kcsan: Add Kernel Concurrency Sanitizer infrastructure

Kernel Concurrency Sanitizer (KCSAN) is a dynamic data-race detector for
kernel space. KCSAN is a sampling watchpoint-based data-race detector.
See the included Documentation/dev-tools/kcsan.rst for more details.

This patch adds basic infrastructure, but does not yet enable KCSAN for
any architecture.

Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

1 files changed, 626 insertions, 0 deletions

diff --git a/kernel/kcsan/core.c b/kernel/kcsan/core.c
new file mode 100644
index 000000000000..d9410d58c93e
--- /dev/null
+++ b/kernel/kcsan/core.c
@@ -0,0 +1,626 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/atomic.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/preempt.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+
+#include "atomic.h"
+#include "encoding.h"
+#include "kcsan.h"
+
+bool kcsan_enabled;
+
+/* Per-CPU kcsan_ctx for interrupts */
+static DEFINE_PER_CPU(struct kcsan_ctx, kcsan_cpu_ctx) = {
+	.disable_count = 0,
+	.atomic_next = 0,
+	.atomic_nest_count = 0,
+	.in_flat_atomic = false,
+};
+
+/*
+ * Helper macros to index into adjacent slots slots, starting from address slot
+ * itself, followed by the right and left slots.
+ *
+ * The purpose is 2-fold:
+ *
+ *	1. if during insertion the address slot is already occupied, check if
+ *	   any adjacent slots are free;
+ *	2. accesses that straddle a slot boundary due to size that exceeds a
+ *	   slot's range may check adjacent slots if any watchpoint matches.
+ *
+ * Note that accesses with very large size may still miss a watchpoint; however,
+ * given this should be rare, this is a reasonable trade-off to make, since this
+ * will avoid:
+ *
+ *	1. excessive contention between watchpoint checks and setup;
+ *	2. larger number of simultaneous watchpoints without sacrificing
+ *	   performance.
+ *
+ * Example: SLOT_IDX values for KCSAN_CHECK_ADJACENT=1, where i is [0, 1, 2]:
+ *
+ *   slot=0:  [ 1,  2,  0]
+ *   slot=9:  [10, 11,  9]
+ *   slot=63: [64, 65, 63]
+ */
+#define NUM_SLOTS (1 + 2 * KCSAN_CHECK_ADJACENT)
+#define SLOT_IDX(slot, i) (slot + ((i + KCSAN_CHECK_ADJACENT) % NUM_SLOTS))
+
+/*
+ * SLOT_IDX_FAST is used in fast-path. Not first checking the address's primary
+ * slot (middle) is fine if we assume that data races occur rarely. The set of
+ * indices {SLOT_IDX(slot, i) | i in [0, NUM_SLOTS)} is equivalent to
+ * {SLOT_IDX_FAST(slot, i) | i in [0, NUM_SLOTS)}.
+ */
+#define SLOT_IDX_FAST(slot, i) (slot + i)
+
+/*
+ * Watchpoints, with each entry encoded as defined in encoding.h: in order to be
+ * able to safely update and access a watchpoint without introducing locking
+ * overhead, we encode each watchpoint as a single atomic long. The initial
+ * zero-initialized state matches INVALID_WATCHPOINT.
+ *
+ * Add NUM_SLOTS-1 entries to account for overflow; this helps avoid having to
+ * use more complicated SLOT_IDX_FAST calculation with modulo in fast-path.
+ */
+static atomic_long_t watchpoints[CONFIG_KCSAN_NUM_WATCHPOINTS + NUM_SLOTS - 1];
+
+/*
+ * Instructions to skip watching counter, used in should_watch(). We use a
+ * per-CPU counter to avoid excessive contention.
