summaryrefslogtreecommitdiffstats
path: root/net/mac80211
diff options
context:
space:
mode:
authorJohannes Berg <johannes.berg@intel.com>2013-07-31 11:23:06 +0200
committerJohannes Berg <johannes.berg@intel.com>2013-07-31 21:18:10 +0200
commit5cdaed1e878d723d56d04ae0be1738124acf9f46 (patch)
treee198fa62f954cf565dec6ee2fa63d0c742521c2e /net/mac80211
parentcb236d2d713cff83d024a82b836757d9e2b50715 (diff)
downloadlinux-5cdaed1e878d723d56d04ae0be1738124acf9f46.tar.bz2
mac80211: ignore HT primary channel while connected
While we're connected, the AP shouldn't change the primary channel in the HT information. We checked this, and dropped the connection if it did change it. Unfortunately, this is causing problems on some APs, e.g. on the Netgear WRT610NL: the beacons seem to always contain a bad channel and if we made a connection using a probe response (correct data) we drop the connection immediately and can basically not connect properly at all. Work around this by ignoring the HT primary channel information in beacons if we're already connected. Also print out more verbose messages in the other situations to help diagnose similar bugs quicker in the future. Cc: stable@vger.kernel.org [3.10] Acked-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Diffstat (limited to 'net/mac80211')
-rw-r--r--net/mac80211/mlme.c26
1 files changed, 13 insertions, 13 deletions
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e5c3cf405060..077a95360830 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -211,8 +211,9 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
struct ieee80211_channel *channel,
const struct ieee80211_ht_operation *ht_oper,
const struct ieee80211_vht_operation *vht_oper,
- struct cfg80211_chan_def *chandef, bool verbose)
+ struct cfg80211_chan_def *chandef, bool tracking)
{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct cfg80211_chan_def vht_chandef;
u32 ht_cfreq, ret;
@@ -231,7 +232,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
channel->band);
/* check that channel matches the right operating channel */
- if (channel->center_freq != ht_cfreq) {
+ if (!tracking && channel->center_freq != ht_cfreq) {
/*
* It's possible that some APs are confused here;
* Netgear WNDR3700 sometimes reports 4 higher than
@@ -239,11 +240,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
* since we look at probe response/beacon data here
* it should be OK.
*/
- if (verbose)
- sdata_info(sdata,
- "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
- channel->center_freq, ht_cfreq,
- ht_oper->primary_chan, channel->band);
+ sdata_info(sdata,
+ "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+ channel->center_freq, ht_cfreq,
+ ht_oper->primary_chan, channel->band);
ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
goto out;
}
@@ -297,7 +297,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
channel->band);
break;
default:
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT operation IE has invalid channel width (%d), disable VHT\n",
vht_oper->chan_width);
@@ -306,7 +306,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
}
if (!cfg80211_chandef_valid(&vht_chandef)) {
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT information is invalid, disable VHT\n");
ret = IEEE80211_STA_DISABLE_VHT;
@@ -319,7 +319,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
}
if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT information doesn't match HT, disable VHT\n");
ret = IEEE80211_STA_DISABLE_VHT;
@@ -346,7 +346,7 @@ out:
ret |= chandef_downgrade(chandef);
}
- if (chandef->width != vht_chandef.width && verbose)
+ if (chandef->width != vht_chandef.width && !tracking)
sdata_info(sdata,
"capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
@@ -386,7 +386,7 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
/* calculate new channel (type) based on HT/VHT operation IEs */
flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper,
- vht_oper, &chandef, false);
+ vht_oper, &chandef, true);
/*
* Downgrade the new channel if we associated with restricted
@@ -3838,7 +3838,7 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
cbss->channel,
ht_oper, vht_oper,
- &chandef, true);
+ &chandef, false);
sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
local->rx_chains);