diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-05-30 21:11:22 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-05-30 21:11:22 -0700 |
commit | 036e34310931e64ce4f1edead435708cd517db10 (patch) | |
tree | 7bd50541ef391bf0699b5d016a7a6fd697a5fdfa /net/dsa | |
parent | adc3f554fa1e0f1c7b76007150814e1d8a5fcd2b (diff) | |
parent | 100f6d8e09905c59be45b6316f8f369c0be1b2d8 (diff) | |
download | linux-036e34310931e64ce4f1edead435708cd517db10.tar.bz2 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix OOPS during nf_tables rule dump, from Florian Westphal.
2) Use after free in ip_vs_in, from Yue Haibing.
3) Fix various kTLS bugs (NULL deref during device removal resync,
netdev notification ignoring, etc.) From Jakub Kicinski.
4) Fix ipv6 redirects with VRF, from David Ahern.
5) Memory leak fix in igmpv3_del_delrec(), from Eric Dumazet.
6) Missing memory allocation failure check in ip6_ra_control(), from
Gen Zhang. And likewise fix ip_ra_control().
7) TX clean budget logic error in aquantia, from Igor Russkikh.
8) SKB leak in llc_build_and_send_ui_pkt(), from Eric Dumazet.
9) Double frees in mlx5, from Parav Pandit.
10) Fix lost MAC address in r8169 during PCI D3, from Heiner Kallweit.
11) Fix botched register access in mvpp2, from Antoine Tenart.
12) Use after free in napi_gro_frags(), from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (89 commits)
net: correct zerocopy refcnt with udp MSG_MORE
ethtool: Check for vlan etype or vlan tci when parsing flow_rule
net: don't clear sock->sk early to avoid trouble in strparser
net-gro: fix use-after-free read in napi_gro_frags()
net: dsa: tag_8021q: Create a stable binary format
net: dsa: tag_8021q: Change order of rx_vid setup
net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value
ipv4: tcp_input: fix stack out of bounds when parsing TCP options.
mlxsw: spectrum: Prevent force of 56G
mlxsw: spectrum_acl: Avoid warning after identical rules insertion
net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT
r8169: fix MAC address being lost in PCI D3
net: core: support XDP generic on stacked devices.
netvsc: unshare skb in VF rx handler
udp: Avoid post-GRO UDP checksum recalculation
net: phy: dp83867: Set up RGMII TX delay
net: phy: dp83867: do not call config_init twice
net: phy: dp83867: increase SGMII autoneg timer duration
net: phy: dp83867: fix speed 10 in sgmii mode
net: phy: marvell10g: report if the PHY fails to boot firmware
...
Diffstat (limited to 'net/dsa')
-rw-r--r-- | net/dsa/tag_8021q.c | 79 |
1 files changed, 65 insertions, 14 deletions
diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c index 8ae48c7e1e76..65a35e976d7b 100644 --- a/net/dsa/tag_8021q.c +++ b/net/dsa/tag_8021q.c @@ -11,20 +11,59 @@ #include "dsa_priv.h" -/* Allocating two VLAN tags per port - one for the RX VID and - * the other for the TX VID - see below +/* Binary structure of the fake 12-bit VID field (when the TPID is + * ETH_P_DSA_8021Q): + * + * | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + * +-----------+-----+-----------------+-----------+-----------------------+ + * | DIR | RSV | SWITCH_ID | RSV | PORT | + * +-----------+-----+-----------------+-----------+-----------------------+ + * + * DIR - VID[11:10]: + * Direction flags. + * * 1 (0b01) for RX VLAN, + * * 2 (0b10) for TX VLAN. + * These values make the special VIDs of 0, 1 and 4095 to be left + * unused by