Merge tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.18 development
  series:

   - New drivers for the Freescale i.MX21, Qualcomm APQ8084 pin
     controllers.

   - Incremental new features on the Rockchip, atlas 6, OMAP, AM437x,
     APQ8064, prima2, AT91, Tegra, i.MX, Berlin and Nomadik.

   - Push Freescale drivers down into their own subdirectory.

   - Assorted sprays of syntax and semantic fixes"

* tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  pinctrl: specify bindings for pins and groups
  pinctrl: nomadik: improve GPIO debug prints
  pinctrl: abx500: refactor DT parser to take two paths
  pinctrl: abx500: use helpers for map allocation/free
  pinctrl: alter device tree bindings for functions
  pinctrl: nomadik: refactor DT parser to take two paths
  pinctrl: nomadik: use utils map free function
  pinctrl: nomadik: use util function to reserve maps
  pinctrl: qcom: use restart_notifier mechanism for ps_hold
  pinctrl: sh-pfc: sh73a0: Remove unnecessary SoC data allocation
  pinctrl: berlin: fix the dt_free_map function
  pinctrl: at91: disable PD or PU before enabling PU or PD
  pinctrl: st: remove gpiochip in failure cases
  pinctrl: at91: Fix error handling while doing gpiochio_irqchip_add
  pinctrl: at91: Fix failure path in at91_gpio_probe path
  pinctrl: lantiq: Release gpiochip resources in fail case
  pinctrl: imx: detect uninitialized pins
  pinctrl: tegra: Add MIPI pad control
  pinctrl: at91: Switch to using managed clk_get
  pinctrl: adi2: Remove duplicate gpiochip_remove_pin_ranges
  ...

4 files changed, 11 insertions, 5 deletions

diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h
index 0fee6ff77ffc..bbca3d038900 100644
--- a/include/dt-bindings/pinctrl/at91.h
+++ b/include/dt-bindings/pinctrl/at91.h
@@ -20,6 +20,11 @@
 
 #define AT91_PINCTRL_PULL_UP_DEGLITCH	(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH)
 
+#define AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT		(0x0 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_LOW			(0x1 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_MED			(0x2 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_HI			(0x3 << 5)
+
 #define AT91_PIOA	0
 #define AT91_PIOB	1
 #define AT91_PIOC	2
diff --git a/include/dt-bindings/pinctrl/rockchip.h b/include/dt-bindings/pinctrl/rockchip.h
index cd5788be82ce..743e66a95e13 100644
--- a/include/dt-bindings/pinctrl/rockchip.h
+++ b/include/dt-bindings/pinctrl/rockchip.h
@@ -28,5 +28,7 @@
 #define RK_FUNC_GPIO	0
 #define RK_FUNC_1	1
 #define RK_FUNC_2	2
+#define RK_FUNC_3	3
+#define RK_FUNC_4	4
 
 #endif
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index a15f10727eb8..d578a60eff23 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -57,7 +57,7 @@
  *	which are then pulled up with an external resistor. Setting this
  *	config will enable open drain mode, the argument is ignored.
  * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
- *	(open emitter). Setting this config will enable open drain mode, the
+ *	(open emitter). Setting this config will enable open source mode, the
  *	argument is ignored.
  * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current
  *	passed as argument. The argument is in mA.
diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h
index 3097aafbeb24..511bda9ed4bf 100644
--- a/include/linux/pinctrl/pinmux.h
+++ b/include/linux/pinctrl/pinmux.h
@@ -39,13 +39,12 @@ struct pinctrl_dev;
  *	name can be used with the generic @pinctrl_ops to retrieve the
  *	actual pins affected. The applicable groups will be returned in
  *	@groups and the number of groups in @num_groups
- * @enable: enable a certain muxing function with a certain pin group. The
+ * @set_mux: enable a certain muxing function with a certain pin group. The
  *	driver does not need to figure out whether enabling this function
  *	conflicts some other use of the pins in that group, such collisions
  *	are handled by the pinmux subsystem. The @func_selector selects a
  *	certain function whereas @group_selector selects a certain set of pins
  *	to be used. On simple controllers the latter argument may be ignored
- * @disable: disable a certain muxing selector with a certain pin group
  * @gpio_request_enable: requests and enables GPIO on a certain pin.
  *	Implement this only if you can mux every pin individually as GPIO. The
  *	affected GPIO range is passed along with an offset(pin number) into that
@@ -68,8 +67,8 @@ struct pinmux_ops {
 				  unsigned selector,
 				  const char * const **groups,
 				  unsigned * const num_groups);
-	int (*enable) (struct pinctrl_dev *pctldev, unsigned func_selector,
-		       unsigned group_selector);
+	int (*set_mux) (struct pinctrl_dev *pctldev, unsigned func_selector,
+			unsigned group_selector);
 	int (*gpio_request_enable) (struct pinctrl_dev *pctldev,
 				    struct pinctrl_gpio_range *range,
 				    unsigned offset);