Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 774 insertions, 0 deletions

diff --git a/net/irda/qos.c b/net/irda/qos.c
new file mode 100644
index 000000000000..df732d56cc57
--- /dev/null
+++ b/net/irda/qos.c
@@ -0,0 +1,774 @@
+/*********************************************************************
+ *                                
+ * Filename:      qos.c
+ * Version:       1.0
+ * Description:   IrLAP QoS parameter negotiation
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Sep  9 00:00:26 1997
+ * Modified at:   Sun Jan 30 14:29:16 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/parameters.h>
+#include <net/irda/qos.h>
+#include <net/irda/irlap.h>
+
+/*
+ * Maximum values of the baud rate we negociate with the other end.
+ * Most often, you don't have to change that, because Linux-IrDA will
+ * use the maximum offered by the link layer, which usually works fine.
+ * In some very rare cases, you may want to limit it to lower speeds...
+ */
+int sysctl_max_baud_rate = 16000000;
+/*
+ * Maximum value of the lap disconnect timer we negociate with the other end.
+ * Most often, the value below represent the best compromise, but some user
+ * may want to keep the LAP alive longuer or shorter in case of link failure.
+ * Remember that the threshold time (early warning) is fixed to 3s...
+ */
+int sysctl_max_noreply_time = 12;
+/*
+ * Minimum turn time to be applied before transmitting to the peer.
+ * Nonzero values (usec) are used as lower limit to the per-connection
+ * mtt value which was announced by the other end during negotiation.
+ * Might be helpful if the peer device provides too short mtt.
+ * Default is 10us which means using the unmodified value given by the
+ * peer except if it's 0 (0 is likely a bug in the other stack).
+ */
+unsigned sysctl_min_tx_turn_time = 10;
+/*
+ * Maximum data size to be used in transmission in payload of LAP frame.
+ * There is a bit of confusion in the IrDA spec :
+ * The LAP spec defines the payload of a LAP frame (I field) to be
+ * 2048 bytes max (IrLAP 1.1, chapt 6.6.5, p40).
+ * On the other hand, the PHY mention frames of 2048 bytes max (IrPHY
+ * 1.2, chapt 5.3.2.1, p41). But, this number includes the LAP header
+ * (2 bytes), and CRC (32 bits at 4 Mb/s). So, for the I field (LAP
+ * payload), that's only 2042 bytes. Oups !
+ * My nsc-ircc hardware has troubles receiving 2048 bytes frames at 4 Mb/s,
+ * so adjust to 2042... I don't know if this bug applies only for 2048
+ * bytes frames or all negotiated frame sizes, but you can use the sysctl
+ * to play with this value anyway.
+ * Jean II */
+unsigned sysctl_max_tx_data_size = 2042;
+/*
+ * Maximum transmit window, i.e. number of LAP frames between turn-around.
+ * This allow to override what the peer told us. Some peers are buggy and
+ * don't always support what they tell us.
+ * Jean II */
+unsigned sysctl_max_tx_window = 7;
+
+static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get);
+static int irlap_param_link_disconnect(void *instance, irda_param_t *parm, 
+				       int get);
+static int irlap_param_max_turn_time(void *instance, irda_param_t *param, 
+				     int get);
+static int irlap_param_data_size(void *instance, irda_param_t *param, int get);
+static int irlap_param_window_size(void *instance, irda_param_t *param, 
+				   int get);
+static int irlap_param_additional_bofs(void *instance, irda_param_t *parm, 
+				       int get);
+static int irlap_param_min_turn_time(void *instance, irda_param_t *param, 
+				     int get);
+
+#ifndef CONFIG_IRDA_DYNAMIC_WINDOW
+static __u32 irlap_requested_line_capacity(struct qos_info *qos);
+#endif
+
+static __u32 min_turn_times[]  = { 10000, 5000, 1000, 500, 100, 50, 10, 0 }; /* us */
