summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-07-13 12:07:44 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-07-13 12:07:44 -0700
commitb5e16170f59b4ae38937b795a56a356fb95cca56 (patch)
tree7ed40053c10f5ce2982beb2195a2faf22a42d91e /include
parentda16dd9785f88680c4affe176c07e85067d4fdd7 (diff)
parent7d84120b5ba61912a5333f5fe2c4e8f35ef9514f (diff)
downloadlinux-b5e16170f59b4ae38937b795a56a356fb95cca56.tar.bz2
Merge tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris: "General updates: - Cleanups and additional flash support for "dataflash" driver - new driver for mchp23k256 SPI SRAM device - improve handling of MTDs without eraseblocks (i.e., MTD_NO_ERASE) - refactor and improve "sub-partition" handling with TRX partition parser; partitions can now be created as sub-partitions of another partition SPINOR updates, from Cyrille Pitchen and Marek Vasut: - introduce support to the SPI 1-2-2 and 1-4-4 protocols. - introduce support to the Double Data Rate (DDR) mode. - introduce support to the Octo SPI protocols. - add support to new memory parts for Spansion, Macronix and Winbond. - add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers. - clean up the st_spi_fsm driver. NAND updates, from Boris Brezillon: - addition of on-die ECC support to Micron driver - addition of helpers to help drivers choose most appropriate ECC settings - deletion of dead-code (cached programming and ->errstat() hook) - make sure drivers that do not support the SET/GET FEATURES command return ENOTSUPP use a dummy ->set/get_features implementation returning -ENOTSUPP (required for Micron on-die ECC) - change the semantic of ecc->write_page() for drivers setting the NAND_ECC_CUSTOM_PAGE_ACCESS flag - support exiting 'GET STATUS' command in default ->cmdfunc() implementations - change the prototype of ->setup_data_interface() A bunch of driver related changes: - various cleanup, fixes and improvements of the MTK driver - OMAP DT bindings fixes - support for ->setup_data_interface() in the fsmc driver - support for imx7 in the gpmi driver - finalization of the denali driver rework (thanks to Masahiro for the work he's done on this driver) - fix "bitflips in erased pages" handling in the ifc driver - addition of PM ops and dynamic timing configuration to the atmel driver" * tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd: (118 commits) Documentation: ABI: mtd: describe "offset" more precisely mtd: Fix check in mtd_unpoint() mtd: nand: mtk: release lock on error path mtd: st_spi_fsm: remove SPINOR_OP_RDSR2 and use SPINOR_OP_RDCR instead mtd: spi-nor: cqspi: remove duplicate const mtd: spi-nor: Add support for Spansion S25FL064L mtd: spi-nor: Add support for mx66u51235f mtd: nand: mtk: add ->setup_data_interface() hook mtd: nand: mtk: remove unneeded mtk_ecc_hw_init from mtk_ecc_resume mtd: nand: mtk: remove unneeded mtk_nfc_hw_init from mtk_nfc_resume mtd: nand: mtk: disable ecc irq when writing page with hwecc mtd: nand: mtk: fix incorrect register setting order about ecc irq mtd: partitions: fixup some allocate_partition() whitespace mtd: parsers: trx: fix pr_err format for printing offset MAINTAINERS: Update SPI NOR subsystem git repositories mtd: extract TRX parser out of bcm47xxpart into a separated module mtd: partitions: add support for partition parsers mtd: partitions: add support for subpartitions mtd: partitions: rename "master" to the "parent" where appropriate mtd: partitions: remove sysfs files when deleting all master's partitions ...
