Merge tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl changes from Linus Walleij:
 "These are the main pinctrl changes for the v3.9 merge window.  The
  most interesting change by far is how the device core grabs pinctrl
  default handles avoiding the need to stick boilerplate into driver
  consumers.

   - Grabbing of default pinctrl handles from the device core.  These
     are the hunks hitting drivers/base.  All is ACKed by Greg, after a
     long discussion about different alternatives.

   - Some stuff also touches the MFD and ARM SoC trees, this has been
     coordinated and ACKed.

   - New drivers for:
     - The Tegra 114 sub-SoC
     - Allwinner sunxi
     - New ABx500 driver and sub-SoC drivers for AB8500, AB8505, AB9540
       and AB8540.

   - Make it possible for hogged pins to enter a sleep mode, and make it
     possible for drivers to control that mode.

   - Various clean-up, extensions and device tree support to various pin
     controllers."

* tag 'pinctrl-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (68 commits)
  pinctrl: tegra: add clfvs function to Tegra114 support
  pinctrl: generic: rename input schmitt disable
  pinctrl/pinconfig: add debug interface
  pinctrl: samsung: remove duplicated line
  ARM: ux500: use real AB8500 IRQ numbers instead of virtual ones
  ARM: ux500: remove irq_base property from platform_data
  pinctrl/abx500: use direct IRQ defines
  pinctrl/abx500: replace IRQ offsets with table read-in values
  pinctrl/abx500: move IRQ handling to ab8500-core
  pinctrl: exynos5440: remove erroneous __init
  pinctrl/abx500: adjust offset for get_mode()
  pinctrl/abx500: add Device Tree support
  pinctrl/abx500: align GPIO cluster boundaries
  pinctrl/abx500: prevent error path from corrupting returning error
  pinctrl: sunxi: add of_xlate function
  pinctrl/lantiq: fix pin number in ltq_pmx_gpio_request_enable
  pinctrl/lantiq: add functionality to falcon_pinconf_dbg_show
  pinctrl/lantiq: fix pinconfig parameters
  pinctrl/lantiq: one of the boot leds was defined incorrectly
  pinctrl/lantiq: only probe available pad controllers
  ...

6 files changed, 303 insertions, 61 deletions

diff --git a/include/linux/device.h b/include/linux/device.h
index 43dcda937ddf..001f6637aa47 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -21,6 +21,7 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/mutex.h>
+#include <linux/pinctrl/devinfo.h>
 #include <linux/pm.h>
 #include <linux/atomic.h>
 #include <linux/ratelimit.h>
@@ -620,6 +621,8 @@ struct acpi_dev_node {
  * @pm_domain:	Provide callbacks that are executed during system suspend,
  * 		hibernation, system resume and during runtime PM transitions
  * 		along with subsystem-level and driver-level callbacks.
+ * @pins:	For device pin management.
+ *		See Documentation/pinctrl.txt for details.
  * @numa_node:	NUMA node this device is close to.
  * @dma_mask:	Dma mask (if dma'ble device).
  * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
@@ -672,6 +675,10 @@ struct device {
 	struct dev_pm_info	power;
 	struct dev_pm_domain	*pm_domain;
 
+#ifdef CONFIG_PINCTRL
+	struct dev_pin_info	*pins;
+#endif
+
 #ifdef CONFIG_NUMA
 	int		numa_node;	/* NUMA node this device is close to */
 #endif
diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h
index 2387c207ea86..172b2f201ae0 100644
--- a/include/linux/mfd/abx500/ab8500-gpio.h
+++ b/include/linux/mfd/abx500/ab8500-gpio.h
@@ -14,10 +14,20 @@
  * registers.
  */
 
-struct ab8500_gpio_platform_data {
+struct abx500_gpio_platform_data {
 	int gpio_base;
-	u32 irq_base;
-	u8  config_reg[8];
+};
+
+enum abx500_gpio_pull_updown {
+	ABX500_GPIO_PULL_DOWN = 0x0,
+	ABX500_GPIO_PULL_NONE = 0x1,
+	ABX500_GPIO_PULL_UP = 0x3,
+};
+
+enum abx500_gpio_vinsel {
+	ABX500_GPIO_VINSEL_VBAT = 0x0,
+	ABX500_GPIO_VINSEL_VIN_1V8 = 0x1,
+	ABX500_GPIO_VINSEL_VDD_BIF = 0x2,
 };
 
