summaryrefslogtreecommitdiffstats
path: root/lib
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-12-15 13:22:29 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2020-12-15 13:22:29 -0800
commitd635a69dd4981cc51f90293f5f64268620ed1565 (patch)
tree5e0a758b402ea7d624c25c3a343545dd29e80f31 /lib
parentac73e3dc8acd0a3be292755db30388c3580f5674 (diff)
parentefd5a1584537698220578227e6467638307c2a0b (diff)
downloadlinux-d635a69dd4981cc51f90293f5f64268620ed1565.tar.bz2
Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ...
Diffstat (limited to 'lib')
-rw-r--r--lib/Kconfig.debug9
-rw-r--r--lib/nlattr.c42
2 files changed, 36 insertions, 15 deletions
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index e952f892f047..8be18d0eb0bd 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -274,6 +274,15 @@ config DEBUG_INFO_BTF
Turning this on expects presence of pahole tool, which will convert
DWARF type info into equivalent deduplicated BTF type info.
+config PAHOLE_HAS_SPLIT_BTF
+ def_bool $(success, test `$(PAHOLE) --version | sed -E 's/v([0-9]+)\.([0-9]+)/\1\2/'` -ge "119")
+
+config DEBUG_INFO_BTF_MODULES
+ def_bool y
+ depends on DEBUG_INFO_BTF && MODULES && PAHOLE_HAS_SPLIT_BTF
+ help
+ Generate compact split BTF type information for kernel modules.
+
config GDB_SCRIPTS
bool "Provide GDB scripts for kernel debugging"
help
diff --git a/lib/nlattr.c b/lib/nlattr.c
index 74019c8ebf6b..09aa181569e0 100644
--- a/lib/nlattr.c
+++ b/lib/nlattr.c
@@ -709,35 +709,47 @@ struct nlattr *nla_find(const struct nlattr *head, int len, int attrtype)
EXPORT_SYMBOL(nla_find);
/**
- * nla_strlcpy - Copy string attribute payload into a sized buffer
- * @dst: where to copy the string to
- * @nla: attribute to copy the string from
- * @dstsize: size of destination buffer
+ * nla_strscpy - Copy string attribute payload into a sized buffer
+ * @dst: Where to copy the string to.
+ * @nla: Attribute to copy the string from.
+ * @dstsize: Size of destination buffer.
*
* Copies at most dstsize - 1 bytes into the destination buffer.
- * The result is always a valid NUL-terminated string. Unlike
- * strlcpy the destination buffer is always padded out.
+ * Unlike strlcpy the destination buffer is always padded out.
*
- * Returns the length of the source buffer.
+ * Return:
+ * * srclen - Returns @nla length (not including the trailing %NUL).
+ * * -E2BIG - If @dstsize is 0 or greater than U16_MAX or @nla length greater
+ * than @dstsize.
*/
-size_t nla_strlcpy(char *dst, const struct nlattr *nla, size_t dstsize)
+ssize_t nla_strscpy(char *dst, const struct nlattr *nla, size_t dstsize)
{
size_t srclen = nla_len(nla);
char *src = nla_data(nla);
+ ssize_t ret;
+ size_t len;
+
+ if (dstsize == 0 || WARN_ON_ONCE(dstsize > U16_MAX))
+ return -E2BIG;
if (srclen > 0 && src[srclen - 1] == '\0')
srclen--;
- if (dstsize > 0) {
- size_t len = (srclen >= dstsize) ? dstsize - 1 : srclen;
-
- memset(dst, 0, dstsize);
- memcpy(dst, src, len);
+ if (srclen >= dstsize) {
+ len = dstsize - 1;
+ ret = -E2BIG;
+ } else {
+ len = srclen;
+ ret = len;
}
- return srclen;
+ memcpy(dst, src, len);
+ /* Zero pad end of dst. */
+ memset(dst + len, 0, dstsize - len);
+
+ return ret;
}
-EXPORT_SYMBOL(nla_strlcpy);
+EXPORT_SYMBOL(nla_strscpy);
/**
* nla_strdup - Copy string attribute payload into a newly allocated buffer