+static __u32 baud_rates[]      = { 2400, 9600, 19200, 38400, 57600, 115200, 576000, 
+				   1152000, 4000000, 16000000 };           /* bps */
+static __u32 data_sizes[]      = { 64, 128, 256, 512, 1024, 2048 };        /* bytes */
+static __u32 add_bofs[]        = { 48, 24, 12, 5, 3, 2, 1, 0 };            /* bytes */
+static __u32 max_turn_times[]  = { 500, 250, 100, 50 };                    /* ms */
+static __u32 link_disc_times[] = { 3, 8, 12, 16, 20, 25, 30, 40 };         /* secs */
+
+static __u32 max_line_capacities[10][4] = {
+       /* 500 ms     250 ms  100 ms  50 ms (max turn time) */
+	{    100,      0,      0,     0 }, /*     2400 bps */
+	{    400,      0,      0,     0 }, /*     9600 bps */
+	{    800,      0,      0,     0 }, /*    19200 bps */
+	{   1600,      0,      0,     0 }, /*    38400 bps */
+	{   2360,      0,      0,     0 }, /*    57600 bps */
+	{   4800,   2400,    960,   480 }, /*   115200 bps */
+	{  28800,  11520,   5760,  2880 }, /*   576000 bps */
+	{  57600,  28800,  11520,  5760 }, /*  1152000 bps */
+	{ 200000, 100000,  40000, 20000 }, /*  4000000 bps */
+	{ 800000, 400000, 160000, 80000 }, /* 16000000 bps */
+};
+
+static pi_minor_info_t pi_minor_call_table_type_0[] = {
+	{ NULL, 0 },
+/* 01 */{ irlap_param_baud_rate,       PV_INTEGER | PV_LITTLE_ENDIAN },
+	{ NULL, 0 },
+	{ NULL, 0 },
+	{ NULL, 0 },
+	{ NULL, 0 },
+	{ NULL, 0 },
+	{ NULL, 0 },
+/* 08 */{ irlap_param_link_disconnect, PV_INT_8_BITS }
+};
+
+static pi_minor_info_t pi_minor_call_table_type_1[] = {
+	{ NULL, 0 },
+	{ NULL, 0 },
+/* 82 */{ irlap_param_max_turn_time,   PV_INT_8_BITS },
+/* 83 */{ irlap_param_data_size,       PV_INT_8_BITS },
+/* 84 */{ irlap_param_window_size,     PV_INT_8_BITS },
+/* 85 */{ irlap_param_additional_bofs, PV_INT_8_BITS },
+/* 86 */{ irlap_param_min_turn_time,   PV_INT_8_BITS },
+};
+
+static pi_major_info_t pi_major_call_table[] = {
+	{ pi_minor_call_table_type_0, 9 },
+	{ pi_minor_call_table_type_1, 7 },
+};
+
+static pi_param_info_t irlap_param_info = { pi_major_call_table, 2, 0x7f, 7 };
+
+/* ---------------------- LOCAL SUBROUTINES ---------------------- */
+/* Note : we start with a bunch of local subroutines.
+ * As the compiler is "one pass", this is the only way to get them to
+ * inline properly...
+ * Jean II
+ */
+/*
+ * Function value_index (value, array, size)
+ *
+ *    Returns the index to the value in the specified array
+ */
+static inline int value_index(__u32 value, __u32 *array, int size)
+{
+	int i;
+	
+	for (i=0; i < size; i++)
+		if (array[i] == value)
+			break;
+	return i;
+}
+
+/*
+ * Function index_value (index, array)
+ *
+ *    Returns value to index in array, easy!
+ *
+ */
+static inline __u32 index_value(int index, __u32 *array) 
+{
+	return array[index];
+}
+
+/*
+ * Function msb_index (word)
+ *
+ *    Returns index to most significant bit (MSB) in word
+ *
+ */
+static int msb_index (__u16 word) 
+{
+	__u16 msb = 0x8000;
+	int index = 15;   /* Current MSB */
+
+	/* Check for buggy peers.
+	 * Note : there is a small probability that it could be us, but I
+	 * would expect driver authors to catch that pretty early and be
+	 * able to check precisely what's going on. If a end user sees this,
+	 * it's very likely the peer. - Jean II */
+	if (word == 0) {
+		IRDA_WARNING("%s(), Detected buggy peer, adjust null PV to 0x1!\n",
+			 __FUNCTION__);
+		/* The only safe choice (we don't know the array size) */
+		word = 0x1;
+	}
+
+	while (msb) {
+		if (word & msb)
+			break;   /* Found it! */
+		msb >>=1;
+		index--;
+	}
+	return index;
+}
+
+/*
+ * Function value_lower_bits (value, array)
+ *
+ *    Returns a bit field marking all possibility lower than value.