 #endif /* _AB8500_GPIO_H */
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 1cb5698b4d76..fc0534483c72 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -24,7 +24,7 @@ enum ab8500_version {
 	AB8500_VERSION_AB8500 = 0x0,
 	AB8500_VERSION_AB8505 = 0x1,
 	AB8500_VERSION_AB9540 = 0x2,
-	AB8500_VERSION_AB8540 = 0x3,
+	AB8500_VERSION_AB8540 = 0x4,
 	AB8500_VERSION_UNDEFINED,
 };
 
@@ -32,6 +32,7 @@ enum ab8500_version {
 #define AB8500_CUTEARLY	0x00
 #define AB8500_CUT1P0	0x10
 #define AB8500_CUT1P1	0x11
+#define AB8500_CUT1P2	0x12 /* Only valid for AB8540 */
 #define AB8500_CUT2P0	0x20
 #define AB8500_CUT3P0	0x30
 #define AB8500_CUT3P3	0x33
@@ -39,6 +40,7 @@ enum ab8500_version {
 /*
  * AB8500 bank addresses
  */
+#define AB8500_M_FSM_RANK	0x0
 #define AB8500_SYS_CTRL1_BLOCK	0x1
 #define AB8500_SYS_CTRL2_BLOCK	0x2
 #define AB8500_REGU_CTRL1	0x3
@@ -58,6 +60,7 @@ enum ab8500_version {
 #define AB8500_DEVELOPMENT	0x11
 #define AB8500_DEBUG		0x12
 #define AB8500_PROD_TEST	0x13
+#define AB8500_STE_TEST		0x14
 #define AB8500_OTP_EMUL		0x15
 
