Merge tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "There is an ACPI stubs fix which is ACKed by the ACPI maintainer for
  merging through my tree.

  One item stand out and that is that I delete the <linux/sdb.h> header
  that is used by nothing. I deleted this subsystem (through the GPIO
  tree) a while back so I feel responsible for tidying up the floor.

  Other than that it is the usual mistakes, a bit noisy around build
  issue and Kconfig then driver fixes.

  Specifics:

   - Fix some stubs causing compile issues for ACPI.

   - Fix some wakeups on AMD IRQs shared between GPIO and SCI.

   - Fix a build warning in the Tegra driver.

   - Fix a Kconfig issue in the Qualcomm driver.

   - Add a missing include the RALink driver.

   - Return a valid type for the Apple pinctrl IRQs.

   - Implement some Qualcomm SDM845 dual-edge errata.

   - Remove the unused <linux/sdb.h> header. (The subsystem was once
     deleted by the pinctrl maintainer...)

   - Fix a duplicate initialized in the Tegra driver.

   - Fix register offsets for UFS and SDC in the Qualcomm SM8350 driver"

* tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: sm8350: Correct UFS and SDC offsets
  pinctrl: tegra194: remove duplicate initializer again
  Remove unused header <linux/sdb.h>
  pinctrl: qcom: sdm845: Enable dual edge errata
  pinctrl: apple: Always return valid type in apple_gpio_irq_type
  pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c'
  pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP
  pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group()
  pinctrl: amd: Fix wakeups when IRQ is shared with SCI
  ACPI: Add stubs for wakeup handler functions

2 files changed, 9 insertions, 160 deletions

diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 143ce7e0bee1..668d007f0917 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -974,6 +974,15 @@ static inline int acpi_get_local_address(acpi_handle handle, u32 *addr)
 	return -ENODEV;
 }
 
+static inline int acpi_register_wakeup_handler(int wake_irq,
+	bool (*wakeup)(void *context), void *context)
+{
+	return -ENXIO;
+}
+
+static inline void acpi_unregister_wakeup_handler(
+	bool (*wakeup)(void *context), void *context) { }
+
 #endif	/* !CONFIG_ACPI */
 
