Merge tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here is the big set of Staging/IIO driver patches for 4.17-rc1.

  It is a lot, over 500 changes, but not huge by previous kernel release
  standards. We deleted more lines than we added again (27k added vs.
  91k remvoed), thanks to finally being able to delete the IRDA drivers
  and networking code.

  We also deleted the ccree crypto driver, but that's coming back in
  through the crypto tree to you, in a much cleaned-up form.

  Added this round is at lot of "mt7621" device support, which is for an
  embedded device that Neil Brown cares about, and of course a handful
  of new IIO drivers as well.

  And finally, the fsl-mc core code moved out of the staging tree to the
  "real" part of the kernel, which is nice to see happen as well.

  Full details are in the shortlog, which has all of the tiny cleanup
  patches described.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (579 commits)
  staging: rtl8723bs: Remove yield call, replace with cond_resched()
  staging: rtl8723bs: Replace yield() call with cond_resched()
  staging: rtl8723bs: Remove unecessary newlines from 'odm.h'.
  staging: rtl8723bs: Rework 'struct _ODM_Phy_Status_Info_' coding style.
  staging: rtl8723bs: Rework 'struct _ODM_Per_Pkt_Info_' coding style.
  staging: rtl8723bs: Replace NULL pointer comparison with '!'.
  staging: rtl8723bs: Factor out rtl8723bs_recv_tasklet() sections.
  staging: rtl8723bs: Fix function signature that goes over 80 characters.
  staging: rtl8723bs: Fix lines too long in update_recvframe_attrib().
  staging: rtl8723bs: Remove unnecessary blank lines in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Change camel case to snake case in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Add missing braces in else statement.
  staging: rtl8723bs: Add spaces around ternary operators.
  staging: rtl8723bs: Fix lines with trailing open parentheses.
  staging: rtl8723bs: Remove unnecessary length #define's.
  staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants.
  staging: rtl8723bs: Fix alignment in rtw_wx_set_auth().
  staging: rtl8723bs: Remove braces from single statement conditionals.
  staging: rtl8723bs: Remove unecessary braces from switch statement.
  staging: rtl8723bs: Fix newlines in rtw_wx_set_auth().
  ...

7 files changed, 687 insertions, 1236 deletions

diff --git a/include/linux/fsl/mc.h b/include/linux/fsl/mc.h
new file mode 100644
index 000000000000..f27cb14088a4
--- /dev/null
+++ b/include/linux/fsl/mc.h
@@ -0,0 +1,562 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Freescale Management Complex (MC) bus public interface
+ *
+ * Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
+ * Author: German Rivera <German.Rivera@freescale.com>
+ *
+ */
+#ifndef _FSL_MC_H_
+#define _FSL_MC_H_
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/interrupt.h>
+
+#define FSL_MC_VENDOR_FREESCALE	0x1957
+
+struct irq_domain;
+struct msi_domain_info;
+
+struct fsl_mc_device;
+struct fsl_mc_io;
+
+/**
+ * struct fsl_mc_driver - MC object device driver object
+ * @driver: Generic device driver
+ * @match_id_table: table of supported device matching Ids
+ * @probe: Function called when a device is added
+ * @remove: Function called when a device is removed
+ * @shutdown: Function called at shutdown time to quiesce the device
+ * @suspend: Function called when a device is stopped
+ * @resume: Function called when a device is resumed
+ *
+ * Generic DPAA device driver object for device drivers that are registered
+ * with a DPRC bus. This structure is to be embedded in each device-specific
+ * driver structure.
+ */
+struct fsl_mc_driver {
+	struct device_driver driver;
+	const struct fsl_mc_device_id *match_id_table;
+	int (*probe)(struct fsl_mc_device *dev);
+	int (*remove)(struct fsl_mc_device *dev);
+	void (*shutdown)(struct fsl_mc_device *dev);
+	int (*suspend)(struct fsl_mc_device *dev, pm_message_t state);
+	int (*resume)(struct fsl_mc_device *dev);
+};
+
+#define to_fsl_mc_driver(_drv) \
+	container_of(_drv, struct fsl_mc_driver, driver)
+
+/**
+ * enum fsl_mc_pool_type - Types of allocatable MC bus resources
+ *
+ * Entries in these enum are used as indices in the array of resource
+ * pools of an fsl_mc_bus object.
+ */
+enum fsl_mc_pool_type {
+	FSL_MC_POOL_DPMCP = 0x0,    /* corresponds to "dpmcp" in the MC */
+	FSL_MC_POOL_DPBP,	    /* corresponds to "dpbp" in the MC */
+	FSL_MC_POOL_DPCON,	    /* corresponds to "dpcon" in the MC */
+	FSL_MC_POOL_IRQ,
+
+	/*
+	 * NOTE: New resource pool types must be added before this entry
+	 */
+	FSL_MC_NUM_POOL_TYPES
+};
+
+/**
+ * struct fsl_mc_resource - MC generic resource
+ * @type: type of resource
+ * @id: unique MC resource Id within the resources of the same type
+ * @data: pointer to resource-specific data if the resource is currently
+ * allocated, or NULL if the resource is not currently allocated.
+ * @parent_pool: pointer to the parent resource pool from which this
+ * resource is allocated from.
+ * @node: Node in the free list of the corresponding resource pool
+ *
+ * NOTE: This structure is to be embedded as a field of specific
+ * MC resource structures.
+ */
+struct fsl_mc_resource {
+	enum fsl_mc_pool_type type;
+	s32 id;
+	void *data;
+	struct fsl_mc_resource_pool *parent_pool;
+	struct list_head node;
+};
+
+/**
+ * struct fsl_mc_device_irq - MC object device message-based interrupt
+ * @msi_desc: pointer to MSI descriptor allocated by fsl_mc_msi_alloc_descs()
+ * @mc_dev: MC object device that owns this interrupt
+ * @dev_irq_index: device-relative IRQ index
+ * @resource: MC generic resource associated with the interrupt
+ */
+struct fsl_mc_device_irq {
+	struct msi_desc *msi_desc;
+	struct fsl_mc_device *mc_dev;
+	u8 dev_irq_index;
+	struct fsl_mc_resource resource;
+};
+
+#define to_fsl_mc_irq(_mc_resource) \
+	container_of(_mc_resource, struct fsl_mc_device_irq, resource)
+
+/* Opened state - Indicates that an object is open by at least one owner */
+#define FSL_MC_OBJ_STATE_OPEN		0x00000001
+/* Plugged state - Indicates that the object is plugged */
+#define FSL_MC_OBJ_STATE_PLUGGED	0x00000002
+
+/**
+ * Shareability flag - Object flag indicating no memory shareability.
+ * the object generates memory accesses that are non coherent with other
+ * masters;
+ * user is responsible for proper memory handling through IOMMU configuration.
+ */
+#define FSL_MC_OBJ_FLAG_NO_MEM_SHAREABILITY	0x0001
+
+/**
+ * struct fsl_mc_obj_desc - Object descriptor
+ * @type: Type of object: NULL terminated string
+ * @id: ID of logical object resource
+ * @vendor: Object vendor identifier
+ * @ver_major: Major version number
+ * @ver_minor:  Minor version number
+ * @irq_count: Number of interrupts supported by the object
+ * @region_count: Number of mappable regions supported by the object
+ * @state: Object state: combination of FSL_MC_OBJ_STATE_ states
+ * @label: Object label: NULL terminated string
+ * @flags: Object's flags
+ */
+struct fsl_mc_obj_desc {
+	char type[16];
+	int id;
+	u16 vendor;
+	u16 ver_major;
+	u16 ver_minor;
+	u8 irq_count;
+	u8 region_count;
+	u32 state;
+	char label[16];
+	u16 flags;
+};
+
+/**
+ * Bit masks for a MC object device (struct fsl_mc_device) flags
+ */
+#define FSL_MC_IS_DPRC	0x0001
+
+/**
+ * struct fsl_mc_device - MC object device object
+ * @dev: Linux driver model device object
+ * @dma_mask: Default DMA mask
+ * @flags: MC object device flags
+ * @icid: Isolation context ID for the device
+ * @mc_handle: MC handle for the corresponding MC object opened
+ * @mc_io: Pointer to MC IO object assigned to this device or
+ * NULL if none.
+ * @obj_desc: MC description of the DPAA device
+ * @regions: pointer to array of MMIO region entries
+ * @irqs: pointer to array of pointers to interrupts allocated to this device
+ * @resource: generic resource associated with this MC object device, if any.
+ *
+ * Generic device object for MC object devices that are "attached" to a
+ * MC bus.
+ *
+ * NOTES:
+ * - For a non-DPRC object its icid is the same as its parent DPRC's icid.
+ * - The SMMU notifier callback gets invoked after device_add() has been
+ *   called for an MC object device, but before the device-specific probe
+ *   callback gets called.
+ * - DP_OBJ_DPRC objects are the only MC objects that have built-in MC
+ *   portals. For all other MC objects, their device drivers are responsible for
+ *   allocating MC portals for them by calling fsl_mc_portal_allocate().
+ * - Some types of MC objects (e.g., DP_OBJ_DPBP, DP_OBJ_DPCON) are
+ *   treated as resources that can be allocated/deallocated from the
+ *   corresponding resource pool in the object's parent DPRC, using the
+ *   fsl_mc_object_allocate()/fsl_mc_object_free() functions. These MC objects
+ *   are known as "allocatable" objects. For them, the corresponding
+ *   fsl_mc_device's 'resource' points to the associated resource object.
+ *   For MC objects that are not allocatable (e.g., DP_OBJ_DPRC, DP_OBJ_DPNI),
+ *   'resource' is NULL.
