diff options
author | Avraham Stern <avraham.stern@intel.com> | 2016-07-05 17:10:13 +0300 |
---|---|---|
committer | Johannes Berg <johannes.berg@intel.com> | 2016-07-06 14:51:31 +0200 |
commit | 1d76250bd34af86c6498fc51e50cab3bfbbeceaa (patch) | |
tree | 36b75a19f179f9225619d6ca28ff10df90956805 /net/wireless/scan.c | |
parent | f1724b0258b412144964f2074b9b6edcf0dce87c (diff) | |
download | linux-1d76250bd34af86c6498fc51e50cab3bfbbeceaa.tar.bz2 |
nl80211: support beacon report scanning
Beacon report radio measurement requires reporting observed BSSs
on the channels specified in the beacon request. If the measurement
mode is set to passive or active, it requires actually performing a
scan (passive or active, accordingly), and reporting the time that
the scan was started and the time each beacon/probe was received
(both in terms of TSF of the BSS of the requesting AP). If the
request mode is table, this information is optional.
In addition, the radio measurement request specifies the channel
dwell time for the measurement.
In order to use scan for beacon report when the mode is active or
passive, add a parameter to scan request that specifies the
channel dwell time, and add scan start time and beacon received time
to scan results information.
Supporting beacon report is required for Multi Band Operation (MBO).
Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Diffstat (limited to 'net/wireless/scan.c')
-rw-r--r-- | net/wireless/scan.c | 18 |
1 files changed, 12 insertions, 6 deletions
diff --git a/net/wireless/scan.c b/net/wireless/scan.c index ef2955c89a00..0358e12be54b 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -3,6 +3,7 @@ * * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH + * Copyright 2016 Intel Deutschland GmbH */ #include <linux/kernel.h> #include <linux/slab.h> @@ -194,7 +195,7 @@ void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, if (wdev->netdev) cfg80211_sme_scan_done(wdev->netdev); - if (!request->aborted && + if (!request->info.aborted && request->flags & NL80211_SCAN_FLAG_FLUSH) { /* flush entries from previous scans */ spin_lock_bh(&rdev->bss_lock); @@ -202,10 +203,10 @@ void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, spin_unlock_bh(&rdev->bss_lock); } - msg = nl80211_build_scan_msg(rdev, wdev, request->aborted); + msg = nl80211_build_scan_msg(rdev, wdev, request->info.aborted); #ifdef CONFIG_CFG80211_WEXT - if (wdev->netdev && !request->aborted) { + if (wdev->netdev && !request->info.aborted) { memset(&wrqu, 0, sizeof(wrqu)); wireless_send_event(wdev->netdev, SIOCGIWSCAN, &wrqu, NULL); @@ -236,12 +237,13 @@ void __cfg80211_scan_done(struct work_struct *wk) rtnl_unlock(); } -void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted) +void cfg80211_scan_done(struct cfg80211_scan_request *request, + struct cfg80211_scan_info *info) { - trace_cfg80211_scan_done(request, aborted); + trace_cfg80211_scan_done(request, info); WARN_ON(request != wiphy_to_rdev(request->wiphy)->scan_req); - request->aborted = aborted; + request->info = *info; request->notified = true; queue_work(cfg80211_wq, &wiphy_to_rdev(request->wiphy)->scan_done_wk); } @@ -843,6 +845,8 @@ cfg80211_bss_update(struct cfg80211_registered_device *rdev, found->pub.capability = tmp->pub.capability; found->ts = tmp->ts; found->ts_boottime = tmp->ts_boottime; + found->parent_tsf = tmp->parent_tsf; + ether_addr_copy(found->parent_bssid, tmp->parent_bssid); } else { struct cfg80211_internal_bss *new; struct cfg80211_internal_bss *hidden; @@ -1086,6 +1090,8 @@ cfg80211_inform_bss_frame_data(struct wiphy *wiphy, tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int); tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info); tmp.ts_boottime = data->boottime_ns; + tmp.parent_tsf = data->parent_tsf; + ether_addr_copy(tmp.parent_bssid, data->parent_bssid); signal_valid = abs(data->chan->center_freq - channel->center_freq) <= wiphy->max_adj_channel_rssi_comp; |