 #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
diff --git a/include/linux/sdb.h b/include/linux/sdb.h
deleted file mode 100644
index a2404a2bbd10..000000000000
--- a/include/linux/sdb.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This is the official version 1.1 of sdb.h
- */
-#ifndef __SDB_H__
-#define __SDB_H__
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
-
-/*
- * All structures are 64 bytes long and are expected
- * to live in an array, one for each interconnect.
- * Most fields of the structures are shared among the
- * various types, and most-specific fields are at the
- * beginning (for alignment reasons, and to keep the
- * magic number at the head of the interconnect record
- */
-
-/* Product, 40 bytes at offset 24, 8-byte aligned
- *
- * device_id is vendor-assigned; version is device-specific,
- * date is hex (e.g 0x20120501), name is UTF-8, blank-filled
- * and not terminated with a 0 byte.
- */
-struct sdb_product {
-	uint64_t		vendor_id;	/* 0x18..0x1f */
-	uint32_t		device_id;	/* 0x20..0x23 */
-	uint32_t		version;	/* 0x24..0x27 */
-	uint32_t		date;		/* 0x28..0x2b */
-	uint8_t			name[19];	/* 0x2c..0x3e */
-	uint8_t			record_type;	/* 0x3f */
-};
-
-/*
- * Component, 56 bytes at offset 8, 8-byte aligned
- *
- * The address range is first to last, inclusive
- * (for example 0x100000 - 0x10ffff)
- */
-struct sdb_component {
-	uint64_t		addr_first;	/* 0x08..0x0f */
-	uint64_t		addr_last;	/* 0x10..0x17 */
-	struct sdb_product	product;	/* 0x18..0x3f */
-};
-
-/* Type of the SDB record */
-enum sdb_record_type {
-	sdb_type_interconnect	= 0x00,
-	sdb_type_device		= 0x01,
-	sdb_type_bridge		= 0x02,
-	sdb_type_integration	= 0x80,
-	sdb_type_repo_url	= 0x81,
-	sdb_type_synthesis	= 0x82,
-	sdb_type_empty		= 0xFF,
-};
-
-/* Type 0: interconnect (first of the array)
- *
- * sdb_records is the length of the table including this first
- * record, version is 1. The bus type is enumerated later.
- */
-#define				SDB_MAGIC	0x5344422d /* "SDB-" */
-struct sdb_interconnect {
-	uint32_t		sdb_magic;	/* 0x00-0x03 */
-	uint16_t		sdb_records;	/* 0x04-0x05 */
-	uint8_t			sdb_version;	/* 0x06 */
-	uint8_t			sdb_bus_type;	/* 0x07 */
-	struct sdb_component	sdb_component;	/* 0x08-0x3f */
-};
-
-/* Type 1: device
- *
- * class is 0 for "custom device", other values are
- * to be standardized; ABI version is for the driver,
- * bus-specific bits are defined by each bus (see below)
- */
-struct sdb_device {
-	uint16_t		abi_class;	/* 0x00-0x01 */
-	uint8_t			abi_ver_major;	/* 0x02 */
-	uint8_t			abi_ver_minor;	/* 0x03 */
-	uint32_t		bus_specific;	/* 0x04-0x07 */
-	struct sdb_component	sdb_component;	/* 0x08-0x3f */
-};
-
-/* Type 2: bridge
- *
- * child is the address of the nested SDB table
- */
-struct sdb_bridge {
-	uint64_t		sdb_child;	/* 0x00-0x07 */
-	struct sdb_component	sdb_component;	/* 0x08-0x3f */
-};
-
-/* Type 0x80: integration
- *
- * all types with bit 7 set are meta-information, so
- * software can ignore the types it doesn't know. Here we
- * just provide product information for an aggregate device
- */
-struct sdb_integration {
-	uint8_t			reserved[24];	/* 0x00-0x17 */
-	struct sdb_product	product;	/* 0x08-0x3f */
-};
-
-/* Type 0x81: Top module repository url
- *
- * again, an informative field that software can ignore
- */
-struct sdb_repo_url {
-	uint8_t			repo_url[63];	/* 0x00-0x3e */
-	uint8_t			record_type;	/* 0x3f */
-};
-
-/* Type 0x82: Synthesis tool information
- *
- * this informative record
- */
-struct sdb_synthesis {
-	uint8_t			syn_name[16];	/* 0x00-0x0f */
-	uint8_t			commit_id[16];	/* 0x10-0x1f */
-	uint8_t			tool_name[8];	/* 0x20-0x27 */
-	uint32_t		tool_version;	/* 0x28-0x2b */
-	uint32_t		date;		/* 0x2c-0x2f */
-	uint8_t			user_name[15];	/* 0x30-0x3e */
-	uint8_t			record_type;	/* 0x3f */
-};
-
-/* Type 0xff: empty
- *
- * this allows keeping empty slots during development,
- * so they can be filled later with minimal efforts and
- * no misleading description is ever shipped -- hopefully.
- * It can also be used to pad a table to a desired length.
- */
-struct sdb_empty {
-	uint8_t			reserved[63];	/* 0x00-0x3e */
-	uint8_t			record_type;	/* 0x3f */
-};
-
-/* The type of bus, for bus-specific flags */
-enum sdb_bus_type {
-	sdb_wishbone = 0x00,
-	sdb_data     = 0x01,
-};
-
-#define SDB_WB_WIDTH_MASK	0x0f
-#define SDB_WB_ACCESS8			0x01
-#define SDB_WB_ACCESS16			0x02
-#define SDB_WB_ACCESS32			0x04
-#define SDB_WB_ACCESS64			0x08
-#define SDB_WB_LITTLE_ENDIAN	0x80
-
-#define SDB_DATA_READ		0x04
-#define SDB_DATA_WRITE		0x02
-#define SDB_DATA_EXEC		0x01
-
-#endif /* __SDB_H__ */