+ */
+static inline int value_lower_bits(__u32 value, __u32 *array, int size, __u16 *field)
+{
+	int	i;
+	__u16	mask = 0x1;
+	__u16	result = 0x0;
+
+	for (i=0; i < size; i++) {
+		/* Add the current value to the bit field, shift mask */
+		result |= mask;
+		mask <<= 1;
+		/* Finished ? */
+		if (array[i] >= value)
+			break;
+	}
+	/* Send back a valid index */
+	if(i >= size)
+	  i = size - 1;	/* Last item */
+	*field = result;
+	return i;
+}
+
+/*
+ * Function value_highest_bit (value, array)
+ *
+ *    Returns a bit field marking the highest possibility lower than value.
+ */
+static inline int value_highest_bit(__u32 value, __u32 *array, int size, __u16 *field)
+{
+	int	i;
+	__u16	mask = 0x1;
+	__u16	result = 0x0;
+
+	for (i=0; i < size; i++) {
+		/* Finished ? */
+		if (array[i] <= value)
+			break;
+		/* Shift mask */
+		mask <<= 1;
+	}
+	/* Set the current value to the bit field */
+	result |= mask;
+	/* Send back a valid index */
+	if(i >= size)
+	  i = size - 1;	/* Last item */
+	*field = result;
+	return i;
+}
+
+/* -------------------------- MAIN CALLS -------------------------- */
+
+/*
+ * Function irda_qos_compute_intersection (qos, new)
+ *
+ *    Compute the intersection of the old QoS capabilities with new ones
+ *
+ */
+void irda_qos_compute_intersection(struct qos_info *qos, struct qos_info *new)
+{
+	IRDA_ASSERT(qos != NULL, return;);
+	IRDA_ASSERT(new != NULL, return;);
+
+	/* Apply */
+	qos->baud_rate.bits       &= new->baud_rate.bits;
+	qos->window_size.bits     &= new->window_size.bits;
+	qos->min_turn_time.bits   &= new->min_turn_time.bits;
+	qos->max_turn_time.bits   &= new->max_turn_time.bits;
+	qos->data_size.bits       &= new->data_size.bits;
+	qos->link_disc_time.bits  &= new->link_disc_time.bits;
+	qos->additional_bofs.bits &= new->additional_bofs.bits;
+
+	irda_qos_bits_to_value(qos);
+}
+
+/*
+ * Function irda_init_max_qos_capabilies (qos)
+ *
+ *    The purpose of this function is for layers and drivers to be able to
+ *    set the maximum QoS possible and then "and in" their own limitations
+ * 
+ */
+void irda_init_max_qos_capabilies(struct qos_info *qos)
+{
+	int i;
+	/* 
+	 *  These are the maximum supported values as specified on pages
+	 *  39-43 in IrLAP
+	 */
+
+	/* Use sysctl to set some configurable values... */
+	/* Set configured max speed */
+	i = value_lower_bits(sysctl_max_baud_rate, baud_rates, 10,
+			     &qos->baud_rate.bits);
+	sysctl_max_baud_rate = index_value(i, baud_rates);
+
+	/* Set configured max disc time */
+	i = value_lower_bits(sysctl_max_noreply_time, link_disc_times, 8,
+			     &qos->link_disc_time.bits);
+	sysctl_max_noreply_time = index_value(i, link_disc_times);
+
+	/* LSB is first byte, MSB is second byte */
+	qos->baud_rate.bits    &= 0x03ff;
+
+	qos->window_size.bits     = 0x7f;
+	qos->min_turn_time.bits   = 0xff;
+	qos->max_turn_time.bits   = 0x0f;
+	qos->data_size.bits       = 0x3f;
+	qos->link_disc_time.bits &= 0xff;
+	qos->additional_bofs.bits = 0xff;
+}
+EXPORT_SYMBOL(irda_init_max_qos_capabilies);
+
+/*
+ * Function irlap_adjust_qos_settings (qos)
+ *
+ *     Adjust QoS settings in case some values are not possible to use because
+ *     of other settings
+ */
+static void irlap_adjust_qos_settings(struct qos_info *qos)
+{
+	__u32 line_capacity;
+	int index;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	/*
+	 * Make sure the mintt is sensible.