+ */
+struct fsl_mc_device {
+	struct device dev;
+	u64 dma_mask;
+	u16 flags;
+	u16 icid;
+	u16 mc_handle;
+	struct fsl_mc_io *mc_io;
+	struct fsl_mc_obj_desc obj_desc;
+	struct resource *regions;
+	struct fsl_mc_device_irq **irqs;
+	struct fsl_mc_resource *resource;
+};
+
+#define to_fsl_mc_device(_dev) \
+	container_of(_dev, struct fsl_mc_device, dev)
+
+#define MC_CMD_NUM_OF_PARAMS	7
+
+struct mc_cmd_header {
+	u8 src_id;
+	u8 flags_hw;
+	u8 status;
+	u8 flags_sw;
+	__le16 token;
+	__le16 cmd_id;
+};
+
+struct fsl_mc_command {
+	u64 header;
+	u64 params[MC_CMD_NUM_OF_PARAMS];
+};
+
+enum mc_cmd_status {
+	MC_CMD_STATUS_OK = 0x0, /* Completed successfully */
+	MC_CMD_STATUS_READY = 0x1, /* Ready to be processed */
+	MC_CMD_STATUS_AUTH_ERR = 0x3, /* Authentication error */
+	MC_CMD_STATUS_NO_PRIVILEGE = 0x4, /* No privilege */
+	MC_CMD_STATUS_DMA_ERR = 0x5, /* DMA or I/O error */
+	MC_CMD_STATUS_CONFIG_ERR = 0x6, /* Configuration error */
+	MC_CMD_STATUS_TIMEOUT = 0x7, /* Operation timed out */
+	MC_CMD_STATUS_NO_RESOURCE = 0x8, /* No resources */
+	MC_CMD_STATUS_NO_MEMORY = 0x9, /* No memory available */
+	MC_CMD_STATUS_BUSY = 0xA, /* Device is busy */
+	MC_CMD_STATUS_UNSUPPORTED_OP = 0xB, /* Unsupported operation */
+	MC_CMD_STATUS_INVALID_STATE = 0xC /* Invalid state */
+};
+
+/*
+ * MC command flags
+ */
+
+/* High priority flag */
+#define MC_CMD_FLAG_PRI		0x80
+/* Command completion flag */
+#define MC_CMD_FLAG_INTR_DIS	0x01
+
+static inline u64 mc_encode_cmd_header(u16 cmd_id,
+				       u32 cmd_flags,
+				       u16 token)
+{
+	u64 header = 0;
+	struct mc_cmd_header *hdr = (struct mc_cmd_header *)&header;
+
+	hdr->cmd_id = cpu_to_le16(cmd_id);
+	hdr->token  = cpu_to_le16(token);
+	hdr->status = MC_CMD_STATUS_READY;
+	if (cmd_flags & MC_CMD_FLAG_PRI)
+		hdr->flags_hw = MC_CMD_FLAG_PRI;
+	if (cmd_flags & MC_CMD_FLAG_INTR_DIS)
+		hdr->flags_sw = MC_CMD_FLAG_INTR_DIS;
+
+	return header;
+}
+
+static inline u16 mc_cmd_hdr_read_token(struct fsl_mc_command *cmd)
+{
+	struct mc_cmd_header *hdr = (struct mc_cmd_header *)&cmd->header;
+	u16 token = le16_to_cpu(hdr->token);
+
+	return token;
+}
+
+struct mc_rsp_create {
+	__le32 object_id;
+};
+
+struct mc_rsp_api_ver {
+	__le16 major_ver;
+	__le16 minor_ver;
+};
+
+static inline u32 mc_cmd_read_object_id(struct fsl_mc_command *cmd)
+{
+	struct mc_rsp_create *rsp_params;
+
+	rsp_params = (struct mc_rsp_create *)cmd->params;
+	return le32_to_cpu(rsp_params->object_id);
+}
+
+static inline void mc_cmd_read_api_version(struct fsl_mc_command *cmd,
+					   u16 *major_ver,
+					   u16 *minor_ver)
+{
+	struct mc_rsp_api_ver *rsp_params;
+
+	rsp_params = (struct mc_rsp_api_ver *)cmd->params;
+	*major_ver = le16_to_cpu(rsp_params->major_ver);
+	*minor_ver = le16_to_cpu(rsp_params->minor_ver);
+}
+
+/**
+ * Bit masks for a MC I/O object (struct fsl_mc_io) flags
+ */
+#define FSL_MC_IO_ATOMIC_CONTEXT_PORTAL	0x0001
+
+/**
+ * struct fsl_mc_io - MC I/O object to be passed-in to mc_send_command()
+ * @dev: device associated with this Mc I/O object
+ * @flags: flags for mc_send_command()
+ * @portal_size: MC command portal size in bytes
+ * @portal_phys_addr: MC command portal physical address
+ * @portal_virt_addr: MC command portal virtual address
+ * @dpmcp_dev: pointer to the DPMCP device associated with the MC portal.
+ *
+ * Fields are only meaningful if the FSL_MC_IO_ATOMIC_CONTEXT_PORTAL flag is not
+ * set:
+ * @mutex: Mutex to serialize mc_send_command() calls that use the same MC
+ * portal, if the fsl_mc_io object was created with the
+ * FSL_MC_IO_ATOMIC_CONTEXT_PORTAL flag off. mc_send_command() calls for this
+ * fsl_mc_io object must be made only from non-atomic context.
+ *
+ * Fields are only meaningful if the FSL_MC_IO_ATOMIC_CONTEXT_PORTAL flag is
+ * set:
+ * @spinlock: Spinlock to serialize mc_send_command() calls that use the same MC
+ * portal, if the fsl_mc_io object was created with the
+ * FSL_MC_IO_ATOMIC_CONTEXT_PORTAL flag on. mc_send_command() calls for this
+ * fsl_mc_io object can be made from atomic or non-atomic context.
+ */
+struct fsl_mc_io {
+	struct device *dev;
+	u16 flags;
+	u32 portal_size;
+	phys_addr_t portal_phys_addr;
+	void __iomem *portal_virt_addr;
+	struct fsl_mc_device *dpmcp_dev;
+	union {
+		/*
+		 * This field is only meaningful if the
+		 * FSL_MC_IO_ATOMIC_CONTEXT_PORTAL flag is not set
+		 */
+		struct mutex mutex; /* serializes mc_send_command() */
+
+		/*
+		 * This field is only meaningful if the
+		 * FSL_MC_IO_ATOMIC_CONTEXT_PORTAL flag is set
+		 */
+		spinlock_t spinlock;	/* serializes mc_send_command() */
+	};
+};
+
+int mc_send_command(struct fsl_mc_io *mc_io, struct fsl_mc_command *cmd);
+
+#ifdef CONFIG_FSL_MC_BUS
+#define dev_is_fsl_mc(_dev) ((_dev)->bus == &fsl_mc_bus_type)
+#else
+/* If fsl-mc bus is not present device cannot belong to fsl-mc bus */
+#define dev_is_fsl_mc(_dev) (0)
+#endif
+
+/*
+ * module_fsl_mc_driver() - Helper macro for drivers that don't do
+ * anything special in module init/exit.  This eliminates a lot of
+ * boilerplate.  Each module may only use this macro once, and
+ * calling it replaces module_init() and module_exit()
+ */
+#define module_fsl_mc_driver(__fsl_mc_driver) \
+	module_driver(__fsl_mc_driver, fsl_mc_driver_register, \
+		      fsl_mc_driver_unregister)
+
+/*
+ * Macro to avoid include chaining to get THIS_MODULE
+ */
+#define fsl_mc_driver_register(drv) \
+	__fsl_mc_driver_register(drv, THIS_MODULE)
+
+int __must_check __fsl_mc_driver_register(struct fsl_mc_driver *fsl_mc_driver,
+					  struct module *owner);
+
+void fsl_mc_driver_unregister(struct fsl_mc_driver *driver);
+
+int __must_check fsl_mc_portal_allocate(struct fsl_mc_device *mc_dev,
+					u16 mc_io_flags,
+					struct fsl_mc_io **new_mc_io);
+
+void fsl_mc_portal_free(struct fsl_mc_io *mc_io);
+
+int fsl_mc_portal_reset(struct fsl_mc_io *mc_io);
+
+int __must_check fsl_mc_object_allocate(struct fsl_mc_device *mc_dev,
+					enum fsl_mc_pool_type pool_type,
+					struct fsl_mc_device **new_mc_adev);
+
+void fsl_mc_object_free(struct fsl_mc_device *mc_adev);
+
+struct irq_domain *fsl_mc_msi_create_irq_domain(struct fwnode_handle *fwnode,
+						struct msi_domain_info *info,
+						struct irq_domain *parent);
+
+int __must_check fsl_mc_allocate_irqs(struct fsl_mc_device *mc_dev);
+
+void fsl_mc_free_irqs(struct fsl_mc_device *mc_dev);
+
+extern struct bus_type fsl_mc_bus_type;
+
+extern struct device_type fsl_mc_bus_dprc_type;
+extern struct device_type fsl_mc_bus_dpni_type;
+extern struct device_type fsl_mc_bus_dpio_type;
+extern struct device_type fsl_mc_bus_dpsw_type;
+extern struct device_type fsl_mc_bus_dpbp_type;
+extern struct device_type fsl_mc_bus_dpcon_type;
+extern struct device_type fsl_mc_bus_dpmcp_type;
+extern struct device_type fsl_mc_bus_dpmac_type;
+extern struct device_type fsl_mc_bus_dprtc_type;
+
+static inline bool is_fsl_mc_bus_dprc(const struct fsl_mc_device *mc_dev)
+{
+	return mc_dev->dev.type == &fsl_mc_bus_dprc_type;
+}
+
+static inline bool is_fsl_mc_bus_dpni(const struct fsl_mc_device *mc_dev)
+{
+	return mc_dev->dev.type == &fsl_mc_bus_dpni_type;
+}
+
+static inline bool is_fsl_mc_bus_dpio(const struct fsl_mc_device *mc_dev)
+{
+	return mc_dev->dev.type == &fsl_mc_bus_dpio_type;
+}
+
+static inline bool is_fsl_mc_bus_dpsw(const struct fsl_mc_device *mc_dev)
+{
+	return mc_dev->dev.type == &fsl_mc_bus_dpsw_type;
+}
+
+static inline bool is_fsl_mc_bus_dpbp(const struct fsl_mc_device *mc_dev)
+{
+	return mc_dev->dev.type == &fsl_mc_bus_dpbp_type;
+}
+
+static inline bool is_fsl_mc_bus_dpcon(const struct fsl_mc_device *mc_dev)
+{
+	return mc_dev->dev.type == &fsl_mc_bus_dpcon_type;
+}
+
+static inline bool is_fsl_mc_bus_dpmcp(const struct fsl_mc_device *mc_dev)
+{
+	return mc_dev->dev.type == &fsl_mc_bus_dpmcp_type;
+}
+
+static inline bool is_fsl_mc_bus_dpmac(const struct fsl_mc_device *mc_dev)
+{
+	return mc_dev->dev.type == &fsl_mc_bus_dpmac_type;
+}
+
+static inline bool is_fsl_mc_bus_dprtc(const struct fsl_mc_device *mc_dev)
+{
+	return mc_dev->dev.type == &fsl_mc_bus_dprtc_type;
+}
+
+/*
+ * Data Path Buffer Pool (DPBP) API
+ * Contains initialization APIs and runtime control APIs for DPBP
+ */
+
+int dpbp_open(struct fsl_mc_io *mc_io,
+	      u32 cmd_flags,
+	      int dpbp_id,
+	      u16 *token);
+
+int dpbp_close(struct fsl_mc_io *mc_io,
+	       u32 cmd_flags,
+	       u16 token);
+
+int dpbp_enable(struct fsl_mc_io *mc_io,
+		u32 cmd_flags,
+		u16 token);
+
+int dpbp_disable(struct fsl_mc_io *mc_io,
+		 u32 cmd_flags,
+		 u16 token);
+
+int dpbp_reset(struct fsl_mc_io *mc_io,
+	       u32 cmd_flags,
+	       u16 token);
+
+/**
+ * struct dpbp_attr - Structure representing DPBP attributes
+ * @id:		DPBP object ID
+ * @bpid:	Hardware buffer pool ID; should be used as an argument in
+ *		acquire/release operations on buffers
+ */
+struct dpbp_attr {
+	int id;
+	u16 bpid;
+};
+
+int dpbp_get_attributes(struct fsl_mc_io *mc_io,
+			u32 cmd_flags,
+			u16 token,
+			struct dpbp_attr *attr);
+
+/* Data Path Concentrator (DPCON) API
+ * Contains initialization APIs and runtime control APIs for DPCON
+ */
+
+/**
+ * Use it to disable notifications; see dpcon_set_notification()
+ */
+#define DPCON_INVALID_DPIO_ID		(int)(-1)
+
+int dpcon_open(struct fsl_mc_io *mc_io,
+	       u32 cmd_flags,
+	       int dpcon_id,
+	       u16 *token);
+
+int dpcon_close(struct fsl_mc_io *mc_io,
+		u32 cmd_flags,
+		u16 token);
+
+int dpcon_enable(struct fsl_mc_io *mc_io,
+		 u32 cmd_flags,
+		 u16 token);
+
+int dpcon_disable(struct fsl_mc_io *mc_io,
+		  u32 cmd_flags,
+		  u16 token);
+
+int dpcon_reset(struct fsl_mc_io *mc_io,
+		u32 cmd_flags,
+		u16 token);
+
+/**
+ * struct dpcon_attr - Structure representing DPCON attributes
+ * @id: DPCON object ID
+ * @qbman_ch_id: Channel ID to be used by dequeue operation
+ * @num_priorities: Number of priorities for the DPCON channel (1-8)
+ */
+struct dpcon_attr {
+	int id;
+	u16 qbman_ch_id;
+	u8 num_priorities;
+};
+
+int dpcon_get_attributes(struct fsl_mc_io *mc_io,
+			 u32 cmd_flags,
+			 u16 token,
+			 struct dpcon_attr *attr);
+
+/**
+ * struct dpcon_notification_cfg - Structure representing notification params
+ * @dpio_id:	DPIO object ID; must be configured with a notification channel;
+ *	to disable notifications set it to 'DPCON_INVALID_DPIO_ID';
+ * @priority:	Priority selection within the DPIO channel; valid values
+ *		are 0-7, depending on the number of priorities in that channel
+ * @user_ctx:	User context value provided with each CDAN message
+ */
+struct dpcon_notification_cfg {
+	int dpio_id;
+	u8 priority;
+	u64 user_ctx;
+};
+
+int dpcon_set_notification(struct fsl_mc_io *mc_io,
+			   u32 cmd_flags,
+			   u16 token,
+			   struct dpcon_notification_cfg *cfg);
+
+#endif /* _FSL_MC_H_ */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 293fa0677fba..3cbf3cfff4f0 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -480,6 +480,15 @@ extern int func_ptr_is_kernel_text(void *ptr);
 
 unsigned long int_sqrt(unsigned long);
 
+#if BITS_PER_LONG < 64
+u32 int_sqrt64(u64 x);
+#else
+static inline u32 int_sqrt64(u64 x)
+{
+	return (u32)int_sqrt(x);
+}
+#endif
+
 extern void bust_spinlocks(int yes);
 extern int oops_in_progress;		/* If set, an oops, panic(), BUG() or die() is in progress */
 extern int panic_timeout;
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 080798f17ece..82bf7747b312 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -266,6 +266,8 @@ enum axp20x_variants {
 #define AXP288_RT_BATT_V_H		0xa0
 #define AXP288_RT_BATT_V_L		0xa1
 
+#define AXP813_ADC_RATE			0x85
+
 /* Fuel Gauge */
 #define AXP288_FG_RDC1_REG          0xba
 #define AXP288_FG_RDC0_REG          0xbb
diff --git a/include/linux/wait.h b/include/linux/wait.h
index 55a611486bac..d9f131ecf708 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -599,6 +599,120 @@ do {										\
 	__ret;									\
 })
 
+/**
+ * wait_event_idle - wait for a condition without contributing to system load
+ * @wq_head: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_IDLE) until the
+ * @condition evaluates to true.
+ * The @condition is checked each time the waitqueue @wq_head is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ */
+#define wait_event_idle(wq_head, condition)					\
+do {										\
+	might_sleep();								\
+	if (!(condition))							\
+		___wait_event(wq_head, condition, TASK_IDLE, 0, 0, schedule());	\
+} while (0)
+
+/**
+ * wait_event_idle_exclusive - wait for a condition with contributing to system load
+ * @wq_head: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_IDLE) until the
+ * @condition evaluates to true.
+ * The @condition is checked each time the waitqueue @wq_head is woken up.
+ *
+ * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
+ * set thus if other processes wait on the same list, when this
+ * process is woken further processes are not considered.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ */
+#define wait_event_idle_exclusive(wq_head, condition)				\
+do {										\
+	might_sleep();								\
+	if (!(condition))							\
+		___wait_event(wq_head, condition, TASK_IDLE, 1, 0, schedule());	\
+} while (0)
+
+#define __wait_event_idle_timeout(wq_head, condition, timeout)			\
+	___wait_event(wq_head, ___wait_cond_timeout(condition),			\
+		      TASK_IDLE, 0, timeout,					\
+		      __ret = schedule_timeout(__ret))
+
+/**
+ * wait_event_idle_timeout - sleep without load until a condition becomes true or a timeout elapses
+ * @wq_head: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ * @timeout: timeout, in jiffies
+ *
+ * The process is put to sleep (TASK_IDLE) until the
+ * @condition evaluates to true. The @condition is checked each time
+ * the waitqueue @wq_head is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * Returns:
+ * 0 if the @condition evaluated to %false after the @timeout elapsed,
+ * 1 if the @condition evaluated to %true after the @timeout elapsed,
+ * or the remaining jiffies (at least 1) if the @condition evaluated
+ * to %true before the @timeout elapsed.
+ */
+#define wait_event_idle_timeout(wq_head, condition, timeout)			\
+({										\
+	long __ret = timeout;							\
+	might_sleep();								\
+	if (!___wait_cond_timeout(condition))					\
+		__ret = __wait_event_idle_timeout(wq_head, condition, timeout);	\
+	__ret;									\
+})
+
+#define __wait_event_idle_exclusive_timeout(wq_head, condition, timeout)	\
+	___wait_event(wq_head, ___wait_cond_timeout(condition),			\
+		      TASK_IDLE, 1, timeout,					\
+		      __ret = schedule_timeout(__ret))
+
+/**
+ * wait_event_idle_exclusive_timeout - sleep without load until a condition becomes true or a timeout elapses
+ * @wq_head: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ * @timeout: timeout, in jiffies
+ *
+ * The process is put to sleep (TASK_IDLE) until the
+ * @condition evaluates to true. The @condition is checked each time
+ * the waitqueue @wq_head is woken up.
+ *
+ * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
+ * set thus if other processes wait on the same list, when this
+ * process is woken further processes are not considered.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ *
+ * Returns:
+ * 0 if the @condition evaluated to %false after the @timeout elapsed,
+ * 1 if the @condition evaluated to %true after the @timeout elapsed,
+ * or the remaining jiffies (at least 1) if the @condition evaluated
+ * to %true before the @timeout elapsed.
