cfg80211/mac80211: add mesh join/leave commands

Instead of tying mesh activity to interface up,
add join and leave commands for mesh. Since we
must be backward compatible, let cfg80211 handle
joining a mesh if a mesh ID was pre-configured
when the device goes up.

Note that this therefore must modify mac80211 as
well since mac80211 needs to lose the logic to
start the mesh on interface up.

We now allow querying mesh parameters before the
mesh is connected, which simply returns defaults.
Setting them (internally renamed to "update") is
only allowed while connected. Specify them with
the new mesh join command instead where needed.

In mac80211, beaconing must now also follow the
mesh enabled/not enabled state, which is done
by testing the mesh ID.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

6 files changed, 38 insertions, 82 deletions

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index d34c7c3dd762..68329d713c02 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -60,11 +60,6 @@ static int ieee80211_change_iface(struct wiphy *wiphy,
 	if (ret)
 		return ret;
 
-	if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len)
-		ieee80211_sdata_set_mesh_id(sdata,
-					    params->mesh_id_len,
-					    params->mesh_id);
-
 	if (type == NL80211_IFTYPE_AP_VLAN &&
 	    params && params->use_4addr == 0)
 		rcu_assign_pointer(sdata->u.vlan.sta, NULL);
@@ -1003,9 +998,9 @@ static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask)
 	return (mask >> (parm-1)) & 0x1;
 }
 
-static int ieee80211_set_mesh_params(struct wiphy *wiphy,
-				struct net_device *dev,
-				const struct mesh_config *nconf, u32 mask)
+static int ieee80211_update_mesh_params(struct wiphy *wiphy,
+					struct net_device *dev, u32 mask,
+					const struct mesh_config *nconf)
 {
 	struct mesh_config *conf;
 	struct ieee80211_sub_if_data *sdata;
@@ -1056,6 +1051,30 @@ static int ieee80211_set_mesh_params(struct wiphy *wiphy,
 	return 0;
 }
 
+static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev,
+			       const struct mesh_config *conf,
+			       const struct mesh_setup *setup)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	memcpy(&sdata->u.mesh.mshcfg, conf, sizeof(struct mesh_config));
+	ifmsh->mesh_id_len = setup->mesh_id_len;
+	memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len);
+
+	ieee80211_start_mesh(sdata);
+
+	return 0;
+}
+
+static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	ieee80211_stop_mesh(sdata);
+
+	return 0;
+}
 #endif
 
 static int ieee80211_change_bss(struct wiphy *wiphy,
@@ -1760,8 +1779,10 @@ struct cfg80211_ops mac80211_config_ops = {
 	.change_mpath = ieee80211_change_mpath,
 	.get_mpath = ieee80211_get_mpath,
 	.dump_mpath = ieee80211_dump_mpath,
-	.set_mesh_params = ieee80211_set_mesh_params,
+	.update_mesh_params = ieee80211_update_mesh_params,
 	.get_mesh_params = ieee80211_get_mesh_params,
+	.join_mesh = ieee80211_join_mesh,
+	.leave_mesh = ieee80211_leave_mesh,
 #endif
 	.change_bss = ieee80211_change_bss,
 	.set_txq_params = ieee80211_set_txq_params,
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index e7c880725639..72499fe5fc36 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -609,19 +609,6 @@ struct ieee80211_sub_if_data *vif_to_sdata(struct ieee80211_vif *p)
 	return container_of(p, struct ieee80211_sub_if_data, vif);
 }
 
-static inline void
-ieee80211_sdata_set_mesh_id(struct ieee80211_sub_if_data *sdata,
-			    u8 mesh_id_len, u8 *mesh_id)
-{
-#ifdef CONFIG_MAC80211_MESH
-	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
-	ifmsh->mesh_id_len = mesh_id_len;
-	memcpy(ifmsh->mesh_id, mesh_id, mesh_id_len);
-#else
-	WARN_ON(1);
-#endif
-}
-
 enum sdata_queue_type {
 	IEEE80211_SDATA_QUEUE_TYPE_FRAME	= 0,
 	IEEE80211_SDATA_QUEUE_AGG_START		= 1,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 96e27f1e79fb..f0f11bb794af 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -268,9 +268,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 				goto err_stop;
 		}
 
-		if (ieee80211_vif_is_mesh(&sdata->vif)) {
-			ieee80211_start_mesh(sdata);
-		} else if (sdata->vif.type == NL80211_IFTYPE_AP) {
+		if (sdata->vif.type == NL80211_IFTYPE_AP) {
 			local->fif_pspoll++;
 			local->fif_probe_req++;
 
@@ -495,10 +493,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		ieee80211_adjust_monitor_flags(sdata, -1);
 		ieee80211_configure_filter(local);
 		break;
-	case NL80211_IFTYPE_MESH_POINT:
-		if (ieee80211_vif_is_mesh(&sdata->vif))
-			ieee80211_stop_mesh(sdata);
-		/* fall through */
 	default:
 		flush_work(&sdata->work);
 		/*
@@ -1188,12 +1182,6 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 	if (ret)
 		goto fail;
 
