int flags) =
(void *) BPF_FUNC_l4_csum_replace;
+#if defined(__x86_64__)
+
+#define PT_REGS_PARM1(x) ((x)->di)
+#define PT_REGS_PARM2(x) ((x)->si)
+#define PT_REGS_PARM3(x) ((x)->dx)
+#define PT_REGS_PARM4(x) ((x)->cx)
+#define PT_REGS_PARM5(x) ((x)->r8)
+#define PT_REGS_RET(x) ((x)->sp)
+#define PT_REGS_FP(x) ((x)->bp)
+#define PT_REGS_RC(x) ((x)->ax)
+#define PT_REGS_SP(x) ((x)->sp)
+
+#elif defined(__s390x__)
+
+#define PT_REGS_PARM1(x) ((x)->gprs[2])
+#define PT_REGS_PARM2(x) ((x)->gprs[3])
+#define PT_REGS_PARM3(x) ((x)->gprs[4])
+#define PT_REGS_PARM4(x) ((x)->gprs[5])
+#define PT_REGS_PARM5(x) ((x)->gprs[6])
+#define PT_REGS_RET(x) ((x)->gprs[14])
+#define PT_REGS_FP(x) ((x)->gprs[11]) /* Works only with CONFIG_FRAME_POINTER */
+#define PT_REGS_RC(x) ((x)->gprs[2])
+#define PT_REGS_SP(x) ((x)->gprs[15])
+
+#endif
#endif
diff --git a/samples/bpf/test_verifier.c b/samples/bpf/test_verifier.c
index 693605997abc..ee0f110c9c54 100644
--- a/samples/bpf/test_verifier.c
+++ b/samples/bpf/test_verifier.c
@@ -822,6 +822,65 @@ static struct bpf_test tests[] = {
.result = ACCEPT,
.prog_type = BPF_PROG_TYPE_SCHED_CLS,
},
+ {
+ "PTR_TO_STACK store/load",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -10),
+ BPF_ST_MEM(BPF_DW, BPF_REG_1, 2, 0xfaceb00c),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, 2),
+ BPF_EXIT_INSN(),
+ },
+ .result = ACCEPT,
+ },
+ {
+ "PTR_TO_STACK store/load - bad alignment on off",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -8),
+ BPF_ST_MEM(BPF_DW, BPF_REG_1, 2, 0xfaceb00c),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, 2),
+ BPF_EXIT_INSN(),
+ },
+ .result = REJECT,
+ .errstr = "misaligned access off -6 size 8",
+ },
+ {
+ "PTR_TO_STACK store/load - bad alignment on reg",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -10),
+ BPF_ST_MEM(BPF_DW, BPF_REG_1, 8, 0xfaceb00c),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, 8),
+ BPF_EXIT_INSN(),
+ },
+ .result = REJECT,
+ .errstr = "misaligned access off -2 size 8",
+ },
+ {
+ "PTR_TO_STACK store/load - out of bounds low",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -80000),
+ BPF_ST_MEM(BPF_DW, BPF_REG_1, 8, 0xfaceb00c),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, 8),
+ BPF_EXIT_INSN(),
+ },
+ .result = REJECT,
+ .errstr = "invalid stack off=-79992 size=8",
+ },
+ {
+ "PTR_TO_STACK store/load - out of bounds high",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_10),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -8),
+ BPF_ST_MEM(BPF_DW, BPF_REG_1, 8, 0xfaceb00c),
+ BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, 8),
+ BPF_EXIT_INSN(),
+ },
+ .result = REJECT,
+ .errstr = "invalid stack off=0 size=8",
+ },
};
static int probe_filter_length(struct bpf_insn *fp)
diff --git a/samples/bpf/tracex1_kern.c b/samples/bpf/tracex1_kern.c
index 31620463701a..3f450a8fa1f3 100644
--- a/samples/bpf/tracex1_kern.c
+++ b/samples/bpf/tracex1_kern.c
@@ -29,7 +29,7 @@ int bpf_prog1(struct pt_regs *ctx)
int len;
/* non-portable! works for the given kernel only */
- skb = (struct sk_buff *) ctx->di;
+ skb = (struct sk_buff *) PT_REGS_PARM1(ctx);
dev = _(skb->dev);
diff --git a/samples/bpf/tracex2_kern.c b/samples/bpf/tracex2_kern.c
index dc50f4f2943f..b32367cfbff4 100644
--- a/samples/bpf/tracex2_kern.c
+++ b/samples/bpf/tracex2_kern.c
@@ -27,10 +27,10 @@ int bpf_prog2(struct pt_regs *ctx)
long init_val = 1;
long *value;
- /* x64 specific: read ip of kfree_skb caller.
