cfg80211: support ieee80211-freq-limit DT property

This patch adds a helper for reading that new property and applying
limitations of supported channels specified this way.
It is used with devices that normally support a wide wireless band but
in a given config are limited to some part of it (usually due to board
design). For example a dual-band chipset may be able to support one band
only because of used antennas.
It's also common that tri-band routers have separated radios for lower
and higher part of 5 GHz band and it may be impossible to say which is
which without a DT info.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[add new function to documentation, fix link]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 138 insertions, 0 deletions

diff --git a/net/wireless/of.c b/net/wireless/of.c
new file mode 100644
index 000000000000..de221f0edca5
--- /dev/null
+++ b/net/wireless/of.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/of.h>
+#include <net/cfg80211.h>
+#include "core.h"
+
+static bool wiphy_freq_limits_valid_chan(struct wiphy *wiphy,
+					 struct ieee80211_freq_range *freq_limits,
+					 unsigned int n_freq_limits,
+					 struct ieee80211_channel *chan)
+{
+	u32 bw = MHZ_TO_KHZ(20);
+	int i;
+
+	for (i = 0; i < n_freq_limits; i++) {
+		struct ieee80211_freq_range *limit = &freq_limits[i];
+
+		if (cfg80211_does_bw_fit_range(limit,
+					       MHZ_TO_KHZ(chan->center_freq),
+					       bw))
+			return true;
+	}
+
+	return false;
+}
+
+static void wiphy_freq_limits_apply(struct wiphy *wiphy,
+				    struct ieee80211_freq_range *freq_limits,
+				    unsigned int n_freq_limits)
+{
+	enum nl80211_band band;
+	int i;
+
+	if (WARN_ON(!n_freq_limits))
+		return;
+
+	for (band = 0; band < NUM_NL80211_BANDS; band++) {
+		struct ieee80211_supported_band *sband = wiphy->bands[band];
+
+		if (!sband)
+			continue;
+
+		for (i = 0; i < sband->n_channels; i++) {
+			struct ieee80211_channel *chan = &sband->channels[i];
+
+			if (chan->flags & IEEE80211_CHAN_DISABLED)
+				continue;
+
+			if (!wiphy_freq_limits_valid_chan(wiphy, freq_limits,
+							  n_freq_limits,
+							  chan)) {
+				pr_debug("Disabling freq %d MHz as it's out of OF limits\n",
+					 chan->center_freq);
+				chan->flags |= IEEE80211_CHAN_DISABLED;
+			}
+		}
+	}
+}
+
+void wiphy_read_of_freq_limits(struct wiphy *wiphy)
+{
+	struct device *dev = wiphy_dev(wiphy);
+	struct device_node *np;
+	struct property *prop;
+	struct ieee80211_freq_range *freq_limits;
+	unsigned int n_freq_limits;
+	const __be32 *p;
+	int len, i;
+	int err = 0;
+
+	if (!dev)
+		return;
+	np = dev_of_node(dev);
+	if (!np)
+		return;
+
+	prop = of_find_property(np, "ieee80211-freq-limit", &len);
+	if (!prop)
+		return;
+
+	if (!len || len % sizeof(u32) || len / sizeof(u32) % 2) {
+		dev_err(dev, "ieee80211-freq-limit wrong format");
+		return;
+	}
+	n_freq_limits = len / sizeof(u32) / 2;
+
+	freq_limits = kcalloc(n_freq_limits, sizeof(*freq_limits), GFP_KERNEL);
+	if (!freq_limits) {
+		err = -ENOMEM;
+		goto out_kfree;
+	}
+
+	p = NULL;
+	for (i = 0; i < n_freq_limits; i++) {
+		struct ieee80211_freq_range *limit = &freq_limits[i];
+
+		p = of_prop_next_u32(prop, p, &limit->start_freq_khz);
+		if (!p) {
+			err = -EINVAL;
+			goto out_kfree;
+		}
+
+		p = of_prop_next_u32(prop, p, &limit->end_freq_khz);
+		if (!p) {
+			err = -EINVAL;
+			goto out_kfree;
+		}
+
+		if (!limit->start_freq_khz ||
+		    !limit->end_freq_khz ||
+		    limit->start_freq_khz >= limit->end_freq_khz) {
+			err = -EINVAL;
+			goto out_kfree;
+		}
+	}
+
+	wiphy_freq_limits_apply(wiphy, freq_limits, n_freq_limits);
+
+out_kfree:
+	kfree(freq_limits);
+	if (err)
+		dev_err(dev, "Failed to get limits: %d\n", err);
+}
+EXPORT_SYMBOL(wiphy_read_of_freq_limits);