 /*
@@ -65,11 +68,11 @@ enum ab8500_version {
  * Values used to index into array ab8500_irq_regoffset[] defined in
  * drivers/mdf/ab8500-core.c
  */
-/* Definitions for AB8500 and AB9540 */
+/* Definitions for AB8500, AB9540 and AB8540 */
 /* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */
 #define AB8500_INT_MAIN_EXT_CH_NOT_OK	0 /* not 8505/9540 */
-#define AB8500_INT_UN_PLUG_TV_DET	1 /* not 8505/9540 */
-#define AB8500_INT_PLUG_TV_DET		2 /* not 8505/9540 */
+#define AB8500_INT_UN_PLUG_TV_DET	1 /* not 8505/9540/8540 */
+#define AB8500_INT_PLUG_TV_DET		2 /* not 8505/9540/8540 */
 #define AB8500_INT_TEMP_WARM		3
 #define AB8500_INT_PON_KEY2DB_F		4
 #define AB8500_INT_PON_KEY2DB_R		5
@@ -77,18 +80,19 @@ enum ab8500_version {
 #define AB8500_INT_PON_KEY1DB_R		7
 /* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */
 #define AB8500_INT_BATT_OVV		8
-#define AB8500_INT_MAIN_CH_UNPLUG_DET	10 /* not 8505 */
-#define AB8500_INT_MAIN_CH_PLUG_DET	11 /* not 8505 */
+#define AB8500_INT_MAIN_CH_UNPLUG_DET	10 /* not 8505/8540 */
+#define AB8500_INT_MAIN_CH_PLUG_DET	11 /* not 8505/8540 */
 #define AB8500_INT_VBUS_DET_F		14
 #define AB8500_INT_VBUS_DET_R		15
 /* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */
 #define AB8500_INT_VBUS_CH_DROP_END	16
 #define AB8500_INT_RTC_60S		17
 #define AB8500_INT_RTC_ALARM		18
+#define AB8540_INT_BIF_INT		19
 #define AB8500_INT_BAT_CTRL_INDB	20
 #define AB8500_INT_CH_WD_EXP		21
 #define AB8500_INT_VBUS_OVV		22
-#define AB8500_INT_MAIN_CH_DROP_END	23 /* not 8505/9540 */
+#define AB8500_INT_MAIN_CH_DROP_END	23 /* not 8505/9540/8540 */
 /* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */
 #define AB8500_INT_CCN_CONV_ACC		24
 #define AB8500_INT_INT_AUD		25
@@ -99,7 +103,7 @@ enum ab8500_version {
 #define AB8500_INT_BUP_CHG_NOT_OK	30
 #define AB8500_INT_BUP_CHG_OK		31
 /* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */
-#define AB8500_INT_GP_HW_ADC_CONV_END	32 /* not 8505 */
+#define AB8500_INT_GP_HW_ADC_CONV_END	32 /* not 8505/8540 */
 #define AB8500_INT_ACC_DETECT_1DB_F	33
 #define AB8500_INT_ACC_DETECT_1DB_R	34
 #define AB8500_INT_ACC_DETECT_22DB_F	35
@@ -108,23 +112,23 @@ enum ab8500_version {
 #define AB8500_INT_ACC_DETECT_21DB_R	38
 #define AB8500_INT_GP_SW_ADC_CONV_END	39
 /* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */
-#define AB8500_INT_GPIO6R		40 /* not 8505/9540 */
-#define AB8500_INT_GPIO7R		41 /* not 8505/9540 */
-#define AB8500_INT_GPIO8R		42 /* not 8505/9540 */
-#define AB8500_INT_GPIO9R		43 /* not 8505/9540 */
-#define AB8500_INT_GPIO10R		44
-#define AB8500_INT_GPIO11R		45
-#define AB8500_INT_GPIO12R		46 /* not 8505 */
-#define AB8500_INT_GPIO13R		47
+#define AB8500_INT_GPIO6R		40 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO7R		41 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO8R		42 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO9R		43 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO10R		44 /* not 8540 */
+#define AB8500_INT_GPIO11R		45 /* not 8540 */
+#define AB8500_INT_GPIO12R		46 /* not 8505/8540 */
+#define AB8500_INT_GPIO13R		47 /* not 8540 */
 /* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */
-#define AB8500_INT_GPIO24R		48 /* not 8505 */
-#define AB8500_INT_GPIO25R		49 /* not 8505 */
-#define AB8500_INT_GPIO36R		50 /* not 8505/9540 */
-#define AB8500_INT_GPIO37R		51 /* not 8505/9540 */
-#define AB8500_INT_GPIO38R		52 /* not 8505/9540 */