+	 * Main culprit : Ericsson T39. - Jean II
+	 */
+	if (sysctl_min_tx_turn_time > qos->min_turn_time.value) {
+		int i;
+
+		IRDA_WARNING("%s(), Detected buggy peer, adjust mtt to %dus!\n",
+			 __FUNCTION__, sysctl_min_tx_turn_time);
+
+		/* We don't really need bits, but easier this way */
+		i = value_highest_bit(sysctl_min_tx_turn_time, min_turn_times,
+				      8, &qos->min_turn_time.bits);
+		sysctl_min_tx_turn_time = index_value(i, min_turn_times);
+		qos->min_turn_time.value = sysctl_min_tx_turn_time;
+	}
+
+	/* 
+	 * Not allowed to use a max turn time less than 500 ms if the baudrate
+	 * is less than 115200
+	 */
+	if ((qos->baud_rate.value < 115200) && 
+	    (qos->max_turn_time.value < 500))
+	{
+		IRDA_DEBUG(0, 
+			   "%s(), adjusting max turn time from %d to 500 ms\n",
+			   __FUNCTION__, qos->max_turn_time.value);
+		qos->max_turn_time.value = 500;
+	}
+	
+	/*
+	 * The data size must be adjusted according to the baud rate and max 
+	 * turn time
+	 */
+	index = value_index(qos->data_size.value, data_sizes, 6);
+	line_capacity = irlap_max_line_capacity(qos->baud_rate.value, 
+						qos->max_turn_time.value);
+
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+	while ((qos->data_size.value > line_capacity) && (index > 0)) {
+		qos->data_size.value = data_sizes[index--];
+		IRDA_DEBUG(2, "%s(), reducing data size to %d\n",
+			   __FUNCTION__, qos->data_size.value);
+	}
+#else /* Use method described in section 6.6.11 of IrLAP */
+	while (irlap_requested_line_capacity(qos) > line_capacity) {
+		IRDA_ASSERT(index != 0, return;);
+
+		/* Must be able to send at least one frame */
+		if (qos->window_size.value > 1) {
+			qos->window_size.value--;
+			IRDA_DEBUG(2, "%s(), reducing window size to %d\n",
+				   __FUNCTION__, qos->window_size.value);
+		} else if (index > 1) {
+			qos->data_size.value = data_sizes[index--];
+			IRDA_DEBUG(2, "%s(), reducing data size to %d\n",
+				   __FUNCTION__, qos->data_size.value);
+		} else {
+			IRDA_WARNING("%s(), nothing more we can do!\n",
+				     __FUNCTION__);
+		}
+	}
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+	/*
+	 * Fix tx data size according to user limits - Jean II
+	 */
+	if (qos->data_size.value > sysctl_max_tx_data_size)
+		/* Allow non discrete adjustement to avoid loosing capacity */
+		qos->data_size.value = sysctl_max_tx_data_size;
+	/*
+	 * Override Tx window if user request it. - Jean II
+	 */
+	if (qos->window_size.value > sysctl_max_tx_window)
+		qos->window_size.value = sysctl_max_tx_window;
+}
+
+/*
+ * Function irlap_negotiate (qos_device, qos_session, skb)
+ *
+ *    Negotiate QoS values, not really that much negotiation :-)
+ *    We just set the QoS capabilities for the peer station
+ *
+ */
+int irlap_qos_negotiate(struct irlap_cb *self, struct sk_buff *skb) 
+{
+	int ret;
+	
+	ret = irda_param_extract_all(self, skb->data, skb->len, 
+				     &irlap_param_info);
+	
+	/* Convert the negotiated bits to values */
+	irda_qos_bits_to_value(&self->qos_tx);
+	irda_qos_bits_to_value(&self->qos_rx);
+
+	irlap_adjust_qos_settings(&self->qos_tx);
+
+	IRDA_DEBUG(2, "Setting BAUD_RATE to %d bps.\n", 
+		   self->qos_tx.baud_rate.value);
+	IRDA_DEBUG(2, "Setting DATA_SIZE to %d bytes\n",
+		   self->qos_tx.data_size.value);
+	IRDA_DEBUG(2, "Setting WINDOW_SIZE to %d\n", 
+		   self->qos_tx.window_size.value);
+	IRDA_DEBUG(2, "Setting XBOFS to %d\n", 
+		   self->qos_tx.additional_bofs.value);
+	IRDA_DEBUG(2, "Setting MAX_TURN_TIME to %d ms.\n",
+		   self->qos_tx.max_turn_time.value);
+	IRDA_DEBUG(2, "Setting MIN_TURN_TIME to %d usecs.\n",
+		   self->qos_tx.min_turn_time.value);
+	IRDA_DEBUG(2, "Setting LINK_DISC to %d secs.\n", 
+		   self->qos_tx.link_disc_time.value);
+	return ret;
+}
+
+/*
+ * Function irlap_insert_negotiation_params (qos, fp)
+ *
+ *    Insert QoS negotiaion pararameters into frame
+ *
+ */
+int irlap_insert_qos_negotiation_params(struct irlap_cb *self, 