this coding scheme. + * + * RSV - VID[9]: + * To be used for further expansion of SWITCH_ID or for other purposes. + * + * SWITCH_ID - VID[8:6]: + * Index of switch within DSA tree. Must be between 0 and + * DSA_MAX_SWITCHES - 1. + * + * RSV - VID[5:4]: + * To be used for further expansion of PORT or for other purposes. + * + * PORT - VID[3:0]: + * Index of switch port. Must be between 0 and DSA_MAX_PORTS - 1. */ -#define DSA_8021Q_VID_RANGE (DSA_MAX_SWITCHES * DSA_MAX_PORTS) -#define DSA_8021Q_VID_BASE (VLAN_N_VID - 2 * DSA_8021Q_VID_RANGE - 1) -#define DSA_8021Q_RX_VID_BASE (DSA_8021Q_VID_BASE) -#define DSA_8021Q_TX_VID_BASE (DSA_8021Q_VID_BASE + DSA_8021Q_VID_RANGE) + +#define DSA_8021Q_DIR_SHIFT 10 +#define DSA_8021Q_DIR_MASK GENMASK(11, 10) +#define DSA_8021Q_DIR(x) (((x) << DSA_8021Q_DIR_SHIFT) & \ + DSA_8021Q_DIR_MASK) +#define DSA_8021Q_DIR_RX DSA_8021Q_DIR(1) +#define DSA_8021Q_DIR_TX DSA_8021Q_DIR(2) + +#define DSA_8021Q_SWITCH_ID_SHIFT 6 +#define DSA_8021Q_SWITCH_ID_MASK GENMASK(8, 6) +#define DSA_8021Q_SWITCH_ID(x) (((x) << DSA_8021Q_SWITCH_ID_SHIFT) & \ + DSA_8021Q_SWITCH_ID_MASK) + +#define DSA_8021Q_PORT_SHIFT 0 +#define DSA_8021Q_PORT_MASK GENMASK(3, 0) +#define DSA_8021Q_PORT(x) (((x) << DSA_8021Q_PORT_SHIFT) & \ + DSA_8021Q_PORT_MASK) /* Returns the VID to be inserted into the frame from xmit for switch steering * instructions on egress. Encodes switch ID and port ID. */ u16 dsa_8021q_tx_vid(struct dsa_switch *ds, int port) { - return DSA_8021Q_TX_VID_BASE + (DSA_MAX_PORTS * ds->index) + port; + return DSA_8021Q_DIR_TX | DSA_8021Q_SWITCH_ID(ds->index) | + DSA_8021Q_PORT(port); } EXPORT_SYMBOL_GPL(dsa_8021q_tx_vid); @@ -33,21 +72,22 @@ EXPORT_SYMBOL_GPL(dsa_8021q_tx_vid); */ u16 dsa_8021q_rx_vid(struct dsa_switch *ds, int port) { - return DSA_8021Q_RX_VID_BASE + (DSA_MAX_PORTS * ds->index) + port; + return DSA_8021Q_DIR_RX | DSA_8021Q_SWITCH_ID(ds->index) | + DSA_8021Q_PORT(port); } EXPORT_SYMBOL_GPL(dsa_8021q_rx_vid); /* Returns the decoded switch ID from the RX VID. */ int dsa_8021q_rx_switch_id(u16 vid) { - return ((vid - DSA_8021Q_RX_VID_BASE) / DSA_MAX_PORTS); + return (vid & DSA_8021Q_SWITCH_ID_MASK) >> DSA_8021Q_SWITCH_ID_SHIFT; } EXPORT_SYMBOL_GPL(dsa_8021q_rx_switch_id); /* Returns the decoded port ID from the RX VID. */ int dsa_8021q_rx_source_port(u16 vid) { - return ((vid - DSA_8021Q_RX_VID_BASE) % DSA_MAX_PORTS); + return (vid & DSA_8021Q_PORT_MASK) >> DSA_8021Q_PORT_SHIFT; } EXPORT_SYMBOL_GPL(dsa_8021q_rx_source_port); @@ -128,10 +168,7 @@ int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int port, bool enabled) u16 flags; if (i == upstream) - /* CPU port needs to see this port's RX VID - * as tagged egress. - */ - flags = 0; + continue; else if (i == port) /* The RX VID is pvid on this port */ flags = BRIDGE_VLAN_INFO_UNTAGGED | @@ -150,6 +187,20 @@ int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int port, bool enabled) return err; } } + + /* CPU port needs to see this port's RX VID + * as tagged egress. + */ + if (enabled) + err = dsa_port_vid_add(upstream_dp, rx_vid, 0); + else + err = dsa_port_vid_del(upstream_dp, rx_vid); + if (err) { + dev_err(ds->dev, "Failed to apply RX VID %d to port %d: %d\n", + rx_vid, port, err); + return err; + } + /* Finally apply the TX VID on this port and on the CPU port */ if (enabled) err = dsa_port_vid_add(dp, tx_vid, BRIDGE_VLAN_INFO_UNTAGGED); |