summaryrefslogtreecommitdiffstats
path: root/net/wireless
diff options
context:
space:
mode:
authorJohannes Berg <johannes@sipsolutions.net>2008-01-24 19:38:38 +0100
committerJohn W. Linville <linville@tuxdriver.com>2008-02-29 15:19:32 -0500
commit8318d78a44d49ac1edf2bdec7299de3617c4232e (patch)
treed434634418edd7399737801615d247be06616fdd /net/wireless
parent10b6b80145cc93887dd8aab99bfffa375e9add31 (diff)
downloadlinux-8318d78a44d49ac1edf2bdec7299de3617c4232e.tar.bz2
cfg80211 API for channels/bitrates, mac80211 and driver conversion
This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'net/wireless')
-rw-r--r--net/wireless/Makefile2
-rw-r--r--net/wireless/core.c41
-rw-r--r--net/wireless/core.h3
-rw-r--r--net/wireless/reg.c153
-rw-r--r--net/wireless/util.c98
5 files changed, 296 insertions, 1 deletions
diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index 65710a42e5a7..b9f943c45f3b 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_WIRELESS_EXT) += wext.o
obj-$(CONFIG_CFG80211) += cfg80211.o
-cfg80211-y += core.o sysfs.o radiotap.o
+cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o
cfg80211-$(CONFIG_NL80211) += nl80211.o
diff --git a/net/wireless/core.c b/net/wireless/core.c
index cfc5fc5f9e75..80afacdae46c 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -232,6 +232,47 @@ int wiphy_register(struct wiphy *wiphy)
{
struct cfg80211_registered_device *drv = wiphy_to_dev(wiphy);
int res;
+ enum ieee80211_band band;
+ struct ieee80211_supported_band *sband;
+ bool have_band = false;
+ int i;
+
+ /* sanity check supported bands/channels */
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ sband = wiphy->bands[band];
+ if (!sband)
+ continue;
+
+ sband->band = band;
+
+ if (!sband->n_channels || !sband->n_bitrates) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < sband->n_channels; i++) {
+ sband->channels[i].orig_flags =
+ sband->channels[i].flags;
+ sband->channels[i].orig_mag =
+ sband->channels[i].max_antenna_gain;
+ sband->channels[i].orig_mpwr =
+ sband->channels[i].max_power;
+ sband->channels[i].band = band;
+ }
+
+ have_band = true;
+ }
+
+ if (!have_band) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ /* check and set up bitrates */
+ ieee80211_set_bitrate_flags(wiphy);
+
+ /* set up regulatory info */
+ wiphy_update_regulatory(wiphy);
mutex_lock(&cfg80211_drv_mutex);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index eb0f846b40df..7a02c356d63d 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -78,4 +78,7 @@ extern void cfg80211_dev_free(struct cfg80211_registered_device *drv);
extern int cfg80211_dev_rename(struct cfg80211_registered_device *drv,
char *newname);
+void ieee80211_set_bitrate_flags(struct wiphy *wiphy);
+void wiphy_update_regulatory(struct wiphy *wiphy);
+
#endif /* __NET_WIRELESS_CORE_H */
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
new file mode 100644
index 000000000000..2b63c96dcf19
--- /dev/null
+++ b/net/wireless/reg.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2002-2005, Instant802 Networks, Inc.
+ * Copyright 2005-2006, Devicescape Software, Inc.
+ * Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This regulatory domain control implementation is highly incomplete, it
+ * only exists for the purpose of not regressing mac80211.
+ *
+ * For now, drivers can restrict the set of allowed channels by either
+ * not registering those channels or setting the IEEE80211_CHAN_DISABLED
+ * flag; that flag will only be *set* by this code, never *cleared.
+ *
+ * The usual implementation is for a driver to read a device EEPROM to
+ * determine which regulatory domain it should be operating under, then
+ * looking up the allowable channels in a driver-local table and finally
+ * registering those channels in the wiphy structure.