+ */
+static DEFINE_PER_CPU(long, kcsan_skip);
+
+static inline atomic_long_t *find_watchpoint(unsigned long addr, size_t size,
+					     bool expect_write,
+					     long *encoded_watchpoint)
+{
+	const int slot = watchpoint_slot(addr);
+	const unsigned long addr_masked = addr & WATCHPOINT_ADDR_MASK;
+	atomic_long_t *watchpoint;
+	unsigned long wp_addr_masked;
+	size_t wp_size;
+	bool is_write;
+	int i;
+
+	BUILD_BUG_ON(CONFIG_KCSAN_NUM_WATCHPOINTS < NUM_SLOTS);
+
+	for (i = 0; i < NUM_SLOTS; ++i) {
+		watchpoint = &watchpoints[SLOT_IDX_FAST(slot, i)];
+		*encoded_watchpoint = atomic_long_read(watchpoint);
+		if (!decode_watchpoint(*encoded_watchpoint, &wp_addr_masked,
+				       &wp_size, &is_write))
+			continue;
+
+		if (expect_write && !is_write)
+			continue;
+
+		/* Check if the watchpoint matches the access. */
+		if (matching_access(wp_addr_masked, wp_size, addr_masked, size))
+			return watchpoint;
+	}
+
+	return NULL;
+}
+
+static inline atomic_long_t *insert_watchpoint(unsigned long addr, size_t size,
+					       bool is_write)
+{
+	const int slot = watchpoint_slot(addr);
+	const long encoded_watchpoint = encode_watchpoint(addr, size, is_write);
+	atomic_long_t *watchpoint;
+	int i;
+
+	/* Check slot index logic, ensuring we stay within array bounds. */
+	BUILD_BUG_ON(SLOT_IDX(0, 0) != KCSAN_CHECK_ADJACENT);
+	BUILD_BUG_ON(SLOT_IDX(0, KCSAN_CHECK_ADJACENT + 1) != 0);
+	BUILD_BUG_ON(SLOT_IDX(CONFIG_KCSAN_NUM_WATCHPOINTS - 1,
+			      KCSAN_CHECK_ADJACENT) !=
+		     ARRAY_SIZE(watchpoints) - 1);
+	BUILD_BUG_ON(SLOT_IDX(CONFIG_KCSAN_NUM_WATCHPOINTS - 1,
+			      KCSAN_CHECK_ADJACENT + 1) !=
+		     ARRAY_SIZE(watchpoints) - NUM_SLOTS);
+
+	for (i = 0; i < NUM_SLOTS; ++i) {
+		long expect_val = INVALID_WATCHPOINT;
+
+		/* Try to acquire this slot. */
+		watchpoint = &watchpoints[SLOT_IDX(slot, i)];
+		if (atomic_long_try_cmpxchg_relaxed(watchpoint, &expect_val,
+						    encoded_watchpoint))
+			return watchpoint;
+	}
+
+	return NULL;
+}
+
+/*
+ * Return true if watchpoint was successfully consumed, false otherwise.
+ *
+ * This may return false if:
+ *
+ *	1. another thread already consumed the watchpoint;
+ *	2. the thread that set up the watchpoint already removed it;
+ *	3. the watchpoint was removed and then re-used.
+ */
+static inline bool try_consume_watchpoint(atomic_long_t *watchpoint,
+					  long encoded_watchpoint)
+{
+	return atomic_long_try_cmpxchg_relaxed(watchpoint, &encoded_watchpoint,
+					       CONSUMED_WATCHPOINT);
+}
+
+/*
+ * Return true if watchpoint was not touched, false if consumed.
+ */
+static inline bool remove_watchpoint(atomic_long_t *watchpoint)
+{
+	return atomic_long_xchg_relaxed(watchpoint, INVALID_WATCHPOINT) !=
+	       CONSUMED_WATCHPOINT;
+}
+
+static inline struct kcsan_ctx *get_ctx(void)
+{
+	/*
+	 * In interrupt, use raw_cpu_ptr to avoid unnecessary checks, that would
+	 * also result in calls that generate warnings in uaccess regions.
+	 */
+	return in_task() ? &current->kcsan_ctx : raw_cpu_ptr(&kcsan_cpu_ctx);
+}
+
+static inline bool is_atomic(const volatile void *ptr)
+{
+	struct kcsan_ctx *ctx = get_ctx();
+
+	if (unlikely(ctx->atomic_next > 0)) {
+		/*
+		 * Because we do not have separate contexts for nested
+		 * interrupts, in case atomic_next is set, we simply assume that
+		 * the outer interrupt set atomic_next. In the worst case, we
+		 * will conservatively consider operations as atomic. This is a
+		 * reasonable trade-off to make, since this case should be
+		 * extremely rare; however, even if extremely rare, it could
+		 * lead to false positives otherwise.
