summaryrefslogtreecommitdiffstats
path: root/init/Kconfig
diff options
context:
space:
mode:
authorRandy Dunlap <rdunlap@infradead.org>2017-11-17 15:31:47 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-17 16:10:05 -0800
commitd1b069f5febc850556cf49e9bb9092d3179c5be5 (patch)
treea96313b886e892a069ab107e003fc6b31f0beea3 /init/Kconfig
parent7016383b44e855209aff47e56f11c59b8aa7b642 (diff)
downloadlinux-d1b069f5febc850556cf49e9bb9092d3179c5be5.tar.bz2
EXPERT Kconfig menu: fix broken EXPERT menu
Clean up the EXPERT menu (yet again). Move FHANDLE and CHECKPOINT_RESTORE into the primary EXPERT menu since they already depend on EXPERT. Move BPF_SYSCALL and USERFAULTFD out of the EXPERT Kconfig symbols menu list since they do not depend on EXPERT and were breaking the continuity of that menu list. Move all of the KALLSYMS Kconfig symbols to the end of the EXPERT menu. This separates the kernel services from the build options. This patch depends on [PATCH] pci: move PCI_QUIRKS to the PCI bus menu (https://lkml.org/lkml/2017/11/2/907). Link: http://lkml.kernel.org/r/72e4465a-a5ff-cb3c-1a90-11aa4861b161@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> [BPF] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'init/Kconfig')
-rw-r--r--init/Kconfig184
1 files changed, 93 insertions, 91 deletions
diff --git a/init/Kconfig b/init/Kconfig
index 7d5a6fbac56a..2934249fba46 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -283,19 +283,6 @@ config CROSS_MEMORY_ATTACH
to directly read from or write to another process' address space.
See the man page for more details.
-config FHANDLE
- bool "open by fhandle syscalls" if EXPERT
- select EXPORTFS
- default y
- help
- If you say Y here, a user level program will be able to map
- file names to handle and then later use the handle for
- different file system operations. This is useful in implementing
- userspace file servers, which now track files using handles instead
- of names. The handle would remain the same even if file names
- get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
- syscalls.
-
config USELIB
bool "uselib syscall"
def_bool ALPHA || M68K || SPARC || X86_32 || IA32_EMULATION
@@ -883,18 +870,6 @@ config SOCK_CGROUP_DATA
endif # CGROUPS
-config CHECKPOINT_RESTORE
- bool "Checkpoint/restore support" if EXPERT
- select PROC_CHILDREN
- default n
- help
- Enables additional kernel features in a sake of checkpoint/restore.
- In particular it adds auxiliary prctl codes to setup process text,
- data and heap segment sizes, and a few additional /proc filesystem
- entries.
-
- If unsure, say N here.
-
menuconfig NAMESPACES
bool "Namespaces support" if EXPERT
depends on MULTIUSER
@@ -1163,6 +1138,19 @@ config SYSCTL_SYSCALL
If unsure say N here.
+config FHANDLE
+ bool "open by fhandle syscalls" if EXPERT
+ select EXPORTFS
+ default y
+ help
+ If you say Y here, a user level program will be able to map
+ file names to handle and then later use the handle for
+ different file system operations. This is useful in implementing
+ userspace file servers, which now track files using handles instead
+ of names. The handle would remain the same even if file names
+ get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
+ syscalls.
+
config POSIX_TIMERS
bool "Posix Clocks & timers" if EXPERT
default y
@@ -1180,54 +1168,6 @@ config POSIX_TIMERS
If unsure say y.
-config KALLSYMS
- bool "Load all symbols for debugging/ksymoops" if EXPERT
- default y
- help
- Say Y here to let the kernel print out symbolic crash information and
- symbolic stack backtraces. This increases the size of the kernel
- somewhat, as all symbols have to be loaded into the kernel image.
-
-config KALLSYMS_ALL
- bool "Include all symbols in kallsyms"
- depends on DEBUG_KERNEL && KALLSYMS
- help
- Normally kallsyms only contains the symbols of functions for nicer
- OOPS messages and backtraces (i.e., symbols from the text and inittext
- sections). This is sufficient for most cases. And only in very rare
- cases (e.g., when a debugger is used) all symbols are required (e.g.,
- names of variables from the data sections, etc).
-
- This option makes sure that all symbols are loaded into the kernel
- image (i.e., symbols from all sections) in cost of increased kernel
- size (depending on the kernel configuration, it may be 300KiB or
- something like this).
-
- Say N unless you really need all symbols.