+ *
+ * Alternatively, drivers that trust the regulatory domain control here
+ * will register a complete set of capabilities and the control code
+ * will restrict the set by setting the IEEE80211_CHAN_* flags.
+ */
+#include <linux/kernel.h>
+#include <net/wireless.h>
+#include "core.h"
+
+static char *ieee80211_regdom = "US";
+module_param(ieee80211_regdom, charp, 0444);
+MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code");
+
+struct ieee80211_channel_range {
+ short start_freq;
+ short end_freq;
+ int max_power;
+ int max_antenna_gain;
+ u32 flags;
+};
+
+struct ieee80211_regdomain {
+ const char *code;
+ const struct ieee80211_channel_range *ranges;
+ int n_ranges;
+};
+
+#define RANGE_PWR(_start, _end, _pwr, _ag, _flags) \
+ { _start, _end, _pwr, _ag, _flags }
+
+
+/*
+ * Ideally, in the future, these definitions will be loaded from a
+ * userspace table via some daemon.
+ */
+static const struct ieee80211_channel_range ieee80211_US_channels[] = {
+ /* IEEE 802.11b/g, channels 1..11 */
+ RANGE_PWR(2412, 2462, 27, 6, 0),
+ /* IEEE 802.11a, channels 52..64 */
+ RANGE_PWR(5260, 5320, 23, 6, 0),
+ /* IEEE 802.11a, channels 149..165, outdoor */
+ RANGE_PWR(5745, 5825, 30, 6, 0),
+};
+
+static const struct ieee80211_channel_range ieee80211_JP_channels[] = {
+ /* IEEE 802.11b/g, channels 1..14 */
+ RANGE_PWR(2412, 2484, 20, 6, 0),
+ /* IEEE 802.11a, channels 34..48 */
+ RANGE_PWR(5170, 5240, 20, 6, IEEE80211_CHAN_PASSIVE_SCAN),
+ /* IEEE 802.11a, channels 52..64 */
+ RANGE_PWR(5260, 5320, 20, 6, IEEE80211_CHAN_NO_IBSS |
+ IEEE80211_CHAN_RADAR),
+};
+
+#define REGDOM(_code) \
+ { \
+ .code = __stringify(_code), \
+ .ranges = ieee80211_ ##_code## _channels, \
+ .n_ranges = ARRAY_SIZE(ieee80211_ ##_code## _channels), \
+ }
+
+static const struct ieee80211_regdomain ieee80211_regdoms[] = {
+ REGDOM(US),
+ REGDOM(JP),
+};
+
+
+static const struct ieee80211_regdomain *get_regdom(void)
+{
+ static const struct ieee80211_channel_range
+ ieee80211_world_channels[] = {
+ /* IEEE 802.11b/g, channels 1..11 */
+ RANGE_PWR(2412, 2462, 27, 6, 0),
+ };
+ static const struct ieee80211_regdomain regdom_world = REGDOM(world);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ieee80211_regdoms); i++)
+ if (strcmp(ieee80211_regdom, ieee80211_regdoms[i].code) == 0)
+ return &ieee80211_regdoms[i];
+
+ return &regdom_world;
+}
+
+
+static void handle_channel(struct ieee80211_channel *chan,
+ const struct ieee80211_regdomain *rd)
+{
+ int i;
+ u32 flags = chan->orig_flags;
+ const struct ieee80211_channel_range *rg = NULL;
+
+ for (i = 0; i < rd->n_ranges; i++) {
+ if (rd->ranges[i].start_freq <= chan->center_freq &&
+ chan->center_freq <= rd->ranges[i].end_freq) {
+ rg = &rd->ranges[i];
+ break;
+ }
+ }
+
+ if (!rg) {
+ /* not found */
+ flags |= IEEE80211_CHAN_DISABLED;
+ chan->flags = flags;
+ return;
+ }
+
+ chan->flags = flags;
+ chan->max_antenna_gain = min(chan->orig_mag,