+		 */
+		if ((hardirq_count() >> HARDIRQ_SHIFT) < 2)
+			--ctx->atomic_next; /* in task, or outer interrupt */
+		return true;
+	}
+	if (unlikely(ctx->atomic_nest_count > 0 || ctx->in_flat_atomic))
+		return true;
+
+	return kcsan_is_atomic(ptr);
+}
+
+static inline bool should_watch(const volatile void *ptr, int type)
+{
+	/*
+	 * Never set up watchpoints when memory operations are atomic.
+	 *
+	 * Need to check this first, before kcsan_skip check below: (1) atomics
+	 * should not count towards skipped instructions, and (2) to actually
+	 * decrement kcsan_atomic_next for consecutive instruction stream.
+	 */
+	if ((type & KCSAN_ACCESS_ATOMIC) != 0 || is_atomic(ptr))
+		return false;
+
+	if (this_cpu_dec_return(kcsan_skip) >= 0)
+		return false;
+
+	/*
+	 * NOTE: If we get here, kcsan_skip must always be reset in slow path
+	 * via reset_kcsan_skip() to avoid underflow.
+	 */
+
+	/* this operation should be watched */
+	return true;
+}
+
+static inline void reset_kcsan_skip(void)
+{
+	long skip_count = CONFIG_KCSAN_SKIP_WATCH -
+			  (IS_ENABLED(CONFIG_KCSAN_SKIP_WATCH_RANDOMIZE) ?
+				   prandom_u32_max(CONFIG_KCSAN_SKIP_WATCH) :
+				   0);
+	this_cpu_write(kcsan_skip, skip_count);
+}
+
+static inline bool kcsan_is_enabled(void)
+{
+	return READ_ONCE(kcsan_enabled) && get_ctx()->disable_count == 0;
+}
+
+static inline unsigned int get_delay(void)
+{
+	unsigned int delay = in_task() ? CONFIG_KCSAN_UDELAY_TASK :
+					 CONFIG_KCSAN_UDELAY_INTERRUPT;
+	return delay - (IS_ENABLED(CONFIG_KCSAN_DELAY_RANDOMIZE) ?
+				prandom_u32_max(delay) :
+				0);
+}
+
+/*
+ * Pull everything together: check_access() below contains the performance
+ * critical operations; the fast-path (including check_access) functions should
+ * all be inlinable by the instrumentation functions.
+ *
+ * The slow-path (kcsan_found_watchpoint, kcsan_setup_watchpoint) are
+ * non-inlinable -- note that, we prefix these with "kcsan_" to ensure they can
+ * be filtered from the stacktrace, as well as give them unique names for the
+ * UACCESS whitelist of objtool. Each function uses user_access_save/restore(),
+ * since they do not access any user memory, but instrumentation is still
+ * emitted in UACCESS regions.
+ */
+
+static noinline void kcsan_found_watchpoint(const volatile void *ptr,
+					    size_t size, bool is_write,
+					    atomic_long_t *watchpoint,
+					    long encoded_watchpoint)
+{
+	unsigned long flags;
+	bool consumed;
+
+	if (!kcsan_is_enabled())
+		return;
+	/*
+	 * Consume the watchpoint as soon as possible, to minimize the chances
+	 * of !consumed. Consuming the watchpoint must always be guarded by
+	 * kcsan_is_enabled() check, as otherwise we might erroneously
+	 * triggering reports when disabled.
+	 */
+	consumed = try_consume_watchpoint(watchpoint, encoded_watchpoint);
+
+	/* keep this after try_consume_watchpoint */
+	flags = user_access_save();
+
+	if (consumed) {
+		kcsan_report(ptr, size, is_write, true, raw_smp_processor_id(),
+			     KCSAN_REPORT_CONSUMED_WATCHPOINT);
+	} else {
+		/*
+		 * The other thread may not print any diagnostics, as it has
+		 * already removed the watchpoint, or another thread consumed
+		 * the watchpoint before this thread.