-#define AB8500_INT_GPIO39R		53 /* not 8505/9540 */
-#define AB8500_INT_GPIO40R		54
-#define AB8500_INT_GPIO41R		55
+#define AB8500_INT_GPIO24R		48 /* not 8505/8540 */
+#define AB8500_INT_GPIO25R		49 /* not 8505/8540 */
+#define AB8500_INT_GPIO36R		50 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO37R		51 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO38R		52 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO39R		53 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO40R		54 /* not 8540 */
+#define AB8500_INT_GPIO41R		55 /* not 8540 */
 /* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */
 #define AB8500_INT_GPIO6F		56 /* not 8505/9540 */
 #define AB8500_INT_GPIO7F		57 /* not 8505/9540 */
@@ -135,14 +139,14 @@ enum ab8500_version {
 #define AB8500_INT_GPIO12F		62 /* not 8505 */
 #define AB8500_INT_GPIO13F		63
 /* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */
-#define AB8500_INT_GPIO24F		64 /* not 8505 */
-#define AB8500_INT_GPIO25F		65 /* not 8505 */
-#define AB8500_INT_GPIO36F		66 /* not 8505/9540 */
-#define AB8500_INT_GPIO37F		67 /* not 8505/9540 */
-#define AB8500_INT_GPIO38F		68 /* not 8505/9540 */
-#define AB8500_INT_GPIO39F		69 /* not 8505/9540 */
-#define AB8500_INT_GPIO40F		70
-#define AB8500_INT_GPIO41F		71
+#define AB8500_INT_GPIO24F		64 /* not 8505/8540 */
+#define AB8500_INT_GPIO25F		65 /* not 8505/8540 */
+#define AB8500_INT_GPIO36F		66 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO37F		67 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO38F		68 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO39F		69 /* not 8505/9540/8540 */
+#define AB8500_INT_GPIO40F		70 /* not 8540 */
+#define AB8500_INT_GPIO41F		71 /* not 8540 */
 /* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */
 #define AB8500_INT_ADP_SOURCE_ERROR	72
 #define AB8500_INT_ADP_SINK_ERROR	73
@@ -160,42 +164,44 @@ enum ab8500_version {
 #define AB8500_INT_SRP_DETECT		88
 #define AB8500_INT_USB_CHARGER_NOT_OKR	89
 #define AB8500_INT_ID_WAKEUP_R		90
+#define AB8500_INT_ID_DET_PLUGR         91 /* 8505/9540 cut2.0 */
 #define AB8500_INT_ID_DET_R1R		92
 #define AB8500_INT_ID_DET_R2R		93
 #define AB8500_INT_ID_DET_R3R		94
 #define AB8500_INT_ID_DET_R4R		95
 /* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */
-#define AB8500_INT_ID_WAKEUP_F		96
-#define AB8500_INT_ID_DET_R1F		98
-#define AB8500_INT_ID_DET_R2F		99
-#define AB8500_INT_ID_DET_R3F		100
-#define AB8500_INT_ID_DET_R4F		101
-#define AB8500_INT_CHAUTORESTARTAFTSEC  102
+#define AB8500_INT_ID_WAKEUP_F		96 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_PLUGF		97 /* 8505/9540 cut2.0 */
+#define AB8500_INT_ID_DET_R1F		98 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_R2F		99 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_R3F		100 /* not 8505/9540 */
+#define AB8500_INT_ID_DET_R4F		101 /* not 8505/9540 */
+#define AB8500_INT_CHAUTORESTARTAFTSEC	102 /* not 8505/9540 */
 #define AB8500_INT_CHSTOPBYSEC		103
 /* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */
 #define AB8500_INT_USB_CH_TH_PROT_F	104
-#define AB8500_INT_USB_CH_TH_PROT_R    105
+#define AB8500_INT_USB_CH_TH_PROT_R	105
 #define AB8500_INT_MAIN_CH_TH_PROT_F	106 /* not 8505/9540 */
 #define AB8500_INT_MAIN_CH_TH_PROT_R	107 /* not 8505/9540 */
 #define AB8500_INT_CHCURLIMNOHSCHIRP	109
 #define AB8500_INT_CHCURLIMHSCHIRP	110
 #define AB8500_INT_XTAL32K_KO		111
 
-/* Definitions for AB9540 */
+/* Definitions for AB9540 / AB8505 */
 /* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */
-#define AB9540_INT_GPIO50R		113
-#define AB9540_INT_GPIO51R		114 /* not 8505 */
-#define AB9540_INT_GPIO52R		115
-#define AB9540_INT_GPIO53R		116
-#define AB9540_INT_GPIO54R		117 /* not 8505 */
+#define AB9540_INT_GPIO50R		113 /* not 8540 */
+#define AB9540_INT_GPIO51R		114 /* not 8505/8540 */
+#define AB9540_INT_GPIO52R		115 /* not 8540 */
+#define AB9540_INT_GPIO53R		116 /* not 8540 */
+#define AB9540_INT_GPIO54R		117 /* not 8505/8540 */
 #define AB9540_INT_IEXT_CH_RF_BFN_R	118
-#define AB9540_INT_IEXT_CH_RF_BFN_F	119
 /* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */
-#define AB9540_INT_GPIO50F		121
-#define AB9540_INT_GPIO51F		122 /* not 8505 */
-#define AB9540_INT_GPIO52F		123
-#define AB9540_INT_GPIO53F		124
-#define AB9540_INT_GPIO54F		125 /* not 8505 */
+#define AB9540_INT_GPIO50F		121 /* not 8540 */
+#define AB9540_INT_GPIO51F		122 /* not 8505/8540 */
+#define AB9540_INT_GPIO52F		123 /* not 8540 */
+#define AB9540_INT_GPIO53F		124 /* not 8540 */
+#define AB9540_INT_GPIO54F		125 /* not 8505/8540 */
+#define AB9540_INT_IEXT_CH_RF_BFN_F	126
 /* ab8500_irq_regoffset[16] -> IT[Source|Latch|Mask]25 */
 #define AB8505_INT_KEYSTUCK		128
 #define AB8505_INT_IKR			129
@@ -204,6 +210,87 @@ enum ab8500_version {
 #define AB8505_INT_KEYDEGLITCH		132
 #define AB8505_INT_MODPWRSTATUSF	134
 #define AB8505_INT_MODPWRSTATUSR	135
+/* ab8500_irq_regoffset[17] -> IT[Source|Latch|Mask]6 */
+#define AB8500_INT_HOOK_DET_NEG_F	138
+#define AB8500_INT_HOOK_DET_NEG_R	139
+#define AB8500_INT_HOOK_DET_POS_F	140
+#define AB8500_INT_HOOK_DET_POS_R	141
+#define AB8500_INT_PLUG_DET_COMP_F	142
+#define AB8500_INT_PLUG_DET_COMP_R	143
+/* ab8500_irq_regoffset[18] -> IT[Source|Latch|Mask]23 */
+#define AB8505_INT_COLL			144
+#define AB8505_INT_RESERR		145
+#define AB8505_INT_FRAERR		146
+#define AB8505_INT_COMERR		147
+#define AB8505_INT_SPDSET		148
+#define AB8505_INT_DSENT		149
+#define AB8505_INT_DREC			150
+#define AB8505_INT_ACC_INT		151
+/* ab8500_irq_regoffset[19] -> IT[Source|Latch|Mask]24 */
+#define AB8505_INT_NOPINT		152
+/* ab8540_irq_regoffset[20] -> IT[Source|Latch|Mask]26 */
+#define AB8540_INT_IDPLUGDETCOMPF	160
+#define AB8540_INT_IDPLUGDETCOMPR	161
+#define AB8540_INT_FMDETCOMPLOF		162
+#define AB8540_INT_FMDETCOMPLOR		163
+#define AB8540_INT_FMDETCOMPHIF		164
+#define AB8540_INT_FMDETCOMPHIR		165
+#define AB8540_INT_ID5VDETCOMPF		166
+#define AB8540_INT_ID5VDETCOMPR		167
+/* ab8540_irq_regoffset[21] -> IT[Source|Latch|Mask]27 */
+#define AB8540_INT_GPIO43F		168
+#define AB8540_INT_GPIO43R		169
+#define AB8540_INT_GPIO44F		170
+#define AB8540_INT_GPIO44R		171
+#define AB8540_INT_KEYPOSDETCOMPF	172
+#define AB8540_INT_KEYPOSDETCOMPR	173
+#define AB8540_INT_KEYNEGDETCOMPF	174
+#define AB8540_INT_KEYNEGDETCOMPR	175
+/* ab8540_irq_regoffset[22] -> IT[Source|Latch|Mask]28 */
+#define AB8540_INT_GPIO1VBATF		176
+#define AB8540_INT_GPIO1VBATR		177
+#define AB8540_INT_GPIO2VBATF		178
+#define AB8540_INT_GPIO2VBATR		179
+#define AB8540_INT_GPIO3VBATF		180
+#define AB8540_INT_GPIO3VBATR		181
+#define AB8540_INT_GPIO4VBATF		182
+#define AB8540_INT_GPIO4VBATR		183
+/* ab8540_irq_regoffset[23] -> IT[Source|Latch|Mask]29 */
+#define AB8540_INT_SYSCLKREQ2F		184
+#define AB8540_INT_SYSCLKREQ2R		185
+#define AB8540_INT_SYSCLKREQ3F		186
+#define AB8540_INT_SYSCLKREQ3R		187
+#define AB8540_INT_SYSCLKREQ4F		188
+#define AB8540_INT_SYSCLKREQ4R		189
+#define AB8540_INT_SYSCLKREQ5F		190
+#define AB8540_INT_SYSCLKREQ5R		191
+/* ab8540_irq_regoffset[24] -> IT[Source|Latch|Mask]30 */
+#define AB8540_INT_PWMOUT1F		192
+#define AB8540_INT_PWMOUT1R		193
+#define AB8540_INT_PWMCTRL0F		194
+#define AB8540_INT_PWMCTRL0R		195
+#define AB8540_INT_PWMCTRL1F		196
+#define AB8540_INT_PWMCTRL1R		197
+#define AB8540_INT_SYSCLKREQ6F		198
+#define AB8540_INT_SYSCLKREQ6R		199
+/* ab8540_irq_regoffset[25] -> IT[Source|Latch|Mask]31 */
+#define AB8540_INT_PWMEXTVIBRA1F	200
+#define AB8540_INT_PWMEXTVIBRA1R	201
+#define AB8540_INT_PWMEXTVIBRA2F	202
+#define AB8540_INT_PWMEXTVIBRA2R	203
+#define AB8540_INT_PWMOUT2F		204
+#define AB8540_INT_PWMOUT2R		205
+#define AB8540_INT_PWMOUT3F		206
+#define AB8540_INT_PWMOUT3R		207
+/* ab8540_irq_regoffset[26] -> IT[Source|Latch|Mask]32 */
+#define AB8540_INT_ADDATA2F		208
+#define AB8540_INT_ADDATA2R		209
+#define AB8540_INT_DADATA2F		210
+#define AB8540_INT_DADATA2R		211
+#define AB8540_INT_FSYNC2F		212
+#define AB8540_INT_FSYNC2R		213
+#define AB8540_INT_BITCLK2F		214
+#define AB8540_INT_BITCLK2R		215
 