Diffstat (limited to 'include')
-rw-r--r--include/linux/mtd/nand.h80
-rw-r--r--include/linux/mtd/partitions.h7
-rw-r--r--include/linux/mtd/spi-nor.h161
3 files changed, 230 insertions, 18 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index de0d889e4fe1..892148c448cc 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -107,6 +107,8 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
#define NAND_STATUS_READY 0x40
#define NAND_STATUS_WP 0x80
+#define NAND_DATA_IFACE_CHECK_ONLY -1
+
/*
* Constants for ECC_MODES
*/
@@ -116,6 +118,7 @@ typedef enum {
NAND_ECC_HW,
NAND_ECC_HW_SYNDROME,
NAND_ECC_HW_OOB_FIRST,
+ NAND_ECC_ON_DIE,
} nand_ecc_modes_t;
enum nand_ecc_algo {
@@ -257,6 +260,8 @@ struct nand_chip;
/* Vendor-specific feature address (Micron) */
#define ONFI_FEATURE_ADDR_READ_RETRY 0x89
+#define ONFI_FEATURE_ON_DIE_ECC 0x90
+#define ONFI_FEATURE_ON_DIE_ECC_EN BIT(3)
/* ONFI subfeature parameters length */
#define ONFI_SUBFEATURE_PARAM_LEN 4
@@ -477,6 +482,44 @@ static inline void nand_hw_control_init(struct nand_hw_control *nfc)
}
/**
+ * struct nand_ecc_step_info - ECC step information of ECC engine
+ * @stepsize: data bytes per ECC step
+ * @strengths: array of supported strengths
+ * @nstrengths: number of supported strengths
+ */
+struct nand_ecc_step_info {
+ int stepsize;
+ const int *strengths;
+ int nstrengths;
+};
+
+/**
+ * struct nand_ecc_caps - capability of ECC engine
+ * @stepinfos: array of ECC step information
+ * @nstepinfos: number of ECC step information
+ * @calc_ecc_bytes: driver's hook to calculate ECC bytes per step
+ */
+struct nand_ecc_caps {
+ const struct nand_ecc_step_info *stepinfos;
+ int nstepinfos;
+ int (*calc_ecc_bytes)(int step_size, int strength);
+};
+
+/* a shorthand to generate struct nand_ecc_caps with only one ECC stepsize */
+#define NAND_ECC_CAPS_SINGLE(__name, __calc, __step, ...) \
+static const int __name##_strengths[] = { __VA_ARGS__ }; \
+static const struct nand_ecc_step_info __name##_stepinfo = { \
+ .stepsize = __step, \
+ .strengths = __name##_strengths, \
+ .nstrengths = ARRAY_SIZE(__name##_strengths), \
+}; \
+static const struct nand_ecc_caps __name = { \
+ .stepinfos = &__name##_stepinfo, \
+ .nstepinfos = 1, \
+ .calc_ecc_bytes = __calc, \
+}
+
+/**
* struct nand_ecc_ctrl - Control structure for ECC
* @mode: ECC mode
* @algo: ECC algorithm
@@ -815,7 +858,10 @@ struct nand_manufacturer_ops {
* @read_retries: [INTERN] the number of read retry modes supported
* @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
* @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
- * @setup_data_interface: [OPTIONAL] setup the data interface and timing
+ * @setup_data_interface: [OPTIONAL] setup the data interface and timing. If
+ * chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this
+ * means the configuration should not be applied but
+ * only checked.
* @bbt: [INTERN] bad block table pointer
* @bbt_td: [REPLACEABLE] bad block table descriptor for flash
* lookup.
@@ -826,9 +872,6 @@ struct nand_manufacturer_ops {
* structure which is shared among multiple independent
* devices.
* @priv: [OPTIONAL] pointer to private chip data
- * @errstat: [OPTIONAL] hardware specific function to perform
- * additional error status checks (determine if errors are
- * correctable).
* @manufacturer: [INTERN] Contains manufacturer information
*/
@@ -852,16 +895,13 @@ struct nand_chip {
int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
int (*erase)(struct mtd_info *mtd, int page);
int (*scan_bbt)(struct mtd_info *mtd);
- int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
- int status, int page);
int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode);
- int (*setup_data_interface)(struct mtd_info *mtd,
- const struct nand_data_interface *conf,
- bool check_only);
+ int (*setup_data_interface)(struct mtd_info *mtd, int chipnr,
+ const struct nand_data_interface *conf);
int chip_delay;
@@ -1244,6 +1284,15 @@ int nand_check_erased_ecc_chunk(void *data, int datalen,
void *extraoob, int extraooblen,
int threshold);
+int nand_check_ecc_caps(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
+int nand_match_ecc_req(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
+int nand_maximize_ecc(struct nand_chip *chip,
+ const struct nand_ecc_caps *caps, int oobavail);
+
/* Default write_oob implementation */
int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
@@ -1258,6 +1307,19 @@ int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page);
+/* Stub used by drivers that do not support GET/SET FEATURES operations */
+int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd,
+ struct nand_chip *chip, int addr,
+ u8 *subfeature_param);
+
+/* Default read_page_raw implementation */
+int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page);
+
+/* Default write_page_raw implementation */
+int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page);
+
/* Reset and initialize a NAND device */
int nand_reset(struct nand_chip *chip, int chipnr);
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index 06df1e06b6e0..c4beb70dacbd 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -20,6 +20,12 @@
*
* For each partition, these fields are available:
* name: string that will be used to label the partition's MTD device.
+ * types: some partitions can be containers using specific format to describe
+ * embedded subpartitions / volumes. E.g. many home routers use "firmware"
+ * partition that contains at least kernel and rootfs. In such case an
+ * extra parser is needed that will detect these dynamic partitions and
+ * report them to the MTD subsystem. If set this property stores an array
+ * of parser names to use when looking for subpartitions.
* size: the partition size; if defined as MTDPART_SIZ_FULL, the partition
* will extend to the end of the master MTD device.
* offset: absolute starting position within the master MTD device; if
@@ -38,6 +44,7 @@
struct mtd_partition {
const char *name; /* identifier string */
+ const char *const *types; /* names of parsers to use if any */
uint64_t size; /* partition size */
uint64_t offset; /* offset within the master MTD space */
uint32_t mask_flags; /* master MTD flags to mask out for this partition */
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index f2a718030476..55faa2f07cca 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -73,6 +73,15 @@
#define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */
#define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */
+/* Double Transfer Rate opcodes - defined in JEDEC JESD216B. */
+#define SPINOR_OP_READ_1_1_1_DTR 0x0d
+#define SPINOR_OP_READ_1_2_2_DTR 0xbd
+#define SPINOR_OP_READ_1_4_4_DTR 0xed
+
+#define SPINOR_OP_READ_1_1_1_DTR_4B 0x0e
+#define SPINOR_OP_READ_1_2_2_DTR_4B 0xbe
+#define SPINOR_OP_READ_1_4_4_DTR_4B 0xee
+
/* Used for SST flashes only. */
#define SPINOR_OP_BP 0x02 /* Byte program */
#define SPINOR_OP_WRDI 0x04 /* Write disable */
@@ -119,13 +128,81 @@
/* Configuration Register bits. */
#define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */
-enum read_mode {
- SPI_NOR_NORMAL = 0,
- SPI_NOR_FAST,
- SPI_NOR_DUAL,
- SPI_NOR_QUAD,
+/* Supported SPI protocols */
+#define SNOR_PROTO_INST_MASK GENMASK(23, 16)
+#define SNOR_PROTO_INST_SHIFT 16
+#define SNOR_PROTO_INST(_nbits) \
+ ((((unsigned long)(_nbits)) << SNOR_PROTO_INST_SHIFT) & \
+ SNOR_PROTO_INST_MASK)
+
+#define SNOR_PROTO_ADDR_MASK GENMASK(15, 8)
+#define SNOR_PROTO_ADDR_SHIFT 8
+#define SNOR_PROTO_ADDR(_nbits) \
+ ((((unsigned long)(_nbits)) << SNOR_PROTO_ADDR_SHIFT) & \
+ SNOR_PROTO_ADDR_MASK)
+
+#define SNOR_PROTO_DATA_MASK GENMASK(7, 0)
+#define SNOR_PROTO_DATA_SHIFT 0
+#define SNOR_PROTO_DATA(_nbits) \
+ ((((unsigned long)(_nbits)) << SNOR_PROTO_DATA_SHIFT) & \
+ SNOR_PROTO_DATA_MASK)
+
+#define SNOR_PROTO_IS_DTR BIT(24) /* Double Transfer Rate */
+
+#define SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits) \
+ (SNOR_PROTO_INST(_inst_nbits) | \
+ SNOR_PROTO_ADDR(_addr_nbits) | \
+ SNOR_PROTO_DATA(_data_nbits))
+#define SNOR_PROTO_DTR(_inst_nbits, _addr_nbits, _data_nbits) \
+ (SNOR_PROTO_IS_DTR | \
+ SNOR_PROTO_STR(_inst_nbits, _addr_nbits, _data_nbits))
+
+enum spi_nor_protocol {
+ SNOR_PROTO_1_1_1 = SNOR_PROTO_STR(1, 1, 1),
+ SNOR_PROTO_1_1_2 = SNOR_PROTO_STR(1, 1, 2),
+ SNOR_PROTO_1_1_4 = SNOR_PROTO_STR(1, 1, 4),
+ SNOR_PROTO_1_1_8 = SNOR_PROTO_STR(1, 1, 8),
+ SNOR_PROTO_1_2_2 = SNOR_PROTO_STR(1, 2, 2),
+ SNOR_PROTO_1_4_4 = SNOR_PROTO_STR(1, 4, 4),
+ SNOR_PROTO_1_8_8 = SNOR_PROTO_STR(1, 8, 8),
+ SNOR_PROTO_2_2_2 = SNOR_PROTO_STR(2, 2, 2),
+ SNOR_PROTO_4_4_4 = SNOR_PROTO_STR(4, 4, 4),
+ SNOR_PROTO_8_8_8 = SNOR_PROTO_STR(8, 8, 8),
+
+ SNOR_PROTO_1_1_1_DTR = SNOR_PROTO_DTR(1, 1, 1),
+ SNOR_PROTO_1_2_2_DTR = SNOR_PROTO_DTR(1, 2, 2),
+ SNOR_PROTO_1_4_4_DTR = SNOR_PROTO_DTR(1, 4, 4),
+ SNOR_PROTO_1_8_8_DTR = SNOR_PROTO_DTR(1, 8, 8),
};
+static inline bool spi_nor_protocol_is_dtr(enum spi_nor_protocol proto)
+{
+ return !!(proto & SNOR_PROTO_IS_DTR);
+}
+
+static inline u8 spi_nor_get_protocol_inst_nbits(enum spi_nor_protocol proto)
+{
+ return ((unsigned long)(proto & SNOR_PROTO_INST_MASK)) >>
+ SNOR_PROTO_INST_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_addr_nbits(enum spi_nor_protocol proto)
+{
+ return ((unsigned long)(proto & SNOR_PROTO_ADDR_MASK)) >>
+ SNOR_PROTO_ADDR_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_data_nbits(enum spi_nor_protocol proto)
+{
+ return ((unsigned long)(proto & SNOR_PROTO_DATA_MASK)) >>
+ SNOR_PROTO_DATA_SHIFT;
+}
+
+static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto)
+{
+ return spi_nor_get_protocol_data_nbits(proto);
+}
+
#define SPI_NOR_MAX_CMD_SIZE 8
enum spi_nor_ops {
SPI_NOR_OPS_READ = 0,
@@ -154,9 +231,11 @@ enum spi_nor_option_flags {
* @read_opcode: the read opcode
* @read_dummy: the dummy needed by the read operation
* @program_opcode: the program opcode
- * @flash_read: the mode of the read
* @sst_write_second: used by the SST write operation
* @flags: flag options for the current SPI-NOR (SNOR_F_*)
+ * @read_proto: the SPI protocol for read operations
+ * @write_proto: the SPI protocol for write operations
+ * @reg_proto the SPI protocol for read_reg/write_reg/erase operations
* @cmd_buf: used by the write_reg
* @prepare: [OPTIONAL] do some preparations for the
* read/write/erase/lock/unlock operations
@@ -185,7 +264,9 @@ struct spi_nor {
u8 read_opcode;
u8 read_dummy;
u8 program_opcode;
- enum read_mode flash_read;
+ enum spi_nor_protocol read_proto;
+ enum spi_nor_protocol write_proto;
+ enum spi_nor_protocol reg_proto;
bool sst_write_second;
u32 flags;
u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
@@ -220,10 +301,71 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
}
/**
+ * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
+ * supported by the SPI controller (bus master).