+		 */
+		kcsan_counter_inc(KCSAN_COUNTER_REPORT_RACES);
+	}
+	kcsan_counter_inc(KCSAN_COUNTER_DATA_RACES);
+
+	user_access_restore(flags);
+}
+
+static noinline void kcsan_setup_watchpoint(const volatile void *ptr,
+					    size_t size, bool is_write)
+{
+	atomic_long_t *watchpoint;
+	union {
+		u8 _1;
+		u16 _2;
+		u32 _4;
+		u64 _8;
+	} expect_value;
+	bool value_change = false;
+	unsigned long ua_flags = user_access_save();
+	unsigned long irq_flags;
+
+	/*
+	 * Always reset kcsan_skip counter in slow-path to avoid underflow; see
+	 * should_watch().
+	 */
+	reset_kcsan_skip();
+
+	if (!kcsan_is_enabled())
+		goto out;
+
+	if (!check_encodable((unsigned long)ptr, size)) {
+		kcsan_counter_inc(KCSAN_COUNTER_UNENCODABLE_ACCESSES);
+		goto out;
+	}
+
+	/*
+	 * Disable interrupts & preemptions to avoid another thread on the same
+	 * CPU accessing memory locations for the set up watchpoint; this is to
+	 * avoid reporting races to e.g. CPU-local data.
+	 *
+	 * An alternative would be adding the source CPU to the watchpoint
+	 * encoding, and checking that watchpoint-CPU != this-CPU. There are
+	 * several problems with this:
+	 *   1. we should avoid stealing more bits from the watchpoint encoding
+	 *      as it would affect accuracy, as well as increase performance
+	 *      overhead in the fast-path;
+	 *   2. if we are preempted, but there *is* a genuine data race, we
+	 *      would *not* report it -- since this is the common case (vs.
+	 *      CPU-local data accesses), it makes more sense (from a data race
+	 *      detection point of view) to simply disable preemptions to ensure
+	 *      as many tasks as possible run on other CPUs.
+	 */
+	local_irq_save(irq_flags);
+
+	watchpoint = insert_watchpoint((unsigned long)ptr, size, is_write);
+	if (watchpoint == NULL) {
+		/*
+		 * Out of capacity: the size of `watchpoints`, and the frequency
+		 * with which `should_watch()` returns true should be tweaked so
+		 * that this case happens very rarely.
+		 */
+		kcsan_counter_inc(KCSAN_COUNTER_NO_CAPACITY);
+		goto out_unlock;
+	}
+
+	kcsan_counter_inc(KCSAN_COUNTER_SETUP_WATCHPOINTS);
+	kcsan_counter_inc(KCSAN_COUNTER_USED_WATCHPOINTS);
+
+	/*
+	 * Read the current value, to later check and infer a race if the data
+	 * was modified via a non-instrumented access, e.g. from a device.
+	 */
+	switch (size) {
+	case 1:
+		expect_value._1 = READ_ONCE(*(const u8 *)ptr);
+		break;
+	case 2:
+		expect_value._2 = READ_ONCE(*(const u16 *)ptr);
+		break;
+	case 4:
+		expect_value._4 = READ_ONCE(*(const u32 *)ptr);
+		break;
+	case 8:
+		expect_value._8 = READ_ONCE(*(const u64 *)ptr);
+		break;
+	default:
+		break; /* ignore; we do not diff the values */
+	}
+
+	if (IS_ENABLED(CONFIG_KCSAN_DEBUG)) {
+		kcsan_disable_current();
+		pr_err("KCSAN: watching %s, size: %zu, addr: %px [slot: %d, encoded: %lx]\n",
+		       is_write ? "write" : "read", size, ptr,
+		       watchpoint_slot((unsigned long)ptr),
+		       encode_watchpoint((unsigned long)ptr, size, is_write));
+		kcsan_enable_current();
+	}
+
+	/*
+	 * Delay this thread, to increase probability of observing a racy
+	 * conflicting access.
+	 */
+	udelay(get_delay());
+
+	/*
+	 * Re-read value, and check if it is as expected; if not, we infer a
+	 * racy access.