 /*
  * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
@@ -213,13 +300,24 @@ enum ab8500_version {
  * which is larger.
  */
 #define AB8500_NR_IRQS			112
-#define AB8505_NR_IRQS			136
-#define AB9540_NR_IRQS			136
+#define AB8505_NR_IRQS			153
+#define AB9540_NR_IRQS			153
+#define AB8540_NR_IRQS			216
 /* This is set to the roof of any AB8500 chip variant IRQ counts */
-#define AB8500_MAX_NR_IRQS		AB9540_NR_IRQS
+#define AB8500_MAX_NR_IRQS		AB8540_NR_IRQS
 
 #define AB8500_NUM_IRQ_REGS		14
-#define AB9540_NUM_IRQ_REGS		17
+#define AB9540_NUM_IRQ_REGS		20
+#define AB8540_NUM_IRQ_REGS		27
+
+/* Turn On Status Event */
+#define AB8500_POR_ON_VBAT		0x01
+#define AB8500_POW_KEY_1_ON		0x02
+#define AB8500_POW_KEY_2_ON		0x04
+#define AB8500_RTC_ALARM		0x08
+#define AB8500_MAIN_CH_DET		0x10
+#define AB8500_VBUS_DET			0x20
+#define AB8500_USB_ID_DET		0x40
 
 /**
  * struct ab8500 - ab8500 internal structure
@@ -287,7 +385,7 @@ struct ab8500_platform_data {
 	struct ab8500_regulator_reg_init *regulator_reg_init;
 	int num_regulator;
 	struct regulator_init_data *regulator;
-	struct ab8500_gpio_platform_data *gpio;
+	struct abx500_gpio_platform_data *gpio;
 	struct ab8500_codec_platform_data *codec;
 };
 
@@ -335,10 +433,79 @@ static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab)
 	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0));
 }
 
+static inline int is_ab8500_3p3_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT3P3));
+}
+
 /* exclude also ab8505, ab9540... */
 static inline int is_ab8500_2p0(struct ab8500 *ab)
 {
 	return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0));
 }
 