-
-config KALLSYMS_ABSOLUTE_PERCPU
- bool
- depends on KALLSYMS
- default X86_64 && SMP
-
-config KALLSYMS_BASE_RELATIVE
- bool
- depends on KALLSYMS
- default !IA64 && !(TILE && 64BIT)
- help
- Instead of emitting them as absolute values in the native word size,
- emit the symbol references in the kallsyms table as 32-bit entries,
- each containing a relative value in the range [base, base + U32_MAX]
- or, when KALLSYMS_ABSOLUTE_PERCPU is in effect, each containing either
- an absolute value in the range [0, S32_MAX] or a relative value in the
- range [base, base + S32_MAX], where base is the lowest relative symbol
- address encountered in the image.
-
- On 64-bit builds, this reduces the size of the address table by 50%,
- but more importantly, it results in entries whose values are build
- time constants, and no relocation pass is required at runtime to fix
- up the entries based on the runtime load address of the kernel.
-
config PRINTK
default y
bool "Enable support for printk" if EXPERT
@@ -1339,16 +1279,6 @@ config EVENTFD
If unsure, say Y.
-# syscall, maps, verifier
-config BPF_SYSCALL
- bool "Enable bpf() system call"
- select ANON_INODES
- select BPF
- default n
- help
- Enable the bpf() system call that allows to manipulate eBPF
- programs and maps via file descriptors.
-
config SHMEM
bool "Use full shmem filesystem" if EXPERT
default y
@@ -1378,14 +1308,6 @@ config ADVISE_SYSCALLS
applications use these syscalls, you can disable this option to save
space.
-config USERFAULTFD
- bool "Enable userfaultfd() system call"
- select ANON_INODES
- depends on MMU
- help
- Enable the userfaultfd() system call that allows to intercept and
- handle page faults in userland.
-
config MEMBARRIER
bool "Enable membarrier() system call" if EXPERT
default y
@@ -1398,6 +1320,86 @@ config MEMBARRIER
If unsure, say Y.
+config CHECKPOINT_RESTORE
+ bool "Checkpoint/restore support" if EXPERT
+ select PROC_CHILDREN
+ default n
+ help
+ Enables additional kernel features in a sake of checkpoint/restore.
+ In particular it adds auxiliary prctl codes to setup process text,
+ data and heap segment sizes, and a few additional /proc filesystem
+ entries.
+
+ If unsure, say N here.
+
+config KALLSYMS
+ bool "Load all symbols for debugging/ksymoops" if EXPERT
+ default y
+ help
+ Say Y here to let the kernel print out symbolic crash information and
+ symbolic stack backtraces. This increases the size of the kernel
+ somewhat, as all symbols have to be loaded into the kernel image.
+
+config KALLSYMS_ALL
+ bool "Include all symbols in kallsyms"
+ depends on DEBUG_KERNEL && KALLSYMS
+ help
+ Normally kallsyms only contains the symbols of functions for nicer
+ OOPS messages and backtraces (i.e., symbols from the text and inittext
+ sections). This is sufficient for most cases. And only in very rare
+ cases (e.g., when a debugger is used) all symbols are required (e.g.,
+ names of variables from the data sections, etc).
+
+ This option makes sure that all symbols are loaded into the kernel
+ image (i.e., symbols from all sections) in cost of increased kernel
+ size (depending on the kernel configuration, it may be 300KiB or
+ something like this).
+
+ Say N unless you really need all symbols.
+
+config KALLSYMS_ABSOLUTE_PERCPU
+ bool
+ depends on KALLSYMS
+ default X86_64 && SMP
+
+config KALLSYMS_BASE_RELATIVE
+ bool
+ depends on KALLSYMS
+ default !IA64 && !(TILE && 64BIT)
+ help
+ Instead of emitting them as absolute values in the native word size,
+ emit the symbol references in the kallsyms table as 32-bit entries,
+ each containing a relative value in the range [base, base + U32_MAX]
+ or, when KALLSYMS_ABSOLUTE_PERCPU is in effect, each containing either
+ an absolute value in the range [0, S32_MAX] or a relative value in the
+ range [base, base + S32_MAX], where base is the lowest relative symbol
+ address encountered in the image.
+
+ On 64-bit builds, this reduces the size of the address table by 50%,
+ but more importantly, it results in entries whose values are build
+ time constants, and no relocation pass is required at runtime to fix
+ up the entries based on the runtime load address of the kernel.
+
+# end of the "standard kernel features (expert users)" menu
+
+# syscall, maps, verifier
+config BPF_SYSCALL
+ bool "Enable bpf() system call"
+ select ANON_INODES
+ select BPF
+ default n
+ help
+ Enable the bpf() system call that allows to manipulate eBPF
+ programs and maps via file descriptors.
+
+config USERFAULTFD
+ bool "Enable userfaultfd() system call"
+ select ANON_INODES
+ depends on MMU
+ help
+ Enable the userfaultfd() system call that allows to intercept and
+ handle page faults in userland.
+
config EMBEDDED
bool "Embedded system"
option allnoconfig_y