diff options
| author | Abhishek Pandit-Subedi <abhishekpandit@chromium.org> | 2020-09-11 15:32:20 -0700 |
|---|---|---|
| committer | Marcel Holtmann <marcel@holtmann.org> | 2020-09-13 09:47:38 +0200 |
| commit | 6baf8a6afc1e5bc30179112bf8c685e448372f43 (patch) | |
| tree | 480114ab600af9d52e915cb8f45dddd822082831 /net | |
| parent | 20ae4089d0afeb24e9ceb026b996bfa55c983cc2 (diff) | |
| download | linux-6baf8a6afc1e5bc30179112bf8c685e448372f43.tar.bz2 | |
Bluetooth: Set ext scan response only when it exists
Only set extended scan response only when it exists. Otherwise, clear
the scan response data.
Per the core spec v5.2, Vol 4, Part E, 7.8.55
If the advertising set is non-scannable and the Host uses this command
other than to discard existing data, the Controller shall return the
error code Invalid HCI Command Parameters (0x12).
On WCN3991, the controller correctly responds with Invalid Parameters
when this is sent. That error causes __hci_req_hci_power_on to fail
with -EINVAL and LE devices can't connect because background scanning
isn't configured.
Here is an hci trace of where this issue occurs during power on:
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
Handle: 0x00
Properties: 0x0010
Use legacy advertising PDUs: ADV_NONCONN_IND
Min advertising interval: 181.250 msec (0x0122)
Max advertising interval: 181.250 msec (0x0122)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect...
TX power: 127 dbm (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 1M (0x01)
SID: 0x00
Scan request notifications: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 5
LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1
Status: Success (0x00)
TX power (selected): 9 dbm (0x09)
< HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7
Advertising handle: 0x00
Advertising random address: 08:FD:55:ED:22:28 (OUI 08-FD-55)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Set Random Address (0x08|0x0035) ncmd
Status: Success (0x00)
< HCI Command: LE Set Extended Scan Response Data (0x08|0x0038) plen 35
Handle: 0x00
Operation: Complete scan response data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x0d
Name (short): Chromebook
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Response Data (0x08|0x0038) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'net')
| -rw-r--r-- | net/bluetooth/hci_request.c | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c index e0269192f2e5..e17bc8a1c66d 100644 --- a/net/bluetooth/hci_request.c +++ b/net/bluetooth/hci_request.c @@ -1533,11 +1533,14 @@ void __hci_req_update_scan_rsp_data(struct hci_request *req, u8 instance) memset(&cp, 0, sizeof(cp)); - if (instance) + /* Extended scan response data doesn't allow a response to be + * set if the instance isn't scannable. + */ + if (get_adv_instance_scan_rsp_len(hdev, instance)) len = create_instance_scan_rsp_data(hdev, instance, cp.data); else - len = create_default_scan_rsp_data(hdev, cp.data); + len = 0; if (hdev->scan_rsp_data_len == len && !memcmp(cp.data, hdev->scan_rsp_data, len)) |