+					struct sk_buff *skb)
+{
+	int ret;
+
+	/* Insert data rate */
+	ret = irda_param_insert(self, PI_BAUD_RATE, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert max turnaround time */
+	ret = irda_param_insert(self, PI_MAX_TURN_TIME, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert data size */
+	ret = irda_param_insert(self, PI_DATA_SIZE, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert window size */
+	ret = irda_param_insert(self, PI_WINDOW_SIZE, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert additional BOFs */
+	ret = irda_param_insert(self, PI_ADD_BOFS, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert minimum turnaround time */
+	ret = irda_param_insert(self, PI_MIN_TURN_TIME, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert link disconnect/threshold time */
+	ret = irda_param_insert(self, PI_LINK_DISC, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_baud_rate (instance, param, get)
+ *
+ *    Negotiate data-rate
+ *
+ */
+static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get)
+{
+	__u16 final;
+
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+	if (get) {
+		param->pv.i = self->qos_rx.baud_rate.bits;
+		IRDA_DEBUG(2, "%s(), baud rate = 0x%02x\n", 
+			   __FUNCTION__, param->pv.i);		
+	} else {
+		/* 
+		 *  Stations must agree on baud rate, so calculate
+		 *  intersection 
+		 */
+		IRDA_DEBUG(2, "Requested BAUD_RATE: 0x%04x\n", (__u16) param->pv.i);
+		final = (__u16) param->pv.i & self->qos_rx.baud_rate.bits;
+
+		IRDA_DEBUG(2, "Final BAUD_RATE: 0x%04x\n", final);
+		self->qos_tx.baud_rate.bits = final;
+		self->qos_rx.baud_rate.bits = final;
+	}
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_link_disconnect (instance, param, get)
+ *
+ *    Negotiate link disconnect/threshold time. 
+ *
+ */
+static int irlap_param_link_disconnect(void *instance, irda_param_t *param, 
+				       int get)
+{
+	__u16 final;
+	
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.link_disc_time.bits;
+	else {
+		/*  
+		 *  Stations must agree on link disconnect/threshold 
+		 *  time.
+		 */
+		IRDA_DEBUG(2, "LINK_DISC: %02x\n", (__u8) param->pv.i);
+		final = (__u8) param->pv.i & self->qos_rx.link_disc_time.bits;
+
+		IRDA_DEBUG(2, "Final LINK_DISC: %02x\n", final);
+		self->qos_tx.link_disc_time.bits = final;
+		self->qos_rx.link_disc_time.bits = final;
+	}
+	return 0;
+}
+
+/*
+ * Function irlap_param_max_turn_time (instance, param, get)
+ *
+ *    Negotiate the maximum turnaround time. This is a type 1 parameter and
+ *    will be negotiated independently for each station
+ *
+ */
+static int irlap_param_max_turn_time(void *instance, irda_param_t *param, 
+				     int get)
+{
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.max_turn_time.bits;
+	else
+		self->qos_tx.max_turn_time.bits = (__u8) param->pv.i;
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_data_size (instance, param, get)
+ *
+ *    Negotiate the data size. This is a type 1 parameter and
+ *    will be negotiated independently for each station
+ *
+ */
+static int irlap_param_data_size(void *instance, irda_param_t *param, int get)
+{
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.data_size.bits;
+	else
+		self->qos_tx.data_size.bits = (__u8) param->pv.i;
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_window_size (instance, param, get)
+ *
+ *    Negotiate the window size. This is a type 1 parameter and
+ *    will be negotiated independently for each station
+ *
+ */
+static int irlap_param_window_size(void *instance, irda_param_t *param, 
+				   int get)
+{
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.window_size.bits;
+	else
+		self->qos_tx.window_size.bits = (__u8) param->pv.i;
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_additional_bofs (instance, param, get)
+ *
+ *    Negotiate additional BOF characters. This is a type 1 parameter and
+ *    will be negotiated independently for each station.