+ /* x64/s390x specific: read ip of kfree_skb caller.
* non-portable version of __builtin_return_address(0)
*/
- bpf_probe_read(&loc, sizeof(loc), (void *)ctx->sp);
+ bpf_probe_read(&loc, sizeof(loc), (void *)PT_REGS_RET(ctx));
value = bpf_map_lookup_elem(&my_map, &loc);
if (value)
@@ -79,7 +79,7 @@ struct bpf_map_def SEC("maps") my_hist_map = {
SEC("kprobe/sys_write")
int bpf_prog3(struct pt_regs *ctx)
{
- long write_size = ctx->dx; /* arg3 */
+ long write_size = PT_REGS_PARM3(ctx);
long init_val = 1;
long *value;
struct hist_key key = {};
diff --git a/samples/bpf/tracex3_kern.c b/samples/bpf/tracex3_kern.c
index 255ff2792366..bf337fbb0947 100644
--- a/samples/bpf/tracex3_kern.c
+++ b/samples/bpf/tracex3_kern.c
@@ -23,7 +23,7 @@ struct bpf_map_def SEC("maps") my_map = {
SEC("kprobe/blk_mq_start_request")
int bpf_prog1(struct pt_regs *ctx)
{
- long rq = ctx->di;
+ long rq = PT_REGS_PARM1(ctx);
u64 val = bpf_ktime_get_ns();
bpf_map_update_elem(&my_map, &rq, &val, BPF_ANY);
@@ -51,7 +51,7 @@ struct bpf_map_def SEC("maps") lat_map = {
SEC("kprobe/blk_update_request")
int bpf_prog2(struct pt_regs *ctx)
{
- long rq = ctx->di;
+ long rq = PT_REGS_PARM1(ctx);
u64 *value, l, base;
u32 index;
diff --git a/samples/bpf/tracex4_kern.c b/samples/bpf/tracex4_kern.c
index 126b80512228..ac4671420cf1 100644
--- a/samples/bpf/tracex4_kern.c
+++ b/samples/bpf/tracex4_kern.c
@@ -27,7 +27,7 @@ struct bpf_map_def SEC("maps") my_map = {
SEC("kprobe/kmem_cache_free")
int bpf_prog1(struct pt_regs *ctx)
{
- long ptr = ctx->si;
+ long ptr = PT_REGS_PARM2(ctx);
bpf_map_delete_elem(&my_map, &ptr);
return 0;
@@ -36,11 +36,11 @@ int bpf_prog1(struct pt_regs *ctx)
SEC("kretprobe/kmem_cache_alloc_node")
int bpf_prog2(struct pt_regs *ctx)
{
- long ptr = ctx->ax;
+ long ptr = PT_REGS_RC(ctx);
long ip = 0;
/* get ip address of kmem_cache_alloc_node() caller */
- bpf_probe_read(&ip, sizeof(ip), (void *)(ctx->bp + sizeof(ip)));
+ bpf_probe_read(&ip, sizeof(ip), (void *)(PT_REGS_FP(ctx) + sizeof(ip)));
struct pair v = {
.val = bpf_ktime_get_ns(),
diff --git a/samples/bpf/tracex5_kern.c b/samples/bpf/tracex5_kern.c
index b71fe07a7a7a..b3f4295bf288 100644
--- a/samples/bpf/tracex5_kern.c
+++ b/samples/bpf/tracex5_kern.c
@@ -24,7 +24,7 @@ int bpf_prog1(struct pt_regs *ctx)
{
struct seccomp_data sd = {};
- bpf_probe_read(&sd, sizeof(sd), (void *)ctx->di);
+ bpf_probe_read(&sd, sizeof(sd), (void *)PT_REGS_PARM1(ctx));
/* dispatch into next BPF program depending on syscall number */
bpf_tail_call(ctx, &progs, sd.nr);
@@ -42,7 +42,7 @@ PROG(__NR_write)(struct pt_regs *ctx)
{
struct seccomp_data sd = {};
- bpf_probe_read(&sd, sizeof(sd), (void *)ctx->di);
+ bpf_probe_read(&sd, sizeof(sd), (void *)PT_REGS_PARM1(ctx));
if (sd.args[2] == 512) {
char fmt[] = "write(fd=%d, buf=%p, size=%d)\n";
bpf_trace_printk(fmt, sizeof(fmt),
