summaryrefslogtreecommitdiffstats
path: root/net/ipv6
diff options
context:
space:
mode:
authorEric Dumazet <edumazet@google.com>2022-04-22 13:12:37 -0700
committerJakub Kicinski <kuba@kernel.org>2022-04-26 17:05:59 -0700
commit68822bdf76f10c3dc80609d4e2cdc1e847429086 (patch)
tree87d60a9e0867994b99136771d3f38718403ba50e /net/ipv6
parent561215482cc69d1c758944d4463b3d5d96d37bd1 (diff)
downloadlinux-68822bdf76f10c3dc80609d4e2cdc1e847429086.tar.bz2
net: generalize skb freeing deferral to per-cpu lists
Logic added in commit f35f821935d8 ("tcp: defer skb freeing after socket lock is released") helped bulk TCP flows to move the cost of skbs frees outside of critical section where socket lock was held. But for RPC traffic, or hosts with RFS enabled, the solution is far from being ideal. For RPC traffic, recvmsg() has to return to user space right after skb payload has been consumed, meaning that BH handler has no chance to pick the skb before recvmsg() thread. This issue is more visible with BIG TCP, as more RPC fit one skb. For RFS, even if BH handler picks the skbs, they are still picked from the cpu on which user thread is running. Ideally, it is better to free the skbs (and associated page frags) on the cpu that originally allocated them. This patch removes the per socket anchor (sk->defer_list) and instead uses a per-cpu list, which will hold more skbs per round. This new per-cpu list is drained at the end of net_action_rx(), after incoming packets have been processed, to lower latencies. In normal conditions, skbs are added to the per-cpu list with no further action. In the (unlikely) cases where the cpu does not run net_action_rx() handler fast enough, we use an IPI to raise NET_RX_SOFTIRQ on the remote cpu. Also, we do not bother draining the per-cpu list from dev_cpu_dead() This is because skbs in this list have no requirement on how fast they should be freed. Note that we can add in the future a small per-cpu cache if we see any contention on sd->defer_lock. Tested on a pair of hosts with 100Gbit NIC, RFS enabled, and /proc/sys/net/ipv4/tcp_rmem[2] tuned to 16MB to work around page recycling strategy used by NIC driver (its page pool capacity being too small compared to number of skbs/pages held in sockets receive queues) Note that this tuning was only done to demonstrate worse conditions for skb freeing for this particular test. These conditions can happen in more general production workload. 10 runs of one TCP_STREAM flow Before: Average throughput: 49685 Mbit. Kernel profiles on cpu running user thread recvmsg() show high cost for skb freeing related functions (*) 57.81% [kernel] [k] copy_user_enhanced_fast_string (*) 12.87% [kernel] [k] skb_release_data (*) 4.25% [kernel] [k] __free_one_page (*) 3.57% [kernel] [k] __list_del_entry_valid 1.85% [kernel] [k] __netif_receive_skb_core 1.60% [kernel] [k] __skb_datagram_iter (*) 1.59% [kernel] [k] free_unref_page_commit (*) 1.16% [kernel] [k] __slab_free 1.16% [kernel] [k] _copy_to_iter (*) 1.01% [kernel] [k] kfree (*) 0.88% [kernel] [k] free_unref_page 0.57% [kernel] [k] ip6_rcv_core 0.55% [kernel] [k] ip6t_do_table 0.54% [kernel] [k] flush_smp_call_function_queue (*) 0.54% [kernel] [k] free_pcppages_bulk 0.51% [kernel] [k] llist_reverse_order 0.38% [kernel] [k] process_backlog (*) 0.38% [kernel] [k] free_pcp_prepare 0.37% [kernel] [k] tcp_recvmsg_locked (*) 0.37% [kernel] [k] __list_add_valid 0.34% [kernel] [k] sock_rfree 0.34% [kernel] [k] _raw_spin_lock_irq (*) 0.33% [kernel] [k] __page_cache_release 0.33% [kernel] [k] tcp_v6_rcv (*) 0.33% [kernel] [k] __put_page (*) 0.29% [kernel] [k] __mod_zone_page_state 0.27% [kernel] [k] _raw_spin_lock After patch: Average throughput: 73076 Mbit. Kernel profiles on cpu running user thread recvmsg() looks better: 81.35% [kernel] [k] copy_user_enhanced_fast_string 1.95% [kernel] [k] _copy_to_iter 1.95% [kernel] [k] __skb_datagram_iter 1.27% [kernel] [k] __netif_receive_skb_core 1.03% [kernel] [k] ip6t_do_table 0.60% [kernel] [k] sock_rfree 0.50% [kernel] [k] tcp_v6_rcv 0.47% [kernel] [k] ip6_rcv_core 0.45% [kernel] [k] read_tsc 0.44% [kernel] [k] _raw_spin_lock_irqsave 0.37% [kernel] [k] _raw_spin_lock 0.37% [kernel] [k] native_irq_return_iret 0.33% [kernel] [k] __inet6_lookup_established 0.31% [kernel] [k] ip6_protocol_deliver_rcu 0.29% [kernel] [k] tcp_rcv_established 0.29% [kernel] [k] llist_reverse_order v2: kdoc issue (kernel bots) do not defer if (alloc_cpu == smp_processor_id()) (Paolo) replace the sk_buff_head with a single-linked list (Jakub) add a READ_ONCE()/WRITE_ONCE() for the lockless read of sd->defer_list Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220422201237.416238-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'net/ipv6')
-rw-r--r--net/ipv6/tcp_ipv6.c1
1 files changed, 0 insertions, 1 deletions
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 54277de7474b..60bdec257ba7 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1728,7 +1728,6 @@ process:
sk_incoming_cpu_update(sk);
- sk_defer_free_flush(sk);
bh_lock_sock_nested(sk);
tcp_segs_in(tcp_sk(sk), skb);
ret = 0;