+ */
+static int irlap_param_additional_bofs(void *instance, irda_param_t *param, int get)
+{
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.additional_bofs.bits;
+	else
+		self->qos_tx.additional_bofs.bits = (__u8) param->pv.i;
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_min_turn_time (instance, param, get)
+ *
+ *    Negotiate the minimum turn around time. This is a type 1 parameter and
+ *    will be negotiated independently for each station
+ */
+static int irlap_param_min_turn_time(void *instance, irda_param_t *param, 
+				     int get)
+{
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.min_turn_time.bits;
+	else
+		self->qos_tx.min_turn_time.bits = (__u8) param->pv.i;
+
+	return 0;
+}
+
+/*
+ * Function irlap_max_line_capacity (speed, max_turn_time, min_turn_time)
+ *
+ *    Calculate the maximum line capacity
+ *
+ */
+__u32 irlap_max_line_capacity(__u32 speed, __u32 max_turn_time)
+{
+	__u32 line_capacity;
+	int i,j;
+
+	IRDA_DEBUG(2, "%s(), speed=%d, max_turn_time=%d\n",
+		   __FUNCTION__, speed, max_turn_time);
+
+	i = value_index(speed, baud_rates, 10);
+	j = value_index(max_turn_time, max_turn_times, 4);
+
+	IRDA_ASSERT(((i >=0) && (i <10)), return 0;);
+	IRDA_ASSERT(((j >=0) && (j <4)), return 0;);
+
+	line_capacity = max_line_capacities[i][j];
+
+	IRDA_DEBUG(2, "%s(), line capacity=%d bytes\n", 
+		   __FUNCTION__, line_capacity);
+	
+	return line_capacity;
+}
+
+#ifndef CONFIG_IRDA_DYNAMIC_WINDOW
+static __u32 irlap_requested_line_capacity(struct qos_info *qos)
+{
+	__u32 line_capacity;
+
+	line_capacity = qos->window_size.value *
+		(qos->data_size.value + 6 + qos->additional_bofs.value) +
+		irlap_min_turn_time_in_bytes(qos->baud_rate.value,
+					     qos->min_turn_time.value);
+
+	IRDA_DEBUG(2, "%s(), requested line capacity=%d\n",
+		   __FUNCTION__, line_capacity);
+
+	return line_capacity;
+}
+#endif
+
+void irda_qos_bits_to_value(struct qos_info *qos)
+{
+	int index;
+
+	IRDA_ASSERT(qos != NULL, return;);
+	
+	index = msb_index(qos->baud_rate.bits);
+	qos->baud_rate.value = baud_rates[index];
+
+	index = msb_index(qos->data_size.bits);
+	qos->data_size.value = data_sizes[index];
+
+	index = msb_index(qos->window_size.bits);
+	qos->window_size.value = index+1;
+
+	index = msb_index(qos->min_turn_time.bits);
+	qos->min_turn_time.value = min_turn_times[index];
+	
+	index = msb_index(qos->max_turn_time.bits);
+	qos->max_turn_time.value = max_turn_times[index];
+
+	index = msb_index(qos->link_disc_time.bits);
+	qos->link_disc_time.value = link_disc_times[index];
+	
+	index = msb_index(qos->additional_bofs.bits);
+	qos->additional_bofs.value = add_bofs[index];
+}
+EXPORT_SYMBOL(irda_qos_bits_to_value);