Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

All conflicts were simple overlapping changes except perhaps
for the Thunder driver.

That driver has a change_mtu method explicitly for sending
a message to the hardware.  If that fails it returns an
error.

Normally a driver doesn't need an ndo_change_mtu method becuase those
are usually just range changes, which are now handled generically.
But since this extra operation is needed in the Thunder driver, it has
to stay.

However, if the message send fails we have to restore the original
MTU before the change because the entire call chain expects that if
an error is thrown by ndo_change_mtu then the MTU did not change.
Therefore code is added to nicvf_change_mtu to remember the original
MTU, and to restore it upon nicvf_update_hw_max_frs() failue.

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 27 insertions, 5 deletions

diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 236d47e76ced..1711bae4abf2 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -688,7 +688,7 @@ static void __sta_info_recalc_tim(struct sta_info *sta, bool ignore_pending)
 	}
 
 	/* No need to do anything if the driver does all */
-	if (!local->ops->set_tim)
+	if (ieee80211_hw_check(&local->hw, AP_LINK_PS))
 		return;
 
 	if (sta->dead)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 62ccaf6f585d..2c21b7039136 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1500,7 +1500,6 @@ static bool ieee80211_queue_skb(struct ieee80211_local *local,
 				struct sta_info *sta,
 				struct sk_buff *skb)
 {
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct fq *fq = &local->fq;
 	struct ieee80211_vif *vif;
 	struct txq_info *txqi;
@@ -1525,8 +1524,6 @@ static bool ieee80211_queue_skb(struct ieee80211_local *local,
 	if (!txqi)
 		return false;
 
-	info->control.vif = vif;
-
 	spin_lock_bh(&fq->lock);
 	ieee80211_txq_enqueue(local, txqi, skb);
 	spin_unlock_bh(&fq->lock);
@@ -3238,7 +3235,6 @@ static void ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata,
 
 	if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) {
 		tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
-		*ieee80211_get_qos_ctl(hdr) = tid;
 		hdr->seq_ctrl = ieee80211_tx_next_seq(sta, tid);
 	} else {
 		info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ;
@@ -3363,6 +3359,11 @@ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
 		      (tid_tx ? IEEE80211_TX_CTL_AMPDU : 0);
 	info->control.flags = IEEE80211_TX_CTRL_FAST_XMIT;
 
+	if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) {
+		tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
+		*ieee80211_get_qos_ctl(hdr) = tid;
+	}
+
 	__skb_queue_head_init(&tx.skbs);
 
 	tx.flags = IEEE80211_TX_UNICAST;
@@ -3451,6 +3452,11 @@ begin:
 		goto begin;
 	}
 
+	if (test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags))
+		info->flags |= IEEE80211_TX_CTL_AMPDU;
+	else
+		info->flags &= ~IEEE80211_TX_CTL_AMPDU;
+
 	if (info->control.flags & IEEE80211_TX_CTRL_FAST_XMIT) {
 		struct sta_info *sta = container_of(txq->sta, struct sta_info,
 						    sta);
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index ee715764a828..6832bf6ab69f 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -270,6 +270,22 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
 		vht_cap->vht_mcs.tx_mcs_map |= cpu_to_le16(peer_tx << i * 2);
 	}
 
+	/*
+	 * This is a workaround for VHT-enabled STAs which break the spec
+	 * and have the VHT-MCS Rx map filled in with value 3 for all eight
+	 * spacial streams, an example is AR9462.
+	 *
+	 * As per spec, in section 22.1.1 Introduction to the VHT PHY
+	 * A VHT STA shall support at least single spactial stream VHT-MCSs
+	 * 0 to 7 (transmit and receive) in all supported channel widths.
+	 */
+	if (vht_cap->vht_mcs.rx_mcs_map == cpu_to_le16(0xFFFF)) {
+		vht_cap->vht_supported = false;
+		sdata_info(sdata, "Ignoring VHT IE from %pM due to invalid rx_mcs_map\n",
+			   sta->addr);
+		return;
+	}
+
 	/* finally set up the bandwidth */
 	switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
 	case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: