Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem

Conflicts:
	drivers/net/wireless/libertas/if_sdio.c

5 files changed, 317 insertions, 75 deletions

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 59962dbc2758..0cf9448a32c4 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2171,6 +2171,8 @@ extern void dev_seq_stop(struct seq_file *seq, void *v);
 extern int netdev_class_create_file(struct class_attribute *class_attr);
 extern void netdev_class_remove_file(struct class_attribute *class_attr);
 
+extern struct kobj_ns_type_operations net_ns_type_operations;
+
 extern char *netdev_drivername(const struct net_device *dev, char *buffer, int len);
 
 extern void linkwatch_run_queue(void);
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 2c8701687336..ec1690da7845 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -40,6 +40,43 @@
  */
 
 /**
+ * DOC: Frame transmission/registration support
+ *
+ * Frame transmission and registration support exists to allow userspace
+ * management entities such as wpa_supplicant react to management frames
+ * that are not being handled by the kernel. This includes, for example,
+ * certain classes of action frames that cannot be handled in the kernel
+ * for various reasons.
+ *
+ * Frame registration is done on a per-interface basis and registrations
+ * cannot be removed other than by closing the socket. It is possible to
+ * specify a registration filter to register, for example, only for a
+ * certain type of action frame. In particular with action frames, those
+ * that userspace registers for will not be returned as unhandled by the
+ * driver, so that the registered application has to take responsibility
+ * for doing that.
+ *
+ * The type of frame that can be registered for is also dependent on the
+ * driver and interface type. The frame types are advertised in wiphy
+ * attributes so applications know what to expect.
+ *
+ * NOTE: When an interface changes type while registrations are active,
+ *       these registrations are ignored until the interface type is
+ *       changed again. This means that changing the interface type can
+ *       lead to a situation that couldn't otherwise be produced, but
+ *       any such registrations will be dormant in the sense that they
+ *       will not be serviced, i.e. they will not receive any frames.
+ *
+ * Frame transmission allows userspace to send for example the required
+ * responses to action frames. It is subject to some sanity checking,
+ * but many frames can be transmitted. When a frame was transmitted, its
+ * status is indicated to the sending socket.
+ *
+ * For more technical details, see the corresponding command descriptions
+ * below.
+ */
+
+/**
  * enum nl80211_commands - supported nl80211 commands
  *
  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -301,16 +338,20 @@
  *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
  *	and @NL80211_ATTR_TX_RATES the set of allowed rates.
  *
- * @NL80211_CMD_REGISTER_ACTION: Register for receiving certain action frames
- *	(via @NL80211_CMD_ACTION) for processing in userspace. This command
- *	requires an interface index and a match attribute containing the first
- *	few bytes of the frame that should match, e.g. a single byte for only
- *	a category match or four bytes for vendor frames including the OUI.
- *	The registration cannot be dropped, but is removed automatically
- *	when the netlink socket is closed. Multiple registrations can be made.
- * @NL80211_CMD_ACTION: Action frame TX request and RX notification. This
- *	command is used both as a request to transmit an Action frame and as an
- *	event indicating reception of an Action frame that was not processed in
+ * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
+ *	(via @NL80211_CMD_FRAME) for processing in userspace. This command
+ *	requires an interface index, a frame type attribute (optional for
+ *	backward compatibility reasons, if not given assumes action frames)
+ *	and a match attribute containing the first few bytes of the frame
+ *	that should match, e.g. a single byte for only a category match or
+ *	four bytes for vendor frames including the OUI. The registration
+ *	cannot be dropped, but is removed automatically when the netlink
+ *	socket is closed. Multiple registrations can be made.
+ * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
+ *	backward compatibility
+ * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
+ *	command is used both as a request to transmit a management frame and
+ *	as an event indicating reception of a frame that was not processed in
  *	kernel code, but is for us (i.e., which may need to be processed in a
  *	user space application). %NL80211_ATTR_FRAME is used to specify the
  *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
@@ -320,11 +361,14 @@
  *	operational channel). When called, this operation returns a cookie
  *	(%NL80211_ATTR_COOKIE) that will be included with the TX status event
  *	pertaining to the TX request.
- * @NL80211_CMD_ACTION_TX_STATUS: Report TX status of an Action frame
- *	transmitted with %NL80211_CMD_ACTION. %NL80211_ATTR_COOKIE identifies
+ * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
+ * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
+ *	transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
  *	the TX command and %NL80211_ATTR_FRAME includes the contents of the
  *	frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
  *	the frame.
+ * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
+ *	backward compatibility.
  * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
  *	is used to configure connection quality monitoring notification trigger
  *	levels.
@@ -429,9 +473,12 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_TX_BITRATE_MASK,
 
-	NL80211_CMD_REGISTER_ACTION,
-	NL80211_CMD_ACTION,
-	NL80211_CMD_ACTION_TX_STATUS,
+	NL80211_CMD_REGISTER_FRAME,
+	NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
+	NL80211_CMD_FRAME,
+	NL80211_CMD_ACTION = NL80211_CMD_FRAME,
+	NL80211_CMD_FRAME_TX_STATUS,
+	NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
 
 	NL80211_CMD_SET_POWER_SAVE,
 	NL80211_CMD_GET_POWER_SAVE,
@@ -708,7 +755,16 @@ enum nl80211_commands {
  *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
  *
  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
- *	at least one byte, currently used with @NL80211_CMD_REGISTER_ACTION.
+ *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
+ * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
+ *	@NL80211_CMD_REGISTER_FRAME command.
+ * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ *	information about which frame types can be transmitted with
+ *	%NL80211_CMD_FRAME.
+ * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
+ *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
+ *	information about which frame types can be registered for RX.
  *
  * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
  *	acknowledged by the recipient.
@@ -891,6 +947,10 @@ enum nl80211_attrs {
 	NL80211_ATTR_WIPHY_TX_POWER_SETTING,
 	NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
 
+	NL80211_ATTR_TX_FRAME_TYPES,
+	NL80211_ATTR_RX_FRAME_TYPES,
+	NL80211_ATTR_FRAME_TYPE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -947,7 +1007,7 @@ enum nl80211_attrs {
  * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
  * @NL80211_IFTYPE_MESH_POINT: mesh point
  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @__NL80211_IFTYPE_AFTER_LAST: internal use
+ * @NUM_NL80211_IFTYPES: number of defined interface types
  *
  * These values are used with the %NL80211_ATTR_IFTYPE
  * to set the type of an interface.
@@ -964,8 +1024,8 @@ enum nl80211_iftype {
 	NL80211_IFTYPE_MESH_POINT,
 
 	/* keep last */
-	__NL80211_IFTYPE_AFTER_LAST,
-	NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1
+	NUM_NL80211_IFTYPES,
+	NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
 };
 
 /**
@@ -974,11 +1034,14 @@ enum nl80211_iftype {
  * Station flags. When a station is added to an AP interface, it is
  * assumed to be already associated (and hence authenticated.)
  *
+ * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
  * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
  * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
  *	with short barker preamble
  * @NL80211_STA_FLAG_WME: station is WME/QoS capable
  * @NL80211_STA_FLAG_MFP: station uses management frame protection
+ * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
+ * @__NL80211_STA_FLAG_AFTER_LAST: internal use
  */
 enum nl80211_sta_flags {
 	__NL80211_STA_FLAG_INVALID,
@@ -1091,14 +1154,17 @@ enum nl80211_mpath_flags {
  * information about a mesh path.
  *
  * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_ATTR_MPATH_SN: destination sequence number
- * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
- * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
- * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
+ * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
+ * @NL80211_MPATH_INFO_SN: destination sequence number
+ * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
+ * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
+ * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
  * 	&enum nl80211_mpath_flags;
- * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
- * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
+ *	currently defind
+ * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
  */
 enum nl80211_mpath_info {
 	__NL80211_MPATH_INFO_INVALID,
@@ -1127,6 +1193,8 @@ enum nl80211_mpath_info {
  * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
  * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
  * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
+ * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_band_attr {
 	__NL80211_BAND_ATTR_INVALID,
@@ -1147,6 +1215,7 @@ enum nl80211_band_attr {
 
 /**
  * enum nl80211_frequency_attr - frequency attributes
+ * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
  * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
  *	regulatory domain.
@@ -1158,6 +1227,9 @@ enum nl80211_band_attr {
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
  *	(100 * dBm).
+ * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
+ *	currently defined
+ * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_frequency_attr {
 	__NL80211_FREQUENCY_ATTR_INVALID,
@@ -1177,9 +1249,13 @@ enum nl80211_frequency_attr {
 
 /**
  * enum nl80211_bitrate_attr - bitrate attributes
+ * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
  * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
  *	in 2.4 GHz band.
+ * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
+ *	currently defined
+ * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_bitrate_attr {
 	__NL80211_BITRATE_ATTR_INVALID,
@@ -1235,6 +1311,7 @@ enum nl80211_reg_type {
 
 /**
  * enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
  * 	considerations for a given frequency range. These are the
  * 	&enum nl80211_reg_rule_flags.
@@ -1251,6 +1328,9 @@ enum nl80211_reg_type {
  * 	If you don't have one then don't send this.
  * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
  * 	a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
+ *	currently defined
+ * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_reg_rule_attr {
 	__NL80211_REG_RULE_ATTR_INVALID,
@@ -1302,6 +1382,9 @@ enum nl80211_reg_rule_flags {
  * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
  * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+ *	currently defined
+ * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
  */
 enum nl80211_survey_info {
 	__NL80211_SURVEY_INFO_INVALID,
@@ -1466,6 +1549,7 @@ enum nl80211_channel_type {
  * enum nl80211_bss - netlink attributes for a BSS
  *
  * @__NL80211_BSS_INVALID: invalid
+ * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
  * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
  * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
  * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
@@ -1509,6 +1593,12 @@ enum nl80211_bss {
 
 /**
  * enum nl80211_bss_status - BSS "status"
+ * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
+ * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
+ *
+ * The BSS status is a BSS attribute in scan dumps, which
+ * indicates the status the interface has wrt. this BSS.
  */
 enum nl80211_bss_status {
 	NL80211_BSS_STATUS_AUTHENTICATED,
@@ -1619,8 +1709,8 @@ enum nl80211_tx_rate_attributes {
 
 /**
  * enum nl80211_band - Frequency band
- * @NL80211_BAND_2GHZ - 2.4 GHz ISM band
- * @NL80211_BAND_5GHZ - around 5 GHz band (4.9 - 5.7 GHz)
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+ * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
  */
 enum nl80211_band {
 	NL80211_BAND_2GHZ,
@@ -1658,9 +1748,9 @@ enum nl80211_attr_cqm {
 
 /**
  * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW - The RSSI level is lower than the
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
  *      configured threshold
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH - The RSSI is higher than the
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
  *      configured threshold
  */
 enum nl80211_cqm_rssi_threshold_event {
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index a6d5225b9275..11daf9c140e7 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -97,6 +97,7 @@
 #define  SSB_TMSLOW_RESET	0x00000001 /* Reset */
 #define  SSB_TMSLOW_REJECT_22	0x00000002 /* Reject (Backplane rev 2.2) */
 #define  SSB_TMSLOW_REJECT_23	0x00000004 /* Reject (Backplane rev 2.3) */
+#define  SSB_TMSLOW_PHYCLK	0x00000010 /* MAC PHY Clock Control Enable */
 #define  SSB_TMSLOW_CLOCK	0x00010000 /* Clock Enable */
 #define  SSB_TMSLOW_FGC		0x00020000 /* Force Gated Clocks On */
 #define  SSB_TMSLOW_PE		0x40000000 /* Power Management Enable */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2fd06c60ffbb..f2740537b5d6 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -25,6 +25,43 @@
 #include <linux/wireless.h>
 
