Merge tag 'regulator-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This has been a very busy release for the core, some fixes, one large
  new feature and a big bit of refactoring to update the GPIO API:

   - Support for coupled regulators from Dmitry Osipenko based on a
     prior attempt by Maciej Purski, allowing us to handle situations
     where the voltages on two regulators can't be too far apart from
     each other.

   - Conversion of the GPIO support in both drivers and the core to use
     GPIO descriptors rather than numbers, part of the overall project
     to remove GPIO numbers.

   - Support for standby mode suspend states from Andrei Stefanescu.

   - New drivers for Allwinner AXP209, Cirrus Logic Lochnagar and
     Microchip MPC16502"

* tag 'regulator-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (90 commits)
  regulator: tps65910: fix a missing check of return value
  regulator: mcp16502: Select REGMAP_I2C to fix build error
  regulator: convert to DEFINE_SHOW_ATTRIBUTE
  regulator: mcp16502: Fix missing n_voltages setting
  regulator: mcp16502: Use #ifdef CONFIG_PM_SLEEP around mcp16502_suspend/resume_noirq
  regulator: mcp16502: code cleanup
  regulator: act8945a-regulator: make symbol act8945a_pm static
  drivers/regulator: fix a missing check of return value
  regulator: act8945a-regulator: fix 'defined but not used' compiler warning
  regulator: axp20x: fix set_ramp_delay for AXP209/dcdc2
  regulator: mcp16502: add support for suspend
  mfd: axp20x: use explicit bit defines
  mfd: axp20x: Clean up included headers
  regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2
  dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LDO3
  regulator: axp20x: add software based soft_start for AXP209 LDO3
  dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209
  regulator: axp20x: add support for set_ramp_delay for AXP209
  mfd: axp20x: name voltage ramping define properly
  regulator: mcp16502: add regulator driver for MCP16502
  ...

8 files changed, 67 insertions, 10 deletions

diff --git a/include/dt-bindings/regulator/active-semi,8945a-regulator.h b/include/dt-bindings/regulator/active-semi,8945a-regulator.h
new file mode 100644
index 000000000000..9bdba5e3141a
--- /dev/null
+++ b/include/dt-bindings/regulator/active-semi,8945a-regulator.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 Microchip Technology, Inc. All rights reserved.
+ *
+ * Device Tree binding constants for the ACT8945A PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_ACT8945A_H
+#define _DT_BINDINGS_REGULATOR_ACT8945A_H
+
+/*
+ * These constants should be used to specify regulator modes in device tree for
+ * ACT8945A regulators as follows:
+ * ACT8945A_REGULATOR_MODE_FIXED:	It is specific to DCDC regulators and it
+ *					specifies the usage of fixed-frequency
+ *					PWM.
+ *
+ * ACT8945A_REGULATOR_MODE_NORMAL:	It is specific to LDO regulators and it
+ *					specifies the usage of normal mode.
+ *
+ * ACT8945A_REGULATOR_MODE_LOWPOWER:	For DCDC and LDO regulators; it specify
+ *					the usage of proprietary power-saving
+ *					mode.
+ */
+
+#define ACT8945A_REGULATOR_MODE_FIXED		1
+#define ACT8945A_REGULATOR_MODE_NORMAL		2
+#define ACT8945A_REGULATOR_MODE_LOWPOWER	3
+
+#endif
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index f2f887795d43..8aebcf822082 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -104,6 +104,7 @@ struct gpio_descs *__must_check
 devm_gpiod_get_array_optional(struct device *dev, const char *con_id,
 			      enum gpiod_flags flags);
 void devm_gpiod_put(struct device *dev, struct gpio_desc *desc);
+void devm_gpiod_unhinge(struct device *dev, struct gpio_desc *desc);
 void devm_gpiod_put_array(struct device *dev, struct gpio_descs *descs);
 
 int gpiod_get_direction(struct gpio_desc *desc);
@@ -172,6 +173,10 @@ int desc_to_gpio(const struct gpio_desc *desc);
 struct device_node;
 struct fwnode_handle;
 
+struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
+					 const char *propname, int index,
+					 enum gpiod_flags dflags,
+					 const char *label);
 struct gpio_desc *devm_gpiod_get_from_of_node(struct device *dev,
 					      struct device_node *node,
 					      const char *propname, int index,
@@ -245,6 +250,15 @@ static inline void gpiod_put(struct gpio_desc *desc)
 	WARN_ON(1);
 }
 
+static inline void devm_gpiod_unhinge(struct device *dev,
+				      struct gpio_desc *desc)
+{
+	might_sleep();
+
+	/* GPIO can never have been requested */
+	WARN_ON(1);
+}
+
 static inline void gpiod_put_array(struct gpio_descs *descs)
 {
 	might_sleep();
@@ -518,6 +532,15 @@ struct device_node;
 struct fwnode_handle;
 
 static inline
+struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
+					 const char *propname, int index,
+					 enum gpiod_flags dflags,
+					 const char *label)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline
 struct gpio_desc *devm_gpiod_get_from_of_node(struct device *dev,
 					      struct device_node *node,
 					      const char *propname, int index,
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 517e60eecbcb..1293695245df 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -35,7 +35,7 @@ enum axp20x_variants {
 #define AXP152_ALDO_OP_MODE		0x13
 #define AXP152_LDO0_CTRL		0x15
 #define AXP152_DCDC2_V_OUT		0x23
-#define AXP152_DCDC2_V_SCAL		0x25
+#define AXP152_DCDC2_V_RAMP		0x25
 #define AXP152_DCDC1_V_OUT		0x26
 #define AXP152_DCDC3_V_OUT		0x27
 #define AXP152_ALDO12_V_OUT		0x28
@@ -53,7 +53,7 @@ enum axp20x_variants {
 #define AXP20X_USB_OTG_STATUS		0x02
 #define AXP20X_PWR_OUT_CTRL		0x12
 #define AXP20X_DCDC2_V_OUT		0x23
-#define AXP20X_DCDC2_LDO3_V_SCAL	0x25
+#define AXP20X_DCDC2_LDO3_V_RAMP	0x25
 #define AXP20X_DCDC3_V_OUT		0x27
 #define AXP20X_LDO24_V_OUT		0x28
 #define AXP20X_LDO3_V_OUT		0x29
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index b19c370fe81a..f346167c0e00 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -20,9 +20,6 @@
 #define WM8994_NUM_AIF   3
 
 struct wm8994_ldo_pdata {
-	/** GPIOs to enable regulator, 0 or less if not available */
-	int enable;
-
 	const struct regulator_init_data *init_data;
 };
 
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 25602afd4844..f3f76051e8b0 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -508,7 +508,7 @@ static inline int regulator_get_error_flags(struct regulator *regulator,
 
 static inline int regulator_set_load(struct regulator *regulator, int load_uA)
 {
-	return REGULATOR_MODE_NORMAL;
+	return 0;
 }
 
 static inline int regulator_allow_bypass(struct regulator *regulator,
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index a9c030192147..389bcaf7900f 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -15,11 +15,12 @@
 #ifndef __LINUX_REGULATOR_DRIVER_H_
 #define __LINUX_REGULATOR_DRIVER_H_
 
-#define MAX_COUPLED		4
+#define MAX_COUPLED		2
 
 #include <linux/device.h>
 #include <linux/notifier.h>
 #include <linux/regulator/consumer.h>
+#include <linux/ww_mutex.h>
 
 struct gpio_desc;
 struct regmap;
@@ -462,7 +463,7 @@ struct regulator_dev {
 	struct coupling_desc coupling_desc;
 
 	struct blocking_notifier_head notifier;
-	struct mutex mutex; /* consumer lock */
+	struct ww_mutex mutex; /* consumer lock */
 	struct task_struct *mutex_owner;
 	int ref_cnt;
 	struct module *owner;
@@ -473,7 +474,6 @@ struct regulator_dev {
 	struct regmap *regmap;
 
 	struct delayed_work disable_work;
-	int deferred_disables;
 
 	void *reg_data;		/* regulator_dev data */
 
@@ -545,4 +545,7 @@ int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
 					  bool enable);
 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
 
+void regulator_lock(struct regulator_dev *rdev);
+void regulator_unlock(struct regulator_dev *rdev);
+
 #endif
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index a459a5e973a7..1d34a70ffda2 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -158,6 +158,9 @@ struct regulation_constraints {
 	/* used for coupled regulators */
 	int max_spread;
 
+	/* used for changing voltage in steps */
+	int max_uV_step;
+
 	/* valid regulator operating modes for this machine */
 	unsigned int valid_modes_mask;
 
diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h
index cb5aecd40f07..331d7d940c7a 100644
--- a/include/linux/regulator/pfuze100.h
+++ b/include/linux/regulator/pfuze100.h
@@ -33,7 +33,8 @@
 #define PFUZE100_VGEN4		12
 #define PFUZE100_VGEN5		13
 #define PFUZE100_VGEN6		14
-#define PFUZE100_MAX_REGULATOR	15
+#define PFUZE100_COIN		15
+#define PFUZE100_MAX_REGULATOR	16
 
 #define PFUZE200_SW1AB		0
 #define PFUZE200_SW2		1