Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (58 commits)
  tty: split the lock up a bit further
  tty: Move the leader test in disassociate
  tty: Push the bkl down a bit in the hangup code
  tty: Push the lock down further into the ldisc code
  tty: push the BKL down into the handlers a bit
  tty: moxa: split open lock
  tty: moxa: Kill the use of lock_kernel
  tty: moxa: Fix modem op locking
  tty: moxa: Kill off the throttle method
  tty: moxa: Locking clean up
  tty: moxa: rework the locking a bit
  tty: moxa: Use more tty_port ops
  tty: isicom: fix deadlock on shutdown
  tty: mxser: Use the new locking rules to fix setserial properly
  tty: mxser: use the tty_port_open method
  tty: isicom: sort out the board init logic
  tty: isicom: switch to the new tty_port_open helper
  tty: tty_port: Add a kref object to the tty port
  tty: istallion: tty port open/close methods
  tty: stallion: Convert to the tty_port_open/close methods
  ...

5 files changed, 24 insertions, 120 deletions

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 5a5385749e16..f72914db2a11 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -214,7 +214,6 @@ unifdef-y += futex.h
 unifdef-y += fs.h
 unifdef-y += gameport.h
 unifdef-y += generic_serial.h
-unifdef-y += hayesesp.h
 unifdef-y += hdlcdrv.h
 unifdef-y += hdlc.h
 unifdef-y += hdreg.h
diff --git a/include/linux/hayesesp.h b/include/linux/hayesesp.h
deleted file mode 100644
index 92b08cfe4a75..000000000000
--- a/include/linux/hayesesp.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef HAYESESP_H
-#define HAYESESP_H
-
-struct hayes_esp_config {
-	short flow_on;
-	short flow_off;
-	short rx_trigger;
-	short tx_trigger;
-	short pio_threshold;
-	unsigned char rx_timeout;
-	char dma_channel;
-};
-
-#ifdef __KERNEL__
-
-#define ESP_DMA_CHANNEL   0
-#define ESP_RX_TRIGGER    768
-#define ESP_TX_TRIGGER    768
-#define ESP_FLOW_OFF      1016
-#define ESP_FLOW_ON       944
-#define ESP_RX_TMOUT      128
-#define ESP_PIO_THRESHOLD 32
-
-#define ESP_IN_MAJOR	57	/* major dev # for dial in */
-#define ESP_OUT_MAJOR	58	/* major dev # for dial out */
-#define ESPC_SCALE 	3
-#define UART_ESI_BASE	0x00
-#define UART_ESI_SID	0x01
-#define UART_ESI_RX	0x02
-#define UART_ESI_TX	0x02
-#define UART_ESI_CMD1	0x04
-#define UART_ESI_CMD2	0x05
-#define UART_ESI_STAT1	0x04
-#define UART_ESI_STAT2	0x05
-#define UART_ESI_RWS	0x07
-
-#define UART_IER_DMA_TMOUT	0x80
-#define UART_IER_DMA_TC		0x08
-
-#define ESI_SET_IRQ		0x04
-#define ESI_SET_DMA_TMOUT	0x05
-#define ESI_SET_SRV_MASK	0x06
-#define ESI_SET_ERR_MASK	0x07
-#define ESI_SET_FLOW_CNTL	0x08
-#define ESI_SET_FLOW_CHARS	0x09
-#define ESI_SET_FLOW_LVL	0x0a
-#define ESI_SET_TRIGGER		0x0b
-#define ESI_SET_RX_TIMEOUT	0x0c
-#define ESI_SET_FLOW_TMOUT	0x0d
-#define ESI_WRITE_UART		0x0e
-#define ESI_READ_UART		0x0f
-#define ESI_SET_MODE		0x10
-#define ESI_GET_ERR_STAT	0x12
-#define ESI_GET_UART_STAT	0x13
-#define ESI_GET_RX_AVAIL	0x14
-#define ESI_GET_TX_AVAIL	0x15
-#define ESI_START_DMA_RX	0x16
-#define ESI_START_DMA_TX	0x17
-#define ESI_ISSUE_BREAK		0x1a
-#define ESI_FLUSH_RX		0x1b
-#define ESI_FLUSH_TX		0x1c
-#define ESI_SET_BAUD		0x1d
-#define ESI_SET_ENH_IRQ		0x1f
-#define ESI_SET_REINTR		0x20
-#define ESI_SET_PRESCALAR	0x23
-#define ESI_NO_COMMAND		0xff
-
-#define ESP_STAT_RX_TIMEOUT	0x01
-#define ESP_STAT_DMA_RX		0x02
-#define ESP_STAT_DMA_TX		0x04
-#define ESP_STAT_NEVER_DMA      0x08
-#define ESP_STAT_USE_PIO        0x10
-
-#define ESP_MAGIC		0x53ee
-#define ESP_XMIT_SIZE		4096
-
-struct esp_struct {
-	int			magic;
-	struct tty_port		port;
-	spinlock_t		lock;
-	int			io_port;
-	int			irq;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			stat_flags;
-	int			custom_divisor;
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
-	int			IER; 	/* Interrupt Enable Register */
-	int			MCR; 	/* Modem control register */
-	unsigned long		last_active;
-	int			line;
-	unsigned char 		*xmit_buf;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	wait_queue_head_t	break_wait;
-	struct async_icount	icount;	/* kernel counters for the 4 input interrupts */
-	struct hayes_esp_config config; /* port configuration */
-	struct esp_struct	*next_port; /* For the linked list */
-};
-
-struct esp_pio_buffer {
-	unsigned char data[1024];
-	struct esp_pio_buffer *next;
-};
-
-#endif /* __KERNEL__ */
-
-
-#endif /* ESP_H */
-
diff --git a/include/linux/isicom.h b/include/linux/isicom.h
index bbd42197298f..b92e05650639 100644
--- a/include/linux/isicom.h
+++ b/include/linux/isicom.h
@@ -67,6 +67,7 @@
 
