summaryrefslogtreecommitdiffstats
path: root/net/dsa/slave.c
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@arm.linux.org.uk>2015-10-03 18:09:07 +0100
committerDavid S. Miller <davem@davemloft.net>2015-10-07 02:58:49 -0700
commitd25b8e74291fec2dbf3fe3df7f20289eeaa9d28f (patch)
treec20a5e5778954ba7cbe12ae2dc24c5fea3f10806 /net/dsa/slave.c
parent4bac50bace0377138fed2ac3627c1ad470ea1eca (diff)
downloadlinux-d25b8e74291fec2dbf3fe3df7f20289eeaa9d28f.tar.bz2
net: dsa: better error reporting
Add additional error reporting to the generic DSA code, so it's easier to debug when things go wrong. This was useful when initially bringing up 88e6176 on a new board. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/dsa/slave.c')
-rw-r--r--net/dsa/slave.c24
1 files changed, 16 insertions, 8 deletions
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 5f65f929902e..4f607bc2a845 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1026,8 +1026,10 @@ static int dsa_slave_phy_connect(struct dsa_slave_priv *p,
struct dsa_switch *ds = p->parent;
p->phy = ds->slave_mii_bus->phy_map[addr];
- if (!p->phy)
+ if (!p->phy) {
+ netdev_err(slave_dev, "no phy at %d\n", addr);
return -ENODEV;
+ }
/* Use already configured phy mode */
if (p->phy_interface == PHY_INTERFACE_MODE_NA)
@@ -1061,7 +1063,7 @@ static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
*/
ret = of_phy_register_fixed_link(port_dn);
if (ret) {
- netdev_err(slave_dev, "failed to register fixed PHY\n");
+ netdev_err(slave_dev, "failed to register fixed PHY: %d\n", ret);
return ret;
}
phy_is_fixed = true;
@@ -1072,17 +1074,20 @@ static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
phy_flags = ds->drv->get_phy_flags(ds, p->port);
if (phy_dn) {
- ret = of_mdio_parse_addr(&slave_dev->dev, phy_dn);
+ int phy_id = of_mdio_parse_addr(&slave_dev->dev, phy_dn);
+
/* If this PHY address is part of phys_mii_mask, which means
* that we need to divert reads and writes to/from it, then we
* want to bind this device using the slave MII bus created by
* DSA to make that happen.
*/
- if (!phy_is_fixed && ret >= 0 &&
- (ds->phys_mii_mask & (1 << ret))) {
- ret = dsa_slave_phy_connect(p, slave_dev, ret);
- if (ret)
+ if (!phy_is_fixed && phy_id >= 0 &&
+ (ds->phys_mii_mask & (1 << phy_id))) {
+ ret = dsa_slave_phy_connect(p, slave_dev, phy_id);
+ if (ret) {
+ netdev_err(slave_dev, "failed to connect to phy%d: %d\n", phy_id, ret);
return ret;
+ }
} else {
p->phy = of_phy_connect(slave_dev, phy_dn,
dsa_slave_adjust_link,
@@ -1099,8 +1104,10 @@ static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
*/
if (!p->phy) {
ret = dsa_slave_phy_connect(p, slave_dev, p->port);
- if (ret)
+ if (ret) {
+ netdev_err(slave_dev, "failed to connect to port %d: %d\n", p->port, ret);
return ret;
+ }
} else {
netdev_info(slave_dev, "attached PHY at address %d [%s]\n",
p->phy->addr, p->phy->drv->name);
@@ -1212,6 +1219,7 @@ int dsa_slave_create(struct dsa_switch *ds, struct device *parent,
ret = dsa_slave_phy_setup(p, slave_dev);
if (ret) {
+ netdev_err(master, "error %d setting up slave phy\n", ret);
free_netdev(slave_dev);
return ret;
}