+ rg->max_antenna_gain);
+ chan->max_power = min(chan->orig_mpwr, rg->max_power);
+}
+
+static void handle_band(struct ieee80211_supported_band *sband,
+ const struct ieee80211_regdomain *rd)
+{
+ int i;
+
+ for (i = 0; i < sband->n_channels; i++)
+ handle_channel(&sband->channels[i], rd);
+}
+
+void wiphy_update_regulatory(struct wiphy *wiphy)
+{
+ enum ieee80211_band band;
+ const struct ieee80211_regdomain *rd = get_regdom();
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++)
+ if (wiphy->bands[band])
+ handle_band(wiphy->bands[band], rd);
+}
diff --git a/net/wireless/util.c b/net/wireless/util.c
new file mode 100644
index 000000000000..0dcccbf3eb57
--- /dev/null
+++ b/net/wireless/util.c
@@ -0,0 +1,98 @@
+/*
+ * Wireless utility functions
+ *
+ * Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
+ */
+#include <net/wireless.h>
+#include <asm/bitops.h>
+#include "core.h"
+
+int ieee80211_channel_to_frequency(int chan)
+{
+ if (chan < 14)
+ return 2407 + chan * 5;
+
+ if (chan == 14)
+ return 2484;
+
+ /* FIXME: 802.11j 17.3.8.3.2 */
+ return (chan + 1000) * 5;
+}
+EXPORT_SYMBOL(ieee80211_channel_to_frequency);
+
+int ieee80211_frequency_to_channel(int freq)
+{
+ if (freq == 2484)
+ return 14;
+
+ if (freq < 2484)
+ return (freq - 2407) / 5;
+
+ /* FIXME: 802.11j 17.3.8.3.2 */
+ return freq/5 - 1000;
+}
+EXPORT_SYMBOL(ieee80211_frequency_to_channel);
+
+static void set_mandatory_flags_band(struct ieee80211_supported_band *sband,
+ enum ieee80211_band band)
+{
+ int i, want;
+
+ switch (band) {
+ case IEEE80211_BAND_5GHZ:
+ want = 3;
+ for (i = 0; i < sband->n_bitrates; i++) {
+ if (sband->bitrates[i].bitrate == 60 ||
+ sband->bitrates[i].bitrate == 120 ||
+ sband->bitrates[i].bitrate == 240) {
+ sband->bitrates[i].flags |=
+ IEEE80211_RATE_MANDATORY_A;
+ want--;
+ }
+ }
+ WARN_ON(want);
+ break;
+ case IEEE80211_BAND_2GHZ:
+ want = 7;
+ for (i = 0; i < sband->n_bitrates; i++) {
+ if (sband->bitrates[i].bitrate == 10) {
+ sband->bitrates[i].flags |=
+ IEEE80211_RATE_MANDATORY_B |
+ IEEE80211_RATE_MANDATORY_G;
+ want--;
+ }
+
+ if (sband->bitrates[i].bitrate == 20 ||
+ sband->bitrates[i].bitrate == 55 ||
+ sband->bitrates[i].bitrate == 110 ||
+ sband->bitrates[i].bitrate == 60 ||
+ sband->bitrates[i].bitrate == 120 ||
+ sband->bitrates[i].bitrate == 240) {
+ sband->bitrates[i].flags |=
+ IEEE80211_RATE_MANDATORY_G;
+ want--;
+ }
+
+ if (sband->bitrates[i].bitrate == 10 ||
+ sband->bitrates[i].bitrate == 20 ||
+ sband->bitrates[i].bitrate == 55 ||
+ sband->bitrates[i].bitrate == 110)
+ sband->bitrates[i].flags |=
+ IEEE80211_RATE_ERP_G;
+ }
+ WARN_ON(want != 0 && want != 6);
+ break;
+ case IEEE80211_NUM_BANDS:
+ WARN_ON(1);
+ break;
+ }
+}
+
+void ieee80211_set_bitrate_flags(struct wiphy *wiphy)
+{
+ enum ieee80211_band band;
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++)
+ if (wiphy->bands[band])
+ set_mandatory_flags_band(wiphy->bands[band], band);
+}