@@ -55,7 +55,7 @@ PROG(__NR_read)(struct pt_regs *ctx)
{
struct seccomp_data sd = {};
- bpf_probe_read(&sd, sizeof(sd), (void *)ctx->di);
+ bpf_probe_read(&sd, sizeof(sd), (void *)PT_REGS_PARM1(ctx));
if (sd.args[2] > 128 && sd.args[2] <= 1024) {
char fmt[] = "read(fd=%d, buf=%p, size=%d)\n";
bpf_trace_printk(fmt, sizeof(fmt),
diff --git a/samples/bpf/tracex6_kern.c b/samples/bpf/tracex6_kern.c
new file mode 100644
index 000000000000..be479c4af9e2
--- /dev/null
+++ b/samples/bpf/tracex6_kern.c
@@ -0,0 +1,27 @@
+#include <linux/ptrace.h>
+#include <linux/version.h>
+#include <uapi/linux/bpf.h>
+#include "bpf_helpers.h"
+
+struct bpf_map_def SEC("maps") my_map = {
+ .type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
+ .key_size = sizeof(int),
+ .value_size = sizeof(u32),
+ .max_entries = 32,
+};
+
+SEC("kprobe/sys_write")
+int bpf_prog1(struct pt_regs *ctx)
+{
+ u64 count;
+ u32 key = bpf_get_smp_processor_id();
+ char fmt[] = "CPU-%d %llu\n";
+
+ count = bpf_perf_event_read(&my_map, key);
+ bpf_trace_printk(fmt, sizeof(fmt), key, count);
+
+ return 0;
+}
+
+char _license[] SEC("license") = "GPL";
+u32 _version SEC("version") = LINUX_VERSION_CODE;
diff --git a/samples/bpf/tracex6_user.c b/samples/bpf/tracex6_user.c
new file mode 100644
index 000000000000..8ea4976cfcf1
--- /dev/null
+++ b/samples/bpf/tracex6_user.c
@@ -0,0 +1,72 @@
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <string.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <sys/ioctl.h>
+#include <linux/perf_event.h>
+#include <linux/bpf.h>
+#include "libbpf.h"
+#include "bpf_load.h"
+
+#define SAMPLE_PERIOD 0x7fffffffffffffffULL
+
+static void test_bpf_perf_event(void)
+{
+ int nr_cpus = sysconf(_SC_NPROCESSORS_CONF);
+ int *pmu_fd = malloc(nr_cpus * sizeof(int));
+ int status, i;
+
+ struct perf_event_attr attr_insn_pmu = {
+ .freq = 0,
+ .sample_period = SAMPLE_PERIOD,
+ .inherit = 0,
+ .type = PERF_TYPE_HARDWARE,
+ .read_format = 0,
+ .sample_type = 0,
+ .config = 0,/* PMU: cycles */
+ };
+
+ for (i = 0; i < nr_cpus; i++) {
+ pmu_fd[i] = perf_event_open(&attr_insn_pmu, -1/*pid*/, i/*cpu*/, -1/*group_fd*/, 0);
+ if (pmu_fd[i] < 0) {
+ printf("event syscall failed\n");
+ goto exit;
+ }
+
+ bpf_update_elem(map_fd[0], &i, &pmu_fd[i], BPF_ANY);
+ ioctl(pmu_fd[i], PERF_EVENT_IOC_ENABLE, 0);
+ }
+
+ status = system("ls > /dev/null");
+ if (status)
+ goto exit;
+ status = system("sleep 2");
+ if (status)
+ goto exit;
+
+exit:
+ for (i = 0; i < nr_cpus; i++)
+ close(pmu_fd[i]);
+ close(map_fd[0]);
+ free(pmu_fd);
+}
+
+int main(int argc, char **argv)
+{
+ char filename[256];
+
+ snprintf(filename, sizeof(filename), "%s_kern.o", argv[0]);
+
+ if (load_bpf_file(filename)) {
+ printf("%s", bpf_log_buf);
+ return 1;
+ }
+
+ test_bpf_perf_event();
+ read_trace_pipe();
+
+ return 0;
+}