Merge branch 'fortglx/4.15/time' of https://git.linaro.org/people/john.stultz/linux into timers/core

Pull timekeeping updates from John Stultz:

 - More y2038 work from Arnd Bergmann

 - A new mechanism to allow RTC drivers to specify the resolution of the
   RTC so the suspend/resume code can make informed decisions whether to
   inject the suspended time or not in case of fast suspend/resume cycles.

1 files changed, 109 insertions, 12 deletions

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 8af77006e937..353f7bd1eeb0 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1306,33 +1306,31 @@ EXPORT_SYMBOL(do_settimeofday64);
  *
  * Adds or subtracts an offset value from the current time.
  */
-int timekeeping_inject_offset(struct timespec *ts)
+static int timekeeping_inject_offset(struct timespec64 *ts)
 {
 	struct timekeeper *tk = &tk_core.timekeeper;
 	unsigned long flags;
-	struct timespec64 ts64, tmp;
+	struct timespec64 tmp;
 	int ret = 0;
 
-	if (!timespec_inject_offset_valid(ts))
+	if (ts->tv_nsec < 0 || ts->tv_nsec >= NSEC_PER_SEC)
 		return -EINVAL;
 
-	ts64 = timespec_to_timespec64(*ts);
-
 	raw_spin_lock_irqsave(&timekeeper_lock, flags);
 	write_seqcount_begin(&tk_core.seq);
 
 	timekeeping_forward_now(tk);
 
 	/* Make sure the proposed value is valid */
-	tmp = timespec64_add(tk_xtime(tk),  ts64);
-	if (timespec64_compare(&tk->wall_to_monotonic, &ts64) > 0 ||
+	tmp = timespec64_add(tk_xtime(tk), *ts);
+	if (timespec64_compare(&tk->wall_to_monotonic, ts) > 0 ||
 	    !timespec64_valid_strict(&tmp)) {
 		ret = -EINVAL;
 		goto error;
 	}
 
-	tk_xtime_add(tk, &ts64);
-	tk_set_wall_to_mono(tk, timespec64_sub(tk->wall_to_monotonic, ts64));
+	tk_xtime_add(tk, ts);
+	tk_set_wall_to_mono(tk, timespec64_sub(tk->wall_to_monotonic, *ts));
 
 error: /* even if we error out, we forwarded the time, so call update */
 	timekeeping_update(tk, TK_CLEAR_NTP | TK_MIRROR | TK_CLOCK_WAS_SET);
@@ -1345,7 +1343,40 @@ error: /* even if we error out, we forwarded the time, so call update */
 
 	return ret;
 }
-EXPORT_SYMBOL(timekeeping_inject_offset);
+
+/*
+ * Indicates if there is an offset between the system clock and the hardware
+ * clock/persistent clock/rtc.
+ */
+int persistent_clock_is_local;
+
+/*
+ * Adjust the time obtained from the CMOS to be UTC time instead of
+ * local time.
+ *
+ * This is ugly, but preferable to the alternatives.  Otherwise we
+ * would either need to write a program to do it in /etc/rc (and risk
+ * confusion if the program gets run more than once; it would also be
+ * hard to make the program warp the clock precisely n hours)  or
+ * compile in the timezone information into the kernel.  Bad, bad....
+ *
+ *						- TYT, 1992-01-01
+ *
+ * The best thing to do is to keep the CMOS clock in universal time (UTC)
+ * as real UNIX machines always do it. This avoids all headaches about
+ * daylight saving times and warping kernel clocks.
+ */
+void timekeeping_warp_clock(void)
+{
+	if (sys_tz.tz_minuteswest != 0) {
+		struct timespec64 adjust;
+
+		persistent_clock_is_local = 1;
+		adjust.tv_sec = sys_tz.tz_minuteswest * 60;
+		adjust.tv_nsec = 0;
+		timekeeping_inject_offset(&adjust);
+	}
+}
 
 /**
  * __timekeeping_set_tai_offset - Sets the TAI offset from UTC and monotonic
@@ -2290,6 +2321,72 @@ ktime_t ktime_get_update_offsets_now(unsigned int *cwsseq, ktime_t *offs_real,
 }
 
 /**
+ * timekeeping_validate_timex - Ensures the timex is ok for use in do_adjtimex
+ */
+static int timekeeping_validate_timex(struct timex *txc)
+{
+	if (txc->modes & ADJ_ADJTIME) {
+		/* singleshot must not be used with any other mode bits */
+		if (!(txc->modes & ADJ_OFFSET_SINGLESHOT))
+			return -EINVAL;
+		if (!(txc->modes & ADJ_OFFSET_READONLY) &&
+		    !capable(CAP_SYS_TIME))
+			return -EPERM;
+	} else {
+		/* In order to modify anything, you gotta be super-user! */
+		if (txc->modes && !capable(CAP_SYS_TIME))
+			return -EPERM;
+		/*
+		 * if the quartz is off by more than 10% then
+		 * something is VERY wrong!
+		 */
+		if (txc->modes & ADJ_TICK &&
+		    (txc->tick <  900000/USER_HZ ||
+		     txc->tick > 1100000/USER_HZ))
+			return -EINVAL;
+	}
+
+	if (txc->modes & ADJ_SETOFFSET) {
+		/* In order to inject time, you gotta be super-user! */
+		if (!capable(CAP_SYS_TIME))
+			return -EPERM;
+
+		/*
+		 * Validate if a timespec/timeval used to inject a time
+		 * offset is valid.  Offsets can be postive or negative, so
+		 * we don't check tv_sec. The value of the timeval/timespec
+		 * is the sum of its fields,but *NOTE*:
+		 * The field tv_usec/tv_nsec must always be non-negative and
+		 * we can't have more nanoseconds/microseconds than a second.
+		 */
+		if (txc->time.tv_usec < 0)
+			return -EINVAL;
+
+		if (txc->modes & ADJ_NANO) {
+			if (txc->time.tv_usec >= NSEC_PER_SEC)
+				return -EINVAL;
+		} else {
+			if (txc->time.tv_usec >= USEC_PER_SEC)
+				return -EINVAL;
+		}
+	}
+
+	/*
+	 * Check for potential multiplication overflows that can
+	 * only happen on 64-bit systems:
+	 */
+	if ((txc->modes & ADJ_FREQUENCY) && (BITS_PER_LONG == 64)) {
+		if (LLONG_MIN / PPM_SCALE > txc->freq)
+			return -EINVAL;
+		if (LLONG_MAX / PPM_SCALE < txc->freq)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+/**
  * do_adjtimex() - Accessor function to NTP __do_adjtimex function
  */
 int do_adjtimex(struct timex *txc)
@@ -2301,12 +2398,12 @@ int do_adjtimex(struct timex *txc)
 	int ret;
 
 	/* Validate the data before disabling interrupts */
-	ret = ntp_validate_timex(txc);
+	ret = timekeeping_validate_timex(txc);
 	if (ret)
 		return ret;
 
 	if (txc->modes & ADJ_SETOFFSET) {
-		struct timespec delta;
+		struct timespec64 delta;
 		delta.tv_sec  = txc->time.tv_sec;
 		delta.tv_nsec = txc->time.tv_usec;
 		if (!(txc->modes & ADJ_NANO))