+ */
+#define wait_event_idle_exclusive_timeout(wq_head, condition, timeout)		\
+({										\
+	long __ret = timeout;							\
+	might_sleep();								\
+	if (!___wait_cond_timeout(condition))					\
+		__ret = __wait_event_idle_exclusive_timeout(wq_head, condition, timeout);\
+	__ret;									\
+})
+
 extern int do_wait_intr(wait_queue_head_t *, wait_queue_entry_t *);
 extern int do_wait_intr_irq(wait_queue_head_t *, wait_queue_entry_t *);
 
diff --git a/include/uapi/linux/irda.h b/include/uapi/linux/irda.h
deleted file mode 100644
index 2105c266aa6e..000000000000
--- a/include/uapi/linux/irda.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-/*********************************************************************
- *                
- * Filename:      irda.h
- * Version:       
- * Description:   
- * Status:        Experimental.
- * Author:        Dag Brattli <dagb@cs.uit.no>
- * Created at:    Mon Mar  8 14:06:12 1999
- * Modified at:   Sat Dec 25 16:06:42 1999
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- *     Neither Dag Brattli nor University of Tromsø admit liability nor
- *     provide warranty for any of this software. This material is 
- *     provided "AS-IS" and at no charge.
- *
- ********************************************************************/
-
-#ifndef KERNEL_IRDA_H
-#define KERNEL_IRDA_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Note that this file is shared with user space. */
-
-/* Hint bit positions for first hint byte */
-#define HINT_PNP         0x01
-#define HINT_PDA         0x02
-#define HINT_COMPUTER    0x04
-#define HINT_PRINTER     0x08
-#define HINT_MODEM       0x10
-#define HINT_FAX         0x20
-#define HINT_LAN         0x40
-#define HINT_EXTENSION   0x80
-
-/* Hint bit positions for second hint byte (first extension byte) */
-#define HINT_TELEPHONY   0x01
-#define HINT_FILE_SERVER 0x02
-#define HINT_COMM        0x04
-#define HINT_MESSAGE     0x08
-#define HINT_HTTP        0x10
-#define HINT_OBEX        0x20
-
-/* IrLMP character code values */
-#define CS_ASCII         0x00
-#define	CS_ISO_8859_1    0x01
-#define	CS_ISO_8859_2    0x02
-#define	CS_ISO_8859_3    0x03
-#define	CS_ISO_8859_4    0x04
-#define	CS_ISO_8859_5    0x05
-#define	CS_ISO_8859_6    0x06
-#define	CS_ISO_8859_7    0x07
-#define	CS_ISO_8859_8    0x08
-#define	CS_ISO_8859_9    0x09
-#define CS_UNICODE       0xff
-
-/* These are the currently known dongles */
-typedef enum {
-	IRDA_TEKRAM_DONGLE       = 0,
-	IRDA_ESI_DONGLE          = 1,
-	IRDA_ACTISYS_DONGLE      = 2,
-	IRDA_ACTISYS_PLUS_DONGLE = 3,
-	IRDA_GIRBIL_DONGLE       = 4,
-	IRDA_LITELINK_DONGLE     = 5,
-	IRDA_AIRPORT_DONGLE      = 6,
-	IRDA_OLD_BELKIN_DONGLE   = 7,
-	IRDA_EP7211_IR           = 8,
-	IRDA_MCP2120_DONGLE      = 9,
-	IRDA_ACT200L_DONGLE      = 10,
-	IRDA_MA600_DONGLE        = 11,
-	IRDA_TOIM3232_DONGLE     = 12,
-	IRDA_EP7211_DONGLE       = 13,
-} IRDA_DONGLE;
-
-/* Protocol types to be used for SOCK_DGRAM */
-enum {
-	IRDAPROTO_UNITDATA = 0,
-	IRDAPROTO_ULTRA    = 1,
-	IRDAPROTO_MAX
-};
-
-#define SOL_IRLMP      266 /* Same as SOL_IRDA for now */
-#define SOL_IRTTP      266 /* Same as SOL_IRDA for now */
-
-#define IRLMP_ENUMDEVICES        1	/* Return discovery log */
-#define IRLMP_IAS_SET            2	/* Set an attribute in local IAS */
-#define IRLMP_IAS_QUERY          3	/* Query remote IAS for attribute */
-#define IRLMP_HINTS_SET          4	/* Set hint bits advertised */
-#define IRLMP_QOS_SET            5
-#define IRLMP_QOS_GET            6
-#define IRLMP_MAX_SDU_SIZE       7
-#define IRLMP_IAS_GET            8	/* Get an attribute from local IAS */
-#define IRLMP_IAS_DEL		 9	/* Remove attribute from local IAS */
-#define IRLMP_HINT_MASK_SET	10	/* Set discovery filter */
-#define IRLMP_WAITDEVICE	11	/* Wait for a new discovery */
-
-#define IRTTP_MAX_SDU_SIZE IRLMP_MAX_SDU_SIZE /* Compatibility */
-
-#define IAS_MAX_STRING         256	/* See IrLMP 1.1, 4.3.3.2 */
-#define IAS_MAX_OCTET_STRING  1024	/* See IrLMP 1.1, 4.3.3.2 */
-#define IAS_MAX_CLASSNAME       60	/* See IrLMP 1.1, 4.3.1 */
-#define IAS_MAX_ATTRIBNAME      60	/* See IrLMP 1.1, 4.3.3.1 */
-#define IAS_MAX_ATTRIBNUMBER   256	/* See IrLMP 1.1, 4.3.3.1 */
-/* For user space backward compatibility - may be fixed in kernel 2.5.X
- * Note : need 60+1 ('\0'), make it 64 for alignement - Jean II */
-#define IAS_EXPORT_CLASSNAME       64
-#define IAS_EXPORT_ATTRIBNAME     256
-
-/* Attribute type needed for struct irda_ias_set */
-#define IAS_MISSING 0
-#define IAS_INTEGER 1
-#define IAS_OCT_SEQ 2
-#define IAS_STRING  3
-
-#define LSAP_ANY              0xff
-
-struct sockaddr_irda {
-	__kernel_sa_family_t sir_family; /* AF_IRDA */
-	__u8        sir_lsap_sel; /* LSAP selector */
-	__u32       sir_addr;     /* Device address */
-	char        sir_name[25]; /* Usually <service>:IrDA:TinyTP */
-};
-
-struct irda_device_info {
-	__u32       saddr;    /* Address of local interface */
-	__u32       daddr;    /* Address of remote device */
-	char        info[22]; /* Description */
-	__u8        charset;  /* Charset used for description */
-	__u8        hints[2]; /* Hint bits */
-};
-
-struct irda_device_list {
-       __u32 len;
-       struct irda_device_info dev[1];
-};
-
-struct irda_ias_set {
-	char irda_class_name[IAS_EXPORT_CLASSNAME];
-	char irda_attrib_name[IAS_EXPORT_ATTRIBNAME];
-	unsigned int irda_attrib_type;
-	union {
-		unsigned int irda_attrib_int;
-		struct {
-			unsigned short len;
-			__u8 octet_seq[IAS_MAX_OCTET_STRING];
-		} irda_attrib_octet_seq;
-		struct {
-			__u8 len;
-			__u8 charset;
-			__u8 string[IAS_MAX_STRING];
-		} irda_attrib_string;
-	} attribute;
-	__u32       daddr;    /* Address of device (for some queries only) */
-};
-
-/* Some private IOCTL's (max 16) */
-#define SIOCSDONGLE    (SIOCDEVPRIVATE + 0)
-#define SIOCGDONGLE    (SIOCDEVPRIVATE + 1)
-#define SIOCSBANDWIDTH (SIOCDEVPRIVATE + 2)
-#define SIOCSMEDIABUSY (SIOCDEVPRIVATE + 3)
-#define SIOCGMEDIABUSY (SIOCDEVPRIVATE + 4)
-#define SIOCGRECEIVING (SIOCDEVPRIVATE + 5)
-#define SIOCSMODE      (SIOCDEVPRIVATE + 6)
-#define SIOCGMODE      (SIOCDEVPRIVATE + 7)
-#define SIOCSDTRRTS    (SIOCDEVPRIVATE + 8)
-#define SIOCGQOS       (SIOCDEVPRIVATE + 9)
-
-/* No reason to include <linux/if.h> just because of this one ;-) */
-#define IRNAMSIZ 16 
-
-/* IrDA quality of service information (must not exceed 16 bytes) */
-struct if_irda_qos {
-	unsigned long  baudrate;
-	unsigned short data_size;
-	unsigned short window_size;
-	unsigned short min_turn_time;
-	unsigned short max_turn_time;
-	unsigned char  add_bofs;
-	unsigned char  link_disc;
-};
-
-/* For setting RTS and DTR lines of a dongle */
-struct if_irda_line {
-	__u8 dtr;
-	__u8 rts;
-};
-
-/* IrDA interface configuration (data part must not exceed 16 bytes) */
-struct if_irda_req {
-	union {
-		char ifrn_name[IRNAMSIZ];  /* if name, e.g. "irda0" */
-	} ifr_ifrn;
-	
-	/* Data part */
-	union {
-		struct if_irda_line ifru_line;
-		struct if_irda_qos  ifru_qos;
-		unsigned short      ifru_flags;
-		unsigned int        ifru_receiving;
-		unsigned int        ifru_mode;
-		unsigned int        ifru_dongle;
-	} ifr_ifru;
-};
-
-#define ifr_baudrate  ifr_ifru.ifru_qos.baudrate
-#define ifr_receiving ifr_ifru.ifru_receiving 
-#define ifr_dongle    ifr_ifru.ifru_dongle
-#define ifr_mode      ifr_ifru.ifru_mode
-#define ifr_dtr       ifr_ifru.ifru_line.dtr
-#define ifr_rts       ifr_ifru.ifru_line.rts
-
-
-/* IrDA netlink definitions */
-#define IRDA_NL_NAME "irda"
-#define IRDA_NL_VERSION 1
-
-enum irda_nl_commands {
-	IRDA_NL_CMD_UNSPEC,
-	IRDA_NL_CMD_SET_MODE,
-	IRDA_NL_CMD_GET_MODE,
-
-	__IRDA_NL_CMD_AFTER_LAST
-};
-#define IRDA_NL_CMD_MAX (__IRDA_NL_CMD_AFTER_LAST - 1)
-
-enum nl80211_attrs {
-	IRDA_NL_ATTR_UNSPEC,
-	IRDA_NL_ATTR_IFNAME,
-	IRDA_NL_ATTR_MODE,
-
-	__IRDA_NL_ATTR_AFTER_LAST
-};
-#define IRDA_NL_ATTR_MAX (__IRDA_NL_ATTR_AFTER_LAST - 1)
-
-/* IrDA modes */
-#define IRDA_MODE_PRIMARY   0x1
-#define IRDA_MODE_SECONDARY 0x2
-#define IRDA_MODE_MONITOR   0x4
-
-#endif /* KERNEL_IRDA_H */
-
-
-
-
diff --git a/include/uapi/linux/ixjuser.h b/include/uapi/linux/ixjuser.h
deleted file mode 100644
index ba245007cfe7..000000000000
--- a/include/uapi/linux/ixjuser.h
+++ /dev/null
@@ -1,721 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-#ifndef __LINUX_IXJUSER_H
-#define __LINUX_IXJUSER_H
-
-/******************************************************************************
- *
- *    ixjuser.h
- *
- * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
- * including the Internet PhoneJACK, Internet PhoneJACK Lite,
- * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
- * SmartCABLE
- *
- *    (c) Copyright 1999-2001  Quicknet Technologies, Inc.