 #define		FIRMWARE_LOADED		0x0001
 #define		BOARD_ACTIVE		0x0002
+#define		BOARD_INIT		0x0004
 
  	/* isi_port status bitmap  */
 
diff --git a/include/linux/tty.h b/include/linux/tty.h
index f0f43d08d8b8..405a9035fe40 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -190,9 +190,17 @@ struct tty_port_operations {
 	/* Control the DTR line */
 	void (*dtr_rts)(struct tty_port *port, int raise);
 	/* Called when the last close completes or a hangup finishes
-	   IFF the port was initialized. Do not use to free resources */
+	   IFF the port was initialized. Do not use to free resources. Called
+	   under the port mutex to serialize against activate/shutdowns */
 	void (*shutdown)(struct tty_port *port);
 	void (*drop)(struct tty_port *port);
+	/* Called under the port mutex from tty_port_open, serialized using
+	   the port mutex */
+        /* FIXME: long term getting the tty argument *out* of this would be
+           good for consoles */
+	int (*activate)(struct tty_port *port, struct tty_struct *tty);
+	/* Called on the final put of a port */
+	void (*destruct)(struct tty_port *port);
 };
 	
 struct tty_port {
@@ -206,12 +214,14 @@ struct tty_port {
 	wait_queue_head_t	delta_msr_wait;	/* Modem status change */
 	unsigned long		flags;		/* TTY flags ASY_*/
 	struct mutex		mutex;		/* Locking */
+	struct mutex		buf_mutex;	/* Buffer alloc lock */
 	unsigned char		*xmit_buf;	/* Optional buffer */
 	unsigned int		close_delay;	/* Close port delay */
 	unsigned int		closing_wait;	/* Delay for output */
 	int			drain_delay;	/* Set to zero if no pure time
 						   based drain is needed else
 						   set to size of fifo */
+	struct kref		kref;		/* Ref counter */
 };
 
 /*
@@ -439,7 +449,7 @@ extern void initialize_tty_struct(struct tty_struct *tty,
 		struct tty_driver *driver, int idx);
 extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx,
 								int first_ok);
-extern void tty_release_dev(struct file *filp);
+extern int tty_release(struct inode *inode, struct file *filp);
 extern int tty_init_termios(struct tty_struct *tty);
 
 extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty);
@@ -454,6 +464,15 @@ extern int tty_write_lock(struct tty_struct *tty, int ndelay);
 extern void tty_port_init(struct tty_port *port);
 extern int tty_port_alloc_xmit_buf(struct tty_port *port);
 extern void tty_port_free_xmit_buf(struct tty_port *port);
+extern void tty_port_put(struct tty_port *port);
+
+extern inline struct tty_port *tty_port_get(struct tty_port *port)
+{
+	if (port)
+		kref_get(&port->kref);
+	return port;
+}
+
 extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
 extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
 extern int tty_port_carrier_raised(struct tty_port *port);
@@ -467,6 +486,8 @@ extern int tty_port_close_start(struct tty_port *port,
 extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
 extern void tty_port_close(struct tty_port *port,
 				struct tty_struct *tty, struct file *filp);
+extern int tty_port_open(struct tty_port *port,
+				struct tty_struct *tty, struct file *filp);
 extern inline int tty_port_users(struct tty_port *port)
 {
 	return port->count + port->blocked_open;
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index ce911ebf91e8..acf6e457c04b 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -39,8 +39,6 @@ enum port_dev_state {
  * @serial: pointer back to the struct usb_serial owner of this port.
  * @port: pointer to the corresponding tty_port for this port.
  * @lock: spinlock to grab when updating portions of this structure.
- * @mutex: mutex used to synchronize serial_open() and serial_close()
- *	access for this port.
  * @number: the number of the port (the minor number).
  * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
  * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
@@ -77,7 +75,6 @@ struct usb_serial_port {
 	struct usb_serial	*serial;
 	struct tty_port		port;
 	spinlock_t		lock;
-	struct mutex            mutex;
 	unsigned char		number;
 
 	unsigned char		*interrupt_in_buffer;