-	if (ieee80211_vif_is_mesh(&sdata->vif) &&
-	    params && params->mesh_id_len)
-		ieee80211_sdata_set_mesh_id(sdata,
-					    params->mesh_id_len,
-					    params->mesh_id);
-
 	mutex_lock(&local->iflist_mtx);
 	list_add_tail_rcu(&sdata->list, &local->interfaces);
 	mutex_unlock(&local->iflist_mtx);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 107a0cbe52ac..2de69766c6aa 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -246,7 +246,8 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 					!!sdata->u.ibss.presp;
 				break;
 			case NL80211_IFTYPE_MESH_POINT:
-				sdata->vif.bss_conf.enable_beacon = true;
+				sdata->vif.bss_conf.enable_beacon =
+					!!sdata->u.mesh.mesh_id_len;
 				break;
 			default:
 				/* not reached */
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 0d3234875ac5..63e1188d5062 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -530,6 +530,11 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	ifmsh->mesh_id_len = 0;
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
+	sta_info_flush(local, NULL);
 
 	del_timer_sync(&sdata->u.mesh.housekeeping_timer);
 	del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
@@ -674,27 +679,6 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
 		    ieee80211_mesh_housekeeping_timer,
 		    (unsigned long) sdata);
 
-	ifmsh->mshcfg.dot11MeshRetryTimeout = MESH_RET_T;
-	ifmsh->mshcfg.dot11MeshConfirmTimeout = MESH_CONF_T;
-	ifmsh->mshcfg.dot11MeshHoldingTimeout = MESH_HOLD_T;
-	ifmsh->mshcfg.dot11MeshMaxRetries = MESH_MAX_RETR;
-	ifmsh->mshcfg.dot11MeshTTL = MESH_TTL;
-	ifmsh->mshcfg.element_ttl = MESH_DEFAULT_ELEMENT_TTL;
-	ifmsh->mshcfg.auto_open_plinks = true;
-	ifmsh->mshcfg.dot11MeshMaxPeerLinks =
-		MESH_MAX_ESTAB_PLINKS;
-	ifmsh->mshcfg.dot11MeshHWMPactivePathTimeout =
-		MESH_PATH_TIMEOUT;
-	ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval =
-		MESH_PREQ_MIN_INT;
-	ifmsh->mshcfg.dot11MeshHWMPnetDiameterTraversalTime =
-		MESH_DIAM_TRAVERSAL_TIME;
-	ifmsh->mshcfg.dot11MeshHWMPmaxPREQretries =
-		MESH_MAX_PREQ_RETRIES;
-	ifmsh->mshcfg.path_refresh_time =
-		MESH_PATH_REFRESH_TIME;
-	ifmsh->mshcfg.min_discovery_timeout =
-		MESH_MIN_DISCOVERY_TIMEOUT;
 	ifmsh->accepting_plinks = true;
 	ifmsh->preq_id = 0;
 	ifmsh->sn = 0;
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 182942eeac4d..039d7fa0af74 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -175,33 +175,10 @@ struct mesh_rmc {
  */
 #define MESH_CFG_CMP_LEN 	(IEEE80211_MESH_CONFIG_LEN - 2)
 
-/* Default values, timeouts in ms */
-#define MESH_TTL 		31
-#define MESH_MAX_RETR	 	3
-#define MESH_RET_T 		100
-#define MESH_CONF_T 		100
-#define MESH_HOLD_T 		100
-
-#define MESH_PATH_TIMEOUT	5000
-/* Minimum interval between two consecutive PREQs originated by the same
- * interface
- */
-#define MESH_PREQ_MIN_INT	10
-#define MESH_DIAM_TRAVERSAL_TIME 50
-/* A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds before
- * timing out.  This way it will remain ACTIVE and no data frames will be
- * unnecesarily held in the pending queue.
- */
-#define MESH_PATH_REFRESH_TIME			1000
-#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)
 #define MESH_DEFAULT_BEACON_INTERVAL		1000 	/* in 1024 us units */
 
-#define MESH_MAX_PREQ_RETRIES 4
 #define MESH_PATH_EXPIRE (600 * HZ)
 
-/* Default maximum number of established plinks per interface */
-#define MESH_MAX_ESTAB_PLINKS	32
-
 /* Default maximum number of plinks per interface */
 #define MESH_MAX_PLINKS		256
 
@@ -216,8 +193,6 @@ struct mesh_rmc {
 #define PERR_RCODE_NO_ROUTE     12
 #define PERR_RCODE_DEST_UNREACH 13
 
-#define MESH_DEFAULT_ELEMENT_TTL 31
-
 /* Public interfaces */
 /* Various */
 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,