mac80211: fix PS-poll response, race

When a station queries us for a PS-poll response, we wrongly
queue the frame on the virtual interface's queue rather than
the pending queue.

Additionally, fix a race condition where we could potentially
send multiple frames to the sleeping station due to using a
station flag rather than a packet flag. When converting to a
packet flag, we can also convert p54 and remove the filter
clearing we added for it.

(Also remove a now dead function)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Bob Copeland <me@bobcopeland.com>
Tested-by: Bob Copeland <me@bobcopeland.com>
Cc: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

3 files changed, 7 insertions, 36 deletions

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index cb95a3116034..f195705146bd 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -783,7 +783,7 @@ static void ap_sta_ps_start(struct sta_info *sta)
 	struct ieee80211_local *local = sdata->local;
 
 	atomic_inc(&sdata->bss->num_sta_ps);
-	set_and_clear_sta_flags(sta, WLAN_STA_PS, WLAN_STA_PSPOLL);
+	set_sta_flags(sta, WLAN_STA_PS);
 	drv_sta_notify(local, &sdata->vif, STA_NOTIFY_SLEEP, &sta->sta);
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 	printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n",
@@ -799,7 +799,7 @@ static int ap_sta_ps_end(struct sta_info *sta)
 
 	atomic_dec(&sdata->bss->num_sta_ps);
 
-	clear_sta_flags(sta, WLAN_STA_PS | WLAN_STA_PSPOLL);
+	clear_sta_flags(sta, WLAN_STA_PS);
 	drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta);
 
 	if (!skb_queue_empty(&sta->ps_tx_buf))
@@ -1117,14 +1117,15 @@ ieee80211_rx_h_ps_poll(struct ieee80211_rx_data *rx)
 		skb_queue_empty(&rx->sta->ps_tx_buf);
 
 	if (skb) {
+		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 		struct ieee80211_hdr *hdr =
 			(struct ieee80211_hdr *) skb->data;
 
 		/*
-		 * Tell TX path to send one frame even though the STA may
+		 * Tell TX path to send this frame even though the STA may
 		 * still remain is PS mode after this frame exchange.
 		 */
-		set_sta_flags(rx->sta, WLAN_STA_PSPOLL);
+		info->flags |= IEEE80211_TX_CTL_PSPOLL_RESPONSE;
 
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 		printk(KERN_DEBUG "STA %pM aid %d: PS Poll (entries after %d)\n",
@@ -1139,7 +1140,7 @@ ieee80211_rx_h_ps_poll(struct ieee80211_rx_data *rx)
 		else
 			hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
 
-		dev_queue_xmit(skb);
+		ieee80211_add_pending_skb(rx->local, skb);
 
 		if (no_pending_pkts)
 			sta_info_clear_tim_bit(rx->sta);
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 4ecf10a9bd00..ccc3adf962c7 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -30,7 +30,6 @@
  * @WLAN_STA_ASSOC_AP: We're associated to that station, it is an AP.
  * @WLAN_STA_WME: Station is a QoS-STA.
  * @WLAN_STA_WDS: Station is one of our WDS peers.
- * @WLAN_STA_PSPOLL: Station has just PS-polled us.
  * @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
  *	IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
  *	frame to this station is transmitted.
@@ -47,7 +46,6 @@ enum ieee80211_sta_info_flags {
 	WLAN_STA_ASSOC_AP	= 1<<5,
 	WLAN_STA_WME		= 1<<6,
 	WLAN_STA_WDS		= 1<<7,
-	WLAN_STA_PSPOLL		= 1<<8,
 	WLAN_STA_CLEAR_PS_FILT	= 1<<9,
 	WLAN_STA_MFP		= 1<<10,
 	WLAN_STA_SUSPEND	= 1<<11
@@ -359,17 +357,6 @@ static inline void clear_sta_flags(struct sta_info *sta, const u32 flags)
 	spin_unlock_irqrestore(&sta->flaglock, irqfl);
 }
 
-static inline void set_and_clear_sta_flags(struct sta_info *sta,
-					   const u32 set, const u32 clear)
-{
-	unsigned long irqfl;
-
-	spin_lock_irqsave(&sta->flaglock, irqfl);
-	sta->flags |= set;
-	sta->flags &= ~clear;
-	spin_unlock_irqrestore(&sta->flaglock, irqfl);
-}
-
 static inline u32 test_sta_flags(struct sta_info *sta, const u32 flags)
 {
 	u32 ret;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 70ff4f065665..edacad1fb1dc 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -373,7 +373,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 	staflags = get_sta_flags(sta);
 
 	if (unlikely((staflags & WLAN_STA_PS) &&
-		     !(staflags & WLAN_STA_PSPOLL))) {
+		     !(info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE))) {
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 		printk(KERN_DEBUG "STA %pM aid %d: PS buffer (entries "
 		       "before %d)\n",
@@ -412,24 +412,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 		       sta->sta.addr);
 	}
 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
-	if (test_and_clear_sta_flags(sta, WLAN_STA_PSPOLL)) {
-		/*
-		 * The sleeping station with pending data is now snoozing.
-		 * It queried us for its buffered frames and will go back
-		 * to deep sleep once it got everything.
-		 *
-		 * inform the driver, in case the hardware does powersave
-		 * frame filtering and keeps a station  blacklist on its own
-		 * (e.g: p54), so that frames can be delivered unimpeded.
-		 *
-		 * Note: It should be safe to disable the filter now.
-		 * As, it is really unlikely that we still have any pending
-		 * frame for this station in the hw's buffers/fifos left,
-		 * that is not rejected with a unsuccessful tx_status yet.
-		 */
 
-		info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT;
-	}
 	return TX_CONTINUE;
 }