- *
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License
- *    as published by the Free Software Foundation; either version
- *    2 of the License, or (at your option) any later version.
- *
- * Author:          Ed Okerson, <eokerson@quicknet.net>
- *    
- * Contributors:    Greg Herlein, <gherlein@quicknet.net>
- *                  David W. Erhart, <derhart@quicknet.net>
- *                  John Sellers, <jsellers@quicknet.net>
- *                  Mike Preston, <mpreston@quicknet.net>
- *
- * More information about the hardware related to this driver can be found
- * at our website:    http://www.quicknet.net
- *
- * Fixes:
- *
- * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
- * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION 
- * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- *****************************************************************************/
-
-#include <linux/telephony.h>
-
-
-/******************************************************************************
-*
-* IOCTL's used for the Quicknet Telephony Cards
-*
-* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
-* reset the SRAM values before further use.
-*
-******************************************************************************/
-
-#define IXJCTL_DSP_RESET 		_IO  ('q', 0xC0)
-
-#define IXJCTL_RING                     PHONE_RING
-#define IXJCTL_HOOKSTATE                PHONE_HOOKSTATE
-#define IXJCTL_MAXRINGS			PHONE_MAXRINGS
-#define IXJCTL_RING_CADENCE		PHONE_RING_CADENCE
-#define IXJCTL_RING_START		PHONE_RING_START
-#define IXJCTL_RING_STOP		PHONE_RING_STOP
-
-#define IXJCTL_CARDTYPE			_IOR ('q', 0xC1, int)
-#define IXJCTL_SERIAL			_IOR ('q', 0xC2, int)
-#define IXJCTL_DSP_TYPE                 _IOR ('q', 0xC3, int)
-#define IXJCTL_DSP_VERSION              _IOR ('q', 0xC4, int)
-#define IXJCTL_VERSION              	_IOR ('q', 0xDA, char *)
-#define IXJCTL_DSP_IDLE			_IO  ('q', 0xC5)
-#define IXJCTL_TESTRAM			_IO  ('q', 0xC6)
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the record settings of the DSP
-*
-* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
-* Setting a lower depth reduces latency, but increases the demand of the
-* application to service the driver without frame loss.  The DSP has 480
-* bytes of physical buffer memory for the record channel so the true
-* maximum limit is determined by how many frames will fit in the buffer.
-*
-* 1 uncompressed (480 byte) 16-bit linear frame.
-* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
-* 15 TrueSpeech 8.5 frames.
-* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
-*
-* The default in the driver is currently set to 2 frames.
-*
-* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
-* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
-* signal by 2.0, 0x80 scales the signal by 0.5.  No protection is given
-* against over-scaling, if the multiplication factor times the input
-* signal exceeds 16 bits, overflow distortion will occur.  The default
-* setting is 0x100 (1.0).
-*
-* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
-* the most recently recorded frame as a 16 bit value.
-******************************************************************************/
-
-#define IXJCTL_REC_CODEC                PHONE_REC_CODEC
-#define IXJCTL_REC_START                PHONE_REC_START
-#define IXJCTL_REC_STOP                 PHONE_REC_STOP
-#define IXJCTL_REC_DEPTH		PHONE_REC_DEPTH
-#define IXJCTL_FRAME			PHONE_FRAME
-#define IXJCTL_REC_VOLUME		PHONE_REC_VOLUME
-#define IXJCTL_REC_LEVEL		PHONE_REC_LEVEL
-
-typedef enum {
-	f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
-	f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
-	f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
-	f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
-	f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
-	f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
-	f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
-	f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
-	lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
-} IXJ_FILTER_FREQ;
-
-typedef struct {
-	unsigned int filter;
-	IXJ_FILTER_FREQ freq;
-	char enable;
-} IXJ_FILTER;
-
-typedef struct {
-	char enable;
-	char en_filter;
-	unsigned int filter;
-	unsigned int on1;
-	unsigned int off1;
-	unsigned int on2;
-	unsigned int off2;
-	unsigned int on3;
-	unsigned int off3;
-} IXJ_FILTER_CADENCE;
-
-#define IXJCTL_SET_FILTER		_IOW ('q', 0xC7, IXJ_FILTER *)
-#define IXJCTL_SET_FILTER_RAW		_IOW ('q', 0xDD, IXJ_FILTER_RAW *)
-#define IXJCTL_GET_FILTER_HIST		_IOW ('q', 0xC8, int)
-#define IXJCTL_FILTER_CADENCE		_IOW ('q', 0xD6, IXJ_FILTER_CADENCE *)
-#define IXJCTL_PLAY_CID			_IO  ('q', 0xD7)
-/******************************************************************************
-*
-* This IOCTL allows you to reassign values in the tone index table.  The
-* tone table has 32 entries (0 - 31), but the driver only allows entries
-* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
-* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
-* The positions used internally for Call Progress Tones are as follows:
-*    Dial Tone   - 25
-*    Ring Back   - 26
-*    Busy Signal - 27
-*
-* The freq values are calculated as:
-* freq = cos(2 * PI * frequency / 8000)
-*
-* The most commonly needed values are already calculated and listed in the
-* enum IXJ_TONE_FREQ.  Each tone index can have two frequencies with
-* different gains, if you are only using a single frequency set the unused
-* one to 0.
-*
-* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
-* increments.
-*
-******************************************************************************/
-
-typedef enum {
-	hz20 = 0x7ffa,
-	hz50 = 0x7fe5,
-	hz133 = 0x7f4c,
-	hz200 = 0x7e6b,
-	hz261 = 0x7d50,		/* .63 C1  */
-	hz277 = 0x7cfa,		/* .18 CS1 */
-	hz293 = 0x7c9f,		/* .66 D1  */
-	hz300 = 0x7c75,
-	hz311 = 0x7c32,		/* .13 DS1 */
-	hz329 = 0x7bbf,		/* .63 E1  */
-	hz330 = 0x7bb8,
-	hz340 = 0x7b75,
-	hz349 = 0x7b37,		/* .23 F1  */
-	hz350 = 0x7b30,
-	hz360 = 0x7ae9,
-	hz369 = 0x7aa8,		/* .99 FS1 */
-	hz380 = 0x7a56,
-	hz392 = 0x79fa,		/* .00 G1  */
-	hz400 = 0x79bb,
-	hz415 = 0x7941,		/* .30 GS1 */
-	hz420 = 0x7918,
-	hz425 = 0x78ee,
-	hz435 = 0x7899,
-	hz440 = 0x786d,		/* .00 A1  */
-	hz445 = 0x7842,
-	hz450 = 0x7815,
-	hz452 = 0x7803,
-	hz466 = 0x7784,		/* .16 AS1 */
-	hz475 = 0x7731,
-	hz480 = 0x7701,
-	hz493 = 0x7685,		/* .88 B1  */
-	hz494 = 0x767b,
-	hz500 = 0x7640,
-	hz520 = 0x7578,
-	hz523 = 0x7559,		/* .25 C2  */
-	hz525 = 0x7544,
-	hz540 = 0x74a7,
-	hz554 = 0x7411,		/* .37 CS2 */
-	hz587 = 0x72a1,		/* .33 D2  */
-	hz590 = 0x727f,
-	hz600 = 0x720b,
-	hz620 = 0x711e,
-	hz622 = 0x7106,		/* .25 DS2 */
-	hz659 = 0x6f3b,		/* .26 E2  */
-	hz660 = 0x6f2e,
-	hz698 = 0x6d3d,		/* .46 F2  */
-	hz700 = 0x6d22,
-	hz739 = 0x6b09,		/* .99 FS2 */
-	hz740 = 0x6afa,
-	hz750 = 0x6a6c,
-	hz770 = 0x694b,
-	hz783 = 0x688b,		/* .99 G2  */
-	hz800 = 0x678d,
-	hz816 = 0x6698,
-	hz830 = 0x65bf,		/* .61 GS2 */
-	hz850 = 0x6484,
-	hz857 = 0x6414,
-	hz880 = 0x629f,		/* .00 A2  */
-	hz900 = 0x6154,
-	hz932 = 0x5f35,		/* .33 AS2 */
-	hz935 = 0x5f01,
-	hz941 = 0x5e9a,
-	hz942 = 0x5e88,
-	hz950 = 0x5dfd,
-	hz975 = 0x5c44,
-	hz1000 = 0x5a81,
-	hz1020 = 0x5912,
-	hz1050 = 0x56e2,
-	hz1100 = 0x5320,
-	hz1140 = 0x5007,
-	hz1200 = 0x4b3b,
-	hz1209 = 0x4a80,
-	hz1215 = 0x4a02,
-	hz1250 = 0x471c,
-	hz1300 = 0x42e0,
-	hz1330 = 0x4049,
-	hz1336 = 0x3fc4,
-	hz1366 = 0x3d22,
-	hz1380 = 0x3be4,
-	hz1400 = 0x3a1b,
-	hz1450 = 0x3596,
-	hz1477 = 0x331c,
-	hz1500 = 0x30fb,
-	hz1600 = 0x278d,
-	hz1633 = 0x2462,
-	hz1638 = 0x23e7,
-	hz1645 = 0x233a,
-	hz1750 = 0x18f8,
-	hz1800 = 0x1405,
-	hz1860 = 0xe0b,
-	hz2100 = 0xf5f6,
-	hz2130 = 0xf2f5,
-	hz2450 = 0xd3b3,
-	hz2750 = 0xb8e4
-} IXJ_FREQ;
-
-typedef enum {
-	C1 = hz261,
-	CS1 = hz277,
-	D1 = hz293,
-	DS1 = hz311,
-	E1 = hz329,
-	F1 = hz349,
-	FS1 = hz369,
-	G1 = hz392,
-	GS1 = hz415,
-	A1 = hz440,
-	AS1 = hz466,
-	B1 = hz493,
-	C2 = hz523,
-	CS2 = hz554,
-	D2 = hz587,
-	DS2 = hz622,
-	E2 = hz659,
-	F2 = hz698,
-	FS2 = hz739,
-	G2 = hz783,
-	GS2 = hz830,
-	A2 = hz880,
-	AS2 = hz932,
-} IXJ_NOTE;
-
-typedef struct {
-	int tone_index;
-	int freq0;
-	int gain0;
-	int freq1;
-	int gain1;
-} IXJ_TONE;
-
-#define IXJCTL_INIT_TONE		_IOW ('q', 0xC9, IXJ_TONE *)
-
-/******************************************************************************