+	 */
+	switch (size) {
+	case 1:
+		value_change = expect_value._1 != READ_ONCE(*(const u8 *)ptr);
+		break;
+	case 2:
+		value_change = expect_value._2 != READ_ONCE(*(const u16 *)ptr);
+		break;
+	case 4:
+		value_change = expect_value._4 != READ_ONCE(*(const u32 *)ptr);
+		break;
+	case 8:
+		value_change = expect_value._8 != READ_ONCE(*(const u64 *)ptr);
+		break;
+	default:
+		break; /* ignore; we do not diff the values */
+	}
+
+	/* Check if this access raced with another. */
+	if (!remove_watchpoint(watchpoint)) {
+		/*
+		 * No need to increment 'data_races' counter, as the racing
+		 * thread already did.
+		 */
+		kcsan_report(ptr, size, is_write, size > 8 || value_change,
+			     smp_processor_id(), KCSAN_REPORT_RACE_SIGNAL);
+	} else if (value_change) {
+		/* Inferring a race, since the value should not have changed. */
+		kcsan_counter_inc(KCSAN_COUNTER_RACES_UNKNOWN_ORIGIN);
+		if (IS_ENABLED(CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN))
+			kcsan_report(ptr, size, is_write, true,
+				     smp_processor_id(),
+				     KCSAN_REPORT_RACE_UNKNOWN_ORIGIN);
+	}
+
+	kcsan_counter_dec(KCSAN_COUNTER_USED_WATCHPOINTS);
+out_unlock:
+	local_irq_restore(irq_flags);
+out:
+	user_access_restore(ua_flags);
+}
+
+static __always_inline void check_access(const volatile void *ptr, size_t size,
+					 int type)
+{
+	const bool is_write = (type & KCSAN_ACCESS_WRITE) != 0;
+	atomic_long_t *watchpoint;
+	long encoded_watchpoint;
+
+	/*
+	 * Avoid user_access_save in fast-path: find_watchpoint is safe without
+	 * user_access_save, as the address that ptr points to is only used to
+	 * check if a watchpoint exists; ptr is never dereferenced.
+	 */
+	watchpoint = find_watchpoint((unsigned long)ptr, size, !is_write,
+				     &encoded_watchpoint);
+	/*
+	 * It is safe to check kcsan_is_enabled() after find_watchpoint in the
+	 * slow-path, as long as no state changes that cause a data race to be
+	 * detected and reported have occurred until kcsan_is_enabled() is
+	 * checked.
+	 */
+
+	if (unlikely(watchpoint != NULL))
+		kcsan_found_watchpoint(ptr, size, is_write, watchpoint,
+				       encoded_watchpoint);
+	else if (unlikely(should_watch(ptr, type)))
+		kcsan_setup_watchpoint(ptr, size, is_write);
+}
+
+/* === Public interface ===================================================== */
+
+void __init kcsan_init(void)
+{
+	BUG_ON(!in_task());
+
+	kcsan_debugfs_init();
+
+	/*
+	 * We are in the init task, and no other tasks should be running;
+	 * WRITE_ONCE without memory barrier is sufficient.
+	 */
+	if (IS_ENABLED(CONFIG_KCSAN_EARLY_ENABLE))
+		WRITE_ONCE(kcsan_enabled, true);
+}
+
+/* === Exported interface =================================================== */
+
+void kcsan_disable_current(void)
+{
+	++get_ctx()->disable_count;
+}
+EXPORT_SYMBOL(kcsan_disable_current);
+
+void kcsan_enable_current(void)
+{
+	if (get_ctx()->disable_count-- == 0) {
+		/*
+		 * Warn if kcsan_enable_current() calls are unbalanced with
+		 * kcsan_disable_current() calls, which causes disable_count to
+		 * become negative and should not happen.
+		 */
+		kcsan_disable_current(); /* restore to 0, KCSAN still enabled */
+		kcsan_disable_current(); /* disable to generate warning */
+		WARN(1, "Unbalanced %s()", __func__);
+		kcsan_enable_current();
+	}
+}
+EXPORT_SYMBOL(kcsan_enable_current);
+
+void kcsan_nestable_atomic_begin(void)
+{
+	/*
+	 * Do *not* check and warn if we are in a flat atomic region: nestable
+	 * and flat atomic regions are independent from each other.
+	 * See include/linux/kcsan.h: struct kcsan_ctx comments for more
+	 * comments.