+ * @mask: the bitmask listing all the supported hw capabilies
+ */
+struct spi_nor_hwcaps {
+ u32 mask;
+};
+
+/*
+ *(Fast) Read capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * As a matter of performances, it is relevant to use Octo SPI protocols first,
+ * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
+ * (Slow) Read.
+ */
+#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0)
+#define SNOR_HWCAPS_READ BIT(0)
+#define SNOR_HWCAPS_READ_FAST BIT(1)
+#define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2)
+
+#define SNOR_HWCAPS_READ_DUAL GENMASK(6, 3)
+#define SNOR_HWCAPS_READ_1_1_2 BIT(3)
+#define SNOR_HWCAPS_READ_1_2_2 BIT(4)
+#define SNOR_HWCAPS_READ_2_2_2 BIT(5)
+#define SNOR_HWCAPS_READ_1_2_2_DTR BIT(6)
+
+#define SNOR_HWCAPS_READ_QUAD GENMASK(10, 7)
+#define SNOR_HWCAPS_READ_1_1_4 BIT(7)
+#define SNOR_HWCAPS_READ_1_4_4 BIT(8)
+#define SNOR_HWCAPS_READ_4_4_4 BIT(9)
+#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10)
+
+#define SNOR_HWCPAS_READ_OCTO GENMASK(14, 11)
+#define SNOR_HWCAPS_READ_1_1_8 BIT(11)
+#define SNOR_HWCAPS_READ_1_8_8 BIT(12)
+#define SNOR_HWCAPS_READ_8_8_8 BIT(13)
+#define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14)
+
+/*
+ * Page Program capabilities.
+ * MUST be ordered by priority: the higher bit position, the higher priority.
+ * Like (Fast) Read capabilities, Octo/Quad SPI protocols are preferred to the
+ * legacy SPI 1-1-1 protocol.
+ * Note that Dual Page Programs are not supported because there is no existing
+ * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
+ * implements such commands.
+ */
+#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16)
+#define SNOR_HWCAPS_PP BIT(16)
+
+#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17)
+#define SNOR_HWCAPS_PP_1_1_4 BIT(17)
+#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
+#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
+
+#define SNOR_HWCAPS_PP_OCTO GENMASK(22, 20)
+#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
+#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
+#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
+
+/**
* spi_nor_scan() - scan the SPI NOR
* @nor: the spi_nor structure
* @name: the chip type name
- * @mode: the read mode supported by the driver
+ * @hwcaps: the hardware capabilities supported by the controller driver
*
* The drivers can use this fuction to scan the SPI NOR.
* In the scanning, it will try to get all the necessary information to
@@ -233,6 +375,7 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
*
* Return: 0 for success, others for failure.
*/
-int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode);
+int spi_nor_scan(struct spi_nor *nor, const char *name,
+ const struct spi_nor_hwcaps *hwcaps);
#endif