-*
-* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
-* Call Progress Tones (CPT).  This is accomplished by setting up an array of
-* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
-* the tone sequence.  The tone_on_time and tone_off time are in
-* 250 microsecond intervals.  A pointer to this array is passed to the
-* driver as the ce element of an IXJ_CADENCE structure.  The elements_used
-* must be set to the number of IXJ_CADENCE_ELEMENTS in the array.  The
-* termination variable defines what to do at the end of a cadence, the
-* options are to play the cadence once and stop, to repeat the last
-* element of the cadence indefinitely, or to repeat the entire cadence
-* indefinitely.  The ce variable is a pointer to the array of IXJ_TONE
-* structures.  If the freq0 variable is non-zero, the tone table contents
-* for the tone_index are updated to the frequencies and gains defined.  It
-* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
-* table indexes are used in a cadence the frequency and gain variables will
-* be ignored.
-*
-* If the array elements contain frequency parameters the driver will
-* initialize the needed tone table elements and begin playing the tone,
-* there is no preset limit on the number of elements in the cadence.  If
-* there is more than one frequency used in the cadence, sequential elements
-* of different frequencies MUST use different tone table indexes.  Only one
-* cadence can be played at a time.  It is possible to build complex
-* cadences with multiple frequencies using 2 tone table indexes by
-* alternating between them.
-*
-******************************************************************************/
-
-typedef struct {
-	int index;
-	int tone_on_time;
-	int tone_off_time;
-	int freq0;
-	int gain0;
-	int freq1;
-	int gain1;
-} IXJ_CADENCE_ELEMENT;
-
-typedef enum {
-	PLAY_ONCE,
-	REPEAT_LAST_ELEMENT,
-	REPEAT_ALL
-} IXJ_CADENCE_TERM;
-
-typedef struct {
-	int elements_used;
-	IXJ_CADENCE_TERM termination;
-	IXJ_CADENCE_ELEMENT __user *ce;
-} IXJ_CADENCE;
-
-#define IXJCTL_TONE_CADENCE		_IOW ('q', 0xCA, IXJ_CADENCE *)
-/******************************************************************************
-*
-* This group of IOCTLs deal with the playback settings of the DSP
-*
-******************************************************************************/
-
-#define IXJCTL_PLAY_CODEC               PHONE_PLAY_CODEC
-#define IXJCTL_PLAY_START               PHONE_PLAY_START
-#define IXJCTL_PLAY_STOP                PHONE_PLAY_STOP
-#define IXJCTL_PLAY_DEPTH		PHONE_PLAY_DEPTH
-#define IXJCTL_PLAY_VOLUME		PHONE_PLAY_VOLUME
-#define IXJCTL_PLAY_LEVEL		PHONE_PLAY_LEVEL
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
-* of the DSP
-*
-* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the
-* same effect as IXJCTL_AEC_STOP.  This is to simplify slider bar
-* controls.  IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC.
-******************************************************************************/
-#define IXJCTL_AEC_START		_IOW ('q', 0xCB, int)
-#define IXJCTL_AEC_STOP			_IO  ('q', 0xCC)
-#define IXJCTL_AEC_GET_LEVEL		_IO  ('q', 0xCD)
-
-#define AEC_OFF   0
-#define AEC_LOW   1
-#define AEC_MED   2
-#define AEC_HIGH  3
-#define AEC_AUTO  4
-#define AEC_AGC   5
-/******************************************************************************
-*
-* Call Progress Tones, DTMF, etc.
-* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band
-* only.  If you pass a 1, DTMF is suppressed from the audio stream.
-* Tone on and off times are in 250 microsecond intervals so
-* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
-* will set the tone on time of board ixj1 to 360 * 250us = 90ms
-* the default values of tone on and off times is 840 or 210ms
-******************************************************************************/
-
-#define IXJCTL_DTMF_READY		PHONE_DTMF_READY
-#define IXJCTL_GET_DTMF                 PHONE_GET_DTMF
-#define IXJCTL_GET_DTMF_ASCII           PHONE_GET_DTMF_ASCII
-#define IXJCTL_DTMF_OOB			PHONE_DTMF_OOB
-#define IXJCTL_EXCEPTION		PHONE_EXCEPTION
-#define IXJCTL_PLAY_TONE		PHONE_PLAY_TONE
-#define IXJCTL_SET_TONE_ON_TIME		PHONE_SET_TONE_ON_TIME
-#define IXJCTL_SET_TONE_OFF_TIME	PHONE_SET_TONE_OFF_TIME
-#define IXJCTL_GET_TONE_ON_TIME		PHONE_GET_TONE_ON_TIME
-#define IXJCTL_GET_TONE_OFF_TIME	PHONE_GET_TONE_OFF_TIME
-#define IXJCTL_GET_TONE_STATE		PHONE_GET_TONE_STATE
-#define IXJCTL_BUSY			PHONE_BUSY
-#define IXJCTL_RINGBACK			PHONE_RINGBACK
-#define IXJCTL_DIALTONE			PHONE_DIALTONE
-#define IXJCTL_CPT_STOP			PHONE_CPT_STOP
-
-/******************************************************************************
-* LineJACK specific IOCTLs
-*
-* The lsb 4 bits of the LED argument represent the state of each of the 4
-* LED's on the LineJACK
-******************************************************************************/
-
-#define IXJCTL_SET_LED			_IOW ('q', 0xCE, int)
-#define IXJCTL_MIXER			_IOW ('q', 0xCF, int)
-
-/******************************************************************************
-* 
-* The master volume controls use attenuation with 32 levels from 0 to -62dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-* 
-******************************************************************************/
-#define MIXER_MASTER_L		0x0000
-#define MIXER_MASTER_R		0x0100
-#define ATT00DB			0x00
-#define ATT02DB			0x01
-#define ATT04DB			0x02
-#define ATT06DB			0x03
-#define ATT08DB			0x04
-#define ATT10DB			0x05
-#define ATT12DB			0x06
-#define ATT14DB			0x07
-#define ATT16DB			0x08
-#define ATT18DB			0x09
-#define ATT20DB			0x0A
-#define ATT22DB			0x0B
-#define ATT24DB			0x0C
-#define ATT26DB			0x0D
-#define ATT28DB			0x0E
-#define ATT30DB			0x0F
-#define ATT32DB			0x10
-#define ATT34DB			0x11
-#define ATT36DB			0x12
-#define ATT38DB			0x13
-#define ATT40DB			0x14
-#define ATT42DB			0x15
-#define ATT44DB			0x16
-#define ATT46DB			0x17
-#define ATT48DB			0x18
-#define ATT50DB			0x19
-#define ATT52DB			0x1A
-#define ATT54DB			0x1B
-#define ATT56DB			0x1C
-#define ATT58DB			0x1D
-#define ATT60DB			0x1E
-#define ATT62DB			0x1F
-#define MASTER_MUTE		0x80
-
-/******************************************************************************
-* 
-* The input volume controls use gain with 32 levels from +12dB to -50dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-* 
-******************************************************************************/
-#define MIXER_PORT_CD_L		0x0600
-#define MIXER_PORT_CD_R		0x0700
-#define MIXER_PORT_LINE_IN_L	0x0800
-#define MIXER_PORT_LINE_IN_R	0x0900
-#define MIXER_PORT_POTS_REC	0x0C00
-#define MIXER_PORT_MIC		0x0E00
-
-#define GAIN12DB		0x00
-#define GAIN10DB		0x01
-#define GAIN08DB		0x02
-#define GAIN06DB		0x03
-#define GAIN04DB		0x04
-#define GAIN02DB		0x05
-#define GAIN00DB		0x06
-#define GAIN_02DB		0x07
-#define GAIN_04DB		0x08
-#define GAIN_06DB		0x09
-#define GAIN_08DB		0x0A
-#define GAIN_10DB		0x0B
-#define GAIN_12DB		0x0C
-#define GAIN_14DB		0x0D
-#define GAIN_16DB		0x0E
-#define GAIN_18DB		0x0F
-#define GAIN_20DB		0x10
-#define GAIN_22DB		0x11
-#define GAIN_24DB		0x12
-#define GAIN_26DB		0x13
-#define GAIN_28DB		0x14
-#define GAIN_30DB		0x15
-#define GAIN_32DB		0x16
-#define GAIN_34DB		0x17
-#define GAIN_36DB		0x18
-#define GAIN_38DB		0x19
-#define GAIN_40DB		0x1A
-#define GAIN_42DB		0x1B
-#define GAIN_44DB		0x1C
-#define GAIN_46DB		0x1D
-#define GAIN_48DB		0x1E
-#define GAIN_50DB		0x1F
-#define INPUT_MUTE		0x80
-
-/******************************************************************************
-* 
-* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
-* with steps of 4dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-* 
-******************************************************************************/
-#define MIXER_PORT_POTS_PLAY	0x0F00
-
-#define POTS_ATT_00DB		0x00
-#define POTS_ATT_04DB		0x01
-#define POTS_ATT_08DB		0x02
-#define POTS_ATT_12DB		0x03
-#define POTS_ATT_16DB		0x04
-#define POTS_ATT_20DB		0x05
-#define POTS_ATT_24DB		0x06
-#define POTS_ATT_28DB		0x07
-#define POTS_MUTE		0x80
-
-/******************************************************************************
-* 
-* The DAA controls the interface to the PSTN port.  The driver loads the
-* US coefficients by default, so if you live in a different country you
-* need to load the set for your countries phone system.