 
+/**
+ * DOC: Introduction
+ *
+ * cfg80211 is the configuration API for 802.11 devices in Linux. It bridges
+ * userspace and drivers, and offers some utility functionality associated
+ * with 802.11. cfg80211 must, directly or indirectly via mac80211, be used
+ * by all modern wireless drivers in Linux, so that they offer a consistent
+ * API through nl80211. For backward compatibility, cfg80211 also offers
+ * wireless extensions to userspace, but hides them from drivers completely.
+ *
+ * Additionally, cfg80211 contains code to help enforce regulatory spectrum
+ * use restrictions.
+ */
+
+
+/**
+ * DOC: Device registration
+ *
+ * In order for a driver to use cfg80211, it must register the hardware device
+ * with cfg80211. This happens through a number of hardware capability structs
+ * described below.
+ *
+ * The fundamental structure for each device is the 'wiphy', of which each
+ * instance describes a physical wireless device connected to the system. Each
+ * such wiphy can have zero, one, or many virtual interfaces associated with
+ * it, which need to be identified as such by pointing the network interface's
+ * @ieee80211_ptr pointer to a &struct wireless_dev which further describes
+ * the wireless part of the interface, normally this struct is embedded in the
+ * network interface's private data area. Drivers can optionally allow creating
+ * or destroying virtual interfaces on the fly, but without at least one or the
+ * ability to create some the wireless device isn't useful.
+ *
+ * Each wiphy structure contains device capability information, and also has
+ * a pointer to the various operations the driver offers. The definitions and
+ * structures here describe these capabilities in detail.
+ */
+
 /*
  * wireless hardware capability structures
  */
@@ -205,6 +242,21 @@ struct ieee80211_supported_band {
  */
 
 /**
+ * DOC: Actions and configuration
+ *
+ * Each wireless device and each virtual interface offer a set of configuration
+ * operations and other actions that are invoked by userspace. Each of these
+ * actions is described in the operations structure, and the parameters these
+ * operations use are described separately.
+ *
+ * Additionally, some operations are asynchronous and expect to get status
+ * information via some functions that drivers need to call.
+ *
+ * Scanning and BSS list handling with its associated functionality is described
+ * in a separate chapter.
+ */
+
+/**
  * struct vif_params - describes virtual interface parameters
  * @mesh_id: mesh ID to use
  * @mesh_id_len: length of the mesh ID
@@ -570,8 +622,28 @@ struct ieee80211_txq_params {
 /* from net/wireless.h */
 struct wiphy;
 
-/* from net/ieee80211.h */
-struct ieee80211_channel;
+/**
+ * DOC: Scanning and BSS list handling
+ *
+ * The scanning process itself is fairly simple, but cfg80211 offers quite
+ * a bit of helper functionality. To start a scan, the scan operation will
+ * be invoked with a scan definition. This scan definition contains the
+ * channels to scan, and the SSIDs to send probe requests for (including the
+ * wildcard, if desired). A passive scan is indicated by having no SSIDs to
+ * probe. Additionally, a scan request may contain extra information elements
+ * that should be added to the probe request. The IEs are guaranteed to be
+ * well-formed, and will not exceed the maximum length the driver advertised
+ * in the wiphy structure.
+ *
+ * When scanning finds a BSS, cfg80211 needs to be notified of that, because
+ * it is responsible for maintaining the BSS list; the driver should not
+ * maintain a list itself. For this notification, various functions exist.
+ *
+ * Since drivers do not maintain a BSS list, there are also a number of
+ * functions to search for a BSS and obtain information about it from the
+ * BSS structure cfg80211 maintains. The BSS list is also made available
+ * to userspace.
+ */
 
 /**
  * struct cfg80211_ssid - SSID description
@@ -1020,7 +1092,7 @@ struct cfg80211_pmksa {
  * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
  *	This allows the operation to be terminated prior to timeout based on
  *	the duration value.
- * @action: Transmit an action frame
+ * @mgmt_tx: Transmit a management frame
  *
  * @testmode_cmd: run a test mode command
  *
@@ -1172,7 +1244,7 @@ struct cfg80211_ops {
 					    struct net_device *dev,
 					    u64 cookie);
 
