tracing: Add NMI tracing in hwlat detector

As NMIs can also cause latency when interrupts are disabled, the hwlat
detectory has no way to know if the latency it detects is from an NMI or an
SMI or some other hardware glitch.

As ftrace_nmi_enter/exit() funtions are no longer used (except for sh, which
isn't supported anymore), I converted those to "arch_ftrace_nmi_enter/exit"
and use ftrace_nmi_enter/exit() to check if hwlat detector is tracing or
not, and if so, it calls into the hwlat utility.

Since the hwlat detector only has a single kthread that is spinning with
interrupts disabled, it marks what CPU it is on, and if the NMI callback
happens on that CPU, it records the time spent in that NMI. This is added to
the output that is generated by the hwlat detector as:

 #3     inner/outer(us):    9/9     ts:1470836488.206734548
 #4     inner/outer(us):    0/8     ts:1470836497.140808588
 #5     inner/outer(us):    0/6     ts:1470836499.140825168 nmi-total:5 nmi-count:1
 #6     inner/outer(us):    9/9     ts:1470836501.140841748

All time is still tracked in microseconds.

The NMI information is only shown when an NMI occurred during the sample.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 51 insertions, 0 deletions

diff --git a/kernel/trace/trace_hwlat.c b/kernel/trace/trace_hwlat.c
index 65aab3914a56..b97286c48735 100644
--- a/kernel/trace/trace_hwlat.c
+++ b/kernel/trace/trace_hwlat.c
@@ -64,6 +64,15 @@ static struct dentry *hwlat_sample_window;	/* sample window us */
 /* Save the previous tracing_thresh value */
 static unsigned long save_tracing_thresh;
 
+/* NMI timestamp counters */
+static u64 nmi_ts_start;
+static u64 nmi_total_ts;
+static int nmi_count;
+static int nmi_cpu;
+
+/* Tells NMIs to call back to the hwlat tracer to record timestamps */
+bool trace_hwlat_callback_enabled;
+
 /* If the user changed threshold, remember it */
 static u64 last_tracing_thresh = DEFAULT_LAT_THRESHOLD * NSEC_PER_USEC;
 
@@ -72,7 +81,9 @@ struct hwlat_sample {
 	u64		seqnum;		/* unique sequence */
 	u64		duration;	/* delta */
 	u64		outer_duration;	/* delta (outer loop) */
+	u64		nmi_total_ts;	/* Total time spent in NMIs */
 	struct timespec	timestamp;	/* wall time */
+	int		nmi_count;	/* # NMIs during this sample */
 };
 
 /* keep the global state somewhere. */
@@ -112,6 +123,8 @@ static void trace_hwlat_sample(struct hwlat_sample *sample)
 	entry->duration			= sample->duration;
 	entry->outer_duration		= sample->outer_duration;
 	entry->timestamp		= sample->timestamp;
+	entry->nmi_total_ts		= sample->nmi_total_ts;
+	entry->nmi_count		= sample->nmi_count;
 
 	if (!call_filter_check_discard(call, entry, buffer, event))
 		__buffer_unlock_commit(buffer, event);
@@ -125,6 +138,26 @@ static void trace_hwlat_sample(struct hwlat_sample *sample)
 #define init_time(a, b)	(a = b)
 #define time_u64(a)	a
 
+void trace_hwlat_callback(bool enter)
+{
+	if (smp_processor_id() != nmi_cpu)
+		return;
+
+	/*
+	 * Currently trace_clock_local() calls sched_clock() and the
+	 * generic version is not NMI safe.
+	 */
+	if (!IS_ENABLED(CONFIG_GENERIC_SCHED_CLOCK)) {
+		if (enter)
+			nmi_ts_start = time_get();
+		else
+			nmi_total_ts = time_get() - nmi_ts_start;
+	}
+
+	if (enter)
+		nmi_count++;
+}
+
 /**
  * get_sample - sample the CPU TSC and look for likely hardware latencies
  *
@@ -144,6 +177,14 @@ static int get_sample(void)
 
 	do_div(thresh, NSEC_PER_USEC); /* modifies interval value */
 
+	nmi_cpu = smp_processor_id();
+	nmi_total_ts = 0;
+	nmi_count = 0;
+	/* Make sure NMIs see this first */
+	barrier();
+
+	trace_hwlat_callback_enabled = true;
+
 	init_time(last_t2, 0);
 	start = time_get(); /* start timestamp */
 
@@ -188,6 +229,10 @@ static int get_sample(void)
 
 	} while (total <= hwlat_data.sample_width);
 
+	barrier(); /* finish the above in the view for NMIs */
+	trace_hwlat_callback_enabled = false;
+	barrier(); /* Make sure nmi_total_ts is no longer updated */
+
 	ret = 0;
 
 	/* If we exceed the threshold value, we have found a hardware latency */
@@ -196,11 +241,17 @@ static int get_sample(void)
 
 		ret = 1;
 
+		/* We read in microseconds */
+		if (nmi_total_ts)
+			do_div(nmi_total_ts, NSEC_PER_USEC);
+
 		hwlat_data.count++;
 		s.seqnum = hwlat_data.count;
 		s.duration = sample;
 		s.outer_duration = outer_sample;
 		s.timestamp = CURRENT_TIME;
+		s.nmi_total_ts = nmi_total_ts;
+		s.nmi_count = nmi_count;
 		trace_hwlat_sample(&s);
 
 		/* Keep a running maximum ever recorded hardware latency */