-* 
-******************************************************************************/
-#define IXJCTL_DAA_COEFF_SET		_IOW ('q', 0xD0, int)
-
-#define DAA_US 		1	/*PITA 8kHz */
-#define DAA_UK 		2	/*ISAR34 8kHz */
-#define DAA_FRANCE 	3	/* */
-#define DAA_GERMANY	4
-#define DAA_AUSTRALIA	5
-#define DAA_JAPAN	6
-
-/******************************************************************************
-* 
-* Use IXJCTL_PORT to set or query the port the card is set to.  If the
-* argument is set to PORT_QUERY, the return value of the ioctl will
-* indicate which port is currently in use, otherwise it will change the
-* port.
-* 
-******************************************************************************/
-#define IXJCTL_PORT			_IOW ('q', 0xD1, int)
-
-#define PORT_QUERY	0
-#define PORT_POTS	1
-#define PORT_PSTN	2
-#define PORT_SPEAKER	3
-#define PORT_HANDSET	4
-
-#define IXJCTL_PSTN_SET_STATE		PHONE_PSTN_SET_STATE
-#define IXJCTL_PSTN_GET_STATE		PHONE_PSTN_GET_STATE
-
-#define PSTN_ON_HOOK	0
-#define PSTN_RINGING	1
-#define PSTN_OFF_HOOK	2
-#define PSTN_PULSE_DIAL	3
-
-/******************************************************************************
-* 
-* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR), 
-* and the transmit gain (AGX).  OR together the components and pass them
-* as the parameter to IXJCTL_DAA_AGAIN.  The default setting is both at 0dB.
-* 
-******************************************************************************/
-#define IXJCTL_DAA_AGAIN		_IOW ('q', 0xD2, int)
-
-#define AGRR00DB	0x00	/* Analog gain in receive direction 0dB */
-#define AGRR3_5DB	0x10	/* Analog gain in receive direction 3.5dB */
-#define AGRR06DB	0x30	/* Analog gain in receive direction 6dB */
-
-#define AGX00DB		0x00	/* Analog gain in transmit direction 0dB */
-#define AGX_6DB		0x04	/* Analog gain in transmit direction -6dB */
-#define AGX3_5DB	0x08	/* Analog gain in transmit direction 3.5dB */
-#define AGX_2_5B	0x0C	/* Analog gain in transmit direction -2.5dB */
-
-#define IXJCTL_PSTN_LINETEST		_IO  ('q', 0xD3)
-
-#define IXJCTL_CID			_IOR ('q', 0xD4, PHONE_CID *)
-#define IXJCTL_VMWI			_IOR ('q', 0xD8, int)
-#define IXJCTL_CIDCW			_IOW ('q', 0xD9, PHONE_CID *)
-/******************************************************************************
-* 
-* The wink duration is tunable with this ioctl.  The default wink duration  
-* is 320ms.  You do not need to use this ioctl if you do not require a
-* different wink duration.
-* 
-******************************************************************************/
-#define IXJCTL_WINK_DURATION		PHONE_WINK_DURATION
-
-/******************************************************************************
-* 
-* This ioctl will connect the POTS port to the PSTN port on the LineJACK
-* In order for this to work properly the port selection should be set to
-* the PSTN port with IXJCTL_PORT prior to calling this ioctl.  This will
-* enable conference calls between PSTN callers and network callers.
-* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
-* passing a 0 turns it back off.
-* 
-******************************************************************************/
-#define IXJCTL_POTS_PSTN		_IOW ('q', 0xD5, int)
-
-/******************************************************************************
-*
-* IOCTLs added by request.
-*
-* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
-*           /usr/include/asm/param.h, this determines the fundamental
-*           frequency of the clock ticks on your Linux system.  The kernel
-*           must be rebuilt if you change this value, also all modules you
-*           use (except this one) must be recompiled.  The default value
-*           is 100, and you only need to use this IOCTL if you use some
-*           other value.
-*
-*
-* IXJCTL_RATE sets the number of times per second that the driver polls
-*             the DSP.  This value cannot be larger than HZ.  By
-*             increasing both of these values, you may be able to reduce
-*             latency because the max hang time that can exist between the
-*             driver and the DSP will be reduced.
-*
-******************************************************************************/
-
-#define IXJCTL_HZ                       _IOW ('q', 0xE0, int)
-#define IXJCTL_RATE                     _IOW ('q', 0xE1, int)
-#define IXJCTL_FRAMES_READ		_IOR ('q', 0xE2, unsigned long)
-#define IXJCTL_FRAMES_WRITTEN		_IOR ('q', 0xE3, unsigned long)
-#define IXJCTL_READ_WAIT		_IOR ('q', 0xE4, unsigned long)
-#define IXJCTL_WRITE_WAIT		_IOR ('q', 0xE5, unsigned long)
-#define IXJCTL_DRYBUFFER_READ		_IOR ('q', 0xE6, unsigned long)
-#define IXJCTL_DRYBUFFER_CLEAR		_IO  ('q', 0xE7)
-#define IXJCTL_DTMF_PRESCALE		_IOW ('q', 0xE8, int)
-
-/******************************************************************************
-*
-* This ioctl allows the user application to control what events the driver
-* will send signals for, and what signals it will send for which event.
-* By default, if signaling is enabled, all events will send SIGIO when
-* they occur.  To disable signals for an event set the signal to 0.
-*
-******************************************************************************/
-typedef enum {
-	SIG_DTMF_READY,
-	SIG_HOOKSTATE,
-	SIG_FLASH,
-	SIG_PSTN_RING,
-	SIG_CALLER_ID,
-	SIG_PSTN_WINK,
-	SIG_F0, SIG_F1, SIG_F2, SIG_F3,
-	SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3,
-	SIG_READ_READY = 33,
-	SIG_WRITE_READY = 34
-} IXJ_SIGEVENT;
-
-typedef struct {
-	unsigned int event;
-	int signal;
-} IXJ_SIGDEF;
-
-#define IXJCTL_SIGCTL			_IOW ('q', 0xE9, IXJ_SIGDEF *)
-
-/******************************************************************************
-*
-* These ioctls allow the user application to change the gain in the 
-* Smart Cable of the Internet Phone Card.  Sending -1 as a value will cause
-* return value to be the current setting.  Valid values to set are 0x00 - 0x1F
-*
-* 11111 = +12 dB
-* 10111 =   0 dB
-* 00000 = -34.5 dB
-*
-* IXJCTL_SC_RXG sets the Receive gain
-* IXJCTL_SC_TXG sets the Transmit gain
-*
-******************************************************************************/
-#define IXJCTL_SC_RXG			_IOW ('q', 0xEA, int)
-#define IXJCTL_SC_TXG			_IOW ('q', 0xEB, int)
-
-/******************************************************************************
-*
-* The intercom IOCTL's short the output from one card to the input of the
-* other and vice versa (actually done in the DSP read function).  It is only
-* necessary to execute the IOCTL on one card, but it is necessary to have
-* both devices open to be able to detect hook switch changes.  The record
-* codec and rate of each card must match the playback codec and rate of
-* the other card for this to work properly.
