Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [SUNGEM]: Fix MAC address setting when interface is up.
  [IPV4] fib_trie: Document locking.
  [NET]: Correct accept(2) recovery after sock_attach_fd()
  [PPP]: Don't leak an sk_buff on interface destruction.
  [NET_SCHED]: Fix ingress locking
  [NET_SCHED]: cls_basic: fix NULL pointer dereference
  [DCCP]: make dccp_write_xmit_timer() static again
  [TG3]: Update version and reldate.
  [TG3]: Exit irq handler during chip reset.
  [TG3]: Eliminate the unused TG3_FLAG_SPLIT_MODE flag.
  [IPV6]: Fix routing round-robin locking.
  [DECNet] fib: Fix out of bound access of dn_fib_props[]
  [IPv4] fib: Fix out of bound access of fib_props[]
  [NET] AX.25 Kconfig and docs updates and fixes
  [NET]: Fix neighbour destructor handling.
  [NET]: Fix fib_rules compatibility breakage
  [SCTP]: Update SCTP Maintainers entry
  [NET]: remove unused header file: drivers/net/wan/lmc/lmc_media.h

1 files changed, 36 insertions, 25 deletions

diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
index a8993a041724..43dd86fca4d3 100644
--- a/net/ax25/Kconfig
+++ b/net/ax25/Kconfig
@@ -1,30 +1,27 @@
 #
 # Amateur Radio protocols and AX.25 device configuration
 #
-# 19971130	Now in an own category to make correct compilation of the
-#		AX.25 stuff easier...
-#		Joerg Reuter DL1BKE <jreuter@yaina.de>
-# 19980129	Moved to net/ax25/Config.in, sourcing device drivers.
 
 menuconfig HAMRADIO
 	depends on NET
 	bool "Amateur Radio support"
 	help
 	  If you want to connect your Linux box to an amateur radio, answer Y
-	  here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> and
-	  the AX25-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
+	  here. You want to read <http://www.tapr.org/tapr/html/pkthome.html>
+	  and more specifically about AX.25 on Linux
+	  <http://www.linux-ax25.org/>.
 
 	  Note that the answer to this question won't directly affect the
 	  kernel: saying N will just cause the configurator to skip all
 	  the questions about amateur radio.
 
 comment "Packet Radio protocols"
-	depends on HAMRADIO && NET
+	depends on HAMRADIO
 
 config AX25
 	tristate "Amateur Radio AX.25 Level 2 protocol"
-	depends on HAMRADIO && NET
-	---help---
+	depends on HAMRADIO
+	help
 	  This is the protocol used for computer communication over amateur
 	  radio. It is either used by itself for point-to-point links, or to
 	  carry other protocols such as tcp/ip. To use it, you need a device
@@ -52,6 +49,7 @@ config AX25
 
 config AX25_DAMA_SLAVE
 	bool "AX.25 DAMA Slave support"
+	default y
 	depends on AX25
 	help
 	  DAMA is a mechanism to prevent collisions when doing AX.25
@@ -59,23 +57,38 @@ config AX25_DAMA_SLAVE
 	  from clients (called "slaves") and redistributes it to other slaves.
 	  If you say Y here, your Linux box will act as a DAMA slave; this is
 	  transparent in that you don't have to do any special DAMA
-	  configuration. (Linux cannot yet act as a DAMA server.) If unsure,
-	  say N.
+	  configuration. Linux cannot yet act as a DAMA server.  This option
+	  only compiles DAMA slave support into the kernel.  It still needs to
+	  be enabled at runtime.  For more about DAMA see
+	  <http://www.linux-ax25.org>.  If unsure, say Y.
+
+# placeholder until implemented
+config AX25_DAMA_MASTER
+	bool 'AX.25 DAMA Master support'
+	depends on AX25_DAMA_SLAVE && BROKEN
+	help
+	  DAMA is a mechanism to prevent collisions when doing AX.25
+	  networking. A DAMA server (called "master") accepts incoming traffic
+	  from clients (called "slaves") and redistributes it to other slaves.
+	  If you say Y here, your Linux box will act as a DAMA master; this is
+	  transparent in that you don't have to do any special DAMA
+	  configuration. Linux cannot yet act as a DAMA server.  This option
+	  only compiles DAMA slave support into the kernel.  It still needs to
+	  be explicitly enabled, so if unsure, say Y.
 
-#	 bool '    AX.25 DAMA Master support' CONFIG_AX25_DAMA_MASTER
 config NETROM
 	tristate "Amateur Radio NET/ROM protocol"
 	depends on AX25
-	---help---
+	help
 	  NET/ROM is a network layer protocol on top of AX.25 useful for
 	  routing.
 
 	  A comprehensive listing of all the software for Linux amateur radio
 	  users as well as information about how to configure an AX.25 port is
-	  contained in the AX25-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. You also might want to
-	  check out the file <file:Documentation/networking/ax25.txt>. More
-	  information about digital amateur radio in general is on the WWW at
+	  contained in the Linux Ham Wiki, available from
+	  <http://www.linux-ax25.org>. You also might want to check out the
+	  file <file:Documentation/networking/ax25.txt>. More information about
+	  digital amateur radio in general is on the WWW at
 	  <http://www.tapr.org/tapr/html/pkthome.html>.
 
 	  To compile this driver as a module, choose M here: the
@@ -84,27 +97,25 @@ config NETROM
 config ROSE
 	tristate "Amateur Radio X.25 PLP (Rose)"
 	depends on AX25
-	---help---
+	help
 	  The Packet Layer Protocol (PLP) is a way to route packets over X.25
 	  connections in general and amateur radio AX.25 connections in
 	  particular, essentially an alternative to NET/ROM.
 
 	  A comprehensive listing of all the software for Linux amateur radio
 	  users as well as information about how to configure an AX.25 port is
-	  contained in the AX25-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  You also might want to
-	  check out the file <file:Documentation/networking/ax25.txt>. More
-	  information about digital amateur radio in general is on the WWW at
+	  contained in the Linux Ham Wiki, available from
+	  <http://www.linux-ax25.org>.  You also might want to check out the
+	  file <file:Documentation/networking/ax25.txt>. More information about
+	  digital amateur radio in general is on the WWW at
 	  <http://www.tapr.org/tapr/html/pkthome.html>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called rose.
 
-
 menu "AX.25 network device drivers"
-	depends on HAMRADIO && NET && AX25!=n
+	depends on HAMRADIO && AX25
 
 source "drivers/net/hamradio/Kconfig"
 
 endmenu
-