-	int	(*action)(struct wiphy *wiphy, struct net_device *dev,
+	int	(*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev,
 			  struct ieee80211_channel *chan,
 			  enum nl80211_channel_type channel_type,
 			  bool channel_type_valid,
@@ -1236,6 +1308,10 @@ struct mac_address {
 	u8 addr[ETH_ALEN];
 };
 
+struct ieee80211_txrx_stypes {
+	u16 tx, rx;
+};
+
 /**
  * struct wiphy - wireless hardware description
  * @reg_notifier: the driver's regulatory notification callback
@@ -1286,6 +1362,10 @@ struct mac_address {
  * @privid: a pointer that drivers can use to identify if an arbitrary
  *	wiphy is theirs, e.g. in global notifiers
  * @bands: information about bands/channels supported by this device
+ *
+ * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or
+ *	transmitted through nl80211, points to an array indexed by interface
+ *	type
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -1294,9 +1374,12 @@ struct wiphy {
 	u8 perm_addr[ETH_ALEN];
 	u8 addr_mask[ETH_ALEN];
 
-	u16 n_addresses;
 	struct mac_address *addresses;
 
+	const struct ieee80211_txrx_stypes *mgmt_stypes;
+
+	u16 n_addresses;
+
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
 	u16 interface_modes;
 
@@ -1492,8 +1575,8 @@ struct cfg80211_cached_keys;
  *	set by driver (if supported) on add_interface BEFORE registering the
  *	netdev and may otherwise be used by driver read-only, will be update
  *	by cfg80211 on change_interface
- * @action_registrations: list of registrations for action frames
- * @action_registrations_lock: lock for the list
+ * @mgmt_registrations: list of registrations for management frames
+ * @mgmt_registrations_lock: lock for the list
  * @mtx: mutex used to lock data in this struct
  * @cleanup_work: work struct used for cleanup that can't be done directly
  */
@@ -1505,8 +1588,8 @@ struct wireless_dev {
 	struct list_head list;
 	struct net_device *netdev;
 
-	struct list_head action_registrations;
-	spinlock_t action_registrations_lock;
+	struct list_head mgmt_registrations;
+	spinlock_t mgmt_registrations_lock;
 
 	struct mutex mtx;
 
@@ -1563,8 +1646,10 @@ static inline void *wdev_priv(struct wireless_dev *wdev)
 	return wiphy_priv(wdev->wiphy);
 }
 
-/*
- * Utility functions
+/**
+ * DOC: Utility functions
+ *
+ * cfg80211 offers a number of utility functions that can be useful.
  */
 
 /**
@@ -1715,7 +1800,15 @@ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
  * ieee80211_hdrlen - get header length in bytes from frame control
  * @fc: frame control field in little-endian format
  */
-unsigned int ieee80211_hdrlen(__le16 fc);
+unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
+
+/**
+ * DOC: Data path helpers
+ *
+ * In addition to generic utilities, cfg80211 also offers
+ * functions that help implement the data path for devices
+ * that do not do the 802.11/802.3 conversion on the device.
+ */
 
 /**
  * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3
@@ -1777,8 +1870,10 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb);
  */
 const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
 
-/*
- * Regulatory helper functions for wiphys
+/**
+ * DOC: Regulatory enforcement infrastructure
+ *
+ * TODO
  */
 
 /**
@@ -2181,6 +2276,20 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
 void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
 
 /**
+ * DOC: RFkill integration
+ *
+ * RFkill integration in cfg80211 is almost invisible to drivers,
+ * as cfg80211 automatically registers an rfkill instance for each
+ * wireless device it knows about. Soft kill is also translated
+ * into disconnecting and turning all interfaces off, drivers are
+ * expected to turn off the device when all interfaces are down.
+ *
+ * However, devices may have a hard RFkill line, in which case they
+ * also need to interact with the rfkill subsystem, via cfg80211.
+ * They can do this with a few helper functions documented here.
+ */
+
+/**
  * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state
  * @wiphy: the wiphy
  * @blocked: block status
@@ -2201,6 +2310,17 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
 