-*
-******************************************************************************/
-
-#define IXJCTL_INTERCOM_START 		_IOW ('q', 0xFD, int)
-#define IXJCTL_INTERCOM_STOP  		_IOW ('q', 0xFE, int)
-
-/******************************************************************************
- *
- * new structure for accessing raw filter information
- *
- ******************************************************************************/
-
-typedef struct {
-	unsigned int filter;
-	char enable;
-	unsigned int coeff[19];
-} IXJ_FILTER_RAW;
-
-#endif
diff --git a/include/uapi/linux/telephony.h b/include/uapi/linux/telephony.h
deleted file mode 100644
index d2c9f7105f4b..000000000000
--- a/include/uapi/linux/telephony.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-/******************************************************************************
- *
- *		telephony.h
- *
- *		Basic Linux Telephony Interface
- *
- *		(c) Copyright 1999-2001 Quicknet Technologies, Inc.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- *    Authors:       Ed Okerson, <eokerson@quicknet.net>
- *                   Greg Herlein, <gherlein@quicknet.net>
- *
- *    Contributors:  Alan Cox, <alan@lxorguk.ukuu.org.uk>
- *                   David W. Erhart, <derhart@quicknet.net>
- *
- * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
- * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
- * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- *****************************************************************************/
-
-#ifndef TELEPHONY_H
-#define TELEPHONY_H
-
-#define TELEPHONY_VERSION 3013
-
-#define PHONE_VENDOR_IXJ          1
-#define PHONE_VENDOR_QUICKNET	  PHONE_VENDOR_IXJ
-#define PHONE_VENDOR_VOICETRONIX  2
-#define PHONE_VENDOR_ACULAB       3
-#define PHONE_VENDOR_DIGI         4
-#define PHONE_VENDOR_FRANKLIN     5
-
-/******************************************************************************
- *  Vendor Summary Information Area
- *
- *  Quicknet Technologies, Inc. - makes low density analog telephony cards
- *    with audio compression, POTS and PSTN interfaces (www.quicknet.net)
- *
- *  (other vendors following this API shuld add a short description of
- *  the telephony products they support under Linux)
- *
- *****************************************************************************/
-#define QTI_PHONEJACK		100
-#define QTI_LINEJACK		300
-#define QTI_PHONEJACK_LITE	400
-#define QTI_PHONEJACK_PCI	500
-#define QTI_PHONECARD		600
-
-/******************************************************************************
-*
-* The capabilities ioctls can inform you of the capabilities of each phone
-* device installed in your system.  The PHONECTL_CAPABILITIES ioctl
-* returns an integer value indicating the number of capabilities the   
-* device has.  The PHONECTL_CAPABILITIES_LIST will fill an array of 
-* capability structs with all of its capabilities.  The
-* PHONECTL_CAPABILITIES_CHECK takes a single capability struct and returns
-* a TRUE if the device has that capability, otherwise it returns false.
-* 
-******************************************************************************/
-typedef enum {
-	vendor = 0,
-	device,
-	port,
-	codec,
-	dsp
-} phone_cap;
-
-struct phone_capability {
-	char desc[80];
-	phone_cap captype;
-	int cap;
-	int handle;
-};
-
-typedef enum {
-	pots = 0,
-	pstn,
-	handset,
-	speaker
-} phone_ports;
-
-#define PHONE_CAPABILITIES              _IO  ('q', 0x80)
-#define PHONE_CAPABILITIES_LIST         _IOR ('q', 0x81, struct phone_capability *)
-#define PHONE_CAPABILITIES_CHECK        _IOW ('q', 0x82, struct phone_capability *)
-
-typedef struct {
-        char month[3];
-        char day[3];
-        char hour[3];
-        char min[3];
-        int numlen;
-        char number[11];
-        int namelen;
-        char name[80];
-} PHONE_CID;
- 
-#define PHONE_RING			_IO  ('q', 0x83)
-#define PHONE_HOOKSTATE			_IO  ('q', 0x84)
-#define PHONE_MAXRINGS			_IOW ('q', 0x85, char)
-#define PHONE_RING_CADENCE		_IOW ('q', 0x86, short)
-#define OLD_PHONE_RING_START            _IO  ('q', 0x87)
-#define PHONE_RING_START		_IOW ('q', 0x87, PHONE_CID *)
-#define PHONE_RING_STOP			_IO  ('q', 0x88)
-
-#define USA_RING_CADENCE	 0xC0C0
-
-#define PHONE_REC_CODEC			_IOW ('q', 0x89, int)
-#define PHONE_REC_START			_IO  ('q', 0x8A)
-#define PHONE_REC_STOP			_IO  ('q', 0x8B)
-#define PHONE_REC_DEPTH			_IOW ('q', 0x8C, int)
-#define PHONE_FRAME			_IOW ('q', 0x8D, int)
-#define PHONE_REC_VOLUME		_IOW ('q', 0x8E, int)
-#define PHONE_REC_VOLUME_LINEAR		_IOW ('q', 0xDB, int)
-#define PHONE_REC_LEVEL			_IO  ('q', 0x8F)
-
-#define PHONE_PLAY_CODEC		_IOW ('q', 0x90, int)
-#define PHONE_PLAY_START		_IO  ('q', 0x91)
-#define PHONE_PLAY_STOP			_IO  ('q', 0x92)
-#define PHONE_PLAY_DEPTH		_IOW ('q', 0x93, int)
-#define PHONE_PLAY_VOLUME		_IOW ('q', 0x94, int)
-#define PHONE_PLAY_VOLUME_LINEAR	_IOW ('q', 0xDC, int)
-#define PHONE_PLAY_LEVEL		_IO  ('q', 0x95)
-#define PHONE_DTMF_READY		_IOR ('q', 0x96, int)
-#define PHONE_GET_DTMF			_IOR ('q', 0x97, int)
-#define PHONE_GET_DTMF_ASCII		_IOR ('q', 0x98, int)
-#define PHONE_DTMF_OOB			_IOW ('q', 0x99, int)
-#define PHONE_EXCEPTION			_IOR ('q', 0x9A, int)
-#define PHONE_PLAY_TONE			_IOW ('q', 0x9B, char)
-#define PHONE_SET_TONE_ON_TIME		_IOW ('q', 0x9C, int)
-#define PHONE_SET_TONE_OFF_TIME		_IOW ('q', 0x9D, int)
-#define PHONE_GET_TONE_ON_TIME		_IO  ('q', 0x9E)
-#define PHONE_GET_TONE_OFF_TIME		_IO  ('q', 0x9F)
-#define PHONE_GET_TONE_STATE		_IO  ('q', 0xA0)
-#define PHONE_BUSY			_IO  ('q', 0xA1)
-#define PHONE_RINGBACK			_IO  ('q', 0xA2)
-#define PHONE_DIALTONE			_IO  ('q', 0xA3)
-#define PHONE_CPT_STOP			_IO  ('q', 0xA4)
-
-#define PHONE_PSTN_SET_STATE		_IOW ('q', 0xA4, int)
-#define PHONE_PSTN_GET_STATE		_IO  ('q', 0xA5)
-
-#define PSTN_ON_HOOK		0
-#define PSTN_RINGING		1
-#define PSTN_OFF_HOOK		2
-#define PSTN_PULSE_DIAL		3
-
-/******************************************************************************
-* 
-* The wink duration is tunable with this ioctl.  The default wink duration  
-* is 320ms.  You do not need to use this ioctl if you do not require a
-* different wink duration.
-* 
-******************************************************************************/
-#define PHONE_WINK_DURATION		_IOW ('q', 0xA6, int)
-#define PHONE_WINK			_IOW ('q', 0xAA, int)
-
-/******************************************************************************
-* 
-*  Codec Definitions
-* 
-******************************************************************************/
-typedef enum {
-	G723_63 = 1,
-	G723_53 = 2,
-	TS85 = 3,
-	TS48 = 4,
-	TS41 = 5,
-	G728 = 6,
-	G729 = 7,
-	ULAW = 8,
-	ALAW = 9,
-	LINEAR16 = 10,
-	LINEAR8 = 11,
-	WSS = 12,
-	G729B = 13
-} phone_codec;
-
-struct phone_codec_data
-{
-        phone_codec type;
-        unsigned short buf_min, buf_opt, buf_max;
-};
-
-#define PHONE_QUERY_CODEC               _IOWR ('q', 0xA7, struct phone_codec_data *)
-#define PHONE_PSTN_LINETEST             _IO ('q', 0xA8)
-
-/******************************************************************************
-* 
-* This controls the VAD/CNG functionality of G.723.1.  The driver will
-* always pass full size frames, any unused bytes will be padded with zeros,
-* and frames passed to the driver should also be padded with zeros.  The
-* frame type is encoded in the least significant two bits of the first
-* WORD of the frame as follows:
-*
-* bits 1-0	Frame Type	Data Rate		Significant Words
-* 00		0		G.723.1 6.3		12
-* 01		1		G.723.1 5.3		10
-* 10		2		VAD/CNG			 2
-* 11		3		Repeat last CNG		 2 bits
-* 
-******************************************************************************/
-#define PHONE_VAD			_IOW ('q', 0xA9, int)
-
-
-/******************************************************************************
-*
-* The exception structure allows us to multiplex multiple events onto the
-* select() exception set.  If any of these flags are set select() will
-* return with a positive indication on the exception set.  The dtmf_ready
-* bit indicates if there is data waiting in the DTMF buffer.  The
-* hookstate bit is set if there is a change in hookstate status, it does not
-* indicate the current state of the hookswitch.  The pstn_ring bit
-* indicates that the DAA on a LineJACK card has detected ring voltage on
-* the PSTN port.  The caller_id bit indicates that caller_id data has been
-* received and is available.  The pstn_wink bit indicates that the DAA on
-* the LineJACK has received a wink from the telco switch.  The f0, f1, f2
-* and f3 bits indicate that the filter has been triggered by detecting the
-* frequency programmed into that filter.
-*
-* The remaining bits should be set to zero. They will become defined over time
-* for other interface cards and their needs.
-*
-******************************************************************************/
-struct phone_except
-{
-	unsigned int dtmf_ready:1;
-	unsigned int hookstate:1;
-	unsigned int pstn_ring:1;
-	unsigned int caller_id:1;
-	unsigned int pstn_wink:1;
-	unsigned int f0:1;
-	unsigned int f1:1;
-	unsigned int f2:1;
-	unsigned int f3:1;
-	unsigned int flash:1;
-	unsigned int fc0:1;
-	unsigned int fc1:1;
-	unsigned int fc2:1;
-	unsigned int fc3:1;
-	unsigned int reserved:18;
-};
-
-union telephony_exception {
-	struct phone_except bits;
-	unsigned int bytes;
-};
-
-
-#endif		/* TELEPHONY_H */
-