+	 */
+
+	++get_ctx()->atomic_nest_count;
+}
+EXPORT_SYMBOL(kcsan_nestable_atomic_begin);
+
+void kcsan_nestable_atomic_end(void)
+{
+	if (get_ctx()->atomic_nest_count-- == 0) {
+		/*
+		 * Warn if kcsan_nestable_atomic_end() calls are unbalanced with
+		 * kcsan_nestable_atomic_begin() calls, which causes
+		 * atomic_nest_count to become negative and should not happen.
+		 */
+		kcsan_nestable_atomic_begin(); /* restore to 0 */
+		kcsan_disable_current(); /* disable to generate warning */
+		WARN(1, "Unbalanced %s()", __func__);
+		kcsan_enable_current();
+	}
+}
+EXPORT_SYMBOL(kcsan_nestable_atomic_end);
+
+void kcsan_flat_atomic_begin(void)
+{
+	get_ctx()->in_flat_atomic = true;
+}
+EXPORT_SYMBOL(kcsan_flat_atomic_begin);
+
+void kcsan_flat_atomic_end(void)
+{
+	get_ctx()->in_flat_atomic = false;
+}
+EXPORT_SYMBOL(kcsan_flat_atomic_end);
+
+void kcsan_atomic_next(int n)
+{
+	get_ctx()->atomic_next = n;
+}
+EXPORT_SYMBOL(kcsan_atomic_next);
+
+void __kcsan_check_access(const volatile void *ptr, size_t size, int type)
+{
+	check_access(ptr, size, type);
+}
+EXPORT_SYMBOL(__kcsan_check_access);
+
+/*
+ * KCSAN uses the same instrumentation that is emitted by supported compilers
+ * for ThreadSanitizer (TSAN).
+ *
+ * When enabled, the compiler emits instrumentation calls (the functions
+ * prefixed with "__tsan" below) for all loads and stores that it generated;
+ * inline asm is not instrumented.
+ *
+ * Note that, not all supported compiler versions distinguish aligned/unaligned
+ * accesses, but e.g. recent versions of Clang do. We simply alias the unaligned
+ * version to the generic version, which can handle both.
+ */
+
+#define DEFINE_TSAN_READ_WRITE(size)                                           \
+	void __tsan_read##size(void *ptr)                                      \
+	{                                                                      \
+		check_access(ptr, size, 0);                                    \
+	}                                                                      \
+	EXPORT_SYMBOL(__tsan_read##size);                                      \
+	void __tsan_unaligned_read##size(void *ptr)                            \
+		__alias(__tsan_read##size);                                    \
+	EXPORT_SYMBOL(__tsan_unaligned_read##size);                            \
+	void __tsan_write##size(void *ptr)                                     \
+	{                                                                      \
+		check_access(ptr, size, KCSAN_ACCESS_WRITE);                   \
+	}                                                                      \
+	EXPORT_SYMBOL(__tsan_write##size);                                     \
+	void __tsan_unaligned_write##size(void *ptr)                           \
+		__alias(__tsan_write##size);                                   \
+	EXPORT_SYMBOL(__tsan_unaligned_write##size)
+
+DEFINE_TSAN_READ_WRITE(1);
+DEFINE_TSAN_READ_WRITE(2);
+DEFINE_TSAN_READ_WRITE(4);
+DEFINE_TSAN_READ_WRITE(8);
+DEFINE_TSAN_READ_WRITE(16);
+
+void __tsan_read_range(void *ptr, size_t size)
+{
+	check_access(ptr, size, 0);
+}
+EXPORT_SYMBOL(__tsan_read_range);
+
+void __tsan_write_range(void *ptr, size_t size)
+{
+	check_access(ptr, size, KCSAN_ACCESS_WRITE);
+}
+EXPORT_SYMBOL(__tsan_write_range);
+
+/*
+ * The below are not required by KCSAN, but can still be emitted by the
+ * compiler.
+ */
+void __tsan_func_entry(void *call_pc)
+{
+}
+EXPORT_SYMBOL(__tsan_func_entry);
+void __tsan_func_exit(void)
+{
+}
+EXPORT_SYMBOL(__tsan_func_exit);
+void __tsan_init(void)
+{
+}
+EXPORT_SYMBOL(__tsan_init);