 #ifdef CONFIG_NL80211_TESTMODE
 /**
+ * DOC: Test mode
+ *
+ * Test mode is a set of utility functions to allow drivers to
+ * interact with driver-specific tools to aid, for instance,
+ * factory programming.
+ *
+ * This chapter describes how drivers interact with it, for more
+ * information see the nl80211 book's chapter on it.
+ */
+
+/**
  * cfg80211_testmode_alloc_reply_skb - allocate testmode reply
  * @wiphy: the wiphy
  * @approxlen: an upper bound of the length of the data that will
@@ -2373,38 +2493,39 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
 		      struct station_info *sinfo, gfp_t gfp);
 
 /**
- * cfg80211_rx_action - notification of received, unprocessed Action frame
+ * cfg80211_rx_mgmt - notification of received, unprocessed management frame
  * @dev: network device
  * @freq: Frequency on which the frame was received in MHz
- * @buf: Action frame (header + body)
+ * @buf: Management frame (header + body)
  * @len: length of the frame data
  * @gfp: context flags
- * Returns %true if a user space application is responsible for rejecting the
- *	unrecognized Action frame; %false if no such application is registered
- *	(i.e., the driver is responsible for rejecting the unrecognized Action
- *	frame)
+ *
+ * Returns %true if a user space application has registered for this frame.
+ * For action frames, that makes it responsible for rejecting unrecognized
+ * action frames; %false otherwise, in which case for action frames the
+ * driver is responsible for rejecting the frame.
  *
  * This function is called whenever an Action frame is received for a station
  * mode interface, but is not processed in kernel.
  */
-bool cfg80211_rx_action(struct net_device *dev, int freq, const u8 *buf,
-			size_t len, gfp_t gfp);
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
+		      size_t len, gfp_t gfp);
 
 /**
- * cfg80211_action_tx_status - notification of TX status for Action frame
+ * cfg80211_mgmt_tx_status - notification of TX status for management frame
  * @dev: network device
- * @cookie: Cookie returned by cfg80211_ops::action()
- * @buf: Action frame (header + body)
+ * @cookie: Cookie returned by cfg80211_ops::mgmt_tx()
+ * @buf: Management frame (header + body)
  * @len: length of the frame data
  * @ack: Whether frame was acknowledged
  * @gfp: context flags
  *
- * This function is called whenever an Action frame was requested to be
- * transmitted with cfg80211_ops::action() to report the TX status of the
+ * This function is called whenever a management frame was requested to be
+ * transmitted with cfg80211_ops::mgmt_tx() to report the TX status of the
  * transmission attempt.
  */
-void cfg80211_action_tx_status(struct net_device *dev, u64 cookie,
-			       const u8 *buf, size_t len, bool ack, gfp_t gfp);
+void cfg80211_mgmt_tx_status(struct net_device *dev, u64 cookie,
+			     const u8 *buf, size_t len, bool ack, gfp_t gfp);
 
 
 /**
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b0787a1dea90..2a1811366076 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -149,6 +149,7 @@ struct ieee80211_low_level_stats {
  * @BSS_CHANGED_ARP_FILTER: Hardware ARP filter address list or state changed.
  * @BSS_CHANGED_QOS: QoS for this association was enabled/disabled. Note
  *	that it is only ever disabled for station mode.
+ * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface.
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -165,6 +166,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_IBSS		= 1<<11,
 	BSS_CHANGED_ARP_FILTER		= 1<<12,
 	BSS_CHANGED_QOS			= 1<<13,
+	BSS_CHANGED_IDLE		= 1<<14,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -223,6 +225,9 @@ enum ieee80211_bss_change {
  *	hardware must not perform any ARP filtering. Note, that the filter will
  *	be enabled also in promiscuous mode.
  * @qos: This is a QoS-enabled BSS.
+ * @idle: This interface is idle. There's also a global idle flag in the
+ *	hardware config which may be more appropriate depending on what
+ *	your driver/device needs to do.
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
@@ -247,6 +252,7 @@ struct ieee80211_bss_conf {
 	u8 arp_addr_cnt;
 	bool arp_filter_enabled;
 	bool qos;
+	bool idle;
 };
 