+static inline int is_ab8505_1p0_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab8505(ab) && (ab->chip_id <= AB8500_CUT1P0));
+}
+
+static inline int is_ab8505_2p0(struct ab8500 *ab)
+{
+	return (is_ab8505(ab) && (ab->chip_id == AB8500_CUT2P0));
+}
+
+static inline int is_ab9540_1p0_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab9540(ab) && (ab->chip_id <= AB8500_CUT1P0));
+}
+
+static inline int is_ab9540_2p0(struct ab8500 *ab)
+{
+	return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT2P0));
+}
+
+/*
+ * Be careful, the marketing name for this chip is 2.1
+ * but the value read from the chip is 3.0 (0x30)
+ */
+static inline int is_ab9540_3p0(struct ab8500 *ab)
+{
+	return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT3P0));
+}
+
+static inline int is_ab8540_1p0_or_earlier(struct ab8500 *ab)
+{
+	return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P0);
+}
+
+static inline int is_ab8540_1p1_or_earlier(struct ab8500 *ab)
+{
+	return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P1);
+}
+
+static inline int is_ab8540_1p2_or_earlier(struct ab8500 *ab)
+{
+	return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P2);
+}
+
+static inline int is_ab8540_2p0_or_earlier(struct ab8500 *ab)
+{
+	return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT2P0);
+}
+
+static inline int is_ab8540_2p0(struct ab8500 *ab)
+{
+	return is_ab8540(ab) && (ab->chip_id == AB8500_CUT2P0);
+}
+
+static inline int is_ab8505_2p0_earlier(struct ab8500 *ab)
+{
+	return (is_ab8505(ab) && (ab->chip_id < AB8500_CUT2P0));
+}
+
+static inline int is_ab9540_2p0_or_earlier(struct ab8500 *ab)
+{
+	return (is_ab9540(ab) && (ab->chip_id < AB8500_CUT2P0));
+}
+
 #endif /* MFD_AB8500_H */
diff --git a/include/linux/pinctrl/devinfo.h b/include/linux/pinctrl/devinfo.h
new file mode 100644
index 000000000000..6e5f8a985ea7
--- /dev/null
+++ b/include/linux/pinctrl/devinfo.h
@@ -0,0 +1,45 @@
+/*
+ * Per-device information from the pin control system.
+ * This is the stuff that get included into the device
+ * core.
+ *
+ * Copyright (C) 2012 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ * This interface is used in the core to keep track of pins.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef PINCTRL_DEVINFO_H
+#define PINCTRL_DEVINFO_H
+
+#ifdef CONFIG_PINCTRL
+
+/* The device core acts as a consumer toward pinctrl */
+#include <linux/pinctrl/consumer.h>
+
+/**
+ * struct dev_pin_info - pin state container for devices
+ * @p: pinctrl handle for the containing device
+ * @default_state: the default state for the handle, if found
+ */
+struct dev_pin_info {
+	struct pinctrl *p;
+	struct pinctrl_state *default_state;
+};
+
+extern int pinctrl_bind_pins(struct device *dev);
+
+#else
+
+/* Stubs if we're not using pinctrl */
+
+static inline int pinctrl_bind_pins(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PINCTRL */
+#endif /* PINCTRL_DEVINFO_H */
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 47a1bdd88878..72474e18f1e0 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -46,7 +46,11 @@
  * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
  *	(open emitter). Sending this config will enabale open drain mode, the
  *	argument is ignored.
- * @PIN_CONFIG_INPUT_SCHMITT_DISABLE: disable schmitt-trigger mode on the pin.
+ * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as
+ * 	argument. The argument is in mA.
+ * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin.
+ *      If the argument != 0, schmitt-trigger mode is enabled. If it's 0,
+ *      schmitt-trigger mode is disabled.
  * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in
  *	schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis,
  *	the threshold value is given on a custom format as argument when
@@ -58,10 +62,15 @@
  * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
  *	supplies, the argument to this parameter (on a custom format) tells
  *	the driver which alternative power source to use.
+ * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to
+ * 	this parameter (on a custom format) tells the driver which alternative
+ * 	slew rate to use.
  * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power
  *	operation, if several modes of operation are supported these can be
  *	passed in the argument on a custom form, else just use argument 1
  *	to indicate low power mode, argument 0 turns low power mode off.
+ * @PIN_CONFIG_OUTPUT: this will configure the pin in output, use argument
+ *	1 to indicate high level, argument 0 to indicate low level.
  * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if
  *	you need to pass in custom configurations to the pin controller, use
  *	PIN_CONFIG_END+1 as the base offset.
@@ -74,11 +83,14 @@ enum pin_config_param {
 	PIN_CONFIG_DRIVE_PUSH_PULL,
 	PIN_CONFIG_DRIVE_OPEN_DRAIN,
 	PIN_CONFIG_DRIVE_OPEN_SOURCE,
-	PIN_CONFIG_INPUT_SCHMITT_DISABLE,
+	PIN_CONFIG_DRIVE_STRENGTH,
+	PIN_CONFIG_INPUT_SCHMITT_ENABLE,
 	PIN_CONFIG_INPUT_SCHMITT,
 	PIN_CONFIG_INPUT_DEBOUNCE,
 	PIN_CONFIG_POWER_SOURCE,
+	PIN_CONFIG_SLEW_RATE,
 	PIN_CONFIG_LOW_POWER_MODE,
+	PIN_CONFIG_OUTPUT,
 	PIN_CONFIG_END = 0x7FFF,
 };
 
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 04d6700d99af..778804df293f 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -154,6 +154,7 @@ struct pinctrl_dev *of_pinctrl_get(struct device_node *np)
 #endif /* CONFIG_OF */
 
 extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
+extern const char *pinctrl_dev_get_devname(struct pinctrl_dev *pctldev);
 extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
 #else