Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "This is the powerpc new goodies for 3.17.  The short story:

  The biggest bit is Michael removing all of pre-POWER4 processor
  support from the 64-bit kernel.  POWER3 and rs64.  This gets rid of a
  ton of old cruft that has been bitrotting in a long while.  It was
  broken for quite a few versions already and nobody noticed.  Nobody
  uses those machines anymore.  While at it, he cleaned up a bunch of
  old dusty cabinets, getting rid of a skeletton or two.

  Then, we have some base VFIO support for KVM, which allows assigning
  of PCI devices to KVM guests, support for large 64-bit BARs on
  "powernv" platforms, support for HMI (Hardware Management Interrupts)
  on those same platforms, some sparse-vmemmap improvements (for memory
  hotplug),

  There is the usual batch of Freescale embedded updates (summary in the
  merge commit) and fixes here or there, I think that's it for the
  highlights"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits)
  powerpc/eeh: Export eeh_iommu_group_to_pe()
  powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API
  powerpc: Reduce scariness of interrupt frames in stack traces
  powerpc: start loop at section start of start in vmemmap_populated()
  powerpc: implement vmemmap_free()
  powerpc: implement vmemmap_remove_mapping() for BOOK3S
  powerpc: implement vmemmap_list_free()
  powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE
  powerpc/book3s: Fix endianess issue for HMI handling on napping cpus.
  powerpc/book3s: handle HMIs for cpus in nap mode.
  powerpc/powernv: Invoke opal call to handle hmi.
  powerpc/book3s: Add basic infrastructure to handle HMI in Linux.
  powerpc/iommu: Fix comments with it_page_shift
  powerpc/powernv: Handle compound PE in config accessors
  powerpc/powernv: Handle compound PE for EEH
  powerpc/powernv: Handle compound PE
  powerpc/powernv: Split ioda_eeh_get_state()
  powerpc/powernv: Allow to freeze PE
  powerpc/powernv: Enable M64 aperatus for PHB3
  powerpc/eeh: Aux PE data for error log
  ...

2 files changed, 57 insertions, 0 deletions

diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index 8ec980b5e3af..25a0fbd4b998 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -98,4 +98,27 @@ extern int vfio_external_user_iommu_id(struct vfio_group *group);
 extern long vfio_external_check_extension(struct vfio_group *group,
 					  unsigned long arg);
 
+#ifdef CONFIG_EEH
+extern int vfio_spapr_pci_eeh_open(struct pci_dev *pdev);
+extern void vfio_spapr_pci_eeh_release(struct pci_dev *pdev);
+extern long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
+				       unsigned int cmd,
+				       unsigned long arg);
+#else
+static inline int vfio_spapr_pci_eeh_open(struct pci_dev *pdev)
+{
+	return 0;
+}
+
+static inline void vfio_spapr_pci_eeh_release(struct pci_dev *pdev)
+{
+}
+
+static inline long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group,
+					      unsigned int cmd,
+					      unsigned long arg)
+{
+	return -ENOTTY;
+}
+#endif /* CONFIG_EEH */
 #endif /* VFIO_H */
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index cb9023d4f063..6612974c64bf 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -30,6 +30,9 @@
  */
 #define VFIO_DMA_CC_IOMMU		4
 
+/* Check if EEH is supported */
+#define VFIO_EEH			5
+
 /*
  * The IOCTL interface is designed for extensibility by embedding the
  * structure length (argsz) and flags into structures passed between
@@ -455,6 +458,37 @@ struct vfio_iommu_spapr_tce_info {
 
 #define VFIO_IOMMU_SPAPR_TCE_GET_INFO	_IO(VFIO_TYPE, VFIO_BASE + 12)
 
+/*
+ * EEH PE operation struct provides ways to:
+ * - enable/disable EEH functionality;
+ * - unfreeze IO/DMA for frozen PE;
+ * - read PE state;
+ * - reset PE;
+ * - configure PE.
+ */
+struct vfio_eeh_pe_op {
+	__u32 argsz;
+	__u32 flags;
+	__u32 op;
+};
+
+#define VFIO_EEH_PE_DISABLE		0	/* Disable EEH functionality */
+#define VFIO_EEH_PE_ENABLE		1	/* Enable EEH functionality  */
+#define VFIO_EEH_PE_UNFREEZE_IO		2	/* Enable IO for frozen PE   */
+#define VFIO_EEH_PE_UNFREEZE_DMA	3	/* Enable DMA for frozen PE  */
+#define VFIO_EEH_PE_GET_STATE		4	/* PE state retrieval        */
+#define  VFIO_EEH_PE_STATE_NORMAL	0	/* PE in functional state    */
+#define  VFIO_EEH_PE_STATE_RESET	1	/* PE reset in progress      */
+#define  VFIO_EEH_PE_STATE_STOPPED	2	/* Stopped DMA and IO        */
+#define  VFIO_EEH_PE_STATE_STOPPED_DMA	4	/* Stopped DMA only          */
+#define  VFIO_EEH_PE_STATE_UNAVAIL	5	/* State unavailable         */
+#define VFIO_EEH_PE_RESET_DEACTIVATE	5	/* Deassert PE reset         */
+#define VFIO_EEH_PE_RESET_HOT		6	/* Assert hot reset          */
+#define VFIO_EEH_PE_RESET_FUNDAMENTAL	7	/* Assert fundamental reset  */
+#define VFIO_EEH_PE_CONFIGURE		8	/* PE configuration          */
+
+#define VFIO_EEH_PE_OP			_IO(VFIO_TYPE, VFIO_BASE + 21)
+
 /* ***************************************************************** */
 
 #endif /* _UAPIVFIO_H */