 /**
@@ -783,20 +789,6 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
 }
 
 /**
- * enum ieee80211_key_alg - key algorithm
- * @ALG_WEP: WEP40 or WEP104
- * @ALG_TKIP: TKIP
- * @ALG_CCMP: CCMP (AES)
- * @ALG_AES_CMAC: AES-128-CMAC
- */
-enum ieee80211_key_alg {
-	ALG_WEP,
-	ALG_TKIP,
-	ALG_CCMP,
-	ALG_AES_CMAC,
-};
-
-/**
  * enum ieee80211_key_flags - key flags
  *
  * These flags are used for communication about keys between the driver
@@ -833,7 +825,7 @@ enum ieee80211_key_flags {
  * @hw_key_idx: To be set by the driver, this is the key index the driver
  *	wants to be given when a frame is transmitted and needs to be
  *	encrypted in hardware.
- * @alg: The key algorithm.
+ * @cipher: The key's cipher suite selector.
  * @flags: key flags, see &enum ieee80211_key_flags.
  * @keyidx: the key index (0-3)
  * @keylen: key material length
@@ -846,7 +838,7 @@ enum ieee80211_key_flags {
  * @iv_len: The IV length for this key type
  */
 struct ieee80211_key_conf {
-	enum ieee80211_key_alg alg;
+	u32 cipher;
 	u8 icv_len;
 	u8 iv_len;
 	u8 hw_key_idx;
@@ -1102,6 +1094,10 @@ enum ieee80211_hw_flags {
  *
  * @max_rates: maximum number of alternate rate retry stages
  * @max_rate_tries: maximum number of tries for each stage
+ *
+ * @napi_weight: weight used for NAPI polling.  You must specify an
+ *	appropriate value here if a napi_poll operation is provided
+ *	by your driver.
  */
 struct ieee80211_hw {
 	struct ieee80211_conf conf;
@@ -1113,6 +1109,7 @@ struct ieee80211_hw {
 	int channel_change_time;
 	int vif_data_size;
 	int sta_data_size;
+	int napi_weight;
 	u16 queues;
 	u16 max_listen_interval;
 	s8 max_signal;
@@ -1687,6 +1684,8 @@ enum ieee80211_ampdu_mlme_action {
  *	switch operation for CSAs received from the AP may implement this
  *	callback. They must then call ieee80211_chswitch_done() to indicate
  *	completion of the channel switch.
+ *
+ * @napi_poll: Poll Rx queue for incoming data frames.
  */
 struct ieee80211_ops {
 	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1752,6 +1751,7 @@ struct ieee80211_ops {
 	void (*flush)(struct ieee80211_hw *hw, bool drop);
 	void (*channel_switch)(struct ieee80211_hw *hw,
 			       struct ieee80211_channel_switch *ch_switch);
+	int (*napi_poll)(struct ieee80211_hw *hw, int budget);
 };
 
 /**
@@ -1897,6 +1897,22 @@ void ieee80211_free_hw(struct ieee80211_hw *hw);
  */
 void ieee80211_restart_hw(struct ieee80211_hw *hw);
 
+/** ieee80211_napi_schedule - schedule NAPI poll
+ *
+ * Use this function to schedule NAPI polling on a device.
+ *
+ * @hw: the hardware to start polling
+ */
+void ieee80211_napi_schedule(struct ieee80211_hw *hw);
+
+/** ieee80211_napi_complete - complete NAPI polling
+ *
+ * Use this function to finish NAPI polling on a device.
+ *
+ * @hw: the hardware to stop polling
+ */
+void ieee80211_napi_complete(struct ieee80211_hw *hw);
+
 /**
  * ieee80211_rx - receive frame
  *
@@ -2518,6 +2534,18 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
  */
 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success);
 
+/**
+ * ieee80211_request_smps - request SM PS transition
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @smps_mode: new SM PS mode
+ *
+ * This allows the driver to request an SM PS transition in managed
+ * mode. This is useful when the driver has more information than
+ * the stack about possible interference, for example by bluetooth.
+ */
+void ieee80211_request_smps(struct ieee80211_vif *vif,
+			    enum ieee80211_smps_mode smps_mode);
